Literally BEST YT video on this machine that I’ve seen. I’ve watched probably 50 videos and trying to find a straight answer on the needle size/type. Watch this one and get the answer within the first minute and half. Thank you SO SO much ☺️
Doa kan saya semoga Allah memberi kekuatan kepada orang yang sentiasa mengingati Allah dan Rasul yang tidak dapat menerima hakikat bahawa mereka tidak siapa yang tahu apa yang berlaku doakan sebanyak mungkin akan menjadi lebih baik daripada apa yang berlaku doakan sebanyak mungkin akan menjadi lebih baik daripada apa yang berlaku doakan sebanyak banyaknya aammiiiinn ya rabbal alaminn terbaik sekali okey terbaik sekali okey terbaik sekali okey terbaik sekali okey terbaik sekali okey terbaik 😢😮😮😅😅😊😊😊😅😊
wow so helpful. thank you. do you think I can sew through layers of denim with stabilizer, pockets, lining and straps? I make denim bags that have layers and using a basic domestic machine is killing my arms and the depth makes it impossible at times.
How many pins this juki machine.. I have this new machine but it have only 2 pins neutral and phase.. it don't have earthing pin so it's shock when I touch the metal
Sorry to say that there's not a lot of trouble shooting tips in the manual, but you can find it here; www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew you have to scroll down on the page to find it though. We're trying to make videos that answer specific questions, so if you have one, please ask!
Nice video! May I ask if this model is ok also to sew some small booklets? I already do with a vintage machine so I guess with this one is possible as well. The thickness of the booklets is no more than half centimeter. Thanks in advance
Oh boy, the 8100e comes up again. Well, ya know how car manufacturers will often make a super base model, that they don't even advertise, but they want to catch the lowest possible entry point for purchases? Yeah, well this is that machine. It is a Juki, but it's not even listed on Juki's website as an industrial machine. They seem to keep it around as a little secret. If you want the absolute lowest cost on a Juki, that's it. That said, we've never even seen one in person, much less tested it out. So, we can't really speak to it's performance and reliability. If you choose to get one, let us know what happens! Best of luck!
Question: Does this machine has the ability to keep the needle down, while I adjust to keep sewing along without having to keep bringing the needle down? I'm not sure if I'm making any sense to you.. lol
Machine sawing juki 5550 okey 8700 okeynk terbaik sekali okey terbaik sekali 😮😮😅😊😊😊😊😅😅😊😊 Mana pun asalkan ada zig zag okey terbaik sekali okey terbaik sekali okey 😢😮😮😅😊
Well bud, we're running a special for $750, but that's just in the continental United States. I'm sure you can find one in India since JUKI is a global company. Best of luck!
No, this DDL-8700 is made for light to medium weight. You will need a walking foot machine for canvas and upholstery. The smallest machine you will want to look at is the Juki DNU- 1541S which can be found here www.cutsew.com/Juki-DNU1541S-Walking-Foot-Sewing-Machine
@@Lmobe The lightweight leather might be okay on this straight stitch machine. However, where you may experience problems is in the corners of the bag, where the material is bunched up. I've never personally tried to sew the project you're describing on this 8700, but it might be possible.
@@CutSew is cotton canvas okay to sew on this machine? I am currently in the process of returning my Sailright fabricator and looking for a new machine. I am still new to sewing and I mostly work with organic cotton and thread. My Sailright kept breaking my thread so I will not be keeping it since it breaks delicate threads.
The 8700 is not made in Japan. It is made is different Juki factories in China, Taiwan, and Vietnam, following the same Juki standards they have in Japan.
I have 40 years of sewing experience, I have never seen such a garbage sewing machine in my life, and please check that it is not made in China, which has many problems, and the table is non-standard, small, and not sturdy.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Literally BEST YT video on this machine that I’ve seen. I’ve watched probably 50 videos and trying to find a straight answer on the needle size/type. Watch this one and get the answer within the first minute and half. Thank you SO SO much ☺️
I agree!!
Me too👌
Doa kan saya semoga Allah memberi kekuatan kepada orang yang sentiasa mengingati Allah dan Rasul yang tidak dapat menerima hakikat bahawa mereka tidak siapa yang tahu apa yang berlaku doakan sebanyak mungkin akan menjadi lebih baik daripada apa yang berlaku doakan sebanyak mungkin akan menjadi lebih baik daripada apa yang berlaku doakan sebanyak banyaknya aammiiiinn ya rabbal alaminn terbaik sekali okey terbaik sekali okey terbaik sekali okey terbaik sekali okey terbaik sekali okey terbaik 😢😮😮😅😅😊😊😊😅😊
thank you this will helpful. my juki ddl-8700 was delivered this morning. and I will be ordering supplies also.
I just got my oil from you guys ! I got it super fast !! Thanks !!!
Great to hear!
Thanks for sharing the video, greetings from 🇧🇿
Thanks for watching!
❤
How much
Has this man ever considered hand modeling? He should!
that compliment went from his hands to his head!
😂
I got it today and love it ,amazing machine .
wow so helpful. thank you. do you think I can sew through layers of denim with stabilizer, pockets, lining and straps? I make denim bags that have layers and using a basic domestic machine is killing my arms and the depth makes it impossible at times.
Nice sewing machine
Nice of you to explain how to fill the bobbin but how do I install it?
Are there any different feet for this machine? Eg rolled hem foot, etc? TY
Is it normal to make static noise when turned on?
does this plug into a standard house outlet110
Mine didn’t come with a light! Is it suppose to?
Lights are an add on for the 8700
How many pins this juki machine.. I have this new machine but it have only 2 pins neutral and phase.. it don't have earthing pin so it's shock when I touch the metal
Can this machine handle 4 layers of 500Cordura?
Maybe, but a walking foot would be better.
@@CutSew can you purchase a walking foot for this machine?
where can i find the instruction manual? with tips, troubleshooting, etc.
Sorry to say that there's not a lot of trouble shooting tips in the manual, but you can find it here; www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew you have to scroll down on the page to find it though. We're trying to make videos that answer specific questions, so if you have one, please ask!
Can you change the foot to a stepper foot?
How much would be the price for this original JUKI sewing machine?.
Nice video! May I ask if this model is ok also to sew some small booklets? I already do with a vintage machine so I guess with this one is possible as well. The thickness of the booklets is no more than half centimeter. Thanks in advance
what is diferrent between 8700 and 8100e
Oh boy, the 8100e comes up again. Well, ya know how car manufacturers will often make a super base model, that they don't even advertise, but they want to catch the lowest possible entry point for purchases? Yeah, well this is that machine. It is a Juki, but it's not even listed on Juki's website as an industrial machine. They seem to keep it around as a little secret. If you want the absolute lowest cost on a Juki, that's it. That said, we've never even seen one in person, much less tested it out. So, we can't really speak to it's performance and reliability. If you choose to get one, let us know what happens! Best of luck!
Is the table height adjustable? What thread would you recommend for this machine if using it for quilt piecing? Could you use Glide40?
Wow Nice juku best 👌
Question: Does this machine has the ability to keep the needle down, while I adjust to keep sewing along without having to keep bringing the needle down? I'm not sure if I'm making any sense to you.. lol
Is there a Machine that uses a second spool instead of a bobbin?
Yes. It is called a chain stitch machine. It has a looper in bottom instead of a bobbin.
What is the button control beside the on/off switch for? Is it for a fuse or something?
Nice!
This have a servo motor?
Yes
How much it cost may be
www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew
Good for leather??
Fashion leather - very thin stuff - only
Where does the magnet goes that came with the machine
In the oil pan to collect any metal shavings that can occur over time.
I don’t have any oil. Would any sewing machine oil do?
You will need the oil for industrial sewing machines
@@antonioteul3590 thanks I found some
Price in Kenya shillings please❤
What’s the price now in 2022
Sir is this considered a silent sewing machine or a normal one?
Silent, because of the Servo motor
@@CutSew thanks for responding sir
Super
We need cina velvet prayermat swining machine
what is the price of this machine?
www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew
Will it sew leather for wallet
No. That would require a walking foot machine.
Pls can some help me to how can i order this machine
Price how much?
www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew but I'm sure you can find it a little cheaper somewhere else.
Price
Got it. Love it.
How much price
Why the trends keep breaking when I reverse
Hello. I found a Juki DDL 8700 that was made in Taiwan. Is that a Fake Juki?
No. They have a facility in Taiwan.
Hom much
I want one
don't we all
Where can I buy this?
What are its motor specifications
can the machine sew denim?
Nope. Well, a little, but it's not really intended for it. That really depends on which stitch you are trying to accomplish.
Price i want this
Just visit us online at www.cutsew.com
In amazon is 795$
Buy at cutsew the best price from other believe me.
@@CutSew pp
@@dariindonesiakeflorida668 how much please
price kia hai
This old or latest
This is the latest DDL model from Juki.
Zigzag stitch?
Machine sawing juki 5550 okey 8700 okeynk terbaik sekali okey terbaik sekali 😮😮😅😊😊😊😊😅😅😊😊 Mana pun asalkan ada zig zag okey terbaik sekali okey terbaik sekali okey 😢😮😮😅😊
Nope
कीमत कितनी है
+Cut Sew Does this machine come with a Speed Reducer for leather work? small wallets, key chains, moleskine covers and more. Anyone know?
What is the price this machine and where is the dealer in India
Well bud, we're running a special for $750, but that's just in the continental United States. I'm sure you can find one in India since JUKI is a global company. Best of luck!
Hi from india ,price ?
Not available
Can you drop the feed dogs for free motion quilting?
Yes, some other parts may help too. Looking further into this.
I saw a video on RUclips that suggested turning the stitch wheel to zero and taping over the feed dogs
Where is it made, Japan or China???
Merrit is correct. The 8700 is made at the JUKI factory in China. The 5550 is made at their Japan Factory.
Will this do boat canvas, as well as upholstery?
No, this DDL-8700 is made for light to medium weight. You will need a walking foot machine for canvas and upholstery. The smallest machine you will want to look at is the Juki DNU- 1541S which can be found here www.cutsew.com/Juki-DNU1541S-Walking-Foot-Sewing-Machine
@@CutSew ..so no leather products such as small bags or overnight bags w/ 5oz leather will work for this ..i take it
@@Lmobe The lightweight leather might be okay on this straight stitch machine. However, where you may experience problems is in the corners of the bag, where the material is bunched up. I've never personally tried to sew the project you're describing on this 8700, but it might be possible.
@@CutSew is cotton canvas okay to sew on this machine? I am currently in the process of returning my Sailright fabricator and looking for a new machine. I am still new to sewing and I mostly work with organic cotton and thread. My Sailright kept breaking my thread so I will not be keeping it since it breaks delicate threads.
@@sinoda3340 Hei how about your experience with sailrite. i am thinking to return that thing also.
India price how much
ดี.ดีแอวรุ่น8700เฮสมีไหม
What are the price?
www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew
ของใหม่เหรอราคาเท่าไหร่รุ่น8700
هل هي ياباني
Ill be getting this soon from you.
Sir how much price
www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew
Sir price??
www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew
Price in Pakistan
What this price and whu are reserved. Shop Pakistan
Is machine ke Pakistan mein kya price hai
where can i get this machine in ( Ottawa) Ontario Canada?
Thanks
Not available
What is the price this machine
Just visit us online at www.cutsew.com
What is the price this machine?
Price in Pakistan shop in pakistan
good video except you don't show how to insert bobbin into case and into machine.
Check out our DDL-8700 Playlist, with over 20 videos on this machine alone. ruclips.net/p/PLOL5KlPT1mwZI2BuDubIojS7_6viydfAP&si=qEHT3v7aCqU8AKCY
Price in pqkistan
We only sell this machine in the U.S.
How can I get this machine to buy?
just buy it here www.cutsew.com/juki-ddl8700-single-needle-lockstitch-fully-assembled-ready-to-sew
Japan JUKI DDL 8700
The 8700 is not made in Japan. It is made is different Juki factories in China, Taiwan, and Vietnam, following the same Juki standards they have in Japan.
Hii Hasmukh Vansfoda Indian
Tokyo Japan JUKI DDL 8700 model
What is the price of this model ?
( in Indiana currency)
Pricejyki8700
$800-$1,000 depending on options
दातरी उपर लेने का
Magkano
DDL 8700 RS,
Hi
Thread cutter
Refika Usta this machine does not have a thread trimmer. That would be on the model Juki DDL8700-7wb.
Cuánto cuesta necesito una
Get yours on sale today www.cutsew.com/Juki-DDL8700-Single-Needle-Lockstitch-FULLY-ASSEMBLED-READY-TO-SEW
Ji apna number bhejia hamko yah machine chahia
We currently only deliver in the continental U.S.
Je juke mashyen Layne ha pirce
Juki Machine delivery yad online murder 2
ے کھدر ملتا ہے
Parice in indian moni
ราคาเท่าไหรอยากได้มือ1
หลัง
Aliw
Hau mach parich
Call me
7004652359
Your number isn't working for some reason, call us at 1-800-241-4953
I have 40 years of sewing experience, I have never seen such a garbage sewing machine in my life, and please check that it is not made in China, which has many problems, and the table is non-standard, small, and not sturdy.
ے کھدر ملتا ہے