Hello! Im in desperate need of help. I purchased a KT controller that is 48v 45amps. The problem im currently having is that. When i lift up the bike and MAX THROTTLE. It spins fast and fine But where theres WEIGHT added like if im sitting on the bike. The controller cuts the power to my hub motor but the system stays on still. Im not sure how to fix this
There are quite a number of different aftermarket displays advertised, including the one your teaching how to program. What must I take into consideration when I am trying to get 3-4 miles an hour more on the top speed from a Magicycle Ocelot vs. a Himiway Cruiser?
Hello thanks for the video its very informative i seem have changed the setting for voltage to 12 for my 36v buts its not registering after accepting the setting to 12 seems the battery indicater is still saying battery empty buts the battery is at 41v any thing I should try
I don't believe so , the controllers themselves CAN be programmed from a computer but it's only if you hack into the system (google open-source kt controller endless sphere). Otherwise it is directly through the LCD
Hi, i have the LCD3, how do you change the max speed for each of the levels 1 to 5 ? all my levels are at max top speed, like all my levels are like the level 5.
Yeah I'd like to have a max speed for each level, instead it just changes the amount of watts which isn't good for hill climbing. Can't figure it out so I just have to engage the throttle for now.
i tried that kt3 with my e-scooter controller, it drives much better now but it does not show driving speed anymore. Also i tried the other communication protocols and checked the hall sensor wires and everything is okay. has anyone an idea how to fix that?
Try changing around the P2 Value , for a geared motor start with 1 , for a direct drive try 0 . Direct Drive is always 0 , but geared motors can vary between 1 and 6. Give that a try!
I have the tk lcd3u, bought with the bike at the sport shop and I cannot enter the settings you mentioned at the start of the video (the one with pressing both buttons within 5 seconds), I can only reset kilometers I made. What am I doing wrong?
@@ElectricBikeLaboratory I did, nothing happened, is it possible that the store the bike was sold to me could upload a software blockade, or custom software, or some physical blockade?
They are all mostly the same but I haven't tried LCD11
Месяц назад
LCD81F how do you put the speed on every pass, like pass 1 it use 20% batt, pas 2 40% pas 3 60% pass 4 80% 5 100% ??? i can not find it anymoreq, i can not get into that mode again, can you help me ?
Hi, folks.. I'm in troubles.. I did adjustments like showed in this video, but display doesn't show speed.. I tried on 2 different e-bikes, one of them with direct drive motor and another with geared motor. First time I plugged display on bike with geared motor, I have speed working fine. First time I plugged the display LCD3 of the bike with geared motor on the one with direct drive motor, it also showed speed. This means speed sensor and data/communication display cables are working fine on both. But, after configurations, 2 displays (LCD3 and LCD5) stops showing speed on first screen.. Any ideas?
@@ElectricBikeLaboratory Right.. I tried all options available.. P1 46 and P2 0.. After, I tried all options from 1 to 6.. Is there no other options involving speed?
Great video, I've turned my Cruise control on (C7 to 1) but mine won't Cruise control, it just turns the back light on when I long press the up button? Any ideas?
@@ElectricBikeLaboratory I got into the settings of the controller but I can't change anything (maybe it's locked from factory). I even tried pressing the right and left brakes while changing settings, I can't change the settings and lower the maximum speed. What can I do to lower the speed?
@@Or.H22 Maybe it is locked , there's not really an easy way to limit the speed if that is locked. You can try lowering the power level so that it can't reach a high top speed ? (C5 parameter = 3 is lowest setting)
@@Or.H22 Some of them are unfortunately locked from the factory. It MAY be possible to get another LCD display that isn't locked but I can't confirm for sure
Daripada lebih banyak korban ya berhenti saja gak usah diterusin perjalanannya....supir malah mikir dari pada banyak korban ya dibanting setir ke kanan
This is the most helpful video to mi Betsy, thanks a lot
Thank you! I learned a few things with that walk-though explanation.
Great Tutorial for all the DIY out there
Hello! Im in desperate need of help.
I purchased a KT controller that is 48v 45amps.
The problem im currently having is that. When i lift up the bike and MAX THROTTLE. It spins fast and fine
But where theres WEIGHT added like if im sitting on the bike. The controller cuts the power to my hub motor but the system stays on still.
Im not sure how to fix this
There are quite a number of different aftermarket displays advertised, including the one your teaching how to program. What must I take into consideration when I am trying to get 3-4 miles an hour more on the top speed from a Magicycle Ocelot vs. a Himiway Cruiser?
Speed limit would be the main one , your bike could be governed. This will only apply to the KT Brand of LCD Displays
Hello thanks for the video its very informative i seem have changed the setting for voltage to 12 for my 36v buts its not registering after accepting the setting to 12 seems the battery indicater is still saying battery empty buts the battery is at 41v any thing I should try
Yes try spinning the wheel in the air with the throttle for like 10 seconds and it should reset
Are they the same for MXUS xf19r 1kw geared hub motor? Irony is even mxus themselves don't know how to tune setting correctly. I've got a lcd5 display
I'd think the 1kw main ones are P1 is 87 P2 is 1 . But I actually haven't tested on that motor quite yet !
tx 4u vid..its help me lot
You're welcome!! :)
anyone happen to know what the function c15 is? I just bought this and saw it in there. Offers settings of 4, 5 and 6. no clue would love to know
Seems to be the speed of the walk function ! Hopefully this helps!
Hi. Can I do that with usb cable on PC, instead directly on LCD? Thanks
I don't believe so , the controllers themselves CAN be programmed from a computer but it's only if you hack into the system (google open-source kt controller endless sphere). Otherwise it is directly through the LCD
Hi, i have the LCD3, how do you change the max speed for each of the levels 1 to 5 ? all my levels are at max top speed, like all my levels are like the level 5.
Throttle gears
Okay, can it be more explainatory please.Thanks@@ElectricBikeLaboratory
Yeah I'd like to have a max speed for each level, instead it just changes the amount of watts which isn't good for hill climbing. Can't figure it out so I just have to engage the throttle for now.
i tried that kt3 with my e-scooter controller, it drives much better now but it does not show driving speed anymore.
Also i tried the other communication protocols and checked the hall sensor wires and everything is okay.
has anyone an idea how to fix that?
Try changing around the P2 Value , for a geared motor start with 1 , for a direct drive try 0 . Direct Drive is always 0 , but geared motors can vary between 1 and 6. Give that a try!
I have the tk lcd3u, bought with the bike at the sport shop and I cannot enter the settings you mentioned at the start of the video (the one with pressing both buttons within 5 seconds), I can only reset kilometers I made. What am I doing wrong?
Have to turn on display and enter menu immediately. If you wait over 10 seconds it will only reset trip meter
@@ElectricBikeLaboratory I did, nothing happened, is it possible that the store the bike was sold to me could upload a software blockade, or custom software, or some physical blockade?
@@hufnaaratnaaf Yes that's definitely possible. Many of them are locked
KT LCD11 is it the same setting...? I can't in the C1 setting...
They are all mostly the same but I haven't tried LCD11
LCD81F how do you put the speed on every pass, like pass 1 it use 20% batt, pas 2 40% pas 3 60% pass 4 80% 5 100% ??? i can not find it anymoreq, i can not get into that mode again, can you help me ?
P3 and C4 are the main parameters
Hi, folks.. I'm in troubles.. I did adjustments like showed in this video, but display doesn't show speed.. I tried on 2 different e-bikes, one of them with direct drive motor and another with geared motor. First time I plugged display on bike with geared motor, I have speed working fine. First time I plugged the display LCD3 of the bike with geared motor on the one with direct drive motor, it also showed speed. This means speed sensor and data/communication display cables are working fine on both.
But, after configurations, 2 displays (LCD3 and LCD5) stops showing speed on first screen..
Any ideas?
P2 value usually needs to be 0 with direct drive and 1 or 6 with geared. If you set to 0 you should always get a speed value
@@ElectricBikeLaboratory Right.. I tried all options available.. P1 46 and P2 0.. After, I tried all options from 1 to 6.. Is there no other options involving speed?
Great video, I've turned my Cruise control on (C7 to 1) but mine won't Cruise control, it just turns the back light on when I long press the up button? Any ideas?
Hold the down button when your going about 12mph
@@olivergodlewski4864 Thanks, I'll give it a go and report back.
On mine it's 👇🏻 down
Thank u
I want to change the speed limit to 50 km/h (today it is 72 km/h) but I cannot change anything in the controller's settings.
What can I do?
That very first parameter you can change the speed limit
@@ElectricBikeLaboratory I got into the settings of the controller but I can't change anything (maybe it's locked from factory).
I even tried pressing the right and left brakes while changing settings, I can't change the settings and lower the maximum speed.
What can I do to lower the speed?
@@Or.H22 Maybe it is locked , there's not really an easy way to limit the speed if that is locked. You can try lowering the power level so that it can't reach a high top speed ? (C5 parameter = 3 is lowest setting)
@@ElectricBikeLaboratory thank you for helping me. I can’t change nothing in the settings.
Maybe I can to reset it but I couldn’t do it.
@@Or.H22 Some of them are unfortunately locked from the factory. It MAY be possible to get another LCD display that isn't locked but I can't confirm for sure
on P05 its not possible on my display it wont go lower than 1 i cant get 0
There are a lot of companies that factory order their LCDs and they lock several of the commands
I have lcd3 fitted can I upgrade to lcd5? Thanks
Yes
@@ElectricBikeLaboratory is it just plug and play? Or do you have to recode?
Thanks
You will likely have to reprogram a few things but nothing that should take more than 5 minutes
Daripada lebih banyak korban ya berhenti saja gak usah diterusin perjalanannya....supir malah mikir dari pada banyak korban ya dibanting setir ke kanan