How to change the impeller on a Billy Goat Leaf vacuum

[@bookemdano1317]

38 doesn't seem like a lot, but the impeller will turn against the bolt and tighten it more.

[@vongtaynhanaikptt6066]

Thank you for sharing this video and I am showing you my support and nice video

[@Turningwrenches85]

U wouldn't think an impeller like that would have that much damage on it. Good video boneyard 👍

[@amend5269]

Since the old ones scrap could you weld square stock to the fan to give the puller grip?

[@lawdawg1942]

Have you worked on the echo bear cat leaf vacuum? If so which one seems better built?

[@BensWorkshop]

Nice work. The old impeller is seriously damaged. Wow.

[@firstname6208]

it seems the piranha blade is bent the opposite way, the ripper teeth are not on the leading edge but on the trailing edge.
I find it hard to believe the blower can move as much as it does. farm blowers that could lift tons of sileage 75 feet vertical were made much tighter clearances. the fan to band clearance was pick up a nickel, leave a dime.

[@tombradke7157]

great video. Very helpful. do you have a video on changing the drive belt for a BILLY GOAT KV600SP

[@boneyardgaragesmallenginer188]

Glad I could help. I don’t have a video on a billy Goat but that would be a good video to put out there.
Thanks for watching! 👍🏻

[@leomeilak6532]

Thanks, very helpful

[@boneyardgaragesmallenginer188]

Thanks for watching 👍🏻

[@joeo1352]

Nice job 👍

[@dannydunnagan3267]

Nice job I bet that billy goat will tare up some leaves.

[@lowellthomas197]

What model number is that sucker?

[@WhoIsJohnGaltt]

Hey would it be possible for you to do a video on how to change its oil. I looked up the manual and it doesn’t say anything about how to properly do it

[@boneyardgaragesmallenginer188]

Next time I get one in the shop, I will do a oil change on it. Thanks for watching.

[@WhoIsJohnGaltt]

@@boneyardgaragesmallenginer188 np, good video

[@colin_5839]

Very nice!

[@Mowing4money]

I have that exact model I can’t get my gas tank to stop swelling tried a new gas cap that didn’t work

[@thethirstymoose]

I have a kd50..need a new motor, any idea what new motor might work with it

[@boneyardgaragesmallenginer188]

I have use the predator harbor, freight engine the big two cylinder one and it worked fine.
Thanks for watching 👍🏻

[@thethirstymoose]

I'll need it to match up with a new impeller

[@thebrokeway9838]

Hello Sir thanks for the video..Do you believe the same method will work for the powermate 212 WBB?? Thanks

[@boneyardgaragesmallenginer188]

It should it’s basically the same method.
Thanks for watching!

[@thebrokeway9838]

@@boneyardgaragesmallenginer188 ok thanks I going to get the tool right now

[@ctlandscapemaintenancesolu494]

wow how many hours before it starts looking like that

[@boneyardgaragesmallenginer188]

I’m not sure but I think my customer had it for about five years.
Thanks for watching!

[@dillondewayneforinger6986]

I ordered a new impeller the other day cause mine is twice as worn down

[@boneyardgaragesmallenginer188]

Thanks for watching

[@dillondewayneforinger6986]

@@boneyardgaragesmallenginer188 do you know if the liner fits both the 14hp and the 18hp? I don’t wanna buy the wrong one if I replace it

[@doejon6821]

shit …..my Fraden 31 hp Must need a new liner and the impeller definitely could be changed out. it didn’t have the big chips in it but the edges were starting to curl. That’s from jobs with a lot of rocks. it’s crazy that fall is generally six or seven weeks …… say I do seven to 10 jobs a day….. say 10 to 15 minutes of sucking each job? Roughly an hour and a half or two hours of that thing going nonstop per day. Let’s just call it two hours, times that by six days that’s 12 hours a week, 12 hrs x 7 weeks= 84 hours a season--I got it in 2016 so 84hrs x 7 years= 588 hours… So let’s just say it needs to be changed after 600 hours lol…… Less if all your accounts are sweet with no rocks