Converting your chainsaw to run Panther 1/4 Pitch
HTML-код
- Опубликовано: 10 сен 2024
- I show how you change the drive sprocket on a Stihl ms200t and an Echo 355t. Most saws are going to be very similar to what you see in this video.
This is required to run the Panther Bars that we sell on MonkeyBeaver.com
Find Panther kits here monkeybeaver.c...
RIP Jed Walters. 🙏
Only knowing him thru the screen it still hit me like a brick wall, all my thoughts an prayers to his family an loved ones, "i love you Jed"
I ordered a kit last week. Amazing customer service, fast shipping and great products. Can't go wrong.
I have the okd Panther bar on my ported Echo 355T climbing saw. Absolutely love it, even though their older bars are rather soft. It cuts so well and that 16” balances like a 12” factory bar.
Hi to get the number of drive links for 1/4" pitch chain, would you take the number of drive links for a 3/8" chain and multiply by 1.5? So that a 52 DL 3/8" pitch translates to a 78 DL 1/4"? The drive sprocket might be a different size, but adjustability should take care of that?
Love that you just made this… haha I literally RUclipsd this yesterday cuz I was converting! 😂😅 Thanks for the content!
And don't forget to grease the oiler gear and needle barrier Please
Def throw a little grease on the needle bearing at this point.
Do I need to purchase a different needle bearing for the 1/4 sprocket on a CS 2511? Also, I’m assuming you don’t have to change the worm drive on the cs2511 like you do on the Stihl?
Our kits don't come with new needle bearings as it's not necessary to change them, unless yours needs replaced due to age / wear. And no, you don't need to change a worm drive on your echo, the 1/4 pitch sprocket is all you need to change 👍
I'd like to convert a vintage echo CS-4000 (yes 4000) because I can't find a replacement bar. Would you have a kit for that saw? And very well done video - clear and concise!
Thanx
Do you know if you can convert the echo e-fore top handle to quarter pitch yet?
For the stihl panther kit - if I select 16in bar and “yes” on needing a sprocket - does that fit a 201tc? Just didn’t figure the 192-201 would all take the same sprocket and worm drive
Yes it takes the same sprocket and worm drive. In fact, the sprocket and worm drive is exactly for the 201t, it just happens to fit all others
@@monkeybeaver626 sweeeet - thanks!
Part number?
Any felling belts in the future?
Will this fit an echo CS 330t ?
What would a big saw on 1/4 pitch be like?
The bar / chain setup might not hold up to that added power, also, you probably wouldn't be able to find a 1/4 drive sprocket on a larger saw.
🤘😎✌️
So this will fit a stihl 194t ok
Do you have a kit for a 540t gas not electric.
No sorry, we don't. Haven't yet found any 1/4 drive sprockets for them