Tell them the truth, they should buy DC voltage supply and a rosin paste. This one you're doing is stressful. You too need to have it. Soldering paste is not precise but you are doing a great job so keep it up
Fada Joe, this seems confusing. In one of your videos, you said engineers should put the positive probe of their multimeter to the ground (on the SIM card cover) and the negative of the probe to the positive terminal of the battery connector of the phone to know if there is a charging connection. But in this video, reverse is the case. Could you please explain that for us. Thanks for the good job..
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@eightelms In the first video, he used the multimeter to conduct a continuity test from the panel ground (SIM card case) to battery positive and later, the battery negative. On this video, he's sending 5v to the panel, hence, positive wire goes to Vbatt and negative goes to GND.
1 What Rate will my multimeter show me if a capacitor is consuming power 2. If assuming i tested the battery terminal and it shows its been blocked what should i do immediately then.
Boss good please thanks for the update always please having issues with one of my clients please X655 consuming battery and generating heat please how can I identify the damage ic
Tell them the truth, they should buy DC voltage supply and a rosin paste. This one you're doing is stressful. You too need to have it. Soldering paste is not precise but you are doing a great job so keep it up
Thnx alot sir. But how can we apply that knowledge on smartphones ???
Fada Joe, this seems confusing. In one of your videos, you said engineers should put the positive probe of their multimeter to the ground (on the SIM card cover) and the negative of the probe to the positive terminal of the battery connector of the phone to know if there is a charging connection. But in this video, reverse is the case. Could you please explain that for us. Thanks for the good job..
Video coming soon
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@eightelms
In the first video, he used the multimeter to conduct a continuity test from the panel ground (SIM card case) to battery positive and later, the battery negative.
On this video, he's sending 5v to the panel, hence, positive wire goes to Vbatt and negative goes to GND.
Can the roop work the same as pest
Pls I want to know if there is any machine that can be used to dictate fault aside from multiple meter? what's the name Pls.
1 What Rate will my multimeter show me if a capacitor is consuming power
2. If assuming i tested the battery terminal and it shows its been blocked what should i do immediately then.
For this keyboard phones, we have understood. But what about if it's an android phone like Samsung : a13, a12, or a series ....
Sir Boss I want to ask you a question
what could be the fault of B1G charging but not onning
Father i recommend rosin atomizer instead of soldering flux anyway thanks for great video
Father Joe pls how could someone flash android phone firmware and will any security plugin remove if the firmware is flash??
It’s simple
Video coming soon
@@FatherJoePhoneRepairs ok I will keep reminding you to upload the video may God bless you for the knowledge you are passing
Since u have remove the capacitor, does it have a side effect on the phone.
Do you need to replace the capacitor to another one and is it only when you connect the cord and the battery that it's going to show white
Father Joe is it normal to apply 5 volts when to battery is connected and can't affect the battery 🔋🔋🔋 life
I think it would work better if that capacitor is replaced back
Yes I replaced it
Is this method possible if you us usb cable only or we have to put battery in phone
So the phone can still function very well without the capacitor you removed cause you didn't replace the capacitor
Can it be observed manually by with your body and secondly can be with battery alone without connecting to vbat and gnd
I recommend you connect to vbat
Is Battey connected on the phone along with the cable you connect ?
Yes
What if the capacitor is working and the phone still consuming battery ?
is it possible to change another capacitor or no need
replace it
So you will not replace another capacitor back
Father Joe will it not burn punnel because of increased current?
It will not but be careful
I have a question, itel 5606 power on is damage how can solved this problem?
Video coming soon
Hi, will it not affect the board since the board is make with 3.7v battery
It will not but be careful
Where can we get that screen??
Thank you so much
❤️❤️❤️
Hello bro, can you help me with my alcatel tab pixi 7 chargin port damage, please can you help me to jumper this connector charge??
Thank you, very good
❤️❤️❤️
How can I get it done on smart phones
Boss good please thanks for the update always please having issues with one of my clients please X655 consuming battery and generating heat please how can I identify the damage ic
Video coming soon
The negative of the charger was not conected to it to complete the circuit. Thsts whay i took
The capacitor u removed why not replace it with another one and secondly one of the Base removed during the process of you removing it
Good job Sir
Understood very well thx
Hi boss father joe please show us how to test very well all components on the panel
I will on my next video
@@FatherJoePhoneRepairswe really need it
Excellent
Thank you so much
Please sir if I want to use power supply how will I do it?
Use 4.7 voltage
Nice job
Thank you so much ❤️
But what about charging error?
Good bless you sir
Amen 🙏
Very nice
Do you replace the capacitor or not
I replaced it
@FatherJoePhoneRepairs that's have polarity
That's have polarity
I need the password for frp
What of T528
What about phone that is getting hot
Video coming soon
But the components on Android phone are much so how can one know it
It’s simple to know
You did not explain how to know when is on Android phone. You just said is simple. So explain it.@FatherJoePhoneRepairs
Thanks alot father joe....... What about android. Very important in android phone.
Is still the same process
Thanks Father joe
❤️❤️❤️❤️
Did you apply heat in order to remove the capacitor
No my engineer
Thank you boss
❤️❤️❤️
Father Joe I need your contact
Check description
Pls I need your contact for more clarity
Ok I will drop soon
I need u contact
What about Itel 2160 that overheats and drains batterry
We need a whatsup number
It will soon be available