Hi, i have built it and everything works, just can I know how many amps you had running though the board, I know its 12v but how many amps is my question....
There's a software that converts the drawings into Gcodes. The machine reads the gcodes line by line while doing the commanded motions as per the gcode.. Check out inkscape, it converts images to gcodes
Hello friend, do you have measurements on the materials you cut to specific measurements? I want to follow along as closely as I can and sadly I am a stickler for trying to be as exact as possible in my mind it makes sense to be as accurate as possible thank you in advance.
Is there any requirement of external power supply for laser?? Beacuse when we apply 12v 1 amp supply all system is working but laser is not working?? Can you help ?
I HAVE A BIT OF A ISSUE TOO..abt the mofset is irlz44n or irfz44n better?PLS DO REPLY ASAP COX IM ALMOST DONE WITH THE PROJECT THO SOME COMPONENTS HAVENT ARRIVED!
I bought the laser, but it didnt even heat a paper. I have created everything and looks work fine accept the laser madual. It is just giving me a very brigh red dot. The laser i bought from the link you post from banggood. I am no confused. Should i use external transformer for laser?if yes, what exact voltage and amps should i use to get it burn something? Thanks
@Andrés García Ramón I forgot what I did , but I made it to work. I did connect sperat transformer for the laser. Also, It will not cut everything. I tried with leather and worked fine and regular plastic.
where do you order all the components for a board like this. i can never find any 1 location of where to order these. so either i overpay a ton for shipping to get them from diffrent websites. or i need to order enoegh parts to make 50 of these to offset the costs of shipping.
got the same problem. Everything works fine, but it seems like the lase has not enough power to "engrave" the material beneath. Did you figure out how to solve it?
@@DIYBuilder you are awesome sorry for bothering you, but i have one more question. Does that sketch is real template for laser box, with dimensions? Like just print with printer and cut from plywood?
Yes it is the real sketch. I used this sketch to make the whole case without the laser cutter. Only i used handsaw, metal file, sand paper and little bit patients to make this case.
Surjit Daa... Eita amake khub bhalo lagche
Nice build, very clean. =)
Thanks!
Okay wow this is a great project which is easy to make👌
*Great Invention* 🔥🔥🔥
Thanks bhai
@@DIYBuilder can you provide me
this looks pretty awesome..Going to make it soon 😊🙏
Yeah bro you should make it 😂😂😂
😃😃😃😃
@@DIYBuilder can you please share me via zawhkawng@gmail.com " arduino_laser_engraver_gerber.zip"? want to try laser transfer pcb.
I got it now, thanks again for you link
@@DIYBuilder how much did you spend in this
Hi, i have built it and everything works, just can I know how many amps you had running though the board, I know its 12v but how many amps is my question....
Hello, thanks for the video. Can you tell me what power supply do you use?
Normal +12v adapter
@@DIYBuilder Is 1 Amp enough?? Thanks
@@triforce1745 mine 1 amp adapter didnt work. Which one did you finally use?
Hey, nice video. How long does it take to engrave on piece of wood?
Hello, thank you for your video, how many volts is the power supply for the DVD drive for this project?
Hello bro , thanks for this amazing tutorial, kindly can you provide the layout design with dimensions?
very good video, could you pass the pcb, and explain a little about the programming?
Ok soon i'll upload the programming tutorial video
Thank you very much I appreciate it, could we get the Gerber file for the PCB?
Wow!!! Amazing bhai...
Thanks bhai
First view & the video is dam Amazing 😍😍😍😀😀😀
Thanks bhai
@@DIYBuilder ur wlcm
Hi, very nice build, one question, how did you save drawings to arduino and how do you transform drawings to actual moving of the motors? Thanks.
There's a software that converts the drawings into Gcodes. The machine reads the gcodes line by line while doing the commanded motions as per the gcode.. Check out inkscape, it converts images to gcodes
Hello friend, do you have measurements on the materials you cut to specific measurements? I want to follow along as closely as I can and sadly I am a stickler for trying to be as exact as possible in my mind it makes sense to be as accurate as possible thank you in advance.
This is quite a nice idea. where did you get your laser?
From banggood
Which power supply to use??
(Can u plz provide a link to the product...)
HEY im back with another question ..so abt this, what is the engraving scale like is it 40mm by 40mm? REPLY ASAP pls
yes its working area is 40x40mm
@@DIYBuilder can you provide me
Can you please provide a working link from which we can purchase that laser diode module
Can you please upload a video showing how to program and stuff
Ok I'll
Could you please enlighten me? Will the laser diode require a driver board if apply the control boards as same as yours in this video?
Are the drawings for the housing also available?
Sir ise pc kae bajayae mobile sae chlae sakhte hai please reply me as soon as possible
best vidio iwant the pcb from you and the box measurements
looks cool, but how do you control it, a program or coding? (i want to make it but i don't know how is controled :v)
great job!!!!
what the diagramme for an arduino uno?
acrylic sheet konsay dukan may milta hay plzzz batavo
bhai hardware ka dukan me milega
Please one video make in cnc laser programming and all setup
BRO UR SO LASY MAN I DID IT ALL MYSELF JUST BE BOTHERED TO REASEARCH
Is there any requirement of external power supply for laser?? Beacuse when we apply 12v 1 amp supply all system is working but laser is not working?? Can you help ?
Same issues man
me too
same issue here
any one has the solution ?
Power source 12 volts 2 amps minimum.
www.instructables.com/id/Mini-CNC-Laser-Wood-Engraver-and-Paper-Cutter/
sir can i use the one from 1000-1500mv but with 405nm, because that is the only one avilable for me
Awesome bro😍😍😍😍😍😍😍
Thanks bhai
Awesome brother 😊😊👌👌
Thanks bhai
I HAVE A BIT OF A ISSUE TOO..abt the mofset is irlz44n or irfz44n better?PLS DO REPLY ASAP COX IM ALMOST DONE WITH THE PROJECT THO SOME COMPONENTS HAVENT ARRIVED!
Irfz44n i used here
@@DIYBuilder and we dont need to provide it with any dc adapter or anything? just connecting to the pc is enough?
No you have provide 12v external supply
A66a acrylic sheet local kiser store e gie bolte hbe???
Hi brother, IAM from arunachal predesh
Hi
how much did it cost?
buena noche.muy interesante PERO que piesas se usan en los circuitos y las medidas de las partes donde montarlas?????
Any update about the video of how to control this little machine?
Upload within this month.
Just use GBRL and you burn it on the Arduino @@DIYBuilder
can i engrave acrylic using 250 mw laser?
im back again..sorry for the inconvinience man! BUT CAN WE REPLACE THIS WITH A 300 mW laser and still work with the same components?
Yes it work
Does it cut acrylic or only design
Only design
will it work if I join a 12v adapter to Arduino instead of joining in PCB?
I bought the laser, but it didnt even heat a paper. I have created everything and looks work fine accept the laser madual. It is just giving me a very brigh red dot. The laser i bought from the link you post from banggood. I am no confused. Should i use external transformer for laser?if yes, what exact voltage and amps should i use to get it burn something? Thanks
Did you resolve your issue? I am stack in the same problem. no heat, same laser
@Andrés García Ramón I forgot what I did , but I made it to work. I did connect sperat transformer for the laser. Also, It will not cut everything. I tried with leather and worked fine and regular plastic.
From where is the laser or how many watt is it?
WHICH SOFTWARE AND LANGUAGE IS USED FOR PROGRAMMING?????
Arduino
Neat work. Laser wattage?
250mW
where do you order all the components for a board like this.
i can never find any 1 location of where to order these. so either i overpay a ton for shipping to get them from diffrent websites. or i need to order enoegh parts to make 50 of these to offset the costs of shipping.
Hi. Can I use a 100mw 650nm laser?
Very nice friend
THanks
Where should we uplod the design
Hello how can i calibrate the x and y axis to get exact measured output
I use 200-250mW laser but it doesn’t burn anything ?
nice Idea bro
Thanks bhai
From where I can get the PCBs and components?
I have updated the parts list and soon i will update the pcb links :)
How much amperes do you supply for the circuit?
12V-?A
Thanks
good where is the part 2 video
Hello, the H1 conector what is for?
amigo las medidas exactas me las puedes dar?
Frame measurement describe please I hope you will answer
Hi do you have spare pcb's
where can i get the jlcpbc
what is the overall cost of the complete project
Can i use 47K ohms resistor instead of 47 ohms
which laser u used
250mW 650nm laser module
Is there a link to the pcb aswell? Cant find it
Dude I made the project but the laser isn't working even with the 12 v adapter being connected ..REPLY ASAP MAN
ive got exactly the same problem. Did you figure out how to solve it? Differen laser maybe?
same problem
I get very sad when awesome videos don't get except 3k views
Yeah bro you are right 😭
The reason is because they don't share plans...go check others out where they share everything...and they get millions of views
Great work
Sir how to contect with u
Can we get the Gerber file for the PCB?
Send me your email id
DIY Builder ive just send you an e mail
Me too please
muhammad khaled a lot of people are looking for the gerber file
i can cut wood with this laser ??
no
Do we really need a heatsink???
And here can be put laser on 500mW??? Answer please
yeah better option
@@DIYBuilder but 1000mW?
Layout measurments please
Bro give that app sheet measurements plz give bro
Hey bro i made this project but my laser is not working on full power can you please guide me??
got the same problem. Everything works fine, but it seems like the lase has not enough power to "engrave" the material beneath. Did you figure out how to solve it?
CoastCrafters DE hi bro I want code of it
Bro pls share total cost in rupees..for this project...
bro design size plz
Kia muje koi code share kr skta hai plzzz
How ta make with Arduino Uno r3 and CNC shield
coming soon
Bro your any link is not working plz provide direct links
Can i buy ur pcb from e bay?
Bro frame size plz plz ??
Can you give us box skech with dimensions?
Ok i will update the link soon
@@DIYBuilder you are awesome sorry for bothering you, but i have one more question. Does that sketch is real template for laser box, with dimensions? Like just print with printer and cut from plywood?
Yes it is the real sketch. I used this sketch to make the whole case without the laser cutter. Only i used handsaw, metal file, sand paper and little bit patients to make this case.
@@DIYBuilder which program did you use to create such printable template?
DIY Builder where is code for arduino
Hi bro my name is teja
That machine price tell me bro
I can purchase that machine plz.. Reply
I have money 1500- 2000
can we do it horizontlelay
couldn't i just use an old anet motherboard for this?
Can we get the file for the PCB pls?
Check again the description i have updated the link :)
thank you very much!!!
Total cost kitna padega banane mai
1000-1500
how me na cut the wood using laser
my laser not engrave
Where is the arduino code
where is the arduino code man
Check in description
Great
Thanks
Wow👍
Thanks yr 😊
Hey
Update the schematic please soon
Bhai please update karde schematic
Ok bhai :)
@@DIYBuilder thanks bro
@@nutimaharani7377 Description check karo update kar diya :)
Code
fraME DESGIN PLS
Good day sir, may we ask what is your email? we have a lot questions to ask for our project. thank you!