Hyundai Elantra Problem SOLVED ... Fluctuating RPMs Surging HARD START
HTML-код
- Опубликовано: 28 сен 2024
- surging rpms? hard start? No start at all? tried a bunch of things already? This will solve it
Did this help you? Use my Amazon affiliate link for your shopping today. It really helps
amzn.to/3ddXmlb
Mate, you’re the reason I’ll still stick to my 2012 for another 1-2 year(s) . Thanks a lot.
Glad I could help please give my video a thumbs up and subscribe it really helps my RUclips channel
@@BrandonActionJackson I need help
@@BrandonActionJackson Hey man I got a push to start 2018 Hyundai Elantra Sport, last night I accidentally let off the clutch without applying enough gas while reversing and my car stalled. After i turned it on and parked, the car started having idle issues where the RPM goes below 1000 and goes up and down over and over again. Could you share the procedure to put the car in the learn mode after doing everything with the throttle body. thanks
Still have my 2012 gls ….. ride till I die lol…. @Brandon awesome video!!!!!
BrandonAction Jackson, Thank you so much much for posting this video. I have been fighting with the same issue for the past few years on my 2015 Hyundia Elantra. I came across your videos on the exact same problem. Yesterday I removed my throttle body and cleaned out all the carbon build up. I threw everything back together and my car idles smooth with the AC on. Thanks again.
Taurino Tostado you’re very welcome sir I’m glad I could help
@@BrandonActionJackson hey Brandon my 2012 Hyundai Elantra is shutting off and stalling at red lights and turning into places , I figured it was the crankshaft position sensor so I changed it and it still stalls but not as much and now only when turning into parking spots or rarely at red lights , I never get no check engine light only the low engine oil pressure light , would you think it would be the throttle body needs cleanings ? We are changing the spark plugs and changing oil this week , I am thinking of cleaning the throttle body as well
@@adrianmendoza13600 you’re getting low oil pressure? That should not be related to the throttle body unless your Rpm’s are dropping extremely low but even then I’m not sure that would happen. It never hurts to clean the throttle body. But this could definitely be another issue
@@BrandonActionJackson thank you I’m going to try it out because my rpms do drop down sometimes when getting to a parking spot
@@adrianmendoza13600Hey did you ever solve your problem, my girl is having the exact same issue in her 2014 Elantra
Hi Brandon, I am not sure if you still check this channel. You said not to remove the throttle body, essentially,we have to remove all the bolts in the throttle body, I am not sure if I understood. As much as I love my 2014 Turbo Veloster,things keep happening, but I am at 104.000 miles.
MY SUGGESTION. For preventative maintance I would not remove the throttle body. Buy a can of Mas air flow sensor / throttle body cleaner. Follow what the guy told you to remove the intake hoses from the air box to the throttle body. Spray on a clean microfiber towel. DO not spray directly onto the throttle body itself. Gently move the flap to expose all the crud and start cleaning. All the surfaces the flap comes into contact with including the flap itself front and back and the pipe. If you remove the throttle body you may need to replace the rubber O ring gasket. Some Vin numbers have them. So to avoid this snafu don't remove the thing..just clean it. Do the releasing procedure just like the video says.
Thank you , the throttle body though I cleaned it ,I thought ok but the back was really dirty along the edges. My car runs like new. Thx thx
I’ve cleaned the throttle body but I’m still having surging rpms
Love it . Loved your Jesus message of salvation. My 13 Elantra has been idling low. I thought it was throttle body but didn't know how to move the butter fly thing. The stick idea was brilliant. Thank you, I'll do it.
This worked perfect for my 2018 elantra. I was having surging rpms every time I came to a stop. I am an uber driver so I drive a ton of miles. I thought I was going to have to replace the compressor or the battery because it couldn’t handle the load anymore. I have to remember that my car isn’t brand new anymore so these things will come up once in a while.
How did you reset the keyless Elantra?
What is the relearn procedure for a push to start?
Did you figure it out?
I'm going to try it even though I feel very nervous about it.
Could you post a video showing how to remove and clean and than putting it back. I'm have surging Rpms issue. Thank you.
How do you do a reset with a push button start?
Could you give me the "relearn" procedure for a 2018 Elantra. Push start. Thank you
Sounds similar to the moving flap (butterfly valve) on the old carburetors. Not a mechanic so sure what that was called.
almost smae problem as me, hyundai tucson ix35 GLS, rpm drop to stall when coming to stop. and then every i start the engine, engine start but not idle, rpm eventually drop and off again, start the engine again, same things happened, engine started but rpm goinback to zero/off again, one way to keep the engine running is only taping the gas pedals to holding rpm for not dropping, same as yours?
Car was fine I changed my spark plugs and coils now I get misfires and rpm serges, on brand new oem coils, plugs.. so frustrated guess I’ll try this next and update
Did you try this?
@@michaelrivera2564 Yeap still no luck
@@reggiestewart6976 how its going now? was it solved?
@@reggiestewart6976 bro mine is doing this right now and I’ve done everything! The pcv valve did help but no luck. I’m thinking clogged cat o2 sensor and collapsed fuel line. It’s a 16 Veloster Turbo. So hey yeah if something work plz let me know. Mine only surges on 1st at idle really
@@mikemozingo5425 man some how I ended up blowing the ecm that’s was the problem for me need new computer
Video starts 2:40
Thank you so much I fixed it my self, easy and cheap way to fix
What is the code for a push start?
I”ll try this, hope it work on my tucson
Please help me, I have a 2013 elantra. Some few days ago, I had the check engine light on and took it to my mechanic. He told me its the crankshaft position sensor. I got it replaced but the car still starts and dies. It jerks as well and also when started the rpm cursor is on zero.
Deejay ray Ventures does it still have the check engine light? Are you sure he said crank shaft and not cam shaft? If the sensor is replaced and it was a crankshaft not camshaft it could very well be a dirty throttle body
@@BrandonActionJackson Naa he said its Crankshaft, even today he asked me to change the spark plugs which I did but still not working as it used to. Please should the throttle body be removed?
Deejay ray Ventures it definitely wouldn’t hurt. Just remove the throttle body I cleaned it without taking it loose from the coolant line going to it I just unbolted it and cleaned it with carb cleaner. On the engine side you will see black carbon build up and on the air box side you may see a little but it will look fairly clean
@@BrandonActionJackson can u help me
@@jlijahgarcia3307 with?
I went to the mechanics 5 days ago. Mechanics changed my cars engine fuel and then washed my car, and after few hours, my car stopped gaining the exact speed.. the same mechanics told me to buy catalytic converter which is for $1500 to $1700... I believe that while washing the car and changing the engine oil, they made a defect in my car intentionally...now when my car is neutral, it uses 1 gallon in almost 15 20 mins....can anyone suggest...plllzzzzzzz its only 33000 miles 😢😢😢😢
You should do a video of you doing it
please help my elentra 2013 suddenly running at 900 rpm after getting warm
I did this then I had to replace my crankshaft sensor good as new now
Marcos Dejesus did you have a code for the crank sensor?
Brandon Jackson yeah a couple weeks passed I got tired of my car dying on me. The the code for the crankshaft popped up on the odb. Replaced the part and I’ve been running smooth since
Brandon Jackson what is the relearn procedure for a push start.
kammi risper press the start button two times without depressing the brake pedal for atleast 10 seconds then turn off for atleast 10 seconds this procedure allows the ecm to automatically learn the throttle valve position
My sisters 2015 elentra is surging at cruising speeds. Not all the time.. how dirty was your throttle body mate? Mine wasnt bad but my dad cleaned it anyways.
Wouldn't it be helpful to actually see you clean the thing?
Hey broda tengo i30 2013 With power button, how should I do, can you help me with the testing process ?
Please 😢
Thanx for the vid. My son’s 2014 was revving high and this fixed it. 4 days later we had to do it again. What causes this gunk and why so fast?
That’s unusual to have it that fast again. Does he use it in eco mode? If so try it without and make sure yoy get it all out cleaning it from the backside if it’s truly dirty it’s going to be some tough hard carbon on the backside that will take some elbow grease to scrub away
Cleaned it again. Got better for a couple days. It’s back to shifting hard when he accelerates. Any suggestions?
Very strange have you done a tune up? Spark plugs etc?
i drive a 2012 hyundai elantra and i took a 7 hour drive yesterday. drives fine this morning but starts acting up when it’s time to go to work. my RPM’s are shooting high at low speeds. can’t even drive it around the block and ion know what to search on how to fix it or even what to search to figure out why it’s driving like that.
Clean your throttle body
My 2013 Hyundai Elantra has a start button. What's the re-learn procedure?
I’m here trying to learn it too! I don’t know how to email him from RUclips
Yusinp@gmail.com
@@YusinPonsMinistry press the start stop button 2 times without pressing the brake pedal.... wait 10 full seconds then turn off for atleast 10 seconds ... also If this helps let me know. Like and subscribe and feel free to click my amazon affiliate link in the description you can purchase anything you might normally get or plan to get and that will help me out. Thanks again
Brother brother how to do throtle body relearn procedure
The car is new I should not have this problem I'm sorry 😔 I expect older cars to have issues
Dealer replaced ignition coil today. Hope that solves engine shuddering.
Did it solve it?
I remember doing this on my 16 Elantra. Biggest piece of shit ive ever owned
I have a 2015 Elantra with 90,000 miles and it will stall at stop lights, stop signs and in traffic. It happens after 10 minutes or so of driving, when my car is warm. The vehicle starts right back up with no issues. I replaced my battery, (tested bad) alternator (bad barrings) and spark plugs however the problem is still occuring. Before replacing the alternator I was getting a low voltage reading and now I am not. I have checked the fuel pressure, values and listened to the fuel pump which all sound normal. All my fuses are good and lines. I have NEVER had a check engine light on or thrown a code. I was told to replace my fuel filter. PLEASE HELP Thank you so much
Just like my video CLEAN the throttle body. It’s full of black stuff behind the butterfly
@@BrandonActionJackson p0016
My 2017 has occasionally a rough idle , did kick misfire on number 2 cylinder replaces coil stop the problem for. While now it’s rough idling occasionally but not kicking out any codes?
Clean throttle body
Is the relearn procedure the same for the 2015 Elantra? We did this and the idle seems better, but now check engine light came in and gas pedal doesn’t cause acceleration. Some weird computer thing?
Yes same procedure on 2015. Are you sure you cleaned it good and got all of the carbon from behind the butterfly?
What is the normal rpm when you start a sonata 2013 limited?
Not sure of the exact number but what is your concern are you afraid it’s high? Low?
Was there anything about the compressor from the A/C? I haven’t done this video yet, but I do have a 2013 Electra push to start.
John Gutierrez nothing to do with the compressor even though you will notice the car surges more when the ac compressor is running
BrandonAction Jackson thanks! I noticed that it did, but I’m going to try your advice and get working on what you said. I just started having this issue today and not going to lie, I feel like my Hyundai was a bad buy.
John Gutierrez it’s a cheap car... my wife bought it and I won’t own another... but the reality is that this is a very minor problem it just took a lot of effort for me to solve it but it’s very simple overall I don’t hate the car for the problems as much as I do the terms under which she purchased it
BrandonAction Jackson I forgot to ask about the instructions for resetting the throttle body code for a push to start. Can you send me the link?? Thanks!
@@BrandonActionJackson can you please advice me for keyless huyandi elentra 2012
Hey I have the push start
Thanks
Very helpful thumbs ub
Was this if it was sitting longer than 12hrs? Mine does this !
Yes if you want a solution then you should probably clean your throttle body
@@BrandonActionJackson thanks for the video. My brother is coming tomorrow to clean it for me.
@@thedandyone6546 well did it help??
@@jonscears yes that was the problem thanks for the video. Sorry for not getting back with a update
Me still waiting to see how he solved the problem...
Is there gasket between the throttle body and intake if so do I need to replace it if i remove the tb? Thanks in advance
There is an o ring that fits in a slot just make sure the surface that presses against it is clean and make sure the o ring doesn’t find out. Also make sure the surface of the o ring is clean before you press against it
@@BrandonActionJackson thank you very helpful idling smooth now whats relearn on these thread mean?
ill never buy hyundai again they are annoying junk go with honda
Good afternoon my name is Patricia and I have a 2015 Hyundai Senada I’m having the same situation with the joking when I stop or even when I’m driving
I’d say this could be the problem
How do I correct it
@@patriciagallimore9256 watch the video and the solution video but it’s going to be different than an Elantra to an extent
@@BrandonActionJackson how do I correct it
@@patriciagallimore9256 I would say clean your throttle body
I have gone from not knowing how to change my own oil (no father in the home to teach me) to replacing head gaskets and brake lines because of total studs like you. thanks a million.
I am not so mechanically, so I wished you would have shown how to actually remove that part to clean. But the information was well taken! I will give it a try...Thanks!
There's like 200 5 minute videos on how to remove the throttle, none of them show how to do the relearn procedure in the last 10 seconds of the video.
@@Godzilla20168 please help me out of this problem
or just get some B-12 Chemtool Carburetor, Choke & Throttle Body Cleaner at Autozone and just leave everything intact and follow the directions on the can (spraying it into the air intake while the engine is idling)
For all of those people out there who are scare of working and cleaning the throttle body, do it! You can do it! I was freaking scared to the point that I was throwing up due to how scared I was of doing something wrong but I was able to fixed it on my 2018 Corolla LE. Thanks for this video!
I went to the mechanics 5 days ago. Mechanics changed my cars engine fuel and then washed my car, and after few hours, my car stopped gaining the exact speed.. the same mechanics told me to buy catalytic converter which is for $1500 to $1700... I believe that while washing the car and changing the engine oil, they made a defect in my car intentionally...now when my car is neutral, it uses 1 gallon in almost 15 20 mins....can anyone suggest
BrandonAction Jackson Thank you for the solution to my 2012 Hyundai Elantra Limited!!! Everything you described falls under my car's symptoms. Also can you send me the link for the relearn method for a push start Elantra. Thanks a million bro!!!
Phillip Washington press the start stop button 2 times without pressing the brake pedal.... wait 10 full seconds then turn off for atleast 10 seconds ... also If this helps let me know. Like and subscribe and feel free to click my amazon affiliate link in the description you can purchase anything you might normally get or plan to get and that will help me out. Thanks again
Friend, I reset the electronic sensor of the accelerator pedal with my scanner, I finished the process, I started the car and the rpm was blocked, they were super unstable, I didn't know what to do, I was very worried, my car was not accelerating, until I magically came across your video and The question of opening the switch for 10 seconds and closing it for 10 seconds was magically reprogrammed, you saved my night I love you ❤️
I went to the mechanics 5 days ago. Mechanics changed my cars engine fuel and then washed my car, and after few hours, my car stopped gaining the exact speed.. the same mechanics told me to buy catalytic converter which is for $1500 to $1700... I believe that while washing the car and changing the engine oil, they made a defect in my car intentionally...now when my car is neutral, it uses 1 gallon in almost 15 20 mins....can anyone suggest
How do you do a throttle relearn for a push button start?
The song at the beginning had me dying laughing
Brandon Jackson, can you please help me out with my 2014 hyundai elantra. I've had this problem for a very long time now, the engine's rpm fluctuate below 1000 rpm at idle speeds or idling, and stalls when car slows down idle speed whiles driving. Please help me out with a solution if there's any.. Thanks.
Clean throttle body.
Lol you were jamming 🤣😂🤣 the music
My sons 2012 Elantra had same issues. First it threw a code for crank sensor which didn’t fix it. Then it threw a code for MAP sensor. We cleaned throttle body and it slightly improved. Finally saw a video for the purge control valve on an Accent. That fixed the problem immediately. It was stuck open. Hyundai part# 28910-2E000. Part was $34 at my local dealership.
Valve usually stuck open because fuel tank was overfilled and gas ran down the fumes only tube into the purge valve causing it to malfunction. NEVER top off your fuel tank. When the pump automatically shuts off don't try to round off to the nearest dollar.
what does "threw a code" mean? pardon my car ignorance
@@Raphi when you hook up a OBDII scanner to your car you can pull the error codes the engine might "throw" when something is wrong... only indicator on the dash might be a check engine light but that doesn't always light up for all codes
@@SadComicLaughs Thanks very much!
My car idles rough and sometimes below 6k when ac or any power even radio turns on and off. How much do you think a mechanic will charge if I dont want to do this myself?
I have cleaned the throttle body. It seems like there is still a slight line of carbon. I used a toothbrush and scrub pad and nothing else comes off. It seems flush but the issues are still occurring. Not sure what I should do now?
throttle body is one of several parts for all of these types of issues he eluded to with cam sensors, also map sensor, spark plugs, spark plug coils, O2 sensors, air filter, the PCV... so could be a few more things
I think this is the issue I’m having right now! But mine Hyundai is a push start. Do you mind to give your email or either answer this comment section to know how to do the throttle body thing?
COULD YOU INDICATE THE PROCEDURE FOR ELANTRA 2016 WITH PUSH BUTTON, THANK YOU
Thank you!! Same issue in a Hyundai Elantra 2015 GLS Mexican version, wish I'd have found this video 2 years ago, not even in the 6 months service by the dealer were able to fix it.
Hello im looking for your email so I can learn the push start method please
My wife’s 2016 KIA Forte had the same issues. It would stall after starting when it was cold sometimes. Found out it was the throttle body that was dirty. Was cleaned and car acts better now. Same identical motor.
New throttle body installed and still have this fk problem.... new crankshaft possition sensor, new coils, new sparkplugs gaped to .28, new PCV valve, new EVAP valve, new canister, new gas cap, dude nothing solve this problem............. btw my car ius a hyundai veloster turbo 2013....
I do have 2013 Hyundai Elantra with the same issue no engine light at all the problem was rpm on my car suddenly changed to very low speed on the road was 20 per miles the mileage on my car about 148000000 I didn’t change any sensor what I did I change throttle valve boy and PCV that all I did my car worked perfectly 😊😊😊😊
I tried on a 2015 Elantra 1.8, and there is a red o-ring on the intake manifold where the TB connects, and there appeared to be a remnant of a black gasket/ring/or some sort of RTV on the back of the TB. I cleaned it, but didn’t seem to fix the problem. Was the black ring actually a ring like gasket? Mine looks like it might have been peeled off
Matthew Fultz these was an actual o ring behind the throttle body that sat inside a slot. How well did you clean it? Your throttle body should be completely clean no black reminants inside the throttle body
I did the same thing to my 2013 Elantra and it took care of the problem. The dealer was going to charge me $200 but I did it for $5
Great always good to save that money. They beat around a lot to and try other things prior at times
@@BrandonActionJackson May I please get some help I have a 2014 Hyundai eletar and it won’t start noting please help
@@jlijahgarcia3307 not much I can help with really If I don’t know what it’s doing. Is the battery dead? Are the connections loose? Did it have a check engine light before hand?
@@BrandonActionJackson it’s like everyone else for me to drive it I got hold on the gas when I come to a stop it stops and I got hold on the gas to make it drive agian
I have the same problem, but only when its 0 degrees, and raining. It starts but sputters and rpm fluctuates low .If I touch gas pedal, rpm rises to almost 2000 rpm .For cold mornings which is normal.Dealer mechanic changed everything like you said in your video. But the problem came back also
How do I contact for the instructions of throttle body re-learn procedure for a push to start?
I need as well. Lmk if you find
Can u help me with my car start button
Gonna try this later 🤞
Omg it worked thank u so much.
My mom's car is dying at slow speeds, about 12-15 mph if you hold the gas pedal down/rpm's at 1,100 RPM. So, if you're almost coasting and barely pushing on the gas it'll die/stall. Can these cause that? She has the push button start, could you email me the re-learn procedure for push-button? I'll try to find your email here in a minute....my email may go to your junk filter so please check the junk filter, my email address is numbers/letters so it's gets thrown out a lot.
Change crunk sensor
Thank you so much. This was exactly the problem iv been trying to track down! Fixed instantly
I went to the mechanics 5 days ago. Mechanics changed my cars engine fuel and then washed my car, and after few hours, my car stopped gaining the exact speed.. the same mechanics told me to buy catalytic converter which is for $1500 to $1700... I believe that while washing the car and changing the engine oil, they made a defect in my car intentionally...now when my car is neutral, it uses 1 gallon in almost 15 20 mins....can anyone suggest
I have one that starts hard, then wants to stall when you come to a stop, or sometimes just from getting off the gas. It will start back up, but it wants to stall at idle.
Had the same problem a year ago, I replaced the fuel pump and it was fine. I replaced the fuel pump again a few days ago, but this time no effect. Engine light on, throws map code. Throttle body was clean. New plugs, insulated the fuel line. idk what to do now.
Clean throttle body mine also through map code during this
I find this out awhile back once you clean the throttle body. You will need to take it to someone or buy a scan tool that can reset the adaptive values after cleaning the throttle body.
@@micahhill4786 To clear the adaptives you pull the battery cable for 10 mins, so al the residual charge bleeds off the capacitors, this will clear your adaptives when a scan tool is not around. Also clears DCT adaptive too.
In the future the reason you should take it off to do it is so you do not drop anything down in the opening. It's also to make sure you don't over spray cleaner in there. Tip: NEVER guarantee it will fix anything...trust me.
I have that issue that my brakes become hard and can't break. I put the car in parking after using emergency brakes and the rim goes to 4 to5 000 and im not even touching the gas and brakes just stay hard. Turn car off once or twice and goes away idk if it's the senor of throttle or throttle is clogged or dirty
Need help with a push start 2016 Hyundai Elantra limited
Did plugs, throttle body, and coils.
I just did this to my vehicle and after 5 minutes of driving it turn on the check engine light, Which it never had on. Can you help tell me why it went on and how I could turn it off?
hello, my car started this issue after few things,
oil change , oil filter change, air filter change and running car on higher
Hi thanks for the info,how can i relearn procedure in a push start model?
Hi there I’m unable to get the link at the moment. Scroll down the comments and see a Phillip Washington. I wrote out the relearn procedure in a reply to him. I’m on a mobile app and can not copy and paste it to you. Hope this helps. Thanks please subscribe to my channel and give this video a thumbs up
Cam shaft sensor code gets thrown for every car issue....man I had a cat converter issue with a different car
I have surging rpms when i turn the air on it works for that too?
It can potentially work
Will this procedure work on a 2006 Hyundai Tucson 2.7 ? Is there a relearn procedure for the 2006?
Hey Brandon will this work for a 2012??
Yes
Sounds like me car problem. Thank you, I'm gonna try to do it to me car.
I’m having these same EXACT problems I’m hoping this works! My check engine light is on but its telling me MAP and IAT sensors if ANYBODY could help I would gladly appreciate it.
I had the map sensor code but it didn’t fix the problem.
Okay I’m cleaning the throttle body right now , thanks for the Vid btw I will update you on if it resolves my problem or not.
@@nach0512 did it work?
What causes the engine to vibrate when the rpm is installed at 1500 rpm in a 2009 Sonata while parking, although I have checked it with the devices many times and I have not found a solution and sometimes it has double torque while driving.. Almost at a speed of 80 km
I have a problem My car when I start the rmp keep sleepy Same tyms wk
Hey I have a 2013 Hyundai Tucson Limited 2.4 and mine is doin pretty much the same thing except for mine is doin a intermittent start and occasionally getting off the interstate will run really rough like a dead cylinder and die and mine also threw a code for the map sensor P0106 replaced a map sensor and spark plugs seems to be running a little rough but not really surging and is also pushbutton start and with it doing the intermittent start spins over but won’t crank if you press the button again to stop it and then press it to start it again it fires right up Any thoughts?
My grampa has a 2015 elantra and you need a new battery or oil
Changing that hose doesn’t fix the fluttering in a 2014
You showed nothing! Just theoretical talk.
I have cleaned my throttle body for the second time and my car is doing EXACTLY this with no codes warning/engine lights been going on for almost 6 months! 4 mechanics later including the dealer who had my car for 4 full days and still NO ANSWERS to want my problem is or how to fix it!!! What is the relearn procedure for a push start Hyundai Elantra?
Did you solve the problem?? I'm having the same issue, cleaned the throttle body, changed pov valve, map sensor, spark plugs, ignition coils, then I decided to change the throttle body and install a new one, and nothing. Now it threw a P0106 code for the MAP sensor, but l installed a new one. Idk what else to do
Is this issue part of P0731 code?
Great video thank you
Awesome information&tutorial