Thank you for a lovely video, the finished ocarina is really nice. My Grandson has asked me to make him one. I would think the size of the hole which you blow through is important (infilled with hardwood,) What size gap in the hole do you recommend for the best sound?
hello? Thank you for the compliment. Ocarina's hole spacing doesn't matter much. Instead, the size of the hole is very important. After drilling a small hole (about 3mm in diameter) at a location where the grandson is comfortable holding it with his finger, you need to tune it by gradually increasing the size of the hole. This is because the pitch is low when the hole is small, and the pitch increases when the hole is gradually increased. I hope you make a great ocarina!
Hello? Thank you for watching my video. The wind road has to be at a good. When the amount of wind blowing through the mouth is 100%, 50% should go inside the ocarina and 50% should go outside. That's why it's hard to make an ocarina out of wood. So it is advantageous to make the body and mouth of the ocarina separately. The hole in the body of the ocarina then marks the position of the fingers that are most comfortable to hold in the playing position and then pierces them as small as 3mm. You can adjust it by adjusting the pitch and increasing the size of the hole in a very fine hole. The bigger the hole in the ocarina, the higher the pitch. If it's too high, fill in the hole and start over. I'll let you know how to do this through the video on the link below. I wish you success! ruclips.net/video/BNLbNkdeT2U/видео.html
모양도 투박하면서 소리도 편안하게 예쁩니다~ 멋지세요
관심있게 봐주셔서 감사합니다. 음정이 맞지 않아 조율하는 영상도 아래 링크에 있습니다. ruclips.net/video/BNLbNkdeT2U/видео.htmlsi=M-xCFgSLQWlmWVP3
Wow❣️ It's a very delicate work 😊 Amazing!! ︎
Thank you so much for liking it.
There is also a video of Ocarina tuning the pitch, so please watch it. ruclips.net/video/BNLbNkdeT2U/видео.htmlsi=6ihtVEBm3XAxlsqn
That got lovely tone, be proud of that build
Thank you very much!
이런 영상 너무 좋아합니다. 자주 볼수 있었으면 좋겠네요. ^ ^
감사합니다!
대단하세요 👏👏 오키리나가 참 예뻐요
예쁘게 봐주셔서 감사합니다. 새해 복 많이 받으세요~^^
매우 감사합니다! 🙂
This was excellent! 😊
Thank you very much for the compliment.
Gran iniciativa y no decaer, congratulaciones, gracias por compartir, con esa actitud cada vez saldra mejor.
Gracias por sus amables palabras y elogios.
An inspiring video. Thank you for sharing
Thank you for thinking so.
Beautifully done sir. 🙏
Thank you kindly
That is a beautiful ocarina, and I know I'm a bit late. I plan on making one out of a branch from our tree.
Thank you. I wish you success in making wooden ocarina. It is important to use dry wood.
It was a dead but not rotten branch, and thank you.
So cool! Thank you for sharing.
Thank you for watching the video happily.
Felicitaciones, es muy buena, cada vez saldran mejores
Muchísimas gracias.
عمل جيد 👍 أحببته كثيرًا
شكرًا لك
Ficou ótima!
Muito obrigado.
Nice work😊 Thank you for subtitles :D
thank you very much!
I like the process, the neat editing, the presentation and the soothing voice. Here is a sub!
Thank you very much for thinking positively.
nice job
예쁘네요~^^
좋게 봐주셔서 감사합니다. 음정이 안 맞아서 튜닝하는 영상을 올렸으니 그것도 봐주시면 고맙겠습니다~^^
Very beautiful!
Thank you very much!
다른대서도.영상보니
아.ㅡ이건나무로
만더시군요.
배우고십으요
처음 만들어 본 것이라 실수가 많습니다. 흙으로 만드는 방법을 배우시면 좀 더 쉬울 거라 생각합니다.
¿Y la traducción al castellano...? ¿Los latinos no existimos...?
Como sea..., saludos desde Argentina.
thank you very much.
Thank you for a lovely video, the finished ocarina is really nice. My Grandson has asked me to make him one. I would think the size of the hole which you blow through is important (infilled with hardwood,) What size gap in the hole do you recommend for the best sound?
hello? Thank you for the compliment. Ocarina's hole spacing doesn't matter much. Instead, the size of the hole is very important. After drilling a small hole (about 3mm in diameter) at a location where the grandson is comfortable holding it with his finger, you need to tune it by gradually increasing the size of the hole. This is because the pitch is low when the hole is small, and the pitch increases when the hole is gradually increased. I hope you make a great ocarina!
If you watch the video of re-tuning after failing to adjust the pitch, it will be helpful. ruclips.net/video/BNLbNkdeT2U/видео.html
Wonderful!
Thank you very much!
Amazing
Thank you very much!
I'm sorry but could you please better explain the wind way and sound hole process? My small brain doesn't comprehend this process 😢
Hello? Thank you for watching my video. The wind road has to be at a good. When the amount of wind blowing through the mouth is 100%, 50% should go inside the ocarina and 50% should go outside. That's why it's hard to make an ocarina out of wood. So it is advantageous to make the body and mouth of the ocarina separately.
The hole in the body of the ocarina then marks the position of the fingers that are most comfortable to hold in the playing position and then pierces them as small as 3mm. You can adjust it by adjusting the pitch and increasing the size of the hole in a very fine hole.
The bigger the hole in the ocarina, the higher the pitch. If it's too high, fill in the hole and start over. I'll let you know how to do this through the video on the link below. I wish you success!
ruclips.net/video/BNLbNkdeT2U/видео.html
Love the video. One of the better wood ones on here imho. What key is this? And do you have an email?
Thank you very much! And I don't know the key exactly. Maybe C. My email is... archicwy@naver.com
만더시는.분은.누구신가요?
전.관심이많은.여잔대요.
흑으로빗은.오카리나배우는중
나무로.만던것가저보고싶어요
그러시군요. 기회가 되면 나무로도 만들어 보세요. 쉽지 않지만 나름 재미도 있어요.
처음 만드시는분이 이렇게 만든다는게 보면서도 믿기지가 않네요~
대단하시네요 👍👍👍
좋게 봐주셔서 고맙습니다.나무로 만든 오카리나를 하나 가지고 싶어서 만들었어요. 음정이 안 맞는 것은 다음 영상에서 튜닝했으니 그것도 봐주시면 고맙겠습니다~^^
ruclips.net/video/BNLbNkdeT2U/видео.html
Is beautifull
You have for 12 hole
Where found the sizes for make one?
I don't know the exact way. After drilling the hole small, I made a sound and adjusted it little by little.
ruclips.net/video/BNLbNkdeT2U/видео.html
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
thank you
Fiz duas de porungo. Mas não consegui afinar.
O som da ocarina depende do tamanho do buraco. Quanto maior for o buraco, maior será o nível de ponta, e menor será o nível de ponta.
ruclips.net/video/BNLbNkdeT2U/видео.html
짝짝짝 훌륭합니다요
브라보~~~
고맙습니다~^^
where did you get you get your gouge chisel?
I bought it at a hardware store.
오
Ничего не понятно, но очень интересно
Спасибо. Очевидно, что я сделал окарину из дерева.