Chrysler Town & Country, Dodge, Jeep Key FOB Cheap Repair Fix. 2008 - 2016.
HTML-код
- Опубликовано: 28 сен 2024
- My van's key FOB was acting up and randomly pressing buttons by itself, so doors were being randomly locked or opened. Instead of paying big bucks to a dealer to reprogram a new remote, here is how I found the issue and fixed it.
The part I needed was about $11 on Amazon and is linked below:
www.amazon.com...
A thousand THANK YOU's I am a single mom and by watching your video I was able to fix my key fob all by myself. I had the same problems with my key fob that you did.
So glad it helped you out!!
I am glad I saw this it was exactly the problem I was having! I cleaned everything off really well with alcohol then used a toothpick to put dabs of 100% silicone back where the metal should be, silicone bonds with metal and the rubber and still keeps that elasticity. Everything's been working perfectly and when I cracked it open to double check the metal caps are staying firmly in place.
This worked perfectly and saved us a bunch of money. The new fobs come with unprogrammed ckt boards, but I just re-used our existing ckt boards. I just wiped them down with a paper tower and used the replacement housings. The new fobs come with blank mechanical keys that can be used to clone the old keys also.
Yes and this can be done on a lot of other vehicle FOBs also. I'm about to do the same thing with an older Honda Civic FOB (buy the blank FOB case and install the guts from the original one).
This was a great fix. I paid $14. for 2 of them on E bay.
Thank you! This just saved me $300 in buying a brand new fob! I had the exact same problem where the little rubber circles were just floating around. Thank you so much for this video!
Glad it helped out someone and saved you some $$ !
@@RepairNut but where do you get an empty fob?
@@sachsgs2509 Amazon. I put the link to the one I got in the video description.
@@RepairNut thank you!!!
Thank you, just experienced the same problem! Did what you said to do and whola! It worked! Good job!
You are my hero!! The dealership had no clue and I thought I was going insane!! THANK YOU!!❤❤
thank you so much!!
Just did it! Saved me a ton of money thanks.
Thank you from Brazil!
Thank you so much and for amazon link also. It worked.
You're a GENIUS!!! THANKS ☺️
Where do I buy a replacement key fob shell ?
@@recksietoyou7079 check the description for the video, I put a link to one I found on Amazon.
I tried to replace old rubber button with a new one and it didn’t work so I had to switch back to the old one.
Can you please tell me why it didn’t work?
Yes , my key fob is like the same as in the video
I would suggest replacing the whole rubber part with a replacement rubber part (not just the button). Like I did in the video. If it didn't work for you, I don't know why that would be, maybe your fob has more damage to the circuit board part??
That was very helpful
Thanks for sharing
Do you have the link?
Awesome
you are a hero. there is nothing worse than this type of problem. the example to us all is knowing that sometimes you can just open something up and look. the caveat would be to know when not to take something apart past the point of never getting it back together again. thank you sir.
Thanks for the link, definitely allowed me to repair my fob without losing an arm and a leg.. You are the Man !
Thanks for the tips, especially buying a circuit-less fob & switching it out for the worn one. Miss being able to start a vehicle with a plain old metal key. 🔑
THANK YOU SO MUCH FOR SHARING THIS! I have the same exact van and same exact problem with my key fob. And sure enough, the little discs were all messed up. Dealership wanted $450 for a new one! Thanks for helping me save ALOT of $$$
what glue do u use to glue the disks back in place please?
I didn't glue the discs back. I bought the replacement empty key Fob in the link in the description. It has a new rubber pad with all the discs on it. You can then put your circuit board from your old remote in the new plastic case. However others said they used some silicone to try to glue it, or anything that is flexible.
yea none of my little disks stay in place iv resorted to super gluing the tabs onto the rubber and for the most part it works but the 2 sliding door buttons wont work still but hey now my chrysler unlocks rather then triggering the alarm
Thank you! Car had been randomly beeping for a few days, liftgate locked and would not open, doors locking upon exiting vehicle and i had tried replacing battery in key fob, nothing, still random beeping and fob only working sometimes. I had an extra key fob (not working at all), but, the little metal thingies all in place. Was scheduled to go to mechanic tomorrow, but, YAY now i don't have to!!! gonna order one or two of these just in case.
Thanks! This is the problem I was having -- back lift gate opening by itself. Opened up the fob and found the metal disc was loose. Saved me a lot of money, time and frustration! thanks again.
Great, thosevlityle inside disks were causing my problem .Thanks so much.
Thanks Travis. This was great camera work and I also was able to follow your link to get the correct part.
Thank you so much this is exactly what I needed
Thanks for this video.
Thank you so much!⚡️☺️😊😀
Thank you sir great job
Hi can you reset key ? I sold my car and wznt to reprogram one of key to my new car both sNe year of car and same key like you have
Maybe the dealer could reprogram a key, not sure.
Do you have the link for the key fob you purchased I can't find that one and it's the same one I need thanks....
The link is already posted in the video description.
THANK YOU!
Looks like they sell just the rubber part with the buttons glued in too.
that would be even better. Thanks.
@@RepairNut I ordered one. It works very well too!
Excellent video
🌺 ρɾσɱσʂɱ