This worked quite well. Awesome tutorial, easy to follow. I was unsure whether this would work for my particular installation. I was running KlipperScreen v0.2.1-5 and klipper v0.10.0-455. I decided to bite the bullet and it worked wonders. A few (unpredictable and easy to solve) issues I encountered: Getting motherboard firmware; I got an error message saying access denied. Choosing a different folder on my PC resolved the issue Installing motherboard firmware; wasn't working. Using another micro SD card resolved the issue (a partitioned 32gb micro sd didn't work, a properly formatted 8gb sd did the trick) Optional: Webcam Support; edit crowsnest.conf didn't show up. Plugging in the webcam to the speeder pad resolved the issue
Thank you for this video helped out a ton! I got 2 error's during Klipper install (Cloning Klipper from ....... failed -- Creation of Klipper virtualenv failed!) (Read more for solutions) Error: Cloning Klipper from ....... failed Solution: Just try reinstalling, maybee after reboot Error: Creation of Klipper virtualenv failed! Solution: Running the following commands, in CLI (not kiauh) (Do not know if it is right but it worked for us) 1. export SETUPTOOLS_USE_DISTUTILS=stdlib 2. virtualenv --download -p python3 ~/klippy-env/ 3. pip uninstall setuptools 4. sudo pip install setuptools==59.6.0 5. virtualenv --download -p python3 ~/klippy-env/
Have tried this numerous times but keep having to go back to stock V400 klipper. After running "sudo apt-get install network-manager -y", I can't connect to the wifi and all I get is a repeat of "trying to associate with (router and SSID)" then "ctrl-event-regdom-change init=core type=world" then "ctrl-event-regdom-change init=core type=country apla2=AU" (Australia), tries to associate again and just keeps repeating itself. Go back to stock and no problems. I done everything step by step in video and github guide, anything I can do to fix this or am I stuck with stock Flsun klipper?
how are you doing the z-offset? from mainsail or klipperscreen from mainsail, you need to run the save macro after each calibration from klipperscreen it should save after pressing accept
This worked quite well. Awesome tutorial, easy to follow.
I was unsure whether this would work for my particular installation. I was running KlipperScreen v0.2.1-5 and klipper v0.10.0-455.
I decided to bite the bullet and it worked wonders.
A few (unpredictable and easy to solve) issues I encountered:
Getting motherboard firmware; I got an error message saying access denied. Choosing a different folder on my PC resolved the issue
Installing motherboard firmware; wasn't working. Using another micro SD card resolved the issue (a partitioned 32gb micro sd didn't work, a properly formatted 8gb sd did the trick)
Optional: Webcam Support; edit crowsnest.conf didn't show up. Plugging in the webcam to the speeder pad resolved the issue
That's great I do this video in Portuguese
Cool my v400 is being delivered today.
Thank you for this video helped out a ton!
I got 2 error's during Klipper install (Cloning Klipper from ....... failed -- Creation of Klipper virtualenv failed!) (Read more for solutions)
Error:
Cloning Klipper from ....... failed
Solution:
Just try reinstalling, maybee after reboot
Error:
Creation of Klipper virtualenv failed!
Solution:
Running the following commands, in CLI (not kiauh) (Do not know if it is right but it worked for us)
1. export SETUPTOOLS_USE_DISTUTILS=stdlib
2. virtualenv --download -p python3 ~/klippy-env/
3. pip uninstall setuptools
4. sudo pip install setuptools==59.6.0
5. virtualenv --download -p python3 ~/klippy-env/
Have tried this numerous times but keep having to go back to stock V400 klipper. After running "sudo apt-get install network-manager -y", I can't connect to the wifi and all I get is a repeat of "trying to associate with (router and SSID)" then "ctrl-event-regdom-change init=core type=world" then "ctrl-event-regdom-change init=core type=country apla2=AU" (Australia), tries to associate again and just keeps repeating itself. Go back to stock and no problems. I done everything step by step in video and github guide, anything I can do to fix this or am I stuck with stock Flsun klipper?
Yeah same problem here, the guide is broken atm.
For me Copilot / ChatGPT was very helpfull to resolving my issues, hope it can help you guys!
My z offset don't save. Do you know what is the problem?
how are you doing the z-offset? from mainsail or klipperscreen
from mainsail, you need to run the save macro after each calibration
from klipperscreen it should save after pressing accept
Pressing the save button next to Z-Offset in mailsail crashes the printer.. The "Save" Macro works though
@@langeleipe not sure why it crashes, but instead of the save ui button, but can also call the save macro on the speeder pad
我的機器是SR也有遇到類似的問題，後來解決方法是，先Z_OFFSET_CALIBRATION和DELTA_CALIBRATION最後BED_LEVELING，假如最後才Z_OFFSET_CALIBRATION，會有不能保存Z偏移量的問題。