PJ Chen - вы лучший! Совсем недавно начал смотреть ваши уроки и в полном восторге. И хоть я плохо понимаю по-английски, но по субтитрам и подсказкам все легко повторить. А самое главное, это ваш метод построения. Вы за 15-20 минут доходчиво объясняете то, что в других подобных видео и за час не сделают! Успехов вам!
I just spend hours and hours on the exact same ring trying to get it right for a customer last week only to see how easy it could have been . lol thanks for a great vid again 👍
Hello PJ! For some reason I don't have that middle line on the outside of the ring shank that you use to get the length and to flow onto. What have I done wrong? Thank you
I have been watching your videos and was curious about scaling a diamond to certain size...say I import your 5 mm diamond and want to quickly scale it 1.9 mm. In Matrix you have two options to change but I am lost in how to do it here???
I use Rhino only. If you are in Rhino or Matrix. You can 3D scale by turn on the vertex Osnap. Snap on the diameter of a diamond and type the size you want.
Thank you, this was very helpful! I just have an issue with using the flow command to transfer the stones and prongs onto the the ring. When I use it, the stones and prongs don't sit flat on the surface but instead are rotated. Any idea why that might happen?
I don't know what you did on your model. and how different is than mine. if you want to send me your 3dm file and explain what you did. I can take a look. pj@pjchendesign.com
The stones for invisible setting have a cut on the pavilion. It is not just the model part, it is also critical for how the stone is cut. Unfortunately, that is the only one that I don't cover in my stone setting course.
PJ Chen - вы лучший! Совсем недавно начал смотреть ваши уроки и в полном восторге. И хоть я плохо понимаю по-английски, но по субтитрам и подсказкам все легко повторить. А самое главное, это ваш метод построения. Вы за 15-20 минут доходчиво объясняете то, что в других подобных видео и за час не сделают! Успехов вам!
Thank you, and glad you like my videos. Welcome to my channel!
Thank you very much!!!
You're welcome!
So helpful for me! Thank you so much!
You are very welcome!
thankyou, your are the best. you make rhino easier. from colombia
You are welcome!
It looks complicated but beautiful; thank you PJ
Super! and you are welcome!
Amazing Pj . I have never seen a shank like that built so fast and easy thanks for sharing ur knowledge your the best !!
You are welcome, John. Love to share.
Hi Pj one question is the 2% prong over the stone is ok to cast consider shrinkage?
Thank you PJ!
You are welcome, Nicolle!
Thank you for this helpful tutorial
Glad it was helpful!
I just spend hours and hours on the exact same ring trying to get it right for a customer last week only to see how easy it could have been . lol thanks for a great vid again 👍
You are very welcome, John. Glad it helps!
Pj Chen Thank you for this helpful tutorial.
You are welcome, sakfful.
Thank you PJ😁😍
You are welcome!
Hello PJ! For some reason I don't have that middle line on the outside of the ring shank that you use to get the length and to flow onto. What have I done wrong? Thank you
You can use the Extract IsoCurve to extract a line.
Always cool PJ...
Thanks Alejandro!
I've been trying to do this exact same style but with 4 "eyes" and I just can't get it right... But this tutorial really helped me out!
Super!
Thank you great as always👌
You are very welcome, Joe.
I have been watching your videos and was curious about scaling a diamond to certain size...say I import your 5 mm diamond and want to quickly scale it 1.9 mm. In Matrix you have two options to change but I am lost in how to do it here???
I use Rhino only. If you are in Rhino or Matrix. You can 3D scale by turn on the vertex Osnap. Snap on the diameter of a diamond and type the size you want.
Wow
Thanks
You are welcome!
Beautiful ❤️ sir
Thank you, Sanu!
Recently upgraded to Rhino6 what are you doing for cutters on your stones? How do you flow them without distortion? thanks
when you flow along curve. there is an option "rigid". Make sure that is check., so it won't deform the object.
Thank you, this was very helpful! I just have an issue with using the flow command to transfer the stones and prongs onto the the ring. When I use it, the stones and prongs don't sit flat on the surface but instead are rotated. Any idea why that might happen?
at the option, please select "roadlike"
Hi thanks for the video, can u make a video on pressure setting for pear n marquise shape pls
I have a stone setting CAD course at pjs-school.thinkific.com/courses/StoneSettingModeling
You can check out the course content with a free account.
Can u explain if we use flow along curve command stone become stretch then how we will drill to shank?
Sometime you can flow with rigid option on, it will prevent the object to be deform.
Hi, many thanks for video but i try to work with function gems flow on curve but it isn't working smooth like your video. Please advice.
I don't know what you did on your model. and how different is than mine. if you want to send me your 3dm file and explain what you did. I can take a look. pj@pjchendesign.com
@@PJChenJewelryDesign I am a new learner i try to follow your function gems flow on curve in this model but the gems run difference your video. Thanks
sorry you are the best. im sorry for my english
Glad you like the video.
how to make any modification in split shank example increases step Hight ,metal width how to modification
I always keep the original curves. so I can redo the sweep to change size. if it only need to be wider a little. you can try 1D scale.
How you made it diamond?
You can check on this video ruclips.net/video/hOyFO5pScoc/видео.html
When I tried to trim I lost my curve
How to make a invisible stone settings pendant.
The stones for invisible setting have a cut on the pavilion. It is not just the model part, it is also critical for how the stone is cut. Unfortunately, that is the only one that I don't cover in my stone setting course.