Can you do a video on how to connect 2 active subwoofer and two passive speakers and settings id you can. Appreciate. I’m planning to have set up in the similar thing thanks .
Not to worry! Passive (non powered) speakers plug into the rear of the unit. There's also a monitor plug in n the front of the unit for active (powered) speakers. Hope this helps and sorry for the delay in getting back to you!
I have the pmp1680s and the manual on mine says 300 watts at 8 ohm rms per channel. the back is also miss-leading on the pmp1680s. It also puts out 600 watts per channel into 4 ohm speakers. even though it's listed at 1600 watts it's hard to get 1600 watts out of it. 400 watts peak per channel at 8 ohm and 800 watts per channel peak at 4 ohm. and bridge at 8 ohm 1200 watts rms and 1600 peak.
So they’re telling me this unit with 2-15 inch speakers and two monitors for $500…do you think that’s good? Also it’s for a church of about 250 church size is about 1500sg ft
I just recieved this Powered mixer on tuesday, along with beringher B215XL speakers today i turn it on to listen to some music and i find that the left channel has stopped working completly. not to happy with my purchase at this point. i was told that they will replace it but im looking at about 2 weeks before i get my new one back. and how long til it happens again?
i got 1 question where in amp to plug in jacks to conect to computer? i mean i know there in computer goes but duno where in ami to set that 2 jacks that black and red is that there where is writen cd/tape? or somewhere else
duuudes please help me!!! look, i just got one of these last december and today i tried to turn it on, but it started making weird noises and then the voltage wire (the one that plugs in the wall) started smoking like if it was burning... what do i do???????
Can anyone who has used this in a live setting respond regarding the fan noise? I plan to use a compact mixer like this in a solo acoustic setting, with a quiet listening audience. A fan would be distracting unless it's more or less whisper quiet. I can't find info in the Behringer manual which discusses the fan operation... for example, whether it's variable speed and only ramps up when the amp is under load (as with a full band gig), or if the fan runs at a fixed speed all the time. Thanks everyone in advance for an answer.
+stringsofglass Fan runs at a fixed speed and appears noisy when you turn it on but when playing solo I don't seem to notice it - I also use a foldback, I notice it when I take a break but as soon as I walk off stage I don't hear it, hope this helps - Leigh
The best and simplest explanation of power amp options. Thanks, I have always been unsure which mode is best - now I know.
Thank you for the video! Your instructions were great and easy to follow! I just got the 1680s version and I love it! Thanks again!
Fantastic tutorial overview. Good job.
Can you do a video on how to connect 2 active subwoofer and two passive speakers and settings id you can. Appreciate. I’m planning to have set up in the similar thing thanks .
I appreciate your thoughs on the matter, cheers!
@RAJKOify To connect to a computer you can plug into the red and white jacks (RCA) and yes they are called cd/tape in
Not to worry! Passive (non powered) speakers plug into the rear of the unit. There's also a monitor plug in n the front of the unit for active (powered) speakers. Hope this helps and sorry for the delay in getting back to you!
I have the pmp1680s and the manual on mine says 300 watts at 8 ohm rms per channel. the back is also miss-leading on the pmp1680s. It also puts out 600 watts per channel into 4 ohm speakers. even though it's listed at 1600 watts it's hard to get 1600 watts out of it. 400 watts peak per channel at 8 ohm and 800 watts per channel peak at 4 ohm. and bridge at 8 ohm 1200 watts rms and 1600 peak.
So they’re telling me this unit with 2-15 inch speakers and two monitors for $500…do you think that’s good? Also it’s for a church of about 250 church size is about 1500sg ft
Does it mean that I cannot insert my Headphones into the monitor output and get sound?
Ditto
I'm trying to set up 2 "Passive" subs along with 2 Speakers. How do I run those in line, one on the right/ one on the left?
what the best way to set your setting for live preformance for melodic metal band
I just recieved this Powered mixer on tuesday, along with beringher B215XL speakers today i turn it on to listen to some music and i find that the left channel has stopped working completly. not to happy with my purchase at this point. i was told that they will replace it but im looking at about 2 weeks before i get my new one back. and how long til it happens again?
Thank you so much
The Best
Do you know anything about the 960
I have to speakers how do I set them up what setting I can not get equal power each side
i got 1 question where in amp to plug in jacks to conect to computer? i mean i know there in computer goes but duno where in ami to set that 2 jacks that black and red is that there where is writen cd/tape? or somewhere else
good vid wery useful informations
i wana but that behringer amp but i will buy a stronger one and i need that info about chanels and that options ty
ever notice the speakers lighting up when really pushing it?
How would I hook up a powered subwoofer to this?
duuudes please help me!!! look, i just got one of these last december and today i tried to turn it on, but it started making weird noises and then the voltage wire (the one that plugs in the wall) started smoking like if it was burning... what do i do???????
ajudou um pouco. seria bom se para cada parte que você explica fizesse um zoom nela.
Can anyone who has used this in a live setting respond regarding the fan noise? I plan to use a compact mixer like this in a solo acoustic setting, with a quiet listening audience. A fan would be distracting unless it's more or less whisper quiet. I can't find info in the Behringer manual which discusses the fan operation... for example, whether it's variable speed and only ramps up when the amp is under load (as with a full band gig), or if the fan runs at a fixed speed all the time. Thanks everyone in advance for an answer.
+stringsofglass Fan runs at a fixed speed and appears noisy when you turn it on but when playing solo I don't seem to notice it - I also use a foldback, I notice it when I take a break but as soon as I walk off stage I don't hear it, hope this helps - Leigh
hope u make some more videos
would i be able to use this Powered amp with 2 Cerwin-Vega XLS-215?
Yes
And you do this, and you do that, but the result will always be, like crap - since its Behringer.