Drain the tank? Should be done regularly so I assume that’s why you didn’t in the video. But still a good idea while doing maintenance. Good video though
Usually loosen the motor mount bolts and move the motor forward. Tighten them back up. Press down on the belt in the middle between the pullies. You should have about 1/2" of play by pressing down on the belt with your finger. If not tighten further.
My compressor sometimes gets "stuck" on startup. I often have to give the pulley a tap or palm push to start. Currently, the guard is off. How do I fix this?
"Time to take care of your tools and your tools will take care of you."
Awesome compressor maintenance...Kool!
😎👍
Jerry if I remember right the head gasket was one you made and it's still working great after a year . Nice👍👍
it sure is bonus for me, didn't think it would last but as long as it does i won't source out a new gasket
That's what I need a large compressor like that. Once I get the shed cleaned out that will be my next big purchase.
Drain the tank? Should be done regularly so I assume that’s why you didn’t in the video. But still a good idea while doing maintenance. Good video though
what happens if you run it without the air filters?
I have the exact same type of air filter element, but I can't seem to find any replacement anywhere. Did you find replacement for yours?
What's the general opinion on using Amsoil on a new compressor? Is it a good idea or should I put some time on the compressor with regular oil first?
How do you tighten the belt if it needs it? Great video by the way!
The frame is slotted
Usually loosen the motor mount bolts and move the motor forward. Tighten them back up. Press down on the belt in the middle between the pullies. You should have about 1/2" of play by pressing down on the belt with your finger. If not tighten further.
Anybody know where you lubricate the electric motor bearings? Or if it's even necessary
My compressor sometimes gets "stuck" on startup. I often have to give the pulley a tap or palm push to start. Currently, the guard is off. How do I fix this?
+Todd Hayter sounds like you have a dead spot in your motor
The centrifugal switch on the motor may be gone
either check your motor centrifugal switch on a capacitor might be bad.
Jitendra rajbhar
All type compressor service provides
Pls call 9561220176,7709134775
I like to urinate in mine while drinking beer as this helps to keep the oil thin and smelling nice
why the oil changing to white
How often do you drain the water out of the tank?
everytime i use it and everytime i go in the garage
So could you use a regular 30 weight motor oil? Or should a guy search for that "comp oil" another quality Vid Jerry
30 weight non-detergent should work in most compressors. Wouldn't hurt to show the model number to your local supplier to check.
Any oil is better than no oil.
Is it ok to use engine oil in a compressor ?l am out in the Bush doing mining
No
how much liter oil did you put in compressor
Jitendra rajbhar
All type compressor service provides
Pls call 9561220176,7709134775
How to solve the problem or air. I just changed the pistons but still the compressor is not making the air. What would be the solution?
Jitendra rajbhar
All type compressor service provides
Pls call 9561220176,7709134775