Lathe restoration
HTML-код
- Опубликовано: 28 июл 2019
- Hope you guys enjoy the video. Been too busy last few months but really happy that i finally finished this restoration project - (WASINO 550 - made in Japan - 5 horsepower)
Thank you so much for watching! new videos are coming up this week (i hope lol)
Thanks for the support: / calem21 - Наука
Ok taking it apart is one thing but put it back together so that no screws remain and it works...that is a challenge. Gj bro you got ballz!
He does more then that covers bare areas with paint that are bare for no reason... he also lubricates it and removes rust etc etc wiring probably a lot!
Hi,
Please watch our mini metal lathe restoration.
I'm speechless with the results! Just a great job.
We've also made mini metal lath restoration.
SPLENDID RESTORED WORK!!!
It’s so beautiful. You did a wonderful job on returning this lathe to its former glory. These old Japanese lathes were built to last.
If I disassemble and reassemble a machine like that, it would probably remain enough parts to build a new one.
I was thinking the same about myself.
😂😂😂
One of the most impressive restorations on yt.
Also check our lath restoration
Viewing this video was a calming joy. To see something of such practical importance, once-neglected, but now revived with the care that it deserves, was a fantastic experience. You, Sir, are a testament to patience, dedication, and skill. Thank you. (I will now share this with at least 15 people who will, as I did, sit spellbound as they watch it.)
thank you!!!
This is absolutely beautiful work man. I really appreciate people who care for their tools, and are able to give a used and abused machine some much-needed care and attention.
I like seeing a young man taking an interest in restoring and repairing old equipment. Good Job.
Beautiful old lathe with hardly any wear! We can't find anything like it here in the states. Very heavy duty clean old lathes are impossible to find here. Most shops sold them for scrap when they switched to CNC (or went out of business). You did a fine job, I am jealous.
professormag really I found in the last year multiple Monarch lathe from World War II in perfect condition for 2500 bucks where are you looking
@@plymouth-hl20ton37 Southern US, nothing anywhere as nice as what Cà Lem Found. If you look closely, his doesn't have any wear on the ways. That is my standard. All the photos of lathes for sale should include the first foot (or two) of the ways, but its usually hidden (on purpose?).
We have a 1951 Lodge and Shipley Model X in really good condition. There's hardly any wear on even the most traveled areas of the ways and virtually zero(.002) backlash. Our 61 Southbend however.... Can still hold a thou but it's one I would like to restore in the future.
@@plymouth-hl20ton37 Where did you find multiple Monarch engine lathes in perfect condition for $2500?
@@michaelbaker9839 one of them sitting in my friend's garage has flame hardened ways pristine condition I don't know where you're from but I'm from Ohio and there's a place up in Cleveland they've had quite a few, I've gotten a nice Bridgeport good shape digital readouts power feed but no head for $900 ways were very good shape
When I saw you chipping away at the concrete floor with hand tools I said "man that will take 3 years"... 2 seconds later, it says 3 years later on the screen. Iwas laughing hard...
I do not know if it was intentional but the two tone green actually looks really good. It gave the machine more depth. very quality work.
I had a heart pounding moment at teh "stay there" scene.
Yeah, I would not have chipped out my floor, image of he ever has to move it again, or level it.
Great job though.
Lots of stuff inside, even more complex than a manual car gearbox!
It' s brand new! Congratulations!
This is amazing. I know nothing about lathes but they kept me fascinated until the end. Great job
👍 color looks good and restoration was impressive.
Hey buddy, That lathe looks great. Nice to see you post a video again. I have a 1940s Southbend lathe a friend gave me I need to restore also. Now lets see you make some chips on it.
Almost makes me want to dredge up an old lathe from the bottom of a river someplace and start a project. Love the subtle 2-tone green. Very nice work. It's hard to kill these machines.
Took me 4 months to restore a 1984 4runner (from the ground up without new paint), I spent everyday to work on it during my 2 and a half summer vacation months. If I leave it for 3 years I may not be able to find all nuts and bolts. You did great on this lathe, always love old stuff.
Beautiful work! I am so glad to see you making videos again, we missed you. 👍🏼
i missed you guys too ;)
This is really amazing. Everyone has already said all the good things here, so all I can say is Ditto! This was an enormous undertaking for one person.
Amazing result! Thanks for giving the old lathe new life.
And I love your humour, haha. Looking forward to the next video.
Awesome job!! I worked for a company were we would replace all the electrical on lathes an many other industrial machinery that were being resold.
Мне иногда кажется, что эти видео по реставрации снимают для того, чтобы потом понимать, как его собирать обратно ))
Youre doing all that by your self, youre a badass dude
You are a BOSS taking on that restoration! Beautiful job! I feel confident I could take it apart and clean and paint it . . . unfortunately it would stay in bits and pieces and I would despair in putting it back together in working order like you did. I am really impressed - thanks for sharing for others like myself to learn and be amazed by.
Your dedication to restoration is so relaxing to watch. Just magical.
A working engine lathe is a thing of beauty and a joy forever. Well done.
Wow that’s pretty awesome! Looks like a huge amount of hours put in but the result is spectacular. I have lathe envy ✌️😁✌️
Excellent restoration! It's great to see older machines like this put back to use, rather than rusting away.
By restoring these beautiful old machines, you make the world a better place! These machines just have so much character, and LIFE, left in them. You have restored their soul..
You have excellent taste in machines! The width of the bed and ways is impressive. Nicely done. One thing to check is you should see some oil movement in your front gearbox sight glass. Make sure its not blocked.
All the best,
Tom
oxtoolco thank you uncle Tom. I already remove all the old oil. Gave the housing really good clean and fill up new oil. Also cleaned up the ways, holes for oil goin through the main bearings.
I found a 1921 Hendey gearhead for 700 bucks in Clifton Park NY and I restored it. It looked like it was never used ! The guy that owned it says its been sitting in his Motor machine shop for 45 years and not even hooked up :)
Не хуева
Awesome CaLem! Green on green. I like your style 👍
Thank you buddy
Stop watching other peoples restorations and get on with your own ;) ... (waiting to see the land rover finished :P)
Wow, man I'm also speechless with you're work and effort. The machine is perfect now. Great job.
good job bringing that old thing back to life, looked good in the end too, and worked fine it seemed. gratz on your very own lathe:)
Работа заслужившая уважение!
Хозяин не только своих рук,но и времени и воли👏👏👏👏👏
смысл в этом какой? Только покрасил износ как был так и остался. Перекуп наверное.
Soooo much respect for the massive task you took on by yourself.
Each of your videos that I have watched have been excellent, both in in the quality of the production and the incredible workmanship of the project itself. It is always a pleasure to watch them.
I discovered your site 3 days ago and I'm almost through all your videos! You're work is an inspiration. Time to restore my surface grinder!
I like your humor. Subscribed!
Engineer BrunS Thank you mr Bruns. Love your videos. Been following for years.
Ничеси, земляк!)
Impressive restoration, the finaly result is realy Nice.
Hey man what a hard worker, no corners cut, hats off to you, a young lad that will go places, a perfectionist for sure.
The Japanese sure know how to make machine tools, that lathe is a lot like an Okuma tool room lathe we have just sold. Beautiful restore, I would love to own it! Hope it gives you years of pleasurable service, I am sure it shall. Many thanks for the video!
Восторг неописуемый,от работы и станка.Красавчик.
2:11 Lmao. You made it look like a rat looking for leftovers. Love what you did with the lathe. I did it before and it was very rewarding. Thanks.
Great job Ca Lem looks like a fast race car, neon lights too make it float. The fast and the furious lathe part one lol. Nice job🤙🤙🤙❤️
Your editing is on that "HAGERTY" Level.
Amazing job all around!! Ty for sharing.
lathe restorer level: Asian
bruh, don't worry about the color, it fits on the machine. Nicely done kudos!!
question : how much did you pay for the lathe and how much did you spend on the repairs?
hedning003 i have picked up similar lathes for $200. Seen some sell much higher. Bearing, paint and bushings in a restore can add up to about $500. Really not bad for a nice lathe. Hardest part is moving them.
A wonderful lathe and not as beaten up as some of the ones you find in the UK.
I was pleased to see no dents on the bed and a chuck that has not been abused.
Nice job.
Thank you from a fine limit engineer.
Keep up the good work Cà Lem, and I enjoyed your style of restoration videos. You give us enough details without dragging us over the boring parts. I Like that a lot!
I want to see the milling machine :)
What a job you did with the lathe ..... good Calem continues like this!
Молодец, удачи и успехов в новых проектах!
Чётко сделанная работа👏👏
Congratulations on a very well done job. Lovely to see such a well made old machine restored to her former glory.
What a nice piece of equipment! Your work is first class and the controls look like they work as well as any top quality lathe should. I've used a number of lathes from very old to brand new and none of the controls worked as nicely as yours. I would be proud to own that lathe.
Great work! Those timelapses make it look easy which is not.
It seems that you don't mind spinning you chuck without tightening it up, everybody suggests otherwise. But I haven't ever seen untightened jaws fly away from a machine. Who knows.
But don't wanna witness it either though..
yeah. thank you!
God and nature would struggle to create something more beautiful. Love the colour. You should be very proud!
What an awesome video! Glad to see you back with this beautiful project
WOW!!!! Tons of work and effort went into that and it sure paid off. GREAT JOB!!!!
You' ve got my full respect for that project!
I hope i've found the right words... My english is not the best ;)
Perfect English
Try changing the chuck jaws into the other slots and recheck runout, you may get it better!
never seen a lathe before have you?
@@janvanruth3485 Well, I have an Atlas 12x36 and a 7x18 minilathe, so I know how to squeeze the most out of a bad 3 jaw chuck. There is a whole science behind that, which most people do not understand, and go straight to regrinding the jaws....before finding out the real cause of runout.
@Chris You are right they have to be in the right order, but you have 3 choices of which slot to start with. Quality chucks will be labeled as to which slot goes with which jaw for best results. If he is getting 5 thou TIR, I think it is worth trying the other 2 positions. It might get it within 3 thou.
rfnoise bullshit
Nr. One jaw goes in slot Nr. One.
No alternative.
The keyhole might be marked but that is it.
Not how its works buddy. Sometimes jaws are even diferent dimensions to prevent that. I have 3 jaw and 4 jaw emco scroll chucks. Also worked on large (11kw) lathes with 250-300 mm chucks none can switch jaws between slots they have to go in order they are marked
Excellent job, I've got 7 pieces of old machinery from 1898 to 1946 to restore, great video.
Congrats man, you did a great job and so you fully deserve the results. Quite noticeable the high quality of the machine when testing it at the end. Amazing!
Завидую молча, Чувак делает реальные вещи
Реально круто
Зачем?
вы так и не показали одну из важнейших операций по капитальному ремонту токарного станка - восстановление прямолинейности и параллельности плоских направляющих станка (шлифовка станины,) а от этого зависит точность работы станка. в домашних условиях такой ремонт невозможен, для этого нужны очень большие станка и высококлассные специалисты ruclips.net/video/O-sOWWDqxDI/видео.html
он просто перебрал всё, помыл, почистил, смазал, покрасил и запустил. я уверен что там не выставлена не задняя бабка, не суппорт, не передня(даже на видео видно что биение 1.5 сотки, автор говорит что это норма, но я сомневаюсь что это норма)....
Самоходная Техника смазал ??? Лично я не видел что он что то смазывал)
@@mr_ocean_ делать себе поделки пойдет. Там же написано - Станок из Васино. ))
You always do such good work. Your machines not only work better than when they were new, they look better!
You are such a good example of a machinist and a person!
You always inspire us!
:)
Beyond impressive. The level of detail you have to maintain to completely rebuild a lathe is something few people have.
thank you
Здравствуйте, работа проделана огромная, молодец !!!👍👍👍
Умелец на зависть👍
I can take it apart, but I couldn't put it back together.
Your work looks perfect. Brilliant project. You will be my instructor when I get space for one old lathe which is in my family :)
Wow, what a revival! Love this video!
You do not have a mischievous younger brother who would hide critical parts from do you???
Did you find much wear? The ways looked great, best I could tell from the small photos.
1:15 its not called a lathe bed for nothing
Like old cars, these machines can last forever and a day, with a restoration once ever 50 - 60 years or so. great job mate.
There's something so satisfying by seeing such a beautiful old piece of machinery restored
Отличная робота мастер класса 👍👍👍👍👍👍
Человек знающий свое дело.Супер
Bom dia Like
Wow brother, you are extremely talented. You do amazing work with crazy attention to detail. I'm blown away by every video you put out.
Impressive results, and I like the two tone green.
Отличная работа парень!
С Уважением из России.
Присоединяюсь!!!
In my country everything is made in China
the quality is equal to the prices...
@@nguyenvuhoanglong3418 Yes but frequent dealers
The two tone green looks fabulous! Beautiful restoration job!
Wow. That is totally awesome! Nice lathe! You should be proud of your restoration; the lathe is lucky to have you!
Разобрать весь станок .чтобы только покрасить?
Не каждый способен!
Это слишком точная машина...чтобы ждать пока поломка вылезет на изготавливаемом.
Зато внутренности все обслужены теперь
в станке кроме краски ничего не менялось, не порите горячку. у на. умеют не разбирая красить кста!!
Great job to you,you really deserve my appreciation..I am also a mechanical engineer also in the same profession as you.But some times i find it challenging to reasemble the parts again.But watching people like you everytime will make me a good mechanical engineer repairer?
Beautiful job! I imagine there was a LOT more involved in that restoration than this video showed. I've watched other channels where they did it step by step and it's insane how complex just the apron is. You could probably get that chuck dialed in a bit closer if you needed, otherwise that's a great lathe in a manageable size.
Congrats on the rebuild, and bringing back a part of something special! Big Thumbs Up!
Well Done. Somehow you managed to disassemble, clean, repair, repaint and reassemble a large lathe and make it work again. That was quite a major project and you got it done right, so can rightly feel proud of you achievement. You also now have an in depth knowledge of how your lathe works and have invested plenty of sweat equity in its restoration so you will be very careful with it's use. Good luck now put it to good use and turn some chips.
thank you Mark
Bravo young man, you always impress me with the standard of your work.👍🏼
I’m sure you’ll go on to make many great things. Good luck.
Wow, man!!! I tip my hat for you... Everything in this video is great... The work shown, the timelapse, the music.
Awesome work Man! I watched one of your old videos of disassembly and repair on a vintage lathe; you showed much natural skills even way back then. Any one would be lucky to have you work on their machines or in their shop.
Keep on kickin butt man! The shop has grown nicely and your machinery looks cool as @#%$.
Really like the restore work videos.
This was so incredibly impressive. It was a big undertaking and the result was spectacular. Great job, man!
I restored a cold saw once.... it was a endless job.... but... MAN!!! You are a monster!!! NFW!!!
Liking the two shades of green. Didn't expect it to look so good. Great Job!
I absolutely did enjoy it. Outstanding job!
very impressive restoration, instructive and also gives good cheer by refurbishing an old lathe myself.
good luck with this machine from the Netherlands.
To me this is where it’s at !!!!! With enough time and hard work anyone could do this (well just about)
But what a bloody good job he did here ,
And with all the new Tec coming out
Like say . . . 3 D printers these types of old machines won’t be out of price for the hobbyists 👍🏼🏴
Outstanding
You are a very talented young man and as well you have high standards for being a hard worker. All of this combined will make you successful in your life. Excellent rebuild.
Chipping out Concrete for what seems like 3 yrs (LOL) now that is commitment. Outstanding work
I remember using a lathe like that in metalwork class when I was a kid, loved using it.
Always enjoy your vids. Thanks for sharing!
Glad you did a good job unlike alot of these restoration channels you actually addressed the mechanical parts of the machine instead of just cleaning and painting it