HF ANTENNAS AND PROPAGATION - SIMPLE TESTS YOU CAN MAKE

Поделиться
HTML-код
  • Опубликовано: 12 дек 2021
  • Peter G3OJV, describes some simple tests you can make to check out antenna performance and propagation, from the comfort of your armchair!
    49:1 UnUn
    hamradiostore.co.uk/ldg-ru-49...
  • НаукаНаука

Комментарии • 94

  • @180mph9
    @180mph9 2 года назад

    Never a dull moment on your channel, thank you for the great information.

  • @hubercats
    @hubercats 2 года назад +1

    Very interesting technique, and so easy to use. I’m in the process of setting up and end-fed antenna (40 meter primary band, 49:1 unun) in my yard in Seattle, WA and thanks to you I now know a very good way to test its performance. Thanks very much, Peter. 73 (KK7CSC)

    • @watersstanton
      @watersstanton  2 года назад

      Glad it was helpful! Hope all goes well. 73 Peter

  • @rowhope
    @rowhope 2 года назад

    Thank you so much! Great information. Simple and direct, as usual. I am grateful for your clear teaching style. Blessings.

  • @Kensownvids
    @Kensownvids 2 года назад

    Great video. Can’t wait to try this out on my antennas.

  • @davem0udb
    @davem0udb 2 года назад

    Another great video Peter, following on from your video on verticals in small gardens, i’m going to experiment. Merry Christmas M0UDB

    • @watersstanton
      @watersstanton  2 года назад

      Happy holidays!Thanks Dave. Happy Christmas to you also. 73 Peter

  • @jeffpriddin9711
    @jeffpriddin9711 2 года назад

    Thank you once again a great video from you I realy enjoyed it.

  • @tombaffa9374
    @tombaffa9374 2 года назад

    Great advice Peter! I’ve done this and it’s very interesting

  • @DrHWO
    @DrHWO 2 года назад +3

    A very practical video, Peter and crystal clear as usual. I find that on my Icom 9700, even dialling my output power down to zero, give an output of around 15mW, which on couple of occasions has been enough to generate a reply, so for me hitting the Fbkin button was needed! 73, M0YZT

  • @frankmooney7282
    @frankmooney7282 Год назад

    Nice video explaining reverse beacon network, but not all of us use these fancy radios with built in keyer and waterfalls. 56 SSB confirmed dx countries on LOTW with 40/15 and 17 ground mount verticals in 2 yrs of covid. thanks for your videos, I've learned alot. 73 de KI7MJU

  • @DannerPlace
    @DannerPlace 2 года назад

    I've recently discovered your RUclips channel, and I must say it is an excellent resource for HAMs like me. TU ES 73 DE W5SRT, TX USA.

    • @watersstanton
      @watersstanton  2 года назад

      Hi Dan, great to hear from you. Take care. 73 Peter.

  • @markg6jvy135
    @markg6jvy135 2 года назад

    Nicely explained Peter 👍👏👏

  • @d.jensen5153
    @d.jensen5153 Год назад

    Many thanks! Reverse Beacon Network is just the ticket! That and your advocacy for EFHW antennas are pulling me out of a deep stupor. 🗿

  • @K3KTB
    @K3KTB 2 года назад

    Great information. Thank you.

  • @davemaier7
    @davemaier7 2 года назад

    Thank you for all that you do. Best, Dave K7CI

  • @stevetelford2821
    @stevetelford2821 2 года назад

    Thanks for that Peter, I've been meaning to have a go at the reverse repeater system.
    Hope you have a good Christmas and New year.
    DE Steve G7HUJ

  • @budokai6706
    @budokai6706 2 года назад

    Thank you...this may help. I'm having some issues with my HF g5rv lite installation.

  • @SteveG4YTK
    @SteveG4YTK 2 года назад

    Hi Peter, I have been using it for a year now. Well worth trying a dead band very surprising the band could well be open. I always have it open when I switch the radio ON and open the logbook. Happy Christmas to all at WS

  • @Paddy_Roche
    @Paddy_Roche 2 года назад

    Can only concur with the comments below Peter. Great video and Tuition style.

    • @watersstanton
      @watersstanton  2 года назад

      Many thanks Paddy. Take care 73 Peter.

  • @justmejonboy
    @justmejonboy 2 года назад

    This is fascinating stuff, never realised any of this.

  • @dancingjim1
    @dancingjim1 2 года назад +1

    Thank you so much for the excellent video. Just what I was looking for. Your teaching and demonstration is so relaxing and still so professional. Feels like I am a guest in your studio!! Will rewatch and try tonight.

    • @watersstanton
      @watersstanton  2 года назад

      Glad it was helpful! Very nice words, Take care, 73 Peter

  • @chrisg7veo495
    @chrisg7veo495 2 года назад

    a good tip for checking and comparing antennas and look forward to use cw for a change

  • @scottbelcher9026
    @scottbelcher9026 2 года назад

    That’s very cool!

  • @johnk8091
    @johnk8091 2 года назад

    Hello Peter. Gosh, it looks like you have a problem with the LCD display on your 7300. There is a line at the top . I bought my 7300 from your shop with the first batch that you received...I think that was March 2015. I was so impressed with it, that I bought a second 7300 six months later. I have had no problems with either of them. That LDG 49:1 looks like a handy thing to have...and cheap as chips. I have 1 KW 49:1 transformers for my EFHW antennas at home. But I think I might get one or two of those LDG ones for portable ops. 73 5Z4J, ZS5J

  • @russjensen2282
    @russjensen2282 2 года назад

    Thank for the great videos!! Is there a way test the RBN ona radio that does not have CW memories? I have a Xeigu G90, new antenna and I don't know CW. Thank you.

    • @watersstanton
      @watersstanton  2 года назад

      Unfortunately you will need to send CW. It should nit be too difficult to simply learn the e characters of your call and follow this with “test” - that is all you need. 73 Peter.

  • @dubliner1100
    @dubliner1100 2 года назад

    Brilliant as usual. Thank you once again

  • @markramsay6399
    @markramsay6399 2 года назад

    Cheers Peter. Excellent video. Was not aware of this, so going to try out this weekend. I suppose this is in some ways similar to the WSPR network? But without the need for specific installed software. Thx, , Mark 2E0MSR.

  • @aeron-mw7ofs
    @aeron-mw7ofs 2 года назад

    Thanks Peter, most interesting. Happy holidays and keep safe 👍

  • @Roddy1965
    @Roddy1965 2 года назад

    I tried this when the greyline was at my QTH. The RBN showed the 40m going east and the 20m going west, within minutes of each test. Expected, but it was rather striking.

    • @watersstanton
      @watersstanton  2 года назад

      That's interesting. Thanks for comment. 73 Peter.

  • @AliReza-zx8km
    @AliReza-zx8km 2 года назад +1

    Nice.............................

  • @robcarnaroli269
    @robcarnaroli269 2 года назад

    I seem to have a problem. My back yard is big enough for a 20m antenna but I don't have enough room for a garden. Does the garden act as a counterpoise... :-) Great Videos Happy Holidays!

    • @watersstanton
      @watersstanton  2 года назад

      No, you should be OK. Many antennas are erected over concrete and indeed above flat-roofed buildings. 73 Peter.

  • @fieldofscreams
    @fieldofscreams Год назад

    Thank you. Just starting out and this was incredibly helpful. I like the general discussion with the specific CW walk around. Now I know what I need to research next.

  • @johnrees44..G4EIJ
    @johnrees44..G4EIJ 2 года назад +1

    Another great video, Peter…It’s worth mentioning that, on the reverse beacon website, you can bring up all your reverse beacon responses superimposed onto a World map that gives an excellent visual overview of your antenna performance.. 73..

  • @taekehf
    @taekehf 2 года назад

    Thanks for the video. RBN is a very useful tool.
    Also, please check your audio before uploading :-) Part of the video, the audio was on the right channel.

    • @watersstanton
      @watersstanton  2 года назад

      Sorry for that. It was a voice over setting error. Peter

  • @bongkuci1
    @bongkuci1 2 года назад

    thank you peter for all your videos ,seasons greetings to you your family and all the staff. james 2e0tdy essex

    • @watersstanton
      @watersstanton  2 года назад

      Thanks James. Happy Christmas. 73 Peter

  • @dieselbushcraft1299
    @dieselbushcraft1299 2 года назад

    An interesting idea Peter, do you happen to know if the IC705 has the CW memories? Thanks 73’s

  • @ataboyboyboy8895
    @ataboyboyboy8895 2 года назад +1

    I am sitting my exam in January, in the meantime can I test without a call sign to check my antenna?
    Regarding the end fed wire antenna, 20m, can I bend it once to fit my garden?

    • @RESISTAGE
      @RESISTAGE 2 года назад +1

      legally no.
      can u get caught? no.
      just don't interrupt.

    • @watersstanton
      @watersstanton  2 года назад +2

      YOU CANNOT TRANSMIT WITHOUT A LICENCE!

  • @vk2ycj
    @vk2ycj 2 года назад

    Hello Peter, is the callsign in the above intro text correct ? G3OJB or G3OJV ? Great video thanks, 73, Jamie VK2YCJ

  • @michaelcherry7117
    @michaelcherry7117 2 года назад

    I'm a new Ham and find your videos very helpful. I tried this but didn't get any reports when I went to reverse beacon website what am I missing? Thanks K2MWC 73

    • @watersstanton
      @watersstanton  2 года назад

      You need to send pretty good Morse cide but if generated by radio that should be mo problem. You must send in the CW section of the band ie ie near tge bottom. Reports take several minutes to come back.

  • @Capt_Duffy
    @Capt_Duffy 2 года назад

    Outstanding video once again Sir, just one question, around how much SNR is considered good. TNX

    • @watersstanton
      @watersstanton  2 года назад +1

      Noise level can be anything between zero and S9 plus. There is no bench mark.

  • @782matt2
    @782matt2 2 года назад

    👍👍

  • @jamesschmaus8597
    @jamesschmaus8597 2 года назад

    BK-IN won't work, just keys up VOX. Must I have a key plugged in?

    • @jamesschmaus8597
      @jamesschmaus8597 2 года назад

      I am in CW mode and have menu keyer on , preset message just wont transmit, only plays cw message

    • @watersstanton
      @watersstanton  2 года назад

      Have you selected CW mode?

  • @BennyCFD
    @BennyCFD 2 года назад

    You can also get how much your antenna is getting out is by looking at the PO meter while transmitting. If you're set at 100W and the meter says 100 you pretty much transmitting 100W. If the PO meters shows 50W you know you're loosing power somewhere. Non resonate antenna, line loss, bad SWR or a combination thereof.

    • @watersstanton
      @watersstanton  2 года назад

      The power output has no connection with propogation!

  • @paulhastings3109
    @paulhastings3109 2 года назад

    Peter great video but my 991a won't do that 🙃

    • @watersstanton
      @watersstanton  2 года назад +1

      Ah - in that case yiu need to be abke to manually send CW. Sorry. 73 Peter.

    • @paulsengupta971
      @paulsengupta971 2 года назад +1

      I'm not sure about that. I've got it programmed into my 991 (not A) and it works. It has five memories for morse strings which can be sent in the same way. Look in the manual under CW and then contest memory thingie. It's the second bit under "Text".

  • @shumbers
    @shumbers 2 года назад

    Typo in your callsign Peter....B is next to V!

  • @lifeundergas
    @lifeundergas 2 года назад

    J.H.A
    Z-25k 5w in parallel with
    10m antenna

  • @MrDbone75
    @MrDbone75 2 года назад

    Good Monday morning to you sir