Oh damn, I wish the preconditioner at my factory was that accessible! It opens up top with a small hatch but it's on top of the extruder so it's a pain in the ass to get too, you gotta vacuum it out the hose it out. So how do you clean the barrel if it's fixed? I see that you can remove the screws but do you have to do that every time to clean it? The extruders I work with have the barrels cam forward on a platform and leave the screws in place for cleaning. You spray the screws off and scrub the barrel with a barrel brush, what you cant get off with water you have to scrap off with a knife. And our knives are mounted onto the die face itself and dont move, makes blade changes a pain in the ass if you dont want to shut the screws off mid run. You can but you have to be quick or it will just seize up. Or else you have to fight product flow as you put the new blades on. I love the idea of the knife just sliding in and out of place, that would make blade changes so much easier!
Dear Peter (Pan), Thanks for your comment. The described situation with the cleaning procedure was exactly the reason, why we did the design as you have seen it in the video. The cleaning procedure is that you can bring the screw into a washing area (same floor) and wash it with high or low pressure cleaner. The barrels have to be cleaned in place with a brush. The cleaning interval has to be defined in your Hygienic concept. However, we would recommend cleaning the system when shutting down for Sunday (for instance). Hope that helps. Best regards Dani
Hola Eduardo, nosotros estamos buscando lo mismo, algun procedimiento o insumo que se pueda correr antes del corte de prduccion para que queden limpios los tornillos y la camara. le agradezco nos avise si encontro alguna solucion o proveedor. Saludos , Bárbara.
Ces splendide je pratique ce métier fabrication couscous traditionnel depuis 10ans a la mains avec diplôme et surtout a la main comme je l'adore j'ai même l'IDE de fabrication de machine opérations mains mais ça manque moyens financière et je le continuer a la mains meilleur Mercie a cette machine création
Dear user, Thank you for your interest in our company. Please fill in the following form (see link below), which will allow you to be connected to the appropriate sales expert directly. They will get back to you as soon as possible. Best regards, Bühler Social Media Team www.buhlergroup.com/socialcontact
An exciting product - Bühler is an innovator that always comes up with new ideas.
Can't wait one day to own this buhler machine
Oh damn, I wish the preconditioner at my factory was that accessible! It opens up top with a small hatch but it's on top of the extruder so it's a pain in the ass to get too, you gotta vacuum it out the hose it out.
So how do you clean the barrel if it's fixed? I see that you can remove the screws but do you have to do that every time to clean it?
The extruders I work with have the barrels cam forward on a platform and leave the screws in place for cleaning. You spray the screws off and scrub the barrel with a barrel brush, what you cant get off with water you have to scrap off with a knife. And our knives are mounted onto the die face itself and dont move, makes blade changes a pain in the ass if you dont want to shut the screws off mid run. You can but you have to be quick or it will just seize up. Or else you have to fight product flow as you put the new blades on. I love the idea of the knife just sliding in and out of place, that would make blade changes so much easier!
Dear Peter (Pan), Thanks for your comment. The described situation with the cleaning procedure was exactly the reason, why we did the design as you have seen it in the video.
The cleaning procedure is that you can bring the screw into a washing area (same floor) and wash it with high or low pressure cleaner. The barrels have to be cleaned in place with a brush.
The cleaning interval has to be defined in your Hygienic concept. However, we would recommend cleaning the system when shutting down for Sunday (for instance).
Hope that helps.
Best regards
Dani
hello everyone, I have a question, are there purge for clean twin screw and clean extruder´s parts?
I want, delete time out in set up
Hola Eduardo, nosotros estamos buscando lo mismo, algun procedimiento o insumo que se pueda correr antes del corte de prduccion para que queden limpios los tornillos y la camara. le agradezco nos avise si encontro alguna solucion o proveedor. Saludos , Bárbara.
Can you help me in cold feed rubber extrusion
Ces splendide je pratique ce métier fabrication couscous traditionnel depuis 10ans a la mains avec diplôme et surtout a la main comme je l'adore j'ai même l'IDE de fabrication de machine opérations mains mais ça manque moyens financière et je le continuer a la mains meilleur Mercie a cette machine création
excelents equips!!
Wenger has one that is more sanitary and used for multiple applications.
Giá thế nào vậy
I need some steps to make cereal for breakfast .please
Please tell me this machine full parts of name ...any body help me
Thank you for your interest. Please follow this link to learn more about it: www.buhlergroup.com/content/buhlergroup/global/en/products/extruder.html
thanks your
i am Interested your company job
Grate idea
please email address
price plz??
maherco29@gmail.com
Ray Xiao maherco29@gmail.com
Do you have the floating fish feed machine? ?
Need communication details of a technical person. Is there someone in India
Whatsapp/Wechat +8615269135310
Que compra extrusora bulher milho pre gel usada com 15 ano uso exelente maquina
Dear user,
Thank you for your interest in our company. Please fill in the following form (see link below), which will allow you to be connected to the appropriate sales expert directly. They will get back to you as soon as possible.
Best regards, Bühler Social Media Team
www.buhlergroup.com/socialcontact
waooooooooooooooo it,s new modren
OEE 82%.