Mechanical computer. Homemade Gear Cutter. Making gears for future project
HTML-код
- Опубликовано: 28 сен 2024
- In this video, I am making two gears for my future project on a homemade gear cutting machine. gear sizes 16mm x 18 teeth. the second is larger 25.6mm by 30 teeth. module 0.8. do not judge strictly for the quality of the gears, they are not perfect. But for a machine of such a small size, assembled from trash in two evenings, it is quite normal. perfect for my future project. soon you will see it. for the manufacture of these gears, a new dividing disk had to be made, which did not take much time. in general, see the result in this video.
Friends, if you like my work, please support the channel, subscribe. Like and share this video with your friends. Many thanks to all for the support. There are many interesting things ahead.
I made these gears for this project • How to make Mini Hand ...
See how I made this machine • DIY Gear Cutter. Mini ...
Hướng dẫn cách thức đấu điện đi bạn mình rất thích video của bạn ❤❤❤❤❤
Good
Thanks a lot
Excellent! May I know the DC motor rating? Will it get hot?
Thank you. it's a screwdriver motor
Im amazed at your skills and engineering. This would be perfect for model train gear making.
Thanks mate, glad you like it
my brother, I watch this video every day, I don't know how to do the same, can you help me, thank you❤❤❤
Qui. Ero. Las. Medidas. Porfabor
The machine is very cool, especially when you consider that it is automatic!
Thanks buddy. That's exactly what I thought, a mechanical computer on a punched card
Gear bevel oc
45 degrees
fantastic! simple and effective machine, great job!
Thanks a lot
I am very impressed with your ability to create your gear cutting machine and I will subscribe so that I can view how your agile mind copes with other engineering problems.
If ,as you say you are happy with the product your machine produces then read no further. If on the other hand you will allow me to suggest possible improvements, please read on.
I am going to use the terms 'Accuracy' and 'Precision' . These terms are often used as alternatives but I will use them as they are used in Metrology where they are not interchangeable. Accuracy means how closely the product dimension fits within the stated tolerances and Precision means how well a process can be repeated. For example ten shots in the Gold is both accurate and precise whereas the same grouping on the outer edge is precise but inaccurate.
Firstly your index plate is an excellent alternative to purchasing an expensive 'off the shelf item' and can produce precise angular movement. An improvement I would suggest is to drill using a centre drill with a depth stop which will give your detent the ability to locate with precision. Angling the detent to match the angle on the centre drill will assist.
Because you are using your eye and skill to position, firstly the centre punch and then the drill, you are inviting errors in accuracy on your index plate. A difficult problem to overcome. My suggestion would be to investigate in your environment what manufactured 'gears' you can find (broken toys come to mind) that your use to engineer your indexing plate from. Turn your machine on it's head and work backwards to get holes fixed from an accurate source.
Another source of inaccuracy when drilling holes is the drill itself. I once bought a set of drills because they were cheap, when I inspected them they had all been ground so the cutting edges were different lengths. They wandered about on their centre and cut oversize.
All the above is added in the hope that it will help you in fantastic endeavours, keep it going.
Thanks a lot. I hope I won't let you down
Gran trabajo!!!
Thanks a lot
Что то с заточкой фрезы, вроде не должно так рвать)
Думаю причина в жесткости. на маленькой шестеренке получилось лучше. на большой похуже там рычаг больше по этому наверно
@@serengytech да в какой то момент видно выгибается что то при фрезеровке , но вообщем идея то суперская
@@basilstadnik1342 Спасибо. для моих нужд пока достаточно. меня в основном эти два типа шестеренок интересуют. на самом деле выход есть. нужно уменьшить модуль до 0.5. тогда нагрузка в разы сократиться
@@serengytech
А подачу уменьшить? Никак?
by the way, where did you get the material, thanks❤❤❤
What material are you interested in?
@@serengytech i want to build an armored car so i need gear❤️❤️❤️