200KHz Handheld Mini DSO Oscilloscope 35797 TE

Palm sized single channel Digital Storage Oscilloscope.
2.4-inch Color TFT LCD 320 x 240 resolution
Vertical
Input: BNC Female
Channel:: 1
Bandwidth: 0 - 200KHz
Sensitivity: 5mV/Div - 20V/Div
Accuracy: 5%
Resolution: 12-bit
Input Impedance: 1M ohm
Maximum Input Voltage: 50Vpk (DC/AC/DC+AC)
Coupling: Selectable DC, AC, GND
[Horizontal]
Real-time Sampling Rate: 1Msps Max
Timebase: 10us/Div - 500s/Div
Record Length: 1024
[Trigger]
Modes: Auto, Normal, Single
Types: Rising/falling edge
Trigger Position: 1/2 of buffer size fixed
Power: 8-10VDC 9V Nominal
Supply Current: 120mA @ 9V
Power Connector: 5.5/2.5mm Coaxial Jack
Includes: 33" Plug Supply and 18" BNC to Alligator Clip Lead
H: 4-1/2" O/A W: 3" T: 1-1/8" WT: .03

[@ovalwingnut]

Good (comfortable) "next door neighbor" style review. I actually feel more knowledgable after watching. I.E. scratched that curiosity itch. Thank you 👍😁

[@monchito7777]

Thank you for this informative video I have been a costumer for a few years looks like something to add to the bench..

[@physicsisawesome696]

Is it readymade or we need to assemble all the components of this oscilloscope?

[@gavinthomas214]

Thank you, this information helped a newbie to understand this useful little tool.

[@nickgc1234]

you know a lot about this stuff im just getting into this. could you tell me if this would work on a car to check to see if there is a data stream to ecu or signal to maf etc

[@giosant5327]

I was thinking about the same thing i use it on my car audio amplifiers to see clipping of a sine wave! I think its possible not quite sure about the frequency in which canbus works

[@kevinhoublon8630]

Hi, great video 😄.
I'm a beginner and I have a question :
Can I use this oscilloscope to detect falling / rising edge on push buttons?
I'm trying to se the bouncing effect on push buttons and the effects of the condensateur to limit this phenomenon.
Thank you in advance.
Cordially.

[@physicsisawesome696]

What is the price of the oscilloscope?

[@KC-vp7wn]

Could I use a 10X probe on it to read higher voltages?

[@Geoffh777]

Yes, you can

[@mastertronics95]

3.4 volts peak to peak 1khz

[@winandd8649]

Mind that you have a non genuine KYE unit, exactly the same as mine.. The very old firmware version 062, and even the same serial number 🙂. Don't update the firmware, you'll brick the device.
ruclips.net/video/ZGrSz_GBZuA/видео.html

[@robertchauvin486]

You done lost me big time

[@calebs4899]

Worse teacher ever. Slow down

[@gabrielware2777]

I had no problem following the video😮