I’m finding the best way to measure for the length was to measure up one arm, across the widest part of my shoulders across the back then down my other arm. The first one I made, I guessed and decided to add more length so when I wore it as sleeves it would be long sleeves. So I added more length to my next one and tried to keep it proportional to Melissa’s measurements. My first one was 66x33. The next one is 72x36. When I measured as previously mentioned, I got 70”. Which explains why my second one fits so much better. After gemming, it is that measurement. I don’t know if you need to keep the proportions the same, but that worked really well for me but I am super tall. So, I agree with Melissa -try it out but hopefully using your arm-shoulder-arm measurement will help you know where to start. The width of the rectangle only comes into play with the sleeve circumference and how far down you back you want it to hang. And you can make it smaller if you think it’s too wide or too long. Try starting with a proportional rectangle and pin it in the different configurations that you are wanting to wear. See if it works before going to the work of the buttons and holes. That’ll after they are in, it would be hard to alter but before they go in, you can redo the hems.
I just made this with plastic press studs! I can't machine sew to save myself but even with A LOT of mistakes and some rough measurements my wrap looks GREAT. For the record I made mine longer than my arms (I'm tall and plus sized), probably a touch too long, but it drapes nicely. I feel quite chic in it. Not all of the wearable options look great with me but it is still very versatile. This wrap will be perfect for a trip or as a pool cover or at an evening out. Will look at making again down the track.
I made another one. This time out of the gauze normally used for baby blankets. I am 6’1” tall and broad shouldered so this one I cut 72”x36”. Then I used a heat fusible tape to baste the hems in place and stitched the hems with a cover stitch machine. The fusible web also gave the edges a bit of body so the buttonholes went in perfectly! I did add an extra button and hole to the ends so I have 9 on each end and was able to spread the holes to 3 7/8” apart. I can wear it in all but one way shown here (I cannot figure out how to make it cross in front and over my shoulders). But I also found two other ways to wear it-one halter type top that I would not wear in public unless over another top and as a skirt swim cover. Thank you soooo much for sharing this! I love both of mine and I will probably be making more as they are so versatile! The gauze is a perfect sun cover!
I made this today! Your directions are great! My French terry seems a bit thicker than yours so it doesn’t drape quite as well but it’s wonderful as a poncho. I did use my cover stitch machine to hem the edges and a knit stay tape in the hem which made the buttonholes so easy! Also, for the sizing, I am 6’1” tall and broad shouldered so I cut my rectangle 66” x 36”. If I make it again, I will make it longer still as I cannot wear it completely buttoned up in some of the ways. I’m wondering how tall you are. That info will help me know how long I need to make it next time. Thanks so much for this tutorial!
For the hems, you can use heat fusible tape (think I have stitch-witchery) but not sure how non-seen buttonholes would work. You could use fray check and wait until it’s dry to cut the holes. You could then sew buttons on by hand and in fact you can sew the buttonholes by hand which I think you would want to do as I don’t know how long it would hold up without the stitching but you could try it.
I’m in Palm Springs and this travel wrap has been PERFECT! I’m wondering if you think gauze would work. I know you said a knit fabric was best but I’m wondering about making one out of that double gauze they make baby blankets out of. It would drape nicely and be perfect for the sun! What do you think? Would it have enough stretch?
It depends on your fabric; I didn't feel like it was necessary on this fabric, but on a thinner knit I might add pieces just behind the buttonholes (not the whole edge).
Melly I love, love LOVE this wrap! Thank you SO much for the great video for both wearing it and making it!
Love it .. Thank you so much
Thanks for watching!
going on a mission trip overseas this summer... just ordered my fabric to whip up a wrap for the plane and in the cold churches there! Thanks!
Hope it's useful for you!
Novel, easy, doable = Perfect! 😊
Thanks for watching!
What would be your suggestion for making this plus size? Is there a formula for let’s say largest circumference measurement, plus ?% of that number?
I'd experiment with some uncut fabric to see what you like; there isn't a particular formula.
I’m finding the best way to measure for the length was to measure up one arm, across the widest part of my shoulders across the back then down my other arm. The first one I made, I guessed and decided to add more length so when I wore it as sleeves it would be long sleeves. So I added more length to my next one and tried to keep it proportional to Melissa’s measurements. My first one was 66x33. The next one is 72x36. When I measured as previously mentioned, I got 70”. Which explains why my second one fits so much better. After gemming, it is that measurement. I don’t know if you need to keep the proportions the same, but that worked really well for me but I am super tall. So, I agree with Melissa -try it out but hopefully using your arm-shoulder-arm measurement will help you know where to start. The width of the rectangle only comes into play with the sleeve circumference and how far down you back you want it to hang. And you can make it smaller if you think it’s too wide or too long. Try starting with a proportional rectangle and pin it in the different configurations that you are wanting to wear. See if it works before going to the work of the buttons and holes. That’ll after they are in, it would be hard to alter but before they go in, you can redo the hems.
Adorable....but the mitered corners tip is just the best!
Glad to help!
fabulous
Thanks!
Can I use snaps instead of buttons and buttunholes
I can't say how that would turn out as I have not tried it.
I did the snaps and it worked
Clever!
Thanks!
I just made this with plastic press studs! I can't machine sew to save myself but even with A LOT of mistakes and some rough measurements my wrap looks GREAT. For the record I made mine longer than my arms (I'm tall and plus sized), probably a touch too long, but it drapes nicely. I feel quite chic in it. Not all of the wearable options look great with me but it is still very versatile. This wrap will be perfect for a trip or as a pool cover or at an evening out. Will look at making again down the track.
Glad you like yours!
I made another one. This time out of the gauze normally used for baby blankets. I am 6’1” tall and broad shouldered so this one I cut 72”x36”. Then I used a heat fusible tape to baste the hems in place and stitched the hems with a cover stitch machine. The fusible web also gave the edges a bit of body so the buttonholes went in perfectly! I did add an extra button and hole to the ends so I have 9 on each end and was able to spread the holes to 3 7/8” apart. I can wear it in all but one way shown here (I cannot figure out how to make it cross in front and over my shoulders). But I also found two other ways to wear it-one halter type top that I would not wear in public unless over another top and as a skirt swim cover. Thank you soooo much for sharing this! I love both of mine and I will probably be making more as they are so versatile! The gauze is a perfect sun cover!
Glad you've made it work for your needs!
I made this today! Your directions are great! My French terry seems a bit thicker than yours so it doesn’t drape quite as well but it’s wonderful as a poncho. I did use my cover stitch machine to hem the edges and a knit stay tape in the hem which made the buttonholes so easy! Also, for the sizing, I am 6’1” tall and broad shouldered so I cut my rectangle 66” x 36”. If I make it again, I will make it longer still as I cannot wear it completely buttoned up in some of the ways. I’m wondering how tall you are. That info will help me know how long I need to make it next time. Thanks so much for this tutorial!
I'm 5'3" - thanks for sharing your modifications!
I like your description ,its so easy to follow.Thanks for the tutorial.
Thanks for watching!
Love this. Do you have a no sew way of showing us? These are very very pricey to buy and I don't have a sewing machine.
Tfs 💕
You could hand stitch, but I don't have a no sew method on my sewing channel.
For the hems, you can use heat fusible tape (think I have stitch-witchery) but not sure how non-seen buttonholes would work. You could use fray check and wait until it’s dry to cut the holes. You could then sew buttons on by hand and in fact you can sew the buttonholes by hand which I think you would want to do as I don’t know how long it would hold up without the stitching but you could try it.
Would snaps instead of buttons work?
I haven’t tied snaps on this so I couldn’t say.
It would be nice with a hoodie attached to it.
You can actually loop part of it around your head like a hood, but I wouldn't attach one because that would limit the number of ways you can wear it.
Could you make a separate hood with some buttonholes to take it on or off?
I’m in Palm Springs and this travel wrap has been PERFECT! I’m wondering if you think gauze would work. I know you said a knit fabric was best but I’m wondering about making one out of that double gauze they make baby blankets out of. It would drape nicely and be perfect for the sun! What do you think? Would it have enough stretch?
I haven't tried that, if you do let us know how it goes.
Hi,Great tutorial. Do you sew the buttons on the wrong side of the scarf (side where you hem?)
No, right side.
Absolutely luv this!!! Am sharing the hell out of it, such clever Ideas!!! ❤️
Thanks!
I LOVE this and it's a perfect way for me to learn how to do buttons and button holes!!!
Thanks, and yes it's good practice.
Do you have to interface the side for the buttonholes side to strengthen that side?
It depends on your fabric; I didn't feel like it was necessary on this fabric, but on a thinner knit I might add pieces just behind the buttonholes (not the whole edge).
Thanks!
love it! thank you
Thanks for watching!