I have a story I wish to share that does not relate to the main point of this video and is relevant only tangentially to one part, but I think that people who watch Sabine’s channel might be glad to hear it. It concerns flywheel energy storage. I used to work at a facility in the northern US which had undervoltage release mechanisms, meaning that whenever the incoming grid voltage dipped below a certain value even for a moment, as was often the case when a thunderstorm came through the area, the system would shut down. If that happened, it would take as long as an hour to restore the system to operation. Later, while still with the same company, I moved to a similar facility located in Florida, the thunderstorm capital of the US. Before moving there, I thought to myself, “Oh boy, that facility is going to have a lot of interruptions.” Fortunately, the facility designers though of that and they included a flywheel UPS (uninterruptible power supply). The way it works is that the incoming grid power does not directly power the equipment. Rather it is used to power an electric motor which drives a shaft that 1) rotates a flywheel, and 2) rotates the rotor of a secondary generator that actually does provide the power to the equipment. The benefits of this system are twofold. First, the output of the secondary generator is much “cleaner” than the incoming grid power, meaning the output THD (total harmonic distortion) is much lower than the incoming THD. Second, and more germane to the topic at hand, if the incoming grid voltage does momentarily dip below the acceptable level, the energy stored in the flywheel is sufficient to drive the secondary generator through that dip and no undervoltage releases are tripped. In fact, in the worst-case scenario of a total blackout, the energy stored in that flywheel is sufficient to drive the secondary generator until the on-site backup Diesel generators kick in. If you read through my comment so far I want to thank you for letting me nerd out.
With a conventional fossil fuel grid the implicit flywheel storage of all the moving machinery in the power stations is quite significant and does a good job of stabilising short term fluctuations. I hadn't heard of a flwheel UPS - nice solution to the problem.
I first saw this setup at a data center in South Florida. The reliability engineering was impressive. They had multiple power lines from independent substations feeding their very large flywheel UPSes, which I was able to see. They also had contracts with fuel vendors to provide continual supply to their generators...even by helicopter, if I recall correctly. And all that was over 15 years ago!
@@andrewharrison8436 Quite right, In England in 2019 Two large power stations, Hornsea One Ltd (co-owned by Orsted)(wind) and Little Barford (operated by RWE) (gas) did not remain connected after a lightning strike, local power fluctuations tripped most of Network Rail South East and the public network. Took about 6 hours to restore power. Lack of short term frequency resilience usually provided by rotating generators was a major contributor. UK is claiming some days have 50% + green energy production which does not have the resilence provided by rotating machinery.
The differential equations for storing kinetic energy as rotation in a flywheel are of identical form to those for storing magnetic energy as current in an inductor. Once you spin them up it’s hard to get them to stop and if you try to stop them instantly the force builds up explosively. It’s only natural they compliment each other when they act so similarly.
I live in a country with a small energy grid, only 50.000 people (faroe Islands) with no cables to other countries to buy or sell electricity. We are building a pumped storage plant where we use excess power from windmills to pump water from one Lake to another. They estimate a yearly production of 60 GWh/year when finished. I think this is a good solution for us. A nuclear powerplant would be too big, I think for such an isolated and small country this is optimal🤷🏻♂️🇫🇴💪🏻.
A small modular reactor might work for you if you needed it, but sounds like you won't; you've got the lakes and wind is probably pretty reliable for you... at the moment 😕
@Wonderin'Aloud I took Sabine’s suggestion to share the conditions in my area to illustrate that different solutions are best for different places. Sorry to have wasted your time, first reading my irrelevant comment and then for you writing a reply..
So they're thinking to use the windmill's power to pump the water to a higher elevation when the wind is blowing, and then use the higher elevation water to run hydroelectric generators when it's not blowing? Is that right? That's actually not a bad idea. I mean, there's an enormous number of losses in that process, but they really shouldn't matter, much, because at least you're storing the energy in some way that won't wear out in 7 years, like batteries. (I understand the piping and pumps and reservoirs would have to be maintained, but it's still not a bad idea.) What does your island use, now? Diesel generators where they bring the diesel in on ships? I guess maybe LNG with the same generators would also work, so you'd have two sources of fuel. 50,000 people uses, maybe, what? 250MW at peak times? This would be interesting to follow to see how their plan with the reservoirs works.
Sabine, you are considering cost of production and supply from the power plant. Distribution to residential power outlets is by far the largest financial cost. In California, for every 3 cents of power production at plant, we spend 21 cents in distribution. Even if nuclear costs 2 cents to produce, it still costs 23 cents to buy in California, as compared to 24 from coal. However, when we use lithium batteries, the distribution cost is negative to individual consumer. The net cost of electricity comes down to minus 2 cents. Marginal cost is even lower at -6 cent a unit.
The beauty of your videos is the clear, concise way you give information and the (not so) subtle way you express your opinion on something. No pie in the sky dreams. Just reality and what can be.
Long time metalhead, first time commenter: the heavy metal umlaut works best if the word *doesn't* originally have umlauts. Motor doesn't have an umlaut, nor does motley. Or spinal, for that matter. "It's like a pair of eyes, you're looking at the umlaut and it's looking at you." Cöld Dünkelflaute totally works.
Nuclear is not an option because it creates waste and is always a risk, particularly if there is a war, cough cough Ukraine, cough cough. The Spanish have come up with a solution Make jet fuel from electricity, water, carbon dioxide and sunlight. The jet fuel could be used to drive generators when power is needed.
@@PWBERRETT The Spanish solution you speak of produced about a liter of jet fuel per day. Do you think this will be enough to fly even an ultralight plane?
I have been re-educating myself this last decade, and during this time I have found you on various platforms. I'm international, thus understanding many cultures, disciplines, sciences....and here express my gratitude to you for taking the time to expand my knowledge with a humor I have not often encountered. Vielen Dank, for giving freely. 👍😎
I enjoyed your analysis. And many thanks for the useful information. I have achieved 100% energy independence over 2 years ago. I am now on full Offgrid solar, disconnected from the power grid and the system is self sustainable, enduring the challenges with rainy, cloudy cold winter without issues. My energy storage solution relies on LFP batteries. The key towards achieving a working solution is to plan your capacity based on the worst case scenario. This means not just oversizing the solar, the battery capacity, but more importantly optimise how fast you can charge your batteries. In our solution, we utilise 120Ah LFP batteries that are capable of accepting a 1C charge (120A) and providing 2C (240A) discharge. If you connect these in parallel, 10x of these will be capable of accepting 1200A charging current. In our setup, we have 16x of these, providing a theoretical 1920A max charging current at 14.2V. But in real life, dealing with such high current puts extreme demands on busbars and cables. Based on current technology, my setup is based on the Victron Lynx, which has a 1000A busbar system. The batteries are grouped into 4x groups of 4x, essentially 4x parallel battery banks, to split the current load. Each battery bank is serviced by a 500A flexible busbars. So if you combine these 4x you still get around 2000A. By having a very capable busbar system, the high current conductors run cold and efficient. We have independent temperature sensors on all 4x busbars system to monitor. This extraordinary high current capability allows the deployment of multiple Victron SmartSolar units (we have 8x in this setup), each capturing solar energy for strategic groups of solar panels, which are placed/angled specifically to capture solar energy during a specific time of day and season, factoring the change of incident angle over the year and season. With a high multi-zone solar capturing setup, we don't need complicated solar tracking. The solar energy is captured efficiently by each group over the day without creating a single peak in the output, instead it provides a sustained output plateau we are aiming after. And due to the very high current capability of the busbars, there is no throttling required by the solar controller. Although we have set DVCC, it never engages. This means whatever short bursts of sun or cloudy diffused solar we get, we can totally capture these. This is important factor in winter survival for solar set-up. And we deployed Solar panels with the highest efficiency, the Sunpower Maxeon 3 400w panels, 16x of these. They perform extremely well even under cloudy and rainy conditions. And surprisingly, in winter as the temperature drops, the output voltage actually increases. You get more power in colder temperatures. And cloudy days does not necessarily means lower output. Actually under diffused sun you can still get pretty decent output, factoring the lower temperatures. And they go on for longer hours in diffused sunlight. Based on our observations, our LFP efficiency is not bad at all as we tracked the energy we put into the battery and the energy we get out. LFP has an energy efficiency around 96 to 99%. We are seeing the 99%, which is pretty impressive. We only have a enter minimal compensation factor in the Victron BMS controller. And we only cycle our batteries between the 70% and 100% SOC. Leaving a high margin for contingency. This further increases the lifespan of the LFP battery as we are utilising shallow Depth of discharge. Just as general guideline, on the worst days with crappy stormy weather, we get around 1/5 or 20% of the max daily average power. In winter, with slight rain, typically this is more like 30%. On cloudy days, this is around 50%. So if you plan and build according to the worst case 20%, a 5x oversizing (on both panels and battery) is probably the safer bet for a more robust solar power system with LFP storage. 😇👍 This means the design guidelines should be based on the worst weather, to ensure your solar panels should still be able to bring in sufficient power to cover your minimum energy needs. And obviously this value would be different for everyone and different regional climate. I run our ebikes and e-scooters off our Offgrid solar. And the ebike combined with the escooter covers 99% of our travel needs. So i hardly ever use my car that has a petrol engine these days. It has been put on solar charger to maintain it's battery health 🔋😂 And i strongly believe if everyone makes a concious effort, they are capable of making a significant reduction on their carbon footprint. We have proven that this is perfectly possible. And it's not like i don't have to travel far to be able to have a ebike as a viable commuting option. I still need to cover 60kms on my ebike travelling round trip to /from work. But surprisingly this doesn't take much longer than the public transport or even car when factoring traffic conditions. It takes me just under an hour to cover my 30km trip. So it is not like ebike solution is time consuming. On the contrary we would say it is not only as time efficient as public transport but way healthier solution. 😉👍
_>I have achieved 100% energy independence_ _>My energy storage solution relies on LFP batteries._ I find it amusing that you think EUSSR government goons can't blow up your batteries at any time.
@@mdjey2 I am afraid that is not correct. The body of a newborn is app. 70% water, but after incorporating so much science as Sabine, it drops to 60%. Some claim that to be an effect of aging, but I would of course never discuss a Ladys age.
Thanks! It's good to see some _real_ estimates on how large this problem is (and the pros and cons of the solutions), and not just the handwaving I normally encounter.
IMO, it is a great to hear Sabine conclude that nuclear power "is a really good idea". The entire program to end nuclear power in Germany should be a case study in governmental malfeasance. Recent polls seem to indicate the German public is now more favorably disposed to nuclear power than before the Ukraine war recapitulated certain eternal truths. However, the government apparently is still clinging desperately to the hope that wind and solar are the answer to the energy problem, and climate change mitigation, if only the storage problem were solved. It seems that abundant nuclear power from new designs would make the scramble for an energy storage solution much less relevant.
There is two things misleading in this video: 1. Renewable energy is such a small portion of the whole energy mix and the same for energy storage, BECAUSE most energy comes from fossile fuels. Renewables are not bad, but existing energy networks are made for constant Power supply aka fossiles. 2. Nuclear energy has a really high energy yield. Yes. But please, tell us the solution to how to store the waste for the next billions of years, instead of completely leaving out this part of the discussion.
@@seppwurzel8212 I don't think either of those things were misleading at all. In particular, the nuclear waste issue is one of the most overblown scaremonger tactics deployed against it. It's really not that difficult to dig a deep hole below the water table, load in the waste, then cover it up. Norway is already doing it. It seems difficult here in America because of politics, not technical issues. Further, even that isn't really necessary. Nuclear waste is SO SMALL by volume that storing it onsite in dry casks (as is being done today) is actually perfectly safe and viable. Even better would be to reprocess it and reuse the fuel because modern nuclear reactors are so inefficient that they only use a small amount of the available power. Next gen designs leave behind fuel that is much more thoroughly consumed and is less than 1% of the already small volume currently produced AND most of the nasty long-lived stuff is consumed. There's also a reprocessing step for the existing fuel that can allow it to be reused for newer gen reactors once they're online. It's not super-economical yet as I understand it, but it could make onsite storage make sense as this stuff could be reused while the stuff that's been buried might be gone forever if it's already been filled in. If you spent all day hugging a nuclear power plant, you would get less radiation than taking a airplane trip.
@@brianmulholland2467 And then there are the newer Molten Salt Reactor designs that are immune to the dangerous catastrophic failures like we've seen with the old style water cooled reactors. (see Chernobyl) Also, if we use Thorium instead of Uranium, then we have enough "fuel" on hand to power the earth for thousands of years.
Liquid air storage has a potential bottleneck when it comes to re-expansion. I was a facility manager for a semiconductor tool manufacturer that used a lot of LN2. We were constantly fighting to keep the heat exchangers de-iced to keep up the N2 flow. For something like energy storage, this is a non-trivial concern. You'd need a LOT of heat exchanger surface to keep the pressure up.
From what I remember of Highview Powers liquid air battery is that they capture also some heat. When you liquefy air, you need to dump heat somewhere and if you capture the heat, you can then re-use it to expand the LOX and LN2. The process is naturally always going to produce more heat, so in theory you never have a shortage of energy to drive the expansion, if you can store the thermal energy properly. That is essentially the challenge of liquid air energy storage.
Thank you Sabine for yet another informative video. If pressed I would have guessed that a Dunkelflaute was a musical instrument with a deep bass sound. Something like a bassoon.
I think flywheel storage would be good for at charging stations. Those flywheels can send out a lot of power quickly and keep on cycling all day every day for decades without issues. Batteries work too but they dont have the same cycle life as a flywheel.
Thanks! Sabine, this is why I watch your channel. Most of what you talked about I was at least familiar with, but "pumped hydro" as a source of stored energy (as opposed to maintaining consistent water pressure for a city's water supply (which I know, is technically stored potential energy... but... you know what I mean)) was completely new to me. Keep up the awesome work.
it's pretty much the oldest form of energy storage. it's generally build high up in the mountains (look at Kölnbrein Dam or Kaprun for instance), so looking pretty differently to like a traditional water tower (which really couldn't hold much potential energy because of how small and close to the ground it is). in Austria, you get thought about it in elementary school even back in the seventies. (that's how I became familiar with this type of energy storage)
CO2 is a ruse. Climate change the "Greens" are talking about is caused by changes in the cosmic-rays/solar-activity relationship and cloud formation (See the work of Henrik Svensmark.) Cloud formation by actual cosmic rays can be scene with the naked eye in Cloud Chamber demonstrations. RUclips has dozens of videos about them....
@@SabineHossenfelder I like humor about silly ideas too but shouldn't good storage humor come with some facts about the best solution to the energy problem - namely fast reactors? With fast reactors, there's no need for wasteful energy storage. Fast reactors are by themselves storage because they can deliver energy in a market where demand fluctuates from minute to minute. The fuel is also the most renewable that exists. There's enough uranium 238 for the whole world long after the earth is no longer inhabitable, ten billion years into the future. Fast reactors also offer to burn all the radioactive material leaving no waste. What is silly Germany waiting for? The green lunatics to take control over the country? Why are you not making yourself the spokesperson for fast reactors being the primary energy source? If not you, who?
@@SabineHossenfelder This video is great, and geeky humor helps in delivering complex facts! What I like the most is that it is hints at more favorable evaluation of why Nuclear Power is so compelling comparing to previous "is nuclear green", which showed "glass is half empty" view, with several questionable sources. Scientists do evaluate facts and also change minds! In the energy storage field there are many startups, ideas that are very controversial. For example Gravity energy storage (the concrete block towers) shown in video is most certainly scam aimed at exciting investors. It is not exactly "theranos" kind of thing, because science of E=mgh is clear cut, but impracticality and materials needed to make it work are so unreal that I cannot believe that it can be sustainable. Quick calculation shows that 1ton of mater pulled up by 40m can store only 0.1kWh of energy, while 1ton of water heated/cooled by deltaT of 70C stores some 81kWh of heat/cold (and we need heat and cold in many places in the world). Gravity storage is only for places where delta h exist naturally as well as access to water and minimal building/engineering is needed.
Sabine, there is pumped hydro solution without mountains: *shallow sea pumped hydro.* 10 km perimeter gravitational dam in 100 meter deep sea, could store up to 108 GWh of energy...
@@TheRealJamesKirk Yes, when tide overlaps with demand cycle. Also, that same dam construction, could be used for wind turbine placement around and sea surface within "accumulation" *(it is more like depletion, because pumping would evacuate water from it)* for floating solar panels.
Have you seen the environmentalists react when you want to build a water reservoir, desalinasation plant or a dam ? How do you imagine they will react to a much larger version of a similar object?
I found the video informative. I had worked at several pumped, storage hydro units in the USA. Also, I had been at the McIntosh site that was mentioned in the video. The unit is actually a gas turbine with an electric machine between a compressor and a turbine with a combustor chamber. During storage the electric machine is clutched to the compressor and separated from the turbine. Air is pumped into the ground for storage, and this is done when the grid load is light, usually at night and on weekends, while the cost of electricity is low. For generation, the electric machine is clutched to the turbine and separated from the compressor. The compressed air from the ground is mixed with natural gas (the fuel) in the combustion chamber to develop the power for the turbine. The idea for this design was an economic one to save on the cost for burning fuel required for compressing the air of a conventional gas turbine.
Thanks for another great video. My sitting next to me doing her own work comment about your clear and concise delivery. No nonsense. In about 2005 I was part of a team for a project to be used by the Australian military. The system used various mobile radio towers and had to operate for 14 days on stored energy. That was when I learned that Australia had stated that solar systems had to be prepared for up to 14 days of a lack of sunshine. Only happened infrequently but was unpredictable. I also looked at various systems including hydrogen. Ultimately chose some lead acid batteries with a diesel generator that ran for a few hours a day. When at home I wanted some energy storage I thought about a concrete weight. A simple calculation told me how impractical it would be.
Modern flywheel storage uses large flywheels, in vacuum, with magnetic bearings. Storage losses are about 2-3% per month, which is pretty good. Cost is somewhat better than lithium batteries. Alaska uses a lot of flywheel storage for load balancing. Due to the large distances involved, there are a lot of micro-grids instead of one large grid, so power has to be balanced locally.
Not just "pretty good", rather illusional. 2-3% per hour is more realistic. And it's not cheaper than batteries, but faster than batteries and cheaper than capacitors and for that reason preferred for load balancing.
@@artuselias That sounds plausible for normal flywheels, but high for a magnetic-bearing flywheel in vacuum. Wikipedia mentions one from 2013 that claims 5% per day, but the source is a RUclips video in German, so I can't evaluate its credibility. en.wikipedia.org/wiki/Flywheel_storage_power_system#Energy_loss
@@danwylie-sears1134 The researcher in that video is credible, but that number is meaningless without context. They are talking about superconducting bearings. Here is a real-life example of a magnetic-bearing flywheel in vacuum: www.bves.de/wp-content/uploads/2016/03/FactSheet_mechanisch_Schwungradspeicher.pdf Self discharging rate is about 5% per hour. Investment cost is estimated at 6000 € per kWh. Decreasing one without increasing the other one is hard.
Hi, Sabine. Have you spent any time researching recent developments in geothermal energy extraction and conversion, such as deep, closed loop systems? I would enjoy hearing your thoughts on that subject.
Indeed!..Thanx Sabine for delivering this informative podcast on this crucial topic. @ Elon Musk; pls HIRE this superb German scientist for the coming decade; she can save you a lot of time on all kinds of innovative solutions you might ponder on! As for the energy discussion. The entire discussion about fossil fuels and storage can be solved by a global switch to Thorium LFTR nuclear energy as China is doing coming decades. There is enough Thorium on the Earth surface (no need to mine) to power the entire Earth cheaply for 3000 years. Norway has plenty of Thorium to cover all of Europe for centuries. With all this power you can produce unlimited amounts of hydrogen as storage for planes and ships. Next additional solar can complete the mix for households and EV's. The entire discussion is SOLVED. Why don't we do it? Long terms waste issue? no! Thorium radioactive waste is only a fraction of a nuclear power plant and has a halftime of merely 500 years as opposed to 10.000 of current uranium waste isotopes. Safety issue? nope! LFTRS are inherently save by design. Technology issue? Nope! We already had a working Thorium power plant at Tennessee Oak ridge in the 1960's!. It seems we have completely lost our minds by not even discussing thorium but instead wasting billions in dreams of unnecessary nuclear fusion. Time to wake up all NGO's who only are advocating woke GINO (green in name only) society disrupting solutions, leading to current increased dirty coals and wood burning energies. Again we have a choice. Fosil fuels can be a thing of the past within a decade if only we embrace Thorium. period.
Thanks Sabine, I have been anti nuclear energy my whole life. I’m 61. I’m also an Australian Green Party member, where, ‘Nuclear’ is a dirty word. I believe that nuclear energy is our best hope to produce enough energy to power everything and is do-able right now. Thanks for the information and the clear, concise way you present it. Cheers.
Actually, it's not really doable like you think. It takes a long time to build a nuke plant. Fact is, you can build a lot more energy output of every type of renewable for less money, and in a lot less time than nuclear. Not to mention companies can't get insurance for a nuke plant. Sooooo, we the people bear the costs if anything goes wrong. Pay attention now. We have to pay for all the bad that might happen, while the company makes a damn good profit, that it gets from us. Nuclear accidents are quite common. We've been pretty lucky so far that we've only had 3 bad ones. And BTW, chernobyl, 3 Mile island, AND Fukushima we're all caused by the same thing. Humans making stupid decisions. Three Mile Island had an actual problem. The computers were doing what needed to be done to shut it down safely. Humans decided the gauges were wrong and jumped into the middle of it..... Chernobyl happened only because humans decided it was a good idea to run the riskiest test they had, at the absolute worst time to do it ..... Fukushima only happened because a room full of supposedly intelligent and educated people thought it would be a great idea to place a nuclear plant right in a combination earthquake AND tsunami zone. Not only that, but they thought it would be just a great an idea to place the diesel powered backup generators, and their fuel supply, right down on the ground..... We aren't remotely ready for nuclear. Not because nuclear is dangerous, but because humans make too many mistakes. If your goal is to get off FF, nuclear is the slowest way to do it.... Not to mention that with nuclear, you're either going to have to store energy, or keep using natural gas peaker plants. Nuclear only works as a "baseload" power source. The amount of electricity used, and where it's used changes drastically throughout the day and night. (Seriously, look up how much we have to move FF made electricity now) AND since the most expensive renewable, with nighttime energy storage, is cheaper than the cheapest FF(and FF are cheaper than nuclear) I don't see a long-term place for nuclear. Never mind that even the new nuclear requires about 500 years of waste disposal. We have absolutely zero experience storing dangerous things for hundreds of years. That will be expensive, dangerous, or both, depending on what we do over that 500 years ..... ALSO, renewables, while being cheaper, than everything else, provides massive jobs. Right now in America, 63% of electricity comes from FF. That 63% gets us a little under 900,000 jobs Solar is just 3%(2.7% actually, the charts all round to nearest whole number) of electricity production, yet it provides just over 500,000 jobs... Multiply that 3% energy by 21 to get the same as fossil fuels, and you get 10.5 million jobs.... For less money. Of course, things don't multiply quite like that. So we could probably only expect 8-10 times more jobs(4-5 million) for solar.
@@lordgarion514 Wow, couldn't make it past the first chapter of your book to realize the rest must be nonsense as well. China and South Korea have been building them in four years. Many other countries have been building and using small modulator reactors for many decades in two years or less for millions not billions.
@@danadurnfordkevinblanchdebunk You just like making shit up. Smr have not been used for decades. And I know how long it takes to build a nuke plant. AND you can build more renewable power, in less time. And those small ones that cost millions, not billions? Yeah, they tiny little things. If you multiple the power up to a full size nuclear plant. It's still billions. And no matter what the smrs cost, renewables are still cheaper and provide more jobs
@@danadurnfordkevinblanchdebunk And when I say smrs haven't been used for decades, I'm talking about on land. The US Navy has been using them for decades on ships. AND they cost billions.
Having revisited this vid for a context fresher... I am reminded of just how much of a treasure you are. :-) If you have considered doing updates to existing content, I vote for an energy storage update (and a practical antimatter vid/update) :-) *Why you don't have 10M subs is a depressing reminder of how few people are actually interested in understanding the world around them.
I WAS an Engineer Technician for a green energy R&D think tank. We built a CAES system using shipping containers to ease transport and deployment issues. It worked so well and was so efficient we scrapped that project and moved to thermal energy storage. That can is still being kicked down the road to this day but the death knell is on the horizon. So much that we moved on to carbon capture. ... and because of this I so too moved on but you should see our impressive stable of unicorns!!!
Sabine has the ability to understand what we need to know. I will have to watch this many times to let the facts sink in. It would be helpful if she could publish “cheat sheets” for each video with the salient numbers.
is she really unintelligent enough to believe in the man made climate change hoax or does she go along with it to help her own popularity on youtube? this video is not informative, its not even disinformative, its plain deformative. it deformed my opinion of her. look its all crushed and broken now.😫
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute.
@@brucegoodwin634 But I'm not talking about the use of any flywheels. Just simply the unwinding of a spring through it's axle and geared to turn the wheels. What flywheel? Maybe a flywheel can be included to increase the efficiency or allow the vehicle to coast longer with the motor off or something.... but what i'm talking about is strictly the spring tension motor compared to an electric motor and battery.
One of the key takeaways when you are looking at all of the costs of producing, storing, distributing and using energy is that energy efficiency is crucial.
When the wind stops and the sun is hiding, you need base load power… better have something in reserve…. Nuclear, biogas, Ethanol, coal….or a big ass pumped hydro dam pair….
One of the takes aways for me was that we need to use geothermal storage to heat our home rather thatn using electricity or hydrocarbons... oh and go nuclear!
@@surrealsurrealism Actually just a simple old fashioned hydroelectric dam works as storage - when the grid has wind or solar it winds back and then winds up when it isn’t. It’s renewable energy too.
@@guybuller1358 Actually you could go geothermal to heat your home tomorrow - drill a 100 to 200m hole in your backyard and drop a coil of tubing in it. The ground heat will be sufficient to heat a moderately well insulated house.
Energy storage really is the '3rd leg of the tringle'. Wind and Solar are well established, and are very economical sources of electricity. Without electrical energy storage, those intermittent renewable sources can only amount to ~20% of the energy portfolio, without creating instability in the grid. After that, they become more of a nuisance than a help, because of generating stations having to 'chase' the random extra power on the grid. They can't respond to sudden changes, like a portable generator with a governed engine.
And it ruins my day. Alone the need to talk about this in 2022 is the ultimate sign that german politicians are f**ing up the whole country by woke Idiotism...
Great word. And not limited to Germany. Here in the Pacific Northwest we get them too. One I kept track of last winter was eight days of dead calm and heavy overcast. The solar panel on a remote tank level transmitter put out 1/14 of its summer time rating, and the days that time of year only last for 8.5 hours, and you probably lose another hour at each end due to horizon clutter and haze. And it's cold of course. So my all electric house takes 60 kWh per day (yes I have a heat pump) and you can do the math to find the combination of PV panels and batteries to get through that.
One of the pleasures of travelling to German speaking countries is to hear and see words like Dunkelflaute. Of course, being Australian, I have appreciated this ever since I saw the word “Ausfhart” on an Autobahn sign.
One item not mentioned is power dams. Dams can be used as batteries. Similar to pumped hydro just without the pumping. Use whether forecasts to predict demand requirement. Use the power from dam when other renewables are not available.
Best idea I heard so far for Germany is to build large hollow sqheres at the bottom of the sea or lakes that are equipped with turbines which generate power if the water above fills the sqheres thus generating electricity. If energy has to be stored, then the water will be pumped out of the sphere. So we have pump hydro system without the problem of finding an appropriate location. But even better: in Germany we have the 'Hambacher Loch', a huge area where coal has been removed and now there is a hole which is about 450 m in depth. The idea is now to build these spheres at the bottom of this gigantic hole and then fill it with water. Calculations seem to show that this could solve the storage problems mentioned with 'Dunkelflaute' for Germany completely. (Distribution problems with the grid not taken into account). Industry (RWE) is interested and I hope that they will realize this project in the near future. Whats nice about it: no 'rocket science' required and first projects in the 'Bodensee' already showed that it works well, no 'bad surprises'.
Loved the video. THanks for talking about all the storage options in such a well organized way. Typical Sabine. What should be brought up is that with wind, solar, and storage we will soon get a situation where we have superpower when there is NOT Dunkelflaute. In other words, power will become incredibly cheap. We have already seen this in Europe where they were GIVING power away to ditch the extra power. I would LOVE to see a video on that Sabine. You are my favorite science educator. Thanks!
Well you are right; the problem is if we really expand the generation of solar and wind a lot (so that for example we are able to produce the total electricity used in Germany in one year), then we are talking about *extreme* superpower (5-10 times of what we need at a particular moment). This means power will not become incredible cheap: It means we have absolutely no clue at all what to do with this power. Prices either will get extremely negative (hey you take 1MWh: I will pay you 500 EUR if you do!) or we simply have to shut down all this nice solar plants/ wind parks. In the second case the problem then is, that we *do not* use the generation potential efficiently, which will in fact increase prices, at the time we do need the power. So no: "Superpower" is not something I am optimistic about.
@@lundril I don't think switching off wind turbines and solar panels temporarily is an insurmountable problem. By my understanding they already do this. Over time, I think the economics will partially address this issue - anyone with an electricity-intensive but discretionary task (industry mainly) will shift processes around to cash-in on electricity when it's cheap.
Sabine, have you looked into Ambri which store electrical energy using liquid batteries, cheaply according to MIT professor Dr. Donald Sadoway, dirt cheap. His MIT lectures on solid chemistry are unique. (The most impotant class, at MIT)
One of the early pumped hydro storage project (Tom Sauk reservoir) was built in the early 1960's about 85 km SW of St. Louis. The pumps were on during the night when the cost of electrical power was cheap. It generated power during the day when power was more expensive. The reservoir failed in 2005 but was rebuilt.
Niagara Falls has been pumping water at night since it was built in the 1950's. They're allowed to take a larger fraction of the water at night and in the winter when fewer people are visiting the falls.
Sabine, this is a really helpful summary however my point would be, if that generated energy would go to waste anyway (I’m talking about curtailed energy production when the grid is already in surplus) then we shouldn’t really worry too much about the efficiencies too much. Some storage is better than nothing. Dunkelflaute? Two days a year? Two days. Nuclear base load: get some SMRs set up. These can be built relatively quickly.
It's zero days a year if there is enough surplus capacity to support a hydrogen economy in addition, which would make chemical byproducts like fertilizer, synthetic aviation fuels and synthetic foods incredibly cheap.
It would be interesting to include Lithium IRON batteries in the mix. I use these in my home solar system to store about 10 kwh. They have a much longer life then regular Lithium Ion batteries. I think your videos are great. Thank you.
Cheap as well. More in the $100/kWh on the pack level right now, certainly not 400 and, because of massive production increases, will continue to drop in price. I think the main thing holding Lithium batteries back right now is scarcity.
I loved the video! Your comparative costs are very informative, but I believe the energy units in the comparisons should have been megawatts instead of kilowatts.
Great presentation and subtle (sometimes) humor. The only thing I would add is to look at LFP battery storage which supposedly is cheaper and last for many more cycles. I confess to being a Tesla fan.
You’re right here to keep eyes on LFP. It has potential to provide $30/kWh cost as BESS with 6 hour profile. Add the high cyclicity (10.000 cycles) and long calendar life (20-25 years) you end up with very low storage cost.
This is so wonderful! I've tried to communicate all of this to people around me without all the nice numbers and graphs! I will use this video as an aid in the future! Also I might strip some technicalities from my own little TED-talk because I think it takes away from the big picture. I am so happy! :)
@@MarcoNierop outdated numbers or not, when the differences are this enormous it is not just a matter of improving/building out. Also "fixing" something like the tilt of the earths axis is simply not doable. I used to be hopeful and followed the advances in solar technologies very closely (multi quanta, piezo electrics at night, ...) but I've kind of lost hope for where I live. Further south it can/and was something for individuals - but it just doesn't scale very well when everybody needs batteries.
Compressed air is an extremely complicated energy storage system. The most efficient solutions have a way to save the heat generated during compression, and then use that same heat to heat the extremely cold air during decompression and power generation.
That is really key to make CAES viable, yes. Without it and using NG-powered heating systems on the discharge cycle, efficiency is rather meh and the carbon balance quite terrible. Could maybe use the heat from a nuclear plant, but then may as well use that NPP's energy directly instead of bothering with CAES :)
Liquid CO2 as the gas cycle has the benefit of not needing to be cooled to extremely low temperatures like liquid nitrogen/air systems. It can be kept at ambient temperature indefinitely without spending power to do so. It’s also easy to keep contained in a sealed system with almost no leakage.
@@hugegamer5988 you didn't understand me, the problem is that when gas is compressed, a lot of heat is generated, and vice versa, during decompression the gas cools down whole sistem - if you allow the heat created during compression to go to waste, the system will be terribly inefficient, because you will have to use energy for heating during decompression. (it doesn't matter which gas it is, this problem is present) Think of a can with compressed air or paint, while you use it the can cools down terribly, if you don't warm it with your hands, the pressure will drop and you won't be able to continue working...
@@goranjosic I understand l. I have a masters in mechanical engineering and this is a high-school level understanding level video at best. The heat is captured upon compression and released upon expansion to increase the efficiency in both cases, and it is significantly less loss for the CO2 over nitrogen. Isothermal expansion isn’t efficient, it’s a free lunch you get when your environment has a ambient thermal reservoir or in this case, stored waste heat energy.
The tulip wind turbines are pretty good even at low wind but for my money, the advances in drilling (using heat beams) means geothermal is the right decision and will get better as the cost decreases. Some neat batteries coming, liquid metal batteries and such.
Hello and thanks for the video! I must say that I’m a little bit confused by some points. Maybe others understood them better, but I’d need some more help to wrap my head around. 1. Could you indicate where the figure of over 1PWh storage capacity comes from? Not at all arguing it is wrong, but it feels like such a figure needs a lot of context. Indeed, the needed storage capacity heavily depends on how often you charge and discharge your battery. In the case of lithium-ion batteries, this would be approx. once a day, but in the case of hydrogen storage (or the example from Finland), I believe it makes much more sense to store energy over longer periods of time. So between those two different models of energy storage for the same capacity, you easily have a factor 10 in stored energy per year. 2. @13:52, I find it weird to compare the energy densities of fossil fuels with the capacity densities of lithium-ion batteries. One is single-use and the other can be charged over and over. Or am I missing something? 3. The figures at the end concerning the carbon footprint of energy storage seem to be specific to lithium-ion batteries. Although after having re-watched the segment it becomes clear, I think it would have been nice to state it clearer. In fact, I’m not an energy expert, but it seems reasonable to expect that for pumped-hydro this figure should be much lower, as well as for storage systems like hydrogen (as you only need to build the electrolyzer, the gas tank and the fuel cell).
Good points! What I'm also missing: CO2 footprint of batteries comes from manufacturing, only. Given all energy sources are carbon-neutral in some future, manufacturing batteries becomes carbon-neutral as well, making batteries a clean storage option. Same thing for about all other storage options.
The second point is just about transport efficiency,you need more kg of batteries for a certain task than fossil fuels,which also makes the task take more energy And it also applies to mass-storage in some scenarios.
(2) Carbon based fuels are not necessarily single use, if we could figure out a way for both fusion energy and reclaiming carbon from the atmosphere then we could use the massive amount of carbon based stuff we already have such as cars and then reclaim carbon from the air to create fuel again using the energy from fusion reaction. That would be the most viable short term (less then a hundred years) solution since we all know that many poor countries in the world will continue to use carbon based stuff like huge amounts of existing old cars. Also current cars using carbon based fuel are much more secure and efficient than these battery based electric cars. That would also be a way for rich countries to solve the problem of global warming while not giving away their technological secrets which we all know they don't really want to so for many decades in the future some countries like Venezuela will continue to blow carbon into the air.
@@HansPeter-ft9hx Modern electrolysis technologies are quite a bit better, generating hydrogen at some 80% efficiency. Some eben claim 90%+ on the laboratory table. As this will be a billion dollar business in a couple of years, there's a lot of research going on, of course.
Good video. Imho the efficiency numbers you put on some things are optimistic. I think they exclude conversion efficiencies for converting for example electric to pumped hydro and back. 90 % on each conversion is fantastic so 19% at least is already lost on that alone except for the rare case you do not need a conversion.
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute.
@@termination9353 Absolutely. And it's done. For mechanical clocks, car break systems absorbing the kenetic energy and releasing it when pulling up. May others. The problem is the energy/(cost and space) ratio is low. Remember your toy car using a spring or friction motor ( if you're young probably not ) ? It would run 30 seconds maybe. Remember your battery powered one ? It would run half an hour.
@@hanslepoeter5167 Wrong - I could wind for 5 seconds and get a few minutes run time. And a windup windmill/pinwheel atop a pen that winds in 10 seconds but goes on for 5 minutes. And remember these toy motors are not designed with any actual usage in mind. If the problem is come at with designing using the springiest steel that releases high torque with many spring coils arranged in series. Your ideas of efficiency on paper do not necessarily correlate with efficiency in all application in real life. Your paper efficiencies do not take into account charging times nor weight if the motor is to be used in lugging itself around (with passenger) instead of idle on the floor. Even if you were to say the electric will give me a bit better distance than my tension motor - it's not efficient in the long run if I have to wait hours to continue my journey when I could take a shorter distance with only 5 minutes wait time in between. And then also, where is there any efficiency when thousands upon thousands of used up two-hundred-pound batteries need to be disposed of? They are going to end up being dumped in the woods like what happens with tires when nobody wants that shit. BATTERIES ARE 1000 TIMES WORSE noxious and toxic.
@@termination9353 Technically I did not talk about efficiency in the comment you refer to. If you talk about efficiency in solving the problem then sure, you make some interesting points. But I simply do not see a solution in the form of winding up your Tesla and drive for a 100 km. Using current materials. I don't think it can be done. Charging the battery and drive 100 km in your Tesla is common practice.
@@hanslepoeter5167 "Charging the battery and drive 100 km in your Tesla is common practice." Common practice for who? The wealthy who can afford a Tesla. A tension motor would be hugely cheaper and affordable to the average person. If the industry were to put out such a much cheaper tension vehicle that a greater portion of the public can buy one, even if it only gets 50 miles on a charge but a mere 5 minute pit stop to recharge (in a 200 mile drive which would get there sooner the Tesla 100 mile range with long charge time or the tension motor 50 mile range with near instant charge time?) then the tension motor will be the "common practice". (The actual common practice today is electric bikes of only 20 miles pedal power assisted. They are selling like hotcakes cause the average person can afford it and are willing to make due with less distance on a charge - should try a tension motor pedal power assisted bikes as well).
The phrase "site specific" is very useful. In general, the best option for both generation and storage will depend on where you are. The more options, the more likely your location will have resources/conditions which makes one of them a winner. BTW: Energy density (either per mass or volume) is much less relevant for this topic.
My biggest worry is that the energy production we think we need now will be very much under-estimated because of climate change. For example it's very clear we'll be running far more AC than we do now. Which takes up a lot of energy. And building, transporting, etc. those AC units will probably also create CO2. The droughts will probably mean we'll have no choice but to start doing desalination, an other bigger energy user. we will also be creating lots of climate migration and thus we'll have to build more homes, again more CO2
Sabine, thank for your informational and trustworthy video. What annoys me, is that everybody is talking about reducing emissions from cars, but hardly ever speaks about pollution from burning wood in a stove at home. Very cosy, but it fills the whole neighbourhood with smoke, from which it is impossible to escape and which is intoxicating me which I really don't appreciate. Can you do a video about this subject?
Applying my participation 🏆: H2 storage seems like a great methodology, because it could work hand 🤚-in- 🖐 with solar power. Create excess solar capacity and divert the excess to water electrolysis. We might even have large membrane units to convert the H2 back to electricity so as to avoid the energy losses to heat if combustion was used. Just don't use H2 in cars or attempt a network of H2 distribution for transportation needs.
Agreed. Hydrogen is the answer. Produced by excess renewable capacity in the daytime and then used at night. It could even be made from simple hydrolysis of sea water.
Depends, storing hydrogen is a pain, and fuel cells are complicated systems with a short lifespan. I think the cost estimate given in this video is rather too optimistic. Using the electrolysed H2 ('green hydrogen') for industrial processes makes a lot more sense than to use it for energy storage. At this moment green hydrogen is far too expensive compared to NG-derived hydrogen.
@@MayaPosch Again it depends, if localized industrial processes must equipped to consume H2 in addition to electricity, then that expense could considerably outweigh the cost of H2 storage. But I do agree that H2 storage is "a pain." The tiny molecule gets past many fittings; monoatomic hydrogen (which can exist temporarily due to collisions or reactions with vessel walls) will diffuse through layers of steel and can get trapped as H2 in pockets of steel; leaks are hard to find; and if there a leak that has ignited, it burns with an invisible flame. But H2 is stored all the time because these risks can be managed.
@@tedlis517 Hydrogen is commonly used in industrial processes, such as the steel industry. There they use fossil fuels as the primary source at the moment. Currently hydrogen from electrolysis is not competitive yet. See e.g. Swedish 'green steel' as a recent trial run. Hydrogen is indeed very annoying to store. It'll cause metal embrittlement and can ignite when mixed with air anywhere between 15-75% hydrogen, resulting in a very violent explosion if an ignition source is found. Hydrogen storage is usually done in wrapped carbon fibre vessels that can store hydrogen at very high pressures, but these vessels only last a few hundred cycles at most before they have to be replaced, and require constant inspection for flaws. I guess hydrogen is rather like ammonia that they have their uses, but handling them is anything but pleasant.
Thank you. I must say, however, that the cost information you provided was confusing. There is the construction cost of setting up a storage mechanism, and then there are ongoing costs of operation. I didn't see these clearly distinguished. Maybe you mean the efficiency numbers to represent implicitly the ongoing costs of operation?
If Sabine is being as attentive to detail as she usually is, my guess is that she's including the construction costs (monetary and Carbon) over the lifetime energy production/storage, which can be distilled into one number. For instance, if it costs $100 to build, and $1 per kWh to operate, with a lifetime of 1000 kWh hours, then the total is 1 + (100 / 1000).
The cost provided is the capital cost to provide the capability. in $/KWh. The cost added to the electricity is the amortized cost over the lifetime of the storage system. If a battery system lasted 1000 cycles, a $400/KWh battery would add $0.40/KWh to the cost. An 80% energy recovery would add 20% more. If 10% of the energy has to be stored, the additional cost overall would be 5 cents + operating costs. But if 50% has to be stored, 25 cents added. The present wholesale cost of my electricity, before distribution, is 3-4 cents.
@@davidb2206 No. storage is a negligible fraction the total operating budget. Today store spent fuel rods are a potential supply of unused uranium, too expensive to extract compared to virgin uranium, at least in the US - France does reprocessing.
Antimatter should've gotten the most insanely expensive idea award. Cost of producing 1 gram of antimatter : $62.5 trillion (USD). Even so, it's an extremely appealing approach. It gives us unlimited opportunities to panic and yell with a Scottish accent (like Scotty from Star Trek). "Capt'n, I d'not think the engines can take any more. They're gonna blow! "
Use Higgs Boson to make things less heavy (for less work) or heavier (for example to use gravitational energy). Or a graviton maybe🤷 I like nonsense too.😀
I sense some skepticism. See, the problem with the CERN peeps is that they haven't yet bothered to reverse the polarity. Just do that and, like, endless power man. If it's good enough for Scotty, it's plenty good enough for me!
I just have a minor thing to add here which should be taken into consideration regarding the CO2-emission estimates for renewables+storage. The estimates are usually based upon a snapshot of the respective industrial processes of which are involved in making of the used materials and products etc. In other words they are relevant for this moment in time as many of said industries have not yet undergone a "renewable transformation" (for a lack of better words). This transformation will look different for different industries, for example in steel manufacturing there's an inherent CO2 emission process through chemical reactions, which is now being adressed by using hydrogen instead. Many of these industries are electrical intensive as well, meaning that the current emission ranges are based upon the current electrical grid composition. So, in different places of the world, different final emissions are to be estimated. It is also vert important to mention here that in a scenario where we rapidly expand renewables + storage, we can therefore expect the final emissions of the products used to be lower and lower as there is a synergistic effect. Increasing the storage and renewable capacity leads to lower usage of fossil fuels which leads to lower CO2 emission when creating the products used for renewable generation and storage.
@@schmetterling4477 How about you post your own video then, mate, so we can all learn from your infinite wisdom. Paste a link when you've done it. Cheers.
@@bluecheese1066 I am not a bullshitter, kid. Absolutely nobody would watch an actually well researched video full of facts. The algorithm only promotes trolls like Sabine because that is exactly the kind of bullshit that your kind wants to see. ;-)
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute
This is an issue with storage that is often difficult to get across. With 24 hours worth of storage, solar and wind can fully cover maybe half the year. With 2 days of storage we get another 3 months, leaving 3 months worth of problems. With 4 days we still have 6 weeks of problems. With 8 days of storage that drops to 3 weeks. With 16 days of storage that drops to 1 week. I'm not using real data, just illustrating the asymptotic nature of the storage problem. Because the cost equation makes implementing 16+ days worth of storage untenable,. let alone any more. The sweet spot for utility-scale storage is somewhere in the 7-day range. But this whole problem changes when we add a little base-load back in, and that's the part that I think most people don't understand. With just a small bit of reliable base load, the storage requirements are cut in half. And with a bit more, they are cut in half again. It is possible with just the addition of a modest bit of nuclear to make renewables the dominant energy source on the grid. But adding base load back onto the grid has its own problems. Right at this instant, base load is not a good fit because there is no steady demand. Everything is on a daily cycle and base load sources such as nuclear have real problems cycling that often. It just isn't economically workable. But once batteries are able to bridge 24 hours, that whole equation changes... then batteries can charge during the day, discharge the rest of the time, evening out the generation requirements. In THAT scenario, base load winds up being economically sound again. Not only economically sound, but having base load on the grid at that point greatly reduces the additional storage required to make the grid reliable 365 days a year... from several weeks worth of storage to just one week worth of storage.
Good points. Now, if the base load capability can be partly to largely replaced by slow, "old" simple, cheap tech, like sand batteries, etc, then things look very promising. At the margin, having a lot of high tech, fast, flexible, LI, etc. batteries is needed. But for the multi-day storage, we can be far more creative and really help the overall cost base for green energy storage.
Essentially you'd have renewables whenever available, nuclear to support long-term dips in generation like the off-season, and storage to cover both daily fluctuations in demand and up to roughly week-long dips in generation (which also buys nuclear time to adjust.)
If that reliable baseload power is advanced nuclear, you don't need intermittent electricity sources in the first place. It can't be our current nuclear tech, it would have to be the advanced reactor design that are in the licensing phase. They will be no more expensive than a coal plant and safer than our already safe reactor designs.
@@chapter4travels I agree that we should use as much nuclear as we can, however right now it's hard enough to stop people from decommissioning nuclear, let alone switch to a full-nuclear grid. I'll settle for some.
@@Racnive If the goal is to replace fossil fuels, then we have to wait for advanced nuclear because wind and solar can't replace fossil fuels, they can only make them more expensive. If the goal is to feel good about ourselves, then wind and solar are wonderful. Crazy expensive, but wonderful.
excellent presentation, I'm in the RE business so I can appreciate the rigorous approach with numbers. However when comparing energy content of different sorces (13:15) you should mention the big difference between chemical electrical thermal and potential energy, all expressed in kWh but with very different usability
Great point as electrical energy has much higher efficiency potential even greater than 100% heat pumps as much as several hundred percent, whereas all the others have efficiencies lower than 100% percent.
Ive been following you for a while and I have always liked your videos. But you are getting progressively funnier, literally made me laugh out loud a few times.
It indeed hard to overcome the induced inefficiencies of conversion twice from a battery storage system (once to put energy in and then again while using said storage). Batteries only store DC power while we use AC because of the nearly lossless transmission.
Yep , I'm in the high voltage power distribution this alternative rosy future leave me somewhat puzzled , do those people know what is involved as we say " great concept....stupid idea "
@@johnscaramis2515 Ah, that makes a difference. Central Europe only has short AC distribution runs, in general. Still, 6% is very low, I suspect it's nearer to 20-25, when you include substation transformer losses, although if they've switched to electronic transformers, that may not be the case. I'm not familiar with the European systems. Here in Australia, where lines run much longer distances, the losses are much higher. The Chinese are running several VHVDC lines, up to over 3000km, with end to end losses, including conversion (using Siemens technology) of around 3%. We run HVDC from the mainland to Tasmania, under the Bass Strait, at lower voltage than the Chinese are using, with losses of around 5%, to connect to the large Tasmanian hydropower resource There is no possible way to achieve that sort of efficiency with AC.
The losses are minimal compared to fossil fuels, for example from the potential energy in oil in the ground only 15% drives the wheels of a car, Yes on average 85% lost in the mining, refining, transportation, and un-efficiency of the combustion engine. Compared to batteries that can be over 95% efficient.
I like the idea of storing energy in a very big tunnel underground. I hear there is just such a tunnel (circular as well) that goes underground between France and Switzerland. We could call the storage facility: Concentrated Energy Renewables Network or CERN for short. 🙂 Oh by the way great video, thanks very much.
And if you wouldn't only heat the water in that circular cavern, but let it circle in one direction, you had the biggest flywheel on earth (26,7km / 17mi length)
Thanks for another great video Sabine. But I am a little disappointed that you did not mention Tidal Power when discussing Renewables. Tidal Power is not subject to Dunkelflaute, as the tides still go in and out, no matter what the weather. All the Best, Paul C.
We've basically failed at producing tidal power so it's been largely abandoned. The dual problems of the corrosiveness of seawater and marine fouling made the maintenance challenges effectively impossible to solve in an economic fashion, unfortunately. That's why almost no-one talks about it anymore. It would be great if that weren't true, as it would put a lot of power generation right where we would want it for desalination, but unfortunately it seems to be a dead end.
Rarely discussed are the Raw material requirements for energy storage. Especially the need for copper and other rare metals. Is there a enough mining capacity to meet the anticipated needs of developing both short-term and long-term storage capacities?
This is where low-orbit asteroid mining comes into play. It may sound like science fiction, but scientists are already working on it now. I can't wait for when we start to see this happen as it will drive us further into space exploration. A company called AstroForge already have 2 missions planned this year alone. Countries such as China and America will eventually compete to mine for the minerals.
i reckon if we do end up utilizing antimatter in our lifetime, it will be in an ultra-diluted form. like, think a ring of anti-particles spinning in magnetic field, definitely not a chunk of anti-steel.
You did not mention liquid metal batteries. There is the US company Ambri commercializing them. They are supposed to be cheap, durable and scalable. Unlike for lithiu, the materials are ubiquitous and cheap. Oh, and they don't explode. 🙂
Lithium-ion is currently the only battery-type we produce on large scale since it's the most energydense and thus perfect for laptops, phones and EV:s but im looking forward to sodium batteries or other types of batteries built for grid scale where weight and size are not as important as cost.
Lead acid batteries work just as well for grid storage. They can store more power per unit volume than lithium batteries but are just much much heavier. But that is irrelevant unless you plan on moving them.
Thanks for the analysis Sabine. Spot on, I agree 100%. Unfortunately, many enthusiastic renewables supporters fail to acknowledge the storage issue. In particular as the percentage of renewables gets higher, cost of storage goes through the roof. Dirt cheap wind and solar are then no longer diet cheap.
Whilst I agree that the storage problem is underexplored, my response to the cost would be "so what?" Whatever the cost is it must simply be paid, one way or another, because the alternative is potentially irreversible ecological destrution. Renewables just aren't optional at this point; it's not a question of "if" but "how".
It's one of the most underestimed problems. Here in the Netherlands they push everyone to electric heating with heathpumps. I just installed solar panels last year and noticed how little they produce in winter. I will already have a 2MWh shortage in fall and winter and 2.5MWh over production in spring and summer. Moving to electric heating even with the high efficiency of heat-pumps will add another 3MWh shortage making a total of 5MWh I would need to store to become completly self sufficient. Maybe geothermal energy could help us through the winter, but progress is moving too slow in this area.
@@AndreVanKammen You live 1300 to a square mile there is literally no chance of you ever having a "sustainable" life. Meanwhile my people live 7 to a square mile and we are dictated under the same restrictions as you and sold the same environmental propaganda. It's very tiring you know. Maybe there is a limit to how much energy should be extracted from arbitrarily smaller and smaller areas of land.
@@tinfoilhomer909 Yeah, cause if I'm going to take advice from anyone it'll _definately_ be from someone who calls themself "Tinfoil Homer". Please, give me more of your no-doubt very _very_ well-informed opinions.
Greetings from Norway! I have been working in the hydro energy business and find your presentation very precise and to the point. Europe is now (at this very moment) literally draining the Norwegian resources (reservoars) and as you so clealy point out; the energy has to come from somewhere!
You would have thought that after the wet summer Bergen and the west coast just experienced, there would have been an abundance of water. But long term, I imagine that once the melting glaciers are completely gone, hydro will be an even more difficult option, not just in Norway.
Dunkelflaute!!! That's awesome! I'm going to be adding that to my vocabulary and dropping it on people. What a fun word!!! Thanks Sabine! Germany's decision to go completely nuclear free struck me as a very odd choice. Never made sense to me. There seem to be some "green shoots" of hope for nuclear here in the USA, but there's still a lot of fear around it. Hopefully that will change sooner rather than later.
@@zaphod333 Thanks! I have a shirt that says, "I'm an engineer" mispelled several different ways and crossed out concluding with, "I'm good with math." I can't even get my own language right! 🤪
I was wondering how the publication/source (from 2018) of costs of Li-Ion batteries holds up with the current costs? I currently hear and see fugures below 100 USD on the pack level (not cell level). It seems to me to be worthwile to have a new look at this as prices have fallen over 80% over the past 6 years since 2018.
It would be interesting to revisit this topic regularly in view of the fact that batteries, even though they have been around a long time, are still a rapidly developing technology in which the cost is consistently decreasing. Particularly since Ulike vehicular batteries, weight and volume aren’t as critical.
For Electric Thermal Energy Storage, the given efficiency is normally only for the electric energy. Those systems can also be part of a district heating system or used as input for industrial chemical processes. That can drive up the efficiency a lot, similar to what is seen with traditional power plants. It will be interested to see how the commercial scale system in Hamburg will work out.
Naturally yes as the typical waste heat is actually something you wanted to extract from the storage anyways so only inefficiencies are when heat escapes somewhere besides the intended application. If the storage time is low, there is very little of that.
Excellent video that highlights some of the key energy storage problems in terms of overall capacity, cost and contribution to total carbon emissions. I'm sure there's huge scope for technological innovation over the next few decades to move all of those numbers in a direction that favours deployment at massive scale but I hope that policy makers will start to look at the nuclear option more seriously. There are several developed countries that have already effectively decarbonised their electricity networks using nuclear (e.g. France) or a mix of nuclear and hydro (e.g. Sweden/Switzerland). These countries provide a template that other countries should be looking to follow while the key imperative is to reduce carbon emissions as fast as possible.
What do you think about the problems nuclear plants face during drought as currently examplified by France. The template seems to be especially vulnerable to those droughts that are expected to become normal occurences in the future.
@@sualtam9509 the answer is to site nuclear power plants on the coast as much as possible. France's are mostly inland, which needlessly constrains their potential output, given France's Atlantic coastline. It might also be possible to gain the additional benefit of using the waste heat for desalination as a valuable drinking water supplement in times of drought. Of course such water would never enter the reactor and would simply carry away waste heat via a heat exchanger, with the reactor cooling loop being separate.
Yep that is the key to reduce carbon emissions as fast as possible. The only way to do that realistically ( without using perfect solution pipe dream thinking ) and try and get there anywhere near the time dead line, is to use NUCLEAR!! I just hope people start to realise this in time before it is to late!! Because the nuclear option is not something you can just suddenly decide to support and get behind in the last few years before everything is dead! Just think about that!! I hope people start to open their eyes at the enormity of the problem climate change poses, and that trying to use an elegant perfect solution to fix the problem is not the answer, when you have not time to waste!!
It is not only nuclear power plants that are constrained by low river levels in the summer, it is any thermal power plant, such a coal powered and gas powered electrical plants. They all need to cool down the steam they generate to power the turbines. Only the heat source varies: fission, gas, coal. That being said, summer is not peak demand season for electricity in a country like France. So the constraint on production at least in a country like France is not a significant problem, at least for the moment. We will need to deploy all sources of clean energy on a massive scale including nuclear as we not only need to replace coal and gas in electrical generation, but gas in heating applications which is a huge amount (probably equivalent to current total electrical generation), petroleum in land transportation, and coal and gas in industrial applications such as steel manufacturing, concrete production, etc... The numbers exist somewhere, but the world will need to multiply current nuclear and renewable electrical power generation by a factor of 20 if we are to approach carbon neutrality. So electrical power storage will be key.
@@sualtam9509 build nuclear plants on the coast and dump waste heat into the sea. Cooling towers (evaporators) that use fresh water are not obligatory: they are just most convenient way to dump waste heat when you have large body of fresh water nearby, but you can make a heat exchanger that will transfer heat to sea water without any evaporation happening. Not to mention that during winter nuclear plant can serve as a source of heat for a city and in that case "waste" heat will not be wasted at all.
look forward to your videos every day. Always and informative always clear always concise. You do sound a little under the weather today. Anyway, I hope you feel better if you are.
Such a fantastic video Sabine, thank you, I did enjoy your dry humour and clear facts! Very seldom do I see "cradle to grave" explanations anywhere on the internet presented so well. It is, however, a pity that this video will probably only be seen by people who are naturally interested in the real costs of energy (in terms of money, environment, and human well-being) and/or by the people who have enough interest in numbers to "get the picture". Not everyone grasps terms such as kWh, MWh, and many have no idea how much energy their fridge or toaster uses, so this video will likely not appeal to a portion of the general public. But Sabine, I believe your video has a loud and clear message! In fact, I would advocate everybody seeing this video, especially young people - the men and women who drive our future - they could learn so much from this video. But the group that needs to set aside their ideology and make the best informed decisions, desperately need to wake up, and take the implications made in this video very seriously indeed! In this last group I would include (at least): Every single politician of every political colour, all die-hard green NGO's, the UN, financial institutions, think tanks etc etc, for they are the people that really MUST see this video, understand it, and... I might add: They need to stick to the facts, learn the lessons, and apply where necessary.
Doing the cycling leg of a Ironman triathlon, 180km, at 30km an hour, i.e. cycling for six hours straight at 30km/h amounts to about 1 kWh. That is something a lot of us, those who cycle, can relate to. That is an awful lot of pedaling for 1kWh, an amount of energy something that we perceive as little.
Every single politician of every political colour, all die-hard green NGO's, the UN, financial institutions, think tanks etc etc....should sit through one semester of thermodynamics for engineers 101A to acquire a basic competence for the discussions that we should have and the decisions that need to be made
Once we get V2G sorted out, which is little more than a standardization issue, we'll get a large amount of lithium battery storage without having to buy or house any batteries at-all.
I’m curious. This physicist spent 20 mins explaining in this video, no doubt with hours or prep, why storage has fundamental limits. Then you think somehow she missed gravity? Why not do the math yourself. One 2MW turbine, runs for a day, then wind is down for two days. How much storage is needed, how many gravity towers needed just for this one turbine to have backup? What’s the cost? How much additional steel, concrete and other material, and additional maintenance, needs to be produced and installed on the back of the one turbine’s revenue? Or skip all that, and imagine why there are no production gravity storage towers paired w a commercial wind farm anywhere in the world.
@@Nill757 No, hydro-electric is the default gravity storage. It's the ability to combine it as a battery backup when the wind is low that fascinates me.
@@koborkutya7338 you think gravity storage hasn’t been tried? WTH? There is no significant nuclear power lobby. There is a large anti nuclear power lobby funded w millions$. There is a wind and solar lobby, driven a 100 B global wind and solar buis.
A point to remember about batteries is that their carbon intensity arises from the energy that is used to make them, including upstream emissions from raw materials extraction etc. These emissions, in theory, can be reduced significantly by using clean energy to make the batteries as well as extending their lifetime. However you can't make fossil fuels from renewable energy, they're fossil by definition. Furthermore, the carbon intensity for wind and solar can be reduced too by using renewable energy for their manufacture. However, the real killer for storage used for mitigating dunkelflaute periods is that, due to the long cycle times and low load factors, system capital costs become very significant. For this type of storage most technologies, especially batteries, fail on economic grounds. Hydrogen in this instance has the advantage that, assuming you're using large scale geological storage, it has a very low marginal cost of storage, i.e. the cost of each additional MWh of storage is small compared to the cost of the fuel production and power generation parts of the system. Having said that, there are alternative, although similar, technologies that should perform at least twice as well and provide more flexibility.
Thank you for this wonderfully informative video. We in the USA use a technology for our nuclear reactors that was originally developed to enable the reactors' use in naval vessels. (E.g., aircraft carriers, submarines) I believe there are other reactor technologies that, because they need not be light, could produce nuclear power much more safely and/or efficiently from land-based installations. The phrase, "molten salt" comes to mind. Perhaps you could address some of the types of reactor technologies available today and identify one or a few that might make safer, and/or more efficient, land-based reactors. Again, thank you for this excellent video.
I made a similar reply. The ship based reactors have not prevented these Naval ships from visiting the world, people take tours on them, and men and women serve on them with safety. While typically less than 500mwh, they could be quickly deployed wherever there is a cooling water source. Ocean, lakes, rivers and be quickly deployed. How long are we going to wait for a breakthrough solution when this one has existed for almost 65 years? If you believe that CO2 (open discussion) is the root cause of ending mankind’s existence I think you would make and risk analysis of this solution and start deploying. Almost a rant, sorry.
Russia use REMIX technology that allows a large percentage of the spent nuclear fuel waste to be reused with only a very small amount of new fuel to be added to recycle the already used waste. This tech virtually eliminates the need for used radioactive waste disposal, as it is recycled back into the reactor. I believe the EU use MOX technology in their reactors which is virtually an earlier version of REMIX but not as efficient in recycling and dealing with the radioactive waste. Cheers and Beers!
9:50 when talking about thermal energy storage, are you referring to storage using resistive heating only? I remember reading up on a pumped heat storage concept a few months ago with an expected round trip efficiency of 75 to 80 %, which would put it on par with pumped hydro. I'm not an engineer, but it seems pretty neat, and I was wondering if you had come across any projects of that sort in your research for this video, and what you thought of them. The concept I saw being proposed used two insulated tanks filled with gravel, connected by a heat pump, that would circulate argon from one tank to the other to create a temperature differential between the two, -160°C on the cold side and 500°C on the hot side. Then to discharge the battery they'd just run the heat pump in reverse as a heat engine to produce electricity. They also proposed using either the heat or the cold directly for industrial purposes if need be.
Pumped heat storage at very high temperatures is very hard on the pumping and turbine equipment. Turbines run at high RPMs and high temperatures but they must be reduced in speed to accommodate the generator or motor. This means very large and very expensive turbines like those used for thermal power plants in the several hundreds of megawatts range. Suddenly it costs as much as a full-size thermal power plant.
That definitly doesent work. First, heatpumps are only efficient at relatively low temperature deltas. In this example, theres no benefit using a heatpump over resistive heating. Second, a heat pump simply cant produce energy out of heat. The only viable option here is a steam turbine to transform the heat back to energy. Round trip efficiency would be approx. 25 to 40% for this tech. At least its cheap to build and maintain at large scale.
Hydrogen is extremely important because, even though it's not as efficient, it costs so much less and can be stored in salt caverns for winter to get through the cold dunkelflaute. When the total renewables capacity is 3 or more times the peak load and the excess electricity is used to make hydrogen for storage, the system can be self-sufficient and any excess green hydrogen can be used in industry to replace gray hydrogen from fossil fuels.
@@acmefixer1 H has terrible properties: It gets hot when it is decompressed, it diffuses into everything, it needs to be very cold or compressed to have density, ...
Thank you very much for this overview. There are so many opinions, especially from politicians but those are biased and not useful when it comes to comparing the options. Personally I don't think hydrogen is currently an option as long as over 99% is produced using natural gas as it currently is, it's even worse than just using natural gas in power stations and there is no sign that this is going to change drastically. At least not in the timeframe we need to lower our carbondioxide footprint. I have read about another interesting project in Finland that uses hot air created with the excess energy of wind and solar power to heat a bulk of sand to 500-600°C and use it as a source for Fernwärme (district heating?). It can maintain the temperature at the required level for months. Also ETH Zürich is working on projects that convert solar power directly to combustible materials. Still I'm convinced there is one aspect we need to consider as fast as possible, that is use less and conserve as much as possible. We can't deny that we cannot afford to continue to use as much energy as we do now. I know it is unpopular but I don't see that other solutions will be ready in time.
I too am not a hydrogen fan. You are correct that hydrogen is made from methane but I think it is a byproduct of ammonia production. I could be wrong about that and I am too lazy to look it up! Electrolysis would be a more direct route if it were to be implemented. You could co-produce liquid oxygen for rocket fuel also. Perhaps that's how it's done. Still too lazy to look it up!
I thin that, when concerning storage, H2 would have to be produced with electricity(otherwise methane is storage fuel by itself). Bulk of H2 for industrial use is made with methane (cheap comparing with electrolysis).
@@msxcytb trouble with using methane to produce hydrogen or as direct fuel is that it also produces carbon monoxide and carbon dioxide. electrolysis of water on the other hand produces hydrogen and oxygen. So it rather depends where the methane comes from, is it a byproduct of food production or are we drilling into the earth to pump it up as a fossile fuel. The main problem is that the world is rather complex and we will need guidelines as in laws that are formulated well so we actually achieve the goal we intend with it rather than what happens now with carbon offsets laws which effectively cause more carbon to be emitted while they were formally intended to reduce the total emission of carbon.
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute.
Hello Sabine, I live in the Netherlands so pretty much same climate as Germany. If you truly want to study Dunkelflaute, you should estimate the required energy generating capacity with it. Tony Seba did this for Germany and you need to store about 4,5 days of energy to work through Dunkelflaute. In our climate we have to build more wind power then solar to overcome winters (which both Germany and the Netherlands are doing). As for battery technologies costs in order to estimate them you will need to use cost curves. Prices are coming down in a rapid pace and wind, solar & battery cost per kWh is already cheaper then any other form of energy. I am sure you know the LCOE report of Lazard, where Nuclear is about 3x as expensive and annually growing in cost ($180 vs $60/MWh) Nuclear is providing energy all the time which is a benefit during dunkelflaute and a tremendous pain in the rest of the year. This is why I believe that Nuclear requires battery storage too or else we throw away a lot of energy. We have negative energy prices every weekend in summer period (EPEX spot market), as Nuclear cannot switch of. So Nuclear is way too expensive and with solar wind, batteries there is an alternative that does not create waste for a period in time similar to the existance of humanity. This video is yet another Nuclear commercial. A petty that you did not really investigate the alternatives.
The video didn't mention sodium-ion batteries, which could become very important in the future as the supply of lithium eventually dwindles and lithium-ion batteries become significantly more expensive. Sodium-ion batteries weigh about twice as much as lithium-ion batteries for the same amount of energy capacity, which makes them undesirable for cars, but the extra weight is not such a big problem for energy storage at homes and factories and power plants. Most importantly, sodium is much cheaper than lithium and the supply of sodium is practically endless.
Sodium batteries aren't really out yet. But a company is claiming they should be in production next year. And they plan on making an electric scooter with it. But lithium isn't the biggest problem. Nickel, cobalt, and even copper are running into supply issues right now. Not sure why, but almost everyone seems to think that whenever we switch from one thing to another, everything is either supposed to magically already be in production, or getting it into production shouldn't take more than a few weeks. If not, it's some horrible thing that's going to make it outright fail. Fact is, people can want things faster than plants can be built to supply them. It's natural. And people will have to wait. We aren't going to switch in a year. We're not even going to switch in a decade. There's 330 million people in this country. That equals a LOT of stuff to build, and there's still a LOT of stuff to invent. Modern cars didn't start off remotely like they are now. It took over a hundred years to get them to where they are. And people expect us to undo all that in nothing flat? Same with our electricity production. Can't bulldoze a coal plant today, and open a solar farm tomorrow morning. Also, chemical batteries, of any kind, might be great for some things, but not for everything. Wind farms are a good use f Chemical batteries. Wind turbines make electricity directly, so storing it isn't expensive. But thermal solar makes heat that it uses to heat water to make electricity. It's better to store the heat as heat, and then convert it to electricity as needed. Or you can use the heat for something else, which is more efficient.
@@jaredgarbo3679 Abundance of quantity, doesn't mean you're not going to have serious issues with getting enough. Earth's crust is .002-.006 percent lithium. We're not ever going to get that out. Ever. Once we run out of decent sized deposits of much higher concentrations, it will effectively be gone as a resource.
@@jaredgarbo3679 add to which it is recyclable nowadays, at about an 85-90% recovery rate, if the people in the business are to be believed. And due to the value of the materials, I’d expect nearly 100% recycling rate of batteries, when feasible (ie not damaged in a fire etc.).
I have a story I wish to share that does not relate to the main point of this video and is relevant only tangentially to one part, but I think that people who watch Sabine’s channel might be glad to hear it.
It concerns flywheel energy storage. I used to work at a facility in the northern US which had undervoltage release mechanisms, meaning that whenever the incoming grid voltage dipped below a certain value even for a moment, as was often the case when a thunderstorm came through the area, the system would shut down. If that happened, it would take as long as an hour to restore the system to operation.
Later, while still with the same company, I moved to a similar facility located in Florida, the thunderstorm capital of the US. Before moving there, I thought to myself, “Oh boy, that facility is going to have a lot of interruptions.” Fortunately, the facility designers though of that and they included a flywheel UPS (uninterruptible power supply). The way it works is that the incoming grid power does not directly power the equipment. Rather it is used to power an electric motor which drives a shaft that 1) rotates a flywheel, and 2) rotates the rotor of a secondary generator that actually does provide the power to the equipment.
The benefits of this system are twofold. First, the output of the secondary generator is much “cleaner” than the incoming grid power, meaning the output THD (total harmonic distortion) is much lower than the incoming THD. Second, and more germane to the topic at hand, if the incoming grid voltage does momentarily dip below the acceptable level, the energy stored in the flywheel is sufficient to drive the secondary generator through that dip and no undervoltage releases are tripped. In fact, in the worst-case scenario of a total blackout, the energy stored in that flywheel is sufficient to drive the secondary generator until the on-site backup Diesel generators kick in.
If you read through my comment so far I want to thank you for letting me nerd out.
With a conventional fossil fuel grid the implicit flywheel storage of all the moving machinery in the power stations is quite significant and does a good job of stabilising short term fluctuations.
I hadn't heard of a flwheel UPS - nice solution to the problem.
I first saw this setup at a data center in South Florida. The reliability engineering was impressive. They had multiple power lines from independent substations feeding their very large flywheel UPSes, which I was able to see. They also had contracts with fuel vendors to provide continual supply to their generators...even by helicopter, if I recall correctly.
And all that was over 15 years ago!
@@andrewharrison8436 Quite right, In England in 2019 Two large power stations, Hornsea One Ltd (co-owned by Orsted)(wind) and Little Barford (operated by RWE) (gas) did not remain connected after a lightning strike, local power fluctuations tripped most of Network Rail South East and the public network. Took about 6 hours to restore power. Lack of short term frequency resilience usually provided by rotating generators was a major contributor. UK is claiming some days have 50% + green energy production which does not have the resilence provided by rotating machinery.
Just an interested bystander, that is a great story with an ingenious solution.
The differential equations for storing kinetic energy as rotation in a flywheel are of identical form to those for storing magnetic energy as current in an inductor. Once you spin them up it’s hard to get them to stop and if you try to stop them instantly the force builds up explosively. It’s only natural they compliment each other when they act so similarly.
I live in a country with a small energy grid, only 50.000 people (faroe Islands) with no cables to other countries to buy or sell electricity. We are building a pumped storage plant where we use excess power from windmills to pump water from one Lake to another. They estimate a yearly production of 60 GWh/year when finished. I think this is a good solution for us. A nuclear powerplant would be too big, I think for such an isolated and small country this is optimal🤷🏻♂️🇫🇴💪🏻.
A small modular reactor might work for you if you needed it, but sounds like you won't; you've got the lakes and wind is probably pretty reliable for you... at the moment 😕
@Wonderin'Aloud I took Sabine’s suggestion to share the conditions in my area to illustrate that different solutions are best for different places. Sorry to have wasted your time, first reading my irrelevant comment and then for you writing a reply..
@@michaelmicek lot of wind and lot of rain.. hydro and wind is the future here, and if that disappears because of climate change, I am ok with that..🤪
Calm down dude... @Wonderin'Aloud was just pointing to the fact that there are so many countries with
So they're thinking to use the windmill's power to pump the water to a higher elevation when the wind is blowing, and then use the higher elevation water to run hydroelectric generators when it's not blowing? Is that right?
That's actually not a bad idea.
I mean, there's an enormous number of losses in that process, but they really shouldn't matter, much, because at least you're storing the energy in some way that won't wear out in 7 years, like batteries. (I understand the piping and pumps and reservoirs would have to be maintained, but it's still not a bad idea.)
What does your island use, now? Diesel generators where they bring the diesel in on ships? I guess maybe LNG with the same generators would also work, so you'd have two sources of fuel.
50,000 people uses, maybe, what? 250MW at peak times?
This would be interesting to follow to see how their plan with the reservoirs works.
Sabine, you are considering cost of production and supply from the power plant. Distribution to residential power outlets is by far the largest financial cost. In California, for every 3 cents of power production at plant, we spend 21 cents in distribution. Even if nuclear costs 2 cents to produce, it still costs 23 cents to buy in California, as compared to 24 from coal. However, when we use lithium batteries, the distribution cost is negative to individual consumer. The net cost of electricity comes down to minus 2 cents. Marginal cost is even lower at -6 cent a unit.
The beauty of your videos is the clear, concise way you give information and the (not so) subtle way you express your opinion on something. No pie in the sky dreams. Just reality and what can be.
Long time metalhead, first time commenter: the heavy metal umlaut works best if the word *doesn't* originally have umlauts. Motor doesn't have an umlaut, nor does motley. Or spinal, for that matter. "It's like a pair of eyes, you're looking at the umlaut and it's looking at you." Cöld Dünkelflaute totally works.
Coërcion is not coöperation!
Les canoës, dhë Parc Güell, naïve, preëmt
Nuclear is not an option because it creates waste and is always a risk, particularly if there is a war, cough cough Ukraine, cough cough.
The Spanish have come up with a solution
Make jet fuel from electricity, water, carbon dioxide and sunlight. The jet fuel could be used to drive generators when power is needed.
@@PWBERRETT The efficiency of that is pretty close to zero. Hydrogen is the more reasonable option in that regard.
@@christopherellis2663 Looks very "Dutch" to me, English abandoned diacritics a long time ago.
@@PWBERRETT The Spanish solution you speak of produced about a liter of jet fuel per day. Do you think this will be enough to fly even an ultralight plane?
I have been re-educating myself this last decade, and during this time I have found you on various platforms. I'm international, thus understanding many cultures, disciplines, sciences....and here express my gratitude to you for taking the time to expand my knowledge with a humor I have not often encountered. Vielen Dank, for giving freely. 👍😎
I enjoyed your analysis. And many thanks for the useful information.
I have achieved 100% energy independence over 2 years ago. I am now on full Offgrid solar, disconnected from the power grid and the system is self sustainable, enduring the challenges with rainy, cloudy cold winter without issues.
My energy storage solution relies on LFP batteries.
The key towards achieving a working solution is to plan your capacity based on the worst case scenario. This means not just oversizing the solar, the battery capacity, but more importantly optimise how fast you can charge your batteries.
In our solution, we utilise 120Ah LFP batteries that are capable of accepting a 1C charge (120A) and providing 2C (240A) discharge. If you connect these in parallel, 10x of these will be capable of accepting 1200A charging current. In our setup, we have 16x of these, providing a theoretical 1920A max charging current at 14.2V. But in real life, dealing with such high current puts extreme demands on busbars and cables.
Based on current technology, my setup is based on the Victron Lynx, which has a 1000A busbar system.
The batteries are grouped into 4x groups of 4x, essentially 4x parallel battery banks, to split the current load. Each battery bank is serviced by a 500A flexible busbars. So if you combine these 4x you still get around 2000A. By having a very capable busbar system, the high current conductors run cold and efficient. We have independent temperature sensors on all 4x busbars system to monitor.
This extraordinary high current capability allows the deployment of multiple Victron SmartSolar units (we have 8x in this setup), each capturing solar energy for strategic groups of solar panels, which are placed/angled specifically to capture solar energy during a specific time of day and season, factoring the change of incident angle over the year and season. With a high multi-zone solar capturing setup, we don't need complicated solar tracking. The solar energy is captured efficiently by each group over the day without creating a single peak in the output, instead it provides a sustained output plateau we are aiming after. And due to the very high current capability of the busbars, there is no throttling required by the solar controller. Although we have set DVCC, it never engages. This means whatever short bursts of sun or cloudy diffused solar we get, we can totally capture these. This is important factor in winter survival for solar set-up. And we deployed Solar panels with the highest efficiency, the Sunpower Maxeon 3 400w panels, 16x of these. They perform extremely well even under cloudy and rainy conditions. And surprisingly, in winter as the temperature drops, the output voltage actually increases. You get more power in colder temperatures. And cloudy days does not necessarily means lower output. Actually under diffused sun you can still get pretty decent output, factoring the lower temperatures. And they go on for longer hours in diffused sunlight.
Based on our observations, our LFP efficiency is not bad at all as we tracked the energy we put into the battery and the energy we get out. LFP has an energy efficiency around 96 to 99%. We are seeing the 99%, which is pretty impressive. We only have a enter minimal compensation factor in the Victron BMS controller. And we only cycle our batteries between the 70% and 100% SOC. Leaving a high margin for contingency. This further increases the lifespan of the LFP battery as we are utilising shallow Depth of discharge.
Just as general guideline, on the worst days with crappy stormy weather, we get around 1/5 or 20% of the max daily average power. In winter, with slight rain, typically this is more like 30%. On cloudy days, this is around 50%. So if you plan and build according to the worst case 20%, a 5x oversizing (on both panels and battery) is probably the safer bet for a more robust solar power system with LFP storage. 😇👍 This means the design guidelines should be based on the worst weather, to ensure your solar panels should still be able to bring in sufficient power to cover your minimum energy needs. And obviously this value would be different for everyone and different regional climate.
I run our ebikes and e-scooters off our Offgrid solar. And the ebike combined with the escooter covers 99% of our travel needs. So i hardly ever use my car that has a petrol engine these days. It has been put on solar charger to maintain it's battery health 🔋😂
And i strongly believe if everyone makes a concious effort, they are capable of making a significant reduction on their carbon footprint.
We have proven that this is perfectly possible. And it's not like i don't have to travel far to be able to have a ebike as a viable commuting option. I still need to cover 60kms on my ebike travelling round trip to /from work. But surprisingly this doesn't take much longer than the public transport or even car when factoring traffic conditions. It takes me just under an hour to cover my 30km trip. So it is not like ebike solution is time consuming. On the contrary we would say it is not only as time efficient as public transport but way healthier solution. 😉👍
Sounds impressive, but can the average worker possibly afford such a system as you outlined?
"We have proven that this is perfectly possible." where you live and with the money you have!
_>I have achieved 100% energy independence_
_>My energy storage solution relies on LFP batteries._
I find it amusing that you think EUSSR government goons can't blow up your batteries at any time.
Thanks!
Your videos are well researched and nicely presented.
I love them!
Thank you Sabina
The way Sabine delivers the Cöld Dünkelflaute line with a straight face... it breaks me every time 😂
Dunkelflaute is my new favourite word 👍
"Unlike me water has a high heat capacity"
Sabine killing it as always.
Sabine is 90% water !
@@tuberroot1112 How so?
@@mdjey2 I am afraid that is not correct. The body of a newborn is app. 70% water, but after incorporating so much science as Sabine, it drops to 60%. Some claim that to be an effect of aging, but I would of course never discuss a Ladys age.
I like how you teach, it's easy to understand your arguments, the technical details, just really fun to be taught by you.
Stumbled upon your channel recently, I absolutely love it. Hard facts delivered with british humor and phlegm are totaly my thing. Thank You! ❤
British humour -yes! Very good for a "foreigner" (just kidding -we are all Children of the Universe)
Thanks! It's good to see some _real_ estimates on how large this problem is (and the pros and cons of the solutions), and not just the handwaving I normally encounter.
IMO, it is a great to hear Sabine conclude that nuclear power "is a really good idea". The entire program to end nuclear power in Germany should be a case study in governmental malfeasance. Recent polls seem to indicate the German public is now more favorably disposed to nuclear power than before the Ukraine war recapitulated certain eternal truths. However, the government apparently is still clinging desperately to the hope that wind and solar are the answer to the energy problem, and climate change mitigation, if only the storage problem were solved. It seems that abundant nuclear power from new designs would make the scramble for an energy storage solution much less relevant.
Except for nuclear.
There is two things misleading in this video:
1. Renewable energy is such a small portion of the whole energy mix and the same for energy storage, BECAUSE most energy comes from fossile fuels. Renewables are not bad, but existing energy networks are made for constant Power supply aka fossiles.
2. Nuclear energy has a really high energy yield. Yes. But please, tell us the solution to how to store the waste for the next billions of years, instead of completely leaving out this part of the discussion.
@@seppwurzel8212 I don't think either of those things were misleading at all. In particular, the nuclear waste issue is one of the most overblown scaremonger tactics deployed against it. It's really not that difficult to dig a deep hole below the water table, load in the waste, then cover it up. Norway is already doing it. It seems difficult here in America because of politics, not technical issues.
Further, even that isn't really necessary. Nuclear waste is SO SMALL by volume that storing it onsite in dry casks (as is being done today) is actually perfectly safe and viable. Even better would be to reprocess it and reuse the fuel because modern nuclear reactors are so inefficient that they only use a small amount of the available power. Next gen designs leave behind fuel that is much more thoroughly consumed and is less than 1% of the already small volume currently produced AND most of the nasty long-lived stuff is consumed. There's also a reprocessing step for the existing fuel that can allow it to be reused for newer gen reactors once they're online. It's not super-economical yet as I understand it, but it could make onsite storage make sense as this stuff could be reused while the stuff that's been buried might be gone forever if it's already been filled in.
If you spent all day hugging a nuclear power plant, you would get less radiation than taking a airplane trip.
@@brianmulholland2467 And then there are the newer Molten Salt Reactor designs that are immune to the dangerous catastrophic failures like we've seen with the old style water cooled reactors. (see Chernobyl) Also, if we use Thorium instead of Uranium, then we have enough "fuel" on hand to power the earth for thousands of years.
Liquid air storage has a potential bottleneck when it comes to re-expansion. I was a facility manager for a semiconductor tool manufacturer that used a lot of LN2. We were constantly fighting to keep the heat exchangers de-iced to keep up the N2 flow. For something like energy storage, this is a non-trivial concern. You'd need a LOT of heat exchanger surface to keep the pressure up.
So build your plant with a lot of heat exchange area? Like if it's your job to do the thing then design it to do the thing.
From what I remember of Highview Powers liquid air battery is that they capture also some heat. When you liquefy air, you need to dump heat somewhere and if you capture the heat, you can then re-use it to expand the LOX and LN2. The process is naturally always going to produce more heat, so in theory you never have a shortage of energy to drive the expansion, if you can store the thermal energy properly. That is essentially the challenge of liquid air energy storage.
You would think all that cooling would be useful! Just it isn't being used. What was your air-conditioning doing?
@@peterbreis5407 yes, but that’s a matter of the right product at the right place and time.
Compressed air storage uses heat recouporators to capture the heat on the way in and recover it on the way out.
Thank you Sabine for yet another informative video. If pressed I would have guessed that a Dunkelflaute was a musical instrument with a deep bass sound. Something like a bassoon.
I thought it was an opera by Mozart.
@@frankupton5821 No, that’s Die FlauteMaus. More recently covered by Meatloaf.
@@frankupton5821 Its a German heavy metal band.
LOL
@@frankupton5821 Yeah, that was the working title but he was told it was too sombre so he changed it to Magical. Runaway hit.
Flow Batteries are also interesting and deserved a mention. Although you did mention Flywheel Energy Storage which is great!
I think flywheel storage would be good for at charging stations. Those flywheels can send out a lot of power quickly and keep on cycling all day every day for decades without issues. Batteries work too but they dont have the same cycle life as a flywheel.
Thanks! Sabine, this is why I watch your channel. Most of what you talked about I was at least familiar with, but "pumped hydro" as a source of stored energy (as opposed to maintaining consistent water pressure for a city's water supply (which I know, is technically stored potential energy... but... you know what I mean)) was completely new to me. Keep up the awesome work.
it's pretty much the oldest form of energy storage. it's generally build high up in the mountains (look at Kölnbrein Dam or Kaprun for instance), so looking pretty differently to like a traditional water tower (which really couldn't hold much potential energy because of how small and close to the ground it is). in Austria, you get thought about it in elementary school even back in the seventies. (that's how I became familiar with this type of energy storage)
CO2 is a ruse.
Climate change the "Greens" are talking about is caused by changes in the cosmic-rays/solar-activity relationship and cloud formation (See the work of Henrik Svensmark.) Cloud formation by actual cosmic rays can be scene with the naked eye in Cloud Chamber demonstrations. RUclips has dozens of videos about them....
I love your sense of humor and style of teaching/ relaying this information here. Much love, care and blessings to you and your family and channel. 🥰
Thanks so much, best wishes to you and your family in return!
You really are a joy to listen to. It's impossible to know when a zinger is coming and your accent is lovely.
@@SabineHossenfelder
I like humor about silly ideas too but shouldn't good storage humor come with some facts about the best solution to the energy problem - namely fast reactors? With fast reactors, there's no need for wasteful energy storage. Fast reactors are by themselves storage because they can deliver energy in a market where demand fluctuates from minute to minute. The fuel is also the most renewable that exists. There's enough uranium 238 for the whole world long after the earth is no longer inhabitable, ten billion years into the future. Fast reactors also offer to burn all the radioactive material leaving no waste. What is silly Germany waiting for? The green lunatics to take control over the country? Why are you not making yourself the spokesperson for fast reactors being the primary energy source? If not you, who?
@@SabineHossenfelder This video is great, and geeky humor helps in delivering complex facts! What I like the most is that it is hints at more favorable evaluation of why Nuclear Power is so compelling comparing to previous "is nuclear green", which showed "glass is half empty" view, with several questionable sources. Scientists do evaluate facts and also change minds! In the energy storage field there are many startups, ideas that are very controversial. For example Gravity energy storage (the concrete block towers) shown in video is most certainly scam aimed at exciting investors. It is not exactly "theranos" kind of thing, because science of E=mgh is clear cut, but impracticality and materials needed to make it work are so unreal that I cannot believe that it can be sustainable. Quick calculation shows that 1ton of mater pulled up by 40m can store only 0.1kWh of energy, while 1ton of water heated/cooled by deltaT of 70C stores some 81kWh of heat/cold (and we need heat and cold in many places in the world). Gravity storage is only for places where delta h exist naturally as well as access to water and minimal building/engineering is needed.
@Nathan black do you mean like using a heat pump to heat out of the ground
Sabine, there is pumped hydro solution without mountains: *shallow sea pumped hydro.* 10 km perimeter gravitational dam in 100 meter deep sea, could store up to 108 GWh of energy...
Good thinking! A variation on this could be to somehow take advantage of the high latitude tidal △.
@@TheRealJamesKirk Yes, when tide overlaps with demand cycle. Also, that same dam construction, could be used for wind turbine placement around and sea surface within "accumulation" *(it is more like depletion, because pumping would evacuate water from it)* for floating solar panels.
Have you seen the environmentalists react when you want to build a water reservoir, desalinasation plant or a dam ?
How do you imagine they will react to a much larger version of a similar object?
I found the video informative. I had worked at several pumped, storage hydro units in the USA. Also, I had been at the McIntosh site that was mentioned in the video. The unit is actually a gas turbine with an electric machine between a compressor and a turbine with a combustor chamber. During storage the electric machine is clutched to the compressor and separated from the turbine. Air is pumped into the ground for storage, and this is done when the grid load is light, usually at night and on weekends, while the cost of electricity is low.
For generation, the electric machine is clutched to the turbine and separated from the compressor. The compressed air from the ground is mixed with natural gas (the fuel) in the combustion chamber to develop the power for the turbine. The idea for this design was an economic one to save on the cost for burning fuel required for compressing the air of a conventional gas turbine.
Thanks for another great video. My sitting next to me doing her own work comment about your clear and concise delivery. No nonsense.
In about 2005 I was part of a team for a project to be used by the Australian military. The system used various mobile radio towers and had to operate for 14 days on stored energy.
That was when I learned that Australia had stated that solar systems had to be prepared for up to 14 days of a lack of sunshine. Only happened infrequently but was unpredictable.
I also looked at various systems including hydrogen. Ultimately chose some lead acid batteries with a diesel generator that ran for a few hours a day.
When at home I wanted some energy storage I thought about a concrete weight. A simple calculation told me how impractical it would be.
Modern flywheel storage uses large flywheels, in vacuum, with magnetic bearings. Storage losses are about 2-3% per month, which is pretty good. Cost is somewhat better than lithium batteries.
Alaska uses a lot of flywheel storage for load balancing. Due to the large distances involved, there are a lot of micro-grids instead of one large grid, so power has to be balanced locally.
Not just "pretty good", rather illusional. 2-3% per hour is more realistic. And it's not cheaper than batteries, but faster than batteries and cheaper than capacitors and for that reason preferred for load balancing.
What are costs per kWh?
@@artuselias That sounds plausible for normal flywheels, but high for a magnetic-bearing flywheel in vacuum. Wikipedia mentions one from 2013 that claims 5% per day, but the source is a RUclips video in German, so I can't evaluate its credibility.
en.wikipedia.org/wiki/Flywheel_storage_power_system#Energy_loss
@@danwylie-sears1134
The researcher in that video is credible, but that number is meaningless without context. They are talking about superconducting bearings.
Here is a real-life example of a magnetic-bearing flywheel in vacuum:
www.bves.de/wp-content/uploads/2016/03/FactSheet_mechanisch_Schwungradspeicher.pdf
Self discharging rate is about 5% per hour. Investment cost is estimated at 6000 € per kWh.
Decreasing one without increasing the other one is hard.
@@artuselias Exactly! Flywheels are terrible for long-term storage. Their energy density is s***, but their power density is great.
Hi, Sabine. Have you spent any time researching recent developments in geothermal energy extraction and conversion, such as deep, closed loop systems? I would enjoy hearing your thoughts on that subject.
Me 2!
10:55 The Cost of a Lithium-ion battery (not a storage system) was USD 211 per kWh in 2018 and USD 139 per kWh in 2023.
You are the gold standard for your explanation Sabine!
That's cool, expect that her explanations are false. ;-)
@@schmetterling4477 What about you tell us the truth now?
@@badouplus1304 What good would that do for you? You are a smitten kitten without a single skeptical fiber in your body. ;-)
@@schmetterling4477 Wow, from one quick question, you seem to know everything about me now. From your answer, I will conclude you are a troll.
@@badouplus1304 Internet trolls are all the same, Dear. They went from failing in school to failing in life to failing online. ;-)
Thank you for always making science fun, easy to comprehend and endlessly entertaining! Love you, Sab!! 💜🐼💜
Lol, if you think she makes it easy to understand, the opposite is true. She is a living abstraction, can't make anything clear.
@@laurenth7187 I disagree. And if that's how you feel, why do you patronize her channel?? Now THAT'S an abstraction.
@@EhrisaiaOShannon Sick burn. Couldn't have said it better.
Indeed!..Thanx Sabine for delivering this informative podcast on this crucial topic. @ Elon Musk; pls HIRE this superb German scientist for the coming decade; she can save you a lot of time on all kinds of innovative solutions you might ponder on! As for the energy discussion. The entire discussion about fossil fuels and storage can be solved by a global switch to Thorium LFTR nuclear energy as China is doing coming decades. There is enough Thorium on the Earth surface (no need to mine) to power the entire Earth cheaply for 3000 years. Norway has plenty of Thorium to cover all of Europe for centuries. With all this power you can produce unlimited amounts of hydrogen as storage for planes and ships. Next additional solar can complete the mix for households and EV's. The entire discussion is SOLVED. Why don't we do it? Long terms waste issue? no! Thorium radioactive waste is only a fraction of a nuclear power plant and has a halftime of merely 500 years as opposed to 10.000 of current uranium waste isotopes. Safety issue? nope! LFTRS are inherently save by design. Technology issue? Nope! We already had a working Thorium power plant at Tennessee Oak ridge in the 1960's!. It seems we have completely lost our minds by not even discussing thorium but instead wasting billions in dreams of unnecessary nuclear fusion. Time to wake up all NGO's who only are advocating woke GINO (green in name only) society disrupting solutions, leading to current increased dirty coals and wood burning energies. Again we have a choice. Fosil fuels can be a thing of the past within a decade if only we embrace Thorium. period.
@@laurenth7187 huh? What did you not understand?
A typically thorough examination of this conundrum. Thank you.
Brilliant Sabine! You shine like the sun spreading light and understanding. Well done.
Thanks Sabine, I have been anti nuclear energy my whole life. I’m 61. I’m also an Australian Green Party member, where, ‘Nuclear’ is a dirty word. I believe that nuclear energy is our best hope to produce enough energy to power everything and is do-able right now. Thanks for the information and the clear, concise way you present it. Cheers.
Another awakening Greenie... Watch Germany and California to know where this is all going.
Actually, it's not really doable like you think.
It takes a long time to build a nuke plant.
Fact is, you can build a lot more energy output of every type of renewable for less money, and in a lot less time than nuclear. Not to mention companies can't get insurance for a nuke plant.
Sooooo, we the people bear the costs if anything goes wrong.
Pay attention now.
We have to pay for all the bad that might happen, while the company makes a damn good profit, that it gets from us.
Nuclear accidents are quite common. We've been pretty lucky so far that we've only had 3 bad ones.
And BTW, chernobyl, 3 Mile island, AND Fukushima we're all caused by the same thing.
Humans making stupid decisions.
Three Mile Island had an actual problem. The computers were doing what needed to be done to shut it down safely. Humans decided the gauges were wrong and jumped into the middle of it.....
Chernobyl happened only because humans decided it was a good idea to run the riskiest test they had, at the absolute worst time to do it .....
Fukushima only happened because a room full of supposedly intelligent and educated people thought it would be a great idea to place a nuclear plant right in a combination earthquake AND tsunami zone.
Not only that, but they thought it would be just a great an idea to place the diesel powered backup generators, and their fuel supply, right down on the ground.....
We aren't remotely ready for nuclear. Not because nuclear is dangerous, but because humans make too many mistakes.
If your goal is to get off FF, nuclear is the slowest way to do it....
Not to mention that with nuclear, you're either going to have to store energy, or keep using natural gas peaker plants.
Nuclear only works as a "baseload" power source. The amount of electricity used, and where it's used changes drastically throughout the day and night. (Seriously, look up how much we have to move FF made electricity now)
AND since the most expensive renewable, with nighttime energy storage, is cheaper than the cheapest FF(and FF are cheaper than nuclear) I don't see a long-term place for nuclear.
Never mind that even the new nuclear requires about 500 years of waste disposal. We have absolutely zero experience storing dangerous things for hundreds of years. That will be expensive, dangerous, or both, depending on what we do over that 500 years .....
ALSO, renewables, while being cheaper, than everything else, provides massive jobs.
Right now in America, 63% of electricity comes from FF. That 63% gets us a little under 900,000 jobs
Solar is just 3%(2.7% actually, the charts all round to nearest whole number) of electricity production, yet it provides just over 500,000 jobs...
Multiply that 3% energy by 21 to get the same as fossil fuels, and you get 10.5 million jobs.... For less money.
Of course, things don't multiply quite like that. So we could probably only expect 8-10 times more jobs(4-5 million) for solar.
@@lordgarion514 Wow, couldn't make it past the first chapter of your book to realize the rest must be nonsense as well. China and South Korea have been building them in four years. Many other countries have been building and using small modulator reactors for many decades in two years or less for millions not billions.
@@danadurnfordkevinblanchdebunk
You just like making shit up.
Smr have not been used for decades.
And I know how long it takes to build a nuke plant. AND you can build more renewable power, in less time.
And those small ones that cost millions, not billions?
Yeah, they tiny little things. If you multiple the power up to a full size nuclear plant. It's still billions.
And no matter what the smrs cost, renewables are still cheaper and provide more jobs
@@danadurnfordkevinblanchdebunk
And when I say smrs haven't been used for decades, I'm talking about on land.
The US Navy has been using them for decades on ships.
AND they cost billions.
Having revisited this vid for a context fresher... I am reminded of just how much of a treasure you are. :-)
If you have considered doing updates to existing content, I vote for an energy storage update (and a practical antimatter vid/update) :-)
*Why you don't have 10M subs is a depressing reminder of how few people are actually interested in understanding the world around them.
Energy, both generation and storage is a much more complicated issue than I ever thought🤯
There is also hydro. You need elevation, a temperate climate and a reliable river system.
I WAS an Engineer Technician for a green energy R&D think tank. We built a CAES system using shipping containers to ease transport and deployment issues. It worked so well and was so efficient we scrapped that project and moved to thermal energy storage. That can is still being kicked down the road to this day but the death knell is on the horizon. So much that we moved on to carbon capture. ... and because of this I so too moved on but you should see our impressive stable of unicorns!!!
That CAES sounds like a great idea. What happened to the IPR? Can it be made available?
Sabine has the ability to understand what we need to know. I will have to watch this many times to let the facts sink in. It would be helpful if she could publish “cheat sheets” for each video with the salient numbers.
Thank you for the ever-informative, non-apologetic load of science made accessible. IMO, you're the #1 pop-science source out there
It's pop, but it's from the canon of physics and engineering, as Sab's fans know. Carl Sagan would be proud!
is she really unintelligent enough to believe in the man made climate change hoax or does she go along with it to help her own popularity on youtube?
this video is not informative, its not even disinformative, its plain deformative. it deformed my opinion of her. look its all crushed and broken now.😫
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute.
@@termination9353 You may want to look up applications of flywheels: energy "stored" with angular momentum.
@@brucegoodwin634 But I'm not talking about the use of any flywheels. Just simply the unwinding of a spring through it's axle and geared to turn the wheels. What flywheel? Maybe a flywheel can be included to increase the efficiency or allow the vehicle to coast longer with the motor off or something.... but what i'm talking about is strictly the spring tension motor compared to an electric motor and battery.
Dude, I saw CöldDünkelflautte open for die Glühbirne on their Toxic Fist tour in '17.
You read my mind!
I've been wondering about this for weeks and finding very few answers. Thank you Sabine 😍
One of the key takeaways when you are looking at all of the costs of producing, storing, distributing and using energy is that energy efficiency is crucial.
O yes, I agree! Problem is, high-level decisions are mostly based on ideology and not on the facts.
When the wind stops and the sun is hiding, you need base load power… better have something in reserve…. Nuclear, biogas, Ethanol, coal….or a big ass pumped hydro dam pair….
One of the takes aways for me was that we need to use geothermal storage to heat our home rather thatn using electricity or hydrocarbons... oh and go nuclear!
@@surrealsurrealism Actually just a simple old fashioned hydroelectric dam works as storage - when the grid has wind or solar it winds back and then winds up when it isn’t. It’s renewable energy too.
@@guybuller1358 Actually you could go geothermal to heat your home tomorrow - drill a 100 to 200m hole in your backyard and drop a coil of tubing in it. The ground heat will be sufficient to heat a moderately well insulated house.
Almost any estimate for Energy Vault's efficiency will be overly optimistic. Yet another informative and well presented video, thank you.
Flywheel, lifted weights or elevated water seem a start. You've such a pleasant voice Sabine, quite nice to listen.
Excellent video that puts the renewable energy into a proper context.
Energy storage really is the '3rd leg of the tringle'. Wind and Solar are well established, and are very economical sources of electricity. Without electrical energy storage, those intermittent renewable sources can only amount to ~20% of the energy portfolio, without creating instability in the grid. After that, they become more of a nuisance than a help, because of generating stations having to 'chase' the random extra power on the grid. They can't respond to sudden changes, like a portable generator with a governed engine.
If somebody made a "Sabine out of context" super special, there's be hours of material by now. I love it!
24 TW/h!!!!!!!
Yeah this has the energy of a potential collab with ElectroBOOM!
fUUUULLL bRIDDDGE rEECTIFIAAA!!!
Peter principle lives!
DUNKELFLAUTE! You just made my day. Thank you for this word. 😀
And it ruins my day. Alone the need to talk about this in 2022 is the ultimate sign that german politicians are f**ing up the whole country by woke Idiotism...
You know the Germans, always helpful... 😄
Great word. And not limited to Germany. Here in the Pacific Northwest we get them too. One I kept track of last winter was eight days of dead calm and heavy overcast. The solar panel on a remote tank level transmitter put out 1/14 of its summer time rating, and the days that time of year only last for 8.5 hours, and you probably lose another hour at each end due to horizon clutter and haze.
And it's cold of course. So my all electric house takes 60 kWh per day (yes I have a heat pump) and you can do the math to find the combination of PV panels and batteries to get through that.
One of the pleasures of travelling to German speaking countries is to hear and see words like Dunkelflaute. Of course, being Australian, I have appreciated this ever since I saw the word “Ausfhart” on an Autobahn sign.
@@gregessex1851 "Ausfahrt" 😉
One item not mentioned is power dams. Dams can be used as batteries. Similar to pumped hydro just without the pumping. Use whether forecasts to predict demand requirement. Use the power from dam when other renewables are not available.
Huge thanks for this video! This is the topic I've been awaiting for very long, extremely informative.
Best idea I heard so far for Germany is to build large hollow sqheres at the bottom of the sea or lakes that are equipped with turbines which generate power if the water above fills the sqheres thus generating electricity. If energy has to be stored, then the water will be pumped out of the sphere. So we have pump hydro system without the problem of finding an appropriate location. But even better: in Germany we have the 'Hambacher Loch', a huge area where coal has been removed and now there is a hole which is about 450 m in depth. The idea is now to build these spheres at the bottom of this gigantic hole and then fill it with water. Calculations seem to show that this could solve the storage problems mentioned with 'Dunkelflaute' for Germany completely. (Distribution problems with the grid not taken into account). Industry (RWE) is interested and I hope that they will realize this project in the near future. Whats nice about it: no 'rocket science' required and first projects in the 'Bodensee' already showed that it works well, no 'bad surprises'.
This is a very interesting idea. Can you share any white papers or links to read more?
Interesting, what's the impact to and by flora and fauna?
Loved the video. THanks for talking about all the storage options in such a well organized way. Typical Sabine. What should be brought up is that with wind, solar, and storage we will soon get a situation where we have superpower when there is NOT Dunkelflaute. In other words, power will become incredibly cheap. We have already seen this in Europe where they were GIVING power away to ditch the extra power. I would LOVE to see a video on that Sabine. You are my favorite science educator. Thanks!
Well you are right; the problem is if we really expand the generation of solar and wind a lot (so that for example we are able to produce the total electricity used in Germany in one year), then we are talking about *extreme* superpower (5-10 times of what we need at a particular moment). This means power will not become incredible cheap: It means we have absolutely no clue at all what to do with this power. Prices either will get extremely negative (hey you take 1MWh: I will pay you 500 EUR if you do!) or we simply have to shut down all this nice solar plants/ wind parks. In the second case the problem then is, that we *do not* use the generation potential efficiently, which will in fact increase prices, at the time we do need the power.
So no: "Superpower" is not something I am optimistic about.
@@lundril I don't think switching off wind turbines and solar panels temporarily is an insurmountable problem. By my understanding they already do this. Over time, I think the economics will partially address this issue - anyone with an electricity-intensive but discretionary task (industry mainly) will shift processes around to cash-in on electricity when it's cheap.
Sabine, have you looked into Ambri which store electrical energy using liquid batteries, cheaply according to MIT professor Dr. Donald Sadoway, dirt cheap.
His MIT lectures on solid chemistry are unique.
(The most impotant class, at MIT)
Great video! Good balance between sharing information and humor.
One of the early pumped hydro storage project (Tom Sauk reservoir) was built in the early 1960's about 85 km SW of St. Louis. The pumps were on during the night when the cost of electrical power was cheap. It generated power during the day when power was more expensive. The reservoir failed in 2005 but was rebuilt.
Niagara Falls has been pumping water at night since it was built in the 1950's. They're allowed to take a larger fraction of the water at night and in the winter when fewer people are visiting the falls.
@@bcwbcw3741 Pump it where? No reservoir.
Edit: oh, man made Beck Reservoir. 8 hours deep
Sabine, this is a really helpful summary however my point would be, if that generated energy would go to waste anyway (I’m talking about curtailed energy production when the grid is already in surplus) then we shouldn’t really worry too much about the efficiencies too much. Some storage is better than nothing. Dunkelflaute? Two days a year? Two days. Nuclear base load: get some SMRs set up. These can be built relatively quickly.
It's zero days a year if there is enough surplus capacity to support a hydrogen economy in addition, which would make chemical byproducts like fertilizer, synthetic aviation fuels and synthetic foods incredibly cheap.
I would love a follow up on the environmental/health cost of battery manufacture/ material mining.
It would be interesting to include Lithium IRON batteries in the mix. I use these in my home solar system to store about 10 kwh. They have a much longer life then regular Lithium Ion batteries. I think your videos are great. Thank you.
Also Sodium ion batteries.
I also expected her to mention lithium iron phosphate, since we're talking about grid storage.
Batteries. Bruv
Cheap as well. More in the $100/kWh on the pack level right now, certainly not 400 and, because of massive production increases, will continue to drop in price. I think the main thing holding Lithium batteries back right now is scarcity.
Also flow batteries.
I loved the video! Your comparative costs are very informative, but I believe the energy units in the comparisons should have been megawatts instead of kilowatts.
Great presentation and subtle (sometimes) humor. The only thing I would add is to look at LFP battery storage which supposedly is cheaper and last for many more cycles. I confess to being a Tesla fan.
You’re right here to keep eyes on LFP. It has potential to provide $30/kWh cost as BESS with 6 hour profile. Add the high cyclicity (10.000 cycles) and long calendar life (20-25 years) you end up with very low storage cost.
Excellent presentation of the options available.
This is so wonderful! I've tried to communicate all of this to people around me without all the nice numbers and graphs!
I will use this video as an aid in the future! Also I might strip some technicalities from my own little TED-talk because I think it takes away from the big picture.
I am so happy! :)
Note she is using outdated numbers to support her narrative.
@@MarcoNierop outdated numbers or not, when the differences are this enormous it is not just a matter of improving/building out. Also "fixing" something like the tilt of the earths axis is simply not doable.
I used to be hopeful and followed the advances in solar technologies very closely (multi quanta, piezo electrics at night, ...) but I've kind of lost hope for where I live. Further south it can/and was something for individuals - but it just doesn't scale very well when everybody needs batteries.
Compressed air is an extremely complicated energy storage system. The most efficient solutions have a way to save the heat generated during compression, and then use that same heat to heat the extremely cold air during decompression and power generation.
That is really key to make CAES viable, yes. Without it and using NG-powered heating systems on the discharge cycle, efficiency is rather meh and the carbon balance quite terrible. Could maybe use the heat from a nuclear plant, but then may as well use that NPP's energy directly instead of bothering with CAES :)
Liquid CO2 as the gas cycle has the benefit of not needing to be cooled to extremely low temperatures like liquid nitrogen/air systems. It can be kept at ambient temperature indefinitely without spending power to do so. It’s also easy to keep contained in a sealed system with almost no leakage.
@@hugegamer5988 you didn't understand me, the problem is that when gas is compressed, a lot of heat is generated, and vice versa, during decompression the gas cools down whole sistem - if you allow the heat created during compression to go to waste, the system will be terribly inefficient, because you will have to use energy for heating during decompression. (it doesn't matter which gas it is, this problem is present)
Think of a can with compressed air or paint, while you use it the can cools down terribly, if you don't warm it with your hands, the pressure will drop and you won't be able to continue working...
@@goranjosic I understand l. I have a masters in mechanical engineering and this is a high-school level understanding level video at best. The heat is captured upon compression and released upon expansion to increase the efficiency in both cases, and it is significantly less loss for the CO2 over nitrogen. Isothermal expansion isn’t efficient, it’s a free lunch you get when your environment has a ambient thermal reservoir or in this case, stored waste heat energy.
The tulip wind turbines are pretty good even at low wind but for my money, the advances in drilling (using heat beams) means geothermal is the right decision and will get better as the cost decreases. Some neat batteries coming, liquid metal batteries and such.
Very thought provoking presentation. Thank you!
Hello and thanks for the video! I must say that I’m a little bit confused by some points. Maybe others understood them better, but I’d need some more help to wrap my head around.
1. Could you indicate where the figure of over 1PWh storage capacity comes from? Not at all arguing it is wrong, but it feels like such a figure needs a lot of context. Indeed, the needed storage capacity heavily depends on how often you charge and discharge your battery. In the case of lithium-ion batteries, this would be approx. once a day, but in the case of hydrogen storage (or the example from Finland), I believe it makes much more sense to store energy over longer periods of time. So between those two different models of energy storage for the same capacity, you easily have a factor 10 in stored energy per year.
2. @13:52, I find it weird to compare the energy densities of fossil fuels with the capacity densities of lithium-ion batteries. One is single-use and the other can be charged over and over. Or am I missing something?
3. The figures at the end concerning the carbon footprint of energy storage seem to be specific to lithium-ion batteries. Although after having re-watched the segment it becomes clear, I think it would have been nice to state it clearer. In fact, I’m not an energy expert, but it seems reasonable to expect that for pumped-hydro this figure should be much lower, as well as for storage systems like hydrogen (as you only need to build the electrolyzer, the gas tank and the fuel cell).
Good points! What I'm also missing: CO2 footprint of batteries comes from manufacturing, only. Given all energy sources are carbon-neutral in some future, manufacturing batteries becomes carbon-neutral as well, making batteries a clean storage option. Same thing for about all other storage options.
The second point is just about transport efficiency,you need more kg of batteries for a certain task than fossil fuels,which also makes the task take more energy
And it also applies to mass-storage in some scenarios.
(2) Carbon based fuels are not necessarily single use, if we could figure out a way for both fusion energy and reclaiming carbon from the atmosphere then we could use the massive amount of carbon based stuff we already have such as cars and then reclaim carbon from the air to create fuel again using the energy from fusion reaction. That would be the most viable short term (less then a hundred years) solution since we all know that many poor countries in the world will continue to use carbon based stuff like huge amounts of existing old cars. Also current cars using carbon based fuel are much more secure and efficient than these battery based electric cars. That would also be a way for rich countries to solve the problem of global warming while not giving away their technological secrets which we all know they don't really want to so for many decades in the future some countries like Venezuela will continue to blow carbon into the air.
@@HansPeter-ft9hx Modern electrolysis technologies are quite a bit better, generating hydrogen at some 80% efficiency. Some eben claim 90%+ on the laboratory table. As this will be a billion dollar business in a couple of years, there's a lot of research going on, of course.
@@atomtamadas Battery EVs are much more efficient than combustion engine cars. The latter waste most of the energy as heat.
Good video. Imho the efficiency numbers you put on some things are optimistic. I think they exclude conversion efficiencies for converting for example electric to pumped hydro and back. 90 % on each conversion is fantastic so 19% at least is already lost on that alone except for the rare case you do not need a conversion.
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute.
@@termination9353 Absolutely. And it's done. For mechanical clocks, car break systems absorbing the kenetic energy and releasing it when pulling up. May others. The problem is the energy/(cost and space) ratio is low. Remember your toy car using a spring or friction motor ( if you're young probably not ) ? It would run 30 seconds maybe. Remember your battery powered one ? It would run half an hour.
@@hanslepoeter5167 Wrong - I could wind for 5 seconds and get a few minutes run time. And a windup windmill/pinwheel atop a pen that winds in 10 seconds but goes on for 5 minutes. And remember these toy motors are not designed with any actual usage in mind. If the problem is come at with designing using the springiest steel that releases high torque with many spring coils arranged in series.
Your ideas of efficiency on paper do not necessarily correlate with efficiency in all application in real life. Your paper efficiencies do not take into account charging times nor weight if the motor is to be used in lugging itself around (with passenger) instead of idle on the floor.
Even if you were to say the electric will give me a bit better distance than my tension motor - it's not efficient in the long run if I have to wait hours to continue my journey when I could take a shorter distance with only 5 minutes wait time in between.
And then also, where is there any efficiency when thousands upon thousands of used up two-hundred-pound batteries need to be disposed of? They are going to end up being dumped in the woods like what happens with tires when nobody wants that shit. BATTERIES ARE 1000 TIMES WORSE noxious and toxic.
@@termination9353 Technically I did not talk about efficiency in the comment you refer to. If you talk about efficiency in solving the problem then sure, you make some interesting points. But I simply do not see a solution in the form of winding up your Tesla and drive for a 100 km. Using current materials. I don't think it can be done. Charging the battery and drive 100 km in your Tesla is common practice.
@@hanslepoeter5167 "Charging the battery and drive 100 km in your Tesla is common practice."
Common practice for who? The wealthy who can afford a Tesla. A tension motor would be hugely cheaper and affordable to the average person. If the industry were to put out such a much cheaper tension vehicle that a greater portion of the public can buy one, even if it only gets 50 miles on a charge but a mere 5 minute pit stop to recharge (in a 200 mile drive which would get there sooner the Tesla 100 mile range with long charge time or the tension motor 50 mile range with near instant charge time?) then the tension motor will be the "common practice". (The actual common practice today is electric bikes of only 20 miles pedal power assisted. They are selling like hotcakes cause the average person can afford it and are willing to make due with less distance on a charge - should try a tension motor pedal power assisted bikes as well).
The phrase "site specific" is very useful. In general, the best option for both generation and storage will depend on where you are. The more options, the more likely your location will have resources/conditions which makes one of them a winner.
BTW: Energy density (either per mass or volume) is much less relevant for this topic.
one size fits is the mentality.
My biggest worry is that the energy production we think we need now will be very much under-estimated because of climate change. For example it's very clear we'll be running far more AC than we do now. Which takes up a lot of energy. And building, transporting, etc. those AC units will probably also create CO2. The droughts will probably mean we'll have no choice but to start doing desalination, an other bigger energy user. we will also be creating lots of climate migration and thus we'll have to build more homes, again more CO2
@@autohmae AC doesn't produce CO2 If you aren't using fossil fuels in the grid.
@@bozo5632 I meant for the production of them. The manufacturing process might.
@@autohmae Most manufacturing doesn't have to produce any CO2.
Sabine, thank for your informational and trustworthy video. What annoys me, is that everybody is talking about reducing emissions from cars, but hardly ever speaks about pollution from burning wood in a stove at home. Very cosy, but it fills the whole neighbourhood with smoke, from which it is impossible to escape and which is intoxicating me which I really don't appreciate. Can you do a video about this subject?
Applying my participation 🏆: H2 storage seems like a great methodology, because it could work hand 🤚-in- 🖐 with solar power. Create excess solar capacity and divert the excess to water electrolysis. We might even have large membrane units to convert the H2 back to electricity so as to avoid the energy losses to heat if combustion was used. Just don't use H2 in cars or attempt a network of H2 distribution for transportation needs.
Agreed. Hydrogen is the answer. Produced by excess renewable capacity in the daytime and then used at night. It could even be made from simple hydrolysis of sea water.
Depends, storing hydrogen is a pain, and fuel cells are complicated systems with a short lifespan. I think the cost estimate given in this video is rather too optimistic.
Using the electrolysed H2 ('green hydrogen') for industrial processes makes a lot more sense than to use it for energy storage. At this moment green hydrogen is far too expensive compared to NG-derived hydrogen.
@@MayaPosch Again it depends, if localized industrial processes must equipped to consume H2 in addition to electricity, then that expense could considerably outweigh the cost of H2 storage. But I do agree that H2 storage is "a pain." The tiny molecule gets past many fittings; monoatomic hydrogen (which can exist temporarily due to collisions or reactions with vessel walls) will diffuse through layers of steel and can get trapped as H2 in pockets of steel; leaks are hard to find; and if there a leak that has ignited, it burns with an invisible flame. But H2 is stored all the time because these risks can be managed.
@@tedlis517 Hydrogen is commonly used in industrial processes, such as the steel industry. There they use fossil fuels as the primary source at the moment. Currently hydrogen from electrolysis is not competitive yet. See e.g. Swedish 'green steel' as a recent trial run.
Hydrogen is indeed very annoying to store. It'll cause metal embrittlement and can ignite when mixed with air anywhere between 15-75% hydrogen, resulting in a very violent explosion if an ignition source is found.
Hydrogen storage is usually done in wrapped carbon fibre vessels that can store hydrogen at very high pressures, but these vessels only last a few hundred cycles at most before they have to be replaced, and require constant inspection for flaws.
I guess hydrogen is rather like ammonia that they have their uses, but handling them is anything but pleasant.
@@davidb2206 "simple hydrolysis of sea water" LOL
Thank you. I must say, however, that the cost information you provided was confusing. There is the construction cost of setting up a storage mechanism, and then there are ongoing costs of operation. I didn't see these clearly distinguished. Maybe you mean the efficiency numbers to represent implicitly the ongoing costs of operation?
If Sabine is being as attentive to detail as she usually is, my guess is that she's including the construction costs (monetary and Carbon) over the lifetime energy production/storage, which can be distilled into one number. For instance, if it costs $100 to build, and $1 per kWh to operate, with a lifetime of 1000 kWh hours, then the total is 1 + (100 / 1000).
@@coder0xff I guess you may be right. But she didn't really say much about the useful lifetime of anything other than lithium-ion batteries.
The cost provided is the capital cost to provide the capability. in $/KWh. The cost added to the electricity is the amortized cost over the lifetime of the storage system. If a battery system lasted 1000 cycles, a $400/KWh battery would add $0.40/KWh to the cost. An 80% energy recovery would add 20% more. If 10% of the energy has to be stored, the additional cost overall would be 5 cents + operating costs. But if 50% has to be stored, 25 cents added. The present wholesale cost of my electricity, before distribution, is 3-4 cents.
The one major cost left out -- the elephant in the room -- is the long-term cost of dealing with nuclear wastes.
@@davidb2206 No. storage is a negligible fraction the total operating budget. Today store spent fuel rods are a potential supply of unused uranium, too expensive to extract compared to virgin uranium, at least in the US - France does reprocessing.
Antimatter should've gotten the most insanely expensive idea award. Cost of producing 1 gram of antimatter : $62.5 trillion (USD). Even so, it's an extremely appealing approach. It gives us unlimited opportunities to panic and yell with a Scottish accent (like Scotty from Star Trek). "Capt'n, I d'not think the engines can take any more. They're gonna blow! "
We need dilithium crystals 😄
Storage is tricky too
The real issue isn't even the cost. It takes a ton more energy to create antimatter than it would give us back.
Use Higgs Boson to make things less heavy (for less work) or heavier (for example to use gravitational energy). Or a graviton maybe🤷
I like nonsense too.😀
I sense some skepticism. See, the problem with the CERN peeps is that they haven't yet bothered to reverse the polarity. Just do that and, like, endless power man. If it's good enough for Scotty, it's plenty good enough for me!
Thank you for this glimpse into realities
I just have a minor thing to add here which should be taken into consideration regarding the CO2-emission estimates for renewables+storage.
The estimates are usually based upon a snapshot of the respective industrial processes of which are involved in making of the used materials and products etc. In other words they are relevant for this moment in time as many of said industries have not yet undergone a "renewable transformation" (for a lack of better words). This transformation will look different for different industries, for example in steel manufacturing there's an inherent CO2 emission process through chemical reactions, which is now being adressed by using hydrogen instead.
Many of these industries are electrical intensive as well, meaning that the current emission ranges are based upon the current electrical grid composition. So, in different places of the world, different final emissions are to be estimated. It is also vert important to mention here that in a scenario where we rapidly expand renewables + storage, we can therefore expect the final emissions of the products used to be lower and lower as there is a synergistic effect. Increasing the storage and renewable capacity leads to lower usage of fossil fuels which leads to lower CO2 emission when creating the products used for renewable generation and storage.
Tell that to the people under the topcomment
Despite the fact that you didn't even say "Einstein" even once, it was still a really great video. Thank you!
you mean Einshtein
You can use ein stein for gravitational energy storage.
😄 she needed to explain where the 25 TWh figure came from.
That guy again?
@@alexeiboukirev8357 I believe multiple steine would be better, though.
Thank you for such a well articulated and informative summary of these issues we must deal with. You're a living legend, Sabine!
Why are you telling all of us that you are absolutely clueless about the issue? :-)
@@schmetterling4477 I have no idea how you came to that conclusion from my comment.
@@bluecheese1066 Because you said that Sabine's information is informative. To everybody who is actually informed she is a simple bullshitter. ;-)
@@schmetterling4477 How about you post your own video then, mate, so we can all learn from your infinite wisdom. Paste a link when you've done it. Cheers.
@@bluecheese1066 I am not a bullshitter, kid. Absolutely nobody would watch an actually well researched video full of facts. The algorithm only promotes trolls like Sabine because that is exactly the kind of bullshit that your kind wants to see. ;-)
Thank you for your work.. Very useful..!
❤❤❤❤
Excellent video with the conclusion is that we must seriously consider nuclear power.
Thanks Sabine.
Agree
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute
This is an issue with storage that is often difficult to get across. With 24 hours worth of storage, solar and wind can fully cover maybe half the year. With 2 days of storage we get another 3 months, leaving 3 months worth of problems. With 4 days we still have 6 weeks of problems. With 8 days of storage that drops to 3 weeks. With 16 days of storage that drops to 1 week. I'm not using real data, just illustrating the asymptotic nature of the storage problem. Because the cost equation makes implementing 16+ days worth of storage untenable,. let alone any more. The sweet spot for utility-scale storage is somewhere in the 7-day range.
But this whole problem changes when we add a little base-load back in, and that's the part that I think most people don't understand. With just a small bit of reliable base load, the storage requirements are cut in half. And with a bit more, they are cut in half again. It is possible with just the addition of a modest bit of nuclear to make renewables the dominant energy source on the grid.
But adding base load back onto the grid has its own problems. Right at this instant, base load is not a good fit because there is no steady demand. Everything is on a daily cycle and base load sources such as nuclear have real problems cycling that often. It just isn't economically workable. But once batteries are able to bridge 24 hours, that whole equation changes... then batteries can charge during the day, discharge the rest of the time, evening out the generation requirements. In THAT scenario, base load winds up being economically sound again. Not only economically sound, but having base load on the grid at that point greatly reduces the additional storage required to make the grid reliable 365 days a year... from several weeks worth of storage to just one week worth of storage.
Good points. Now, if the base load capability can be partly to largely replaced by slow, "old" simple, cheap tech, like sand batteries, etc, then things look very promising.
At the margin, having a lot of high tech, fast, flexible, LI, etc. batteries is needed. But for the multi-day storage, we can be far more creative and really help the overall cost base for green energy storage.
Essentially you'd have renewables whenever available, nuclear to support long-term dips in generation like the off-season, and storage to cover both daily fluctuations in demand and up to roughly week-long dips in generation (which also buys nuclear time to adjust.)
If that reliable baseload power is advanced nuclear, you don't need intermittent electricity sources in the first place. It can't be our current nuclear tech, it would have to be the advanced reactor design that are in the licensing phase. They will be no more expensive than a coal plant and safer than our already safe reactor designs.
@@chapter4travels I agree that we should use as much nuclear as we can, however right now it's hard enough to stop people from decommissioning nuclear, let alone switch to a full-nuclear grid. I'll settle for some.
@@Racnive If the goal is to replace fossil fuels, then we have to wait for advanced nuclear because wind and solar can't replace fossil fuels, they can only make them more expensive. If the goal is to feel good about ourselves, then wind and solar are wonderful. Crazy expensive, but wonderful.
excellent presentation, I'm in the RE business so I can appreciate the rigorous approach with numbers. However when comparing energy content of different sorces (13:15) you should mention the big difference between chemical electrical thermal and potential energy, all expressed in kWh but with very different usability
Great point as electrical energy has much higher efficiency potential even greater than 100% heat pumps as much as several hundred percent, whereas all the others have efficiencies lower than 100% percent.
Ive been following you for a while and I have always liked your videos. But you are getting progressively funnier, literally made me laugh out loud a few times.
It indeed hard to overcome the induced inefficiencies of conversion twice from a battery storage system (once to put energy in and then again while using said storage). Batteries only store DC power while we use AC because of the nearly lossless transmission.
Yep , I'm in the high voltage power distribution
this alternative rosy future leave me somewhat puzzled , do those people know what is involved
as we say " great concept....stupid idea "
"Nearly lossless"? Try 30-40%...
HVDC can achieve ~3% end-to-end, including conversion losses.
@@SafeTrucking Where are the 30-40% coming from? US?
Because Central Europe has losses of about 6%.
@@johnscaramis2515 Ah, that makes a difference. Central Europe only has short AC distribution runs, in general. Still, 6% is very low, I suspect it's nearer to 20-25, when you include substation transformer losses, although if they've switched to electronic transformers, that may not be the case. I'm not familiar with the European systems. Here in Australia, where lines run much longer distances, the losses are much higher.
The Chinese are running several VHVDC lines, up to over 3000km, with end to end losses, including conversion (using Siemens technology) of around 3%. We run HVDC from the mainland to Tasmania, under the Bass Strait, at lower voltage than the Chinese are using, with losses of around 5%, to connect to the large Tasmanian hydropower resource There is no possible way to achieve that sort of efficiency with AC.
The losses are minimal compared to fossil fuels, for example from the potential energy in oil in the ground only 15% drives the wheels of a car, Yes on average 85% lost in the mining, refining, transportation, and un-efficiency of the combustion engine. Compared to batteries that can be over 95% efficient.
I like the idea of storing energy in a very big tunnel underground. I hear there is just such a tunnel (circular as well) that goes underground between France and Switzerland. We could call the storage facility: Concentrated Energy Renewables Network or CERN for short. 🙂 Oh by the way great video, thanks very much.
underground is fine as long as the products are in sealed containers.
And if you wouldn't only heat the water in that circular cavern, but let it circle in one direction, you had the biggest flywheel on earth (26,7km / 17mi length)
😂😂
And physics will not be violated either! Perfect!
Thanks for another great video Sabine. But I am a little disappointed that you did not mention Tidal Power when discussing Renewables. Tidal Power is not subject to Dunkelflaute, as the tides still go in and out, no matter what the weather. All the Best, Paul C.
We've basically failed at producing tidal power so it's been largely abandoned.
The dual problems of the corrosiveness of seawater and marine fouling made the maintenance challenges effectively impossible to solve in an economic fashion, unfortunately.
That's why almost no-one talks about it anymore.
It would be great if that weren't true, as it would put a lot of power generation right where we would want it for desalination, but unfortunately it seems to be a dead end.
@@dynamicworlds1 And don't forget neap tides!
Rarely discussed are the Raw material requirements for energy storage. Especially the need for copper and other rare metals. Is there a enough mining capacity to meet the anticipated needs of developing both short-term and long-term storage capacities?
This is where low-orbit asteroid mining comes into play. It may sound like science fiction, but scientists are already working on it now. I can't wait for when we start to see this happen as it will drive us further into space exploration. A company called AstroForge already have 2 missions planned this year alone. Countries such as China and America will eventually compete to mine for the minerals.
very well done video. amazing how much energy we use, the comparison to antimatter shocked me a little.
i reckon if we do end up utilizing antimatter in our lifetime, it will be in an ultra-diluted form. like, think a ring of anti-particles spinning in magnetic field, definitely not a chunk of anti-steel.
Indeed. Like the difference between "No matter how do you store energy, just store it" and
"No anti-matter how do you store energy, just store it"
You did not mention liquid metal batteries. There is the US company Ambri commercializing them. They are supposed to be cheap, durable and scalable. Unlike for lithiu, the materials are ubiquitous and cheap. Oh, and they don't explode. 🙂
Lithium-ion is currently the only battery-type we produce on large scale since it's the most energydense and thus perfect for laptops, phones and EV:s but im looking forward to sodium batteries or other types of batteries built for grid scale where weight and size are not as important as cost.
Lead acid batteries work just as well for grid storage. They can store more power per unit volume than lithium batteries but are just much much heavier.
But that is irrelevant unless you plan on moving them.
@@allangibson8494
For relatively few years, unfortunately. Edison batteries last for several decades.
Excellent presentation sabene.Problem of power storage requires more creative ideas.Happy to see how much has already happened
Thanks for the analysis Sabine. Spot on, I agree 100%.
Unfortunately, many enthusiastic renewables supporters fail to acknowledge the storage issue. In particular as the percentage of renewables gets higher, cost of storage goes through the roof. Dirt cheap wind and solar are then no longer diet cheap.
Whilst I agree that the storage problem is underexplored, my response to the cost would be "so what?" Whatever the cost is it must simply be paid, one way or another, because the alternative is potentially irreversible ecological destrution. Renewables just aren't optional at this point; it's not a question of "if" but "how".
It's one of the most underestimed problems. Here in the Netherlands they push everyone to electric heating with heathpumps. I just installed solar panels last year and noticed how little they produce in winter. I will already have a 2MWh shortage in fall and winter and 2.5MWh over production in spring and summer. Moving to electric heating even with the high efficiency of heat-pumps will add another 3MWh shortage making a total of 5MWh I would need to store to become completly self sufficient. Maybe geothermal energy could help us through the winter, but progress is moving too slow in this area.
@@EdenLippmann "ecological destruction" as if CO2 is some kind of foreign alien poison? Wake up! Wake up!!
@@AndreVanKammen You live 1300 to a square mile there is literally no chance of you ever having a "sustainable" life. Meanwhile my people live 7 to a square mile and we are dictated under the same restrictions as you and sold the same environmental propaganda. It's very tiring you know. Maybe there is a limit to how much energy should be extracted from arbitrarily smaller and smaller areas of land.
@@tinfoilhomer909 Yeah, cause if I'm going to take advice from anyone it'll _definately_ be from someone who calls themself "Tinfoil Homer". Please, give me more of your no-doubt very _very_ well-informed opinions.
Greetings from Norway! I have been working in the hydro energy business and find your presentation very precise and to the point. Europe is now (at this very moment) literally draining the Norwegian resources (reservoars) and as you so clealy point out; the energy has to come from somewhere!
You would have thought that after the wet summer Bergen and the west coast just experienced, there would have been an abundance of water. But long term, I imagine that once the melting glaciers are completely gone, hydro will be an even more difficult option, not just in Norway.
@@not2busy it’s a misconception, the rain in Bergen generates zero energy! It just goes right into the sea.
Especially Germany, there destroying there own nuclear reactors.
Dunkelflaute!!! That's awesome! I'm going to be adding that to my vocabulary and dropping it on people. What a fun word!!! Thanks Sabine!
Germany's decision to go completely nuclear free struck me as a very odd choice. Never made sense to me. There seem to be some "green shoots" of hope for nuclear here in the USA, but there's still a lot of fear around it. Hopefully that will change sooner rather than later.
But please spell it correctly: "Dunkelflaute". You don't want to spread misinformation, do you? 😉
@@zaphod333 Thanks! I have a shirt that says, "I'm an engineer" mispelled several different ways and crossed out concluding with, "I'm good with math." I can't even get my own language right! 🤪
Exiting nuclear makes sense if you know the 20 years of propaganda in (Western!) Germany beforehand.
Nuclear energy in Germany - is done. It will not change :-( There aren't any engineers left that could actually do it. We would have to relearn it.
@@justinahole336 Misspelling as a mission! That's consistent. You're justified then. :D
I was wondering how the publication/source (from 2018) of costs of Li-Ion batteries holds up with the current costs? I currently hear and see fugures below 100 USD on the pack level (not cell level). It seems to me to be worthwile to have a new look at this as prices have fallen over 80% over the past 6 years since 2018.
It would be interesting to revisit this topic regularly in view of the fact that batteries, even though they have been around a long time, are still a rapidly developing technology in which the cost is consistently decreasing. Particularly since Ulike vehicular batteries, weight and volume aren’t as critical.
For Electric Thermal Energy Storage, the given efficiency is normally only for the electric energy. Those systems can also be part of a district heating system or used as input for industrial chemical processes. That can drive up the efficiency a lot, similar to what is seen with traditional power plants. It will be interested to see how the commercial scale system in Hamburg will work out.
Compressed air can also (to a small extent) double as a heat sink during power restitution, for air conditionning maybe ?
Naturally yes as the typical waste heat is actually something you wanted to extract from the storage anyways so only inefficiencies are when heat escapes somewhere besides the intended application. If the storage time is low, there is very little of that.
Excellent video that highlights some of the key energy storage problems in terms of overall capacity, cost and contribution to total carbon emissions. I'm sure there's huge scope for technological innovation over the next few decades to move all of those numbers in a direction that favours deployment at massive scale but I hope that policy makers will start to look at the nuclear option more seriously.
There are several developed countries that have already effectively decarbonised their electricity networks using nuclear (e.g. France) or a mix of nuclear and hydro (e.g. Sweden/Switzerland). These countries provide a template that other countries should be looking to follow while the key imperative is to reduce carbon emissions as fast as possible.
What do you think about the problems nuclear plants face during drought as currently examplified by France.
The template seems to be especially vulnerable to those droughts that are expected to become normal occurences in the future.
@@sualtam9509 the answer is to site nuclear power plants on the coast as much as possible. France's are mostly inland, which needlessly constrains their potential output, given France's Atlantic coastline. It might also be possible to gain the additional benefit of using the waste heat for desalination as a valuable drinking water supplement in times of drought. Of course such water would never enter the reactor and would simply carry away waste heat via a heat exchanger, with the reactor cooling loop being separate.
Yep that is the key to reduce carbon emissions as fast as possible. The only way to do that realistically ( without using perfect solution pipe dream thinking ) and try and get there anywhere near the time dead line, is to use NUCLEAR!! I just hope people start to realise this in time before it is to late!!
Because the nuclear option is not something you can just suddenly decide to support and get behind in the last few years before everything is dead! Just think about that!!
I hope people start to open their eyes at the enormity of the problem climate change poses, and that trying to use an elegant perfect solution to fix the problem is not the answer, when you have not time to waste!!
It is not only nuclear power plants that are constrained by low river levels in the summer, it is any thermal power plant, such a coal powered and gas powered electrical plants. They all need to cool down the steam they generate to power the turbines. Only the heat source varies: fission, gas, coal.
That being said, summer is not peak demand season for electricity in a country like France. So the constraint on production at least in a country like France is not a significant problem, at least for the moment.
We will need to deploy all sources of clean energy on a massive scale including nuclear as we not only need to replace coal and gas in electrical generation, but gas in heating applications which is a huge amount (probably equivalent to current total electrical generation), petroleum in land transportation, and coal and gas in industrial applications such as steel manufacturing, concrete production, etc...
The numbers exist somewhere, but the world will need to multiply current nuclear and renewable electrical power generation by a factor of 20 if we are to approach carbon neutrality. So electrical power storage will be key.
@@sualtam9509 build nuclear plants on the coast and dump waste heat into the sea. Cooling towers (evaporators) that use fresh water are not obligatory: they are just most convenient way to dump waste heat when you have large body of fresh water nearby, but you can make a heat exchanger that will transfer heat to sea water without any evaporation happening.
Not to mention that during winter nuclear plant can serve as a source of heat for a city and in that case "waste" heat will not be wasted at all.
look forward to your videos every day. Always and informative always clear always concise. You do sound a little under the weather today. Anyway, I hope you feel better if you are.
Such a fantastic video Sabine, thank you, I did enjoy your dry humour and clear facts! Very seldom do I see "cradle to grave" explanations anywhere on the internet presented so well. It is, however, a pity that this video will probably only be seen by people who are naturally interested in the real costs of energy (in terms of money, environment, and human well-being) and/or by the people who have enough interest in numbers to "get the picture". Not everyone grasps terms such as kWh, MWh, and many have no idea how much energy their fridge or toaster uses, so this video will likely not appeal to a portion of the general public.
But Sabine, I believe your video has a loud and clear message! In fact, I would advocate everybody seeing this video, especially young people - the men and women who drive our future - they could learn so much from this video. But the group that needs to set aside their ideology and make the best informed decisions, desperately need to wake up, and take the implications made in this video very seriously indeed! In this last group I would include (at least): Every single politician of every political colour, all die-hard green NGO's, the UN, financial institutions, think tanks etc etc, for they are the people that really MUST see this video, understand it, and... I might add: They need to stick to the facts, learn the lessons, and apply where necessary.
Indeed: preaching to the converted!
Doing the cycling leg of a Ironman triathlon, 180km, at 30km an hour, i.e. cycling for six hours straight at 30km/h amounts to about 1 kWh. That is something a lot of us, those who cycle, can relate to. That is an awful lot of pedaling for 1kWh, an amount of energy something that we perceive as little.
Every single politician of every political colour, all die-hard green NGO's, the UN, financial institutions, think tanks etc etc....should sit through one semester of thermodynamics for engineers 101A to acquire a basic competence for the discussions that we should have and the decisions that need to be made
@@PhatPeatTube very helpful - thx
Once we get V2G sorted out, which is little more than a standardization issue, we'll get a large amount of lithium battery storage without having to buy or house any batteries at-all.
Nice breakdown, thank you. It makes me wonder if anybody has tried to install gravitational batteries into windmill towers.
that's a good point actually, there is big height, empty tube and direct connection to power grid
I’m curious. This physicist spent 20 mins explaining in this video, no doubt with hours or prep, why storage has fundamental limits. Then you think somehow she missed gravity?
Why not do the math yourself. One 2MW turbine, runs for a day, then wind is down for two days. How much storage is needed, how many gravity towers needed just for this one turbine to have backup? What’s the cost? How much additional steel, concrete and other material, and additional maintenance, needs to be produced and installed on the back of the one turbine’s revenue?
Or skip all that, and imagine why there are no production gravity storage towers paired w a commercial wind farm anywhere in the world.
@@Nill757 No, hydro-electric is the default gravity storage. It's the ability to combine it as a battery backup when the wind is low that fascinates me.
@@Nill757 or, simply, why try anything other than what is already existing. Voice of innovation right there. Or nuclear lobby.
@@koborkutya7338 you think gravity storage hasn’t been tried? WTH? There is no significant nuclear power lobby. There is a large anti nuclear power lobby funded w millions$. There is a wind and solar lobby, driven a 100 B global wind and solar buis.
A point to remember about batteries is that their carbon intensity arises from the energy that is used to make them, including upstream emissions from raw materials extraction etc. These emissions, in theory, can be reduced significantly by using clean energy to make the batteries as well as extending their lifetime. However you can't make fossil fuels from renewable energy, they're fossil by definition.
Furthermore, the carbon intensity for wind and solar can be reduced too by using renewable energy for their manufacture.
However, the real killer for storage used for mitigating dunkelflaute periods is that, due to the long cycle times and low load factors, system capital costs become very significant. For this type of storage most technologies, especially batteries, fail on economic grounds. Hydrogen in this instance has the advantage that, assuming you're using large scale geological storage, it has a very low marginal cost of storage, i.e. the cost of each additional MWh of storage is small compared to the cost of the fuel production and power generation parts of the system. Having said that, there are alternative, although similar, technologies that should perform at least twice as well and provide more flexibility.
Thank you for this wonderfully informative video.
We in the USA use a technology for our nuclear reactors that was originally developed to enable the reactors' use in naval vessels. (E.g., aircraft carriers, submarines) I believe there are other reactor technologies that, because they need not be light, could produce nuclear power much more safely and/or efficiently from land-based installations.
The phrase, "molten salt" comes to mind.
Perhaps you could address some of the types of reactor technologies available today and identify one or a few that might make safer, and/or more efficient, land-based reactors.
Again, thank you for this excellent video.
Ooo, this sounds interesting.
I made a similar reply. The ship based reactors have not prevented these Naval ships from visiting the world, people take tours on them, and men and women serve on them with safety. While typically less than 500mwh, they could be quickly deployed wherever there is a cooling water source. Ocean, lakes, rivers and be quickly deployed. How long are we going to wait for a breakthrough solution when this one has existed for almost 65 years? If you believe that CO2 (open discussion) is the root cause of ending mankind’s existence I think you would make and risk analysis of this solution and start deploying. Almost a rant, sorry.
Russia use REMIX technology that allows a large percentage of the spent nuclear fuel waste to be reused with only a very small amount of new fuel to be added to recycle the already used waste. This tech virtually eliminates the need for used radioactive waste disposal, as it is recycled back into the reactor. I believe the EU use MOX technology in their reactors which is virtually an earlier version of REMIX but not as efficient in recycling and dealing with the radioactive waste.
Cheers and Beers!
9:50 when talking about thermal energy storage, are you referring to storage using resistive heating only? I remember reading up on a pumped heat storage concept a few months ago with an expected round trip efficiency of 75 to 80 %, which would put it on par with pumped hydro. I'm not an engineer, but it seems pretty neat, and I was wondering if you had come across any projects of that sort in your research for this video, and what you thought of them.
The concept I saw being proposed used two insulated tanks filled with gravel, connected by a heat pump, that would circulate argon from one tank to the other to create a temperature differential between the two, -160°C on the cold side and 500°C on the hot side. Then to discharge the battery they'd just run the heat pump in reverse as a heat engine to produce electricity. They also proposed using either the heat or the cold directly for industrial purposes if need be.
She had to mention it for completeness.
Thermal only makes sense if you can use the stored heat to heat.
Pumped heat storage at very high temperatures is very hard on the pumping and turbine equipment. Turbines run at high RPMs and high temperatures but they must be reduced in speed to accommodate the generator or motor. This means very large and very expensive turbines like those used for thermal power plants in the several hundreds of megawatts range. Suddenly it costs as much as a full-size thermal power plant.
That definitly doesent work.
First, heatpumps are only efficient at relatively low temperature deltas. In this example, theres no benefit using a heatpump over resistive heating.
Second, a heat pump simply cant produce energy out of heat. The only viable option here is a steam turbine to transform the heat back to energy.
Round trip efficiency would be approx. 25 to 40% for this tech.
At least its cheap to build and maintain at large scale.
Hydrogen is extremely important because, even though it's not as efficient, it costs so much less and can be stored in salt caverns for winter to get through the cold dunkelflaute.
When the total renewables capacity is 3 or more times the peak load and the excess electricity is used to make hydrogen for storage, the system can be self-sufficient and any excess green hydrogen can be used in industry to replace gray hydrogen from fossil fuels.
@@acmefixer1 H has terrible properties: It gets hot when it is decompressed, it diffuses into everything, it needs to be very cold or compressed to have density, ...
Thank you very much for this overview. There are so many opinions, especially from politicians but those are biased and not useful when it comes to comparing the options. Personally I don't think hydrogen is currently an option as long as over 99% is produced using natural gas as it currently is, it's even worse than just using natural gas in power stations and there is no sign that this is going to change drastically. At least not in the timeframe we need to lower our carbondioxide footprint. I have read about another interesting project in Finland that uses hot air created with the excess energy of wind and solar power to heat a bulk of sand to 500-600°C and use it as a source for Fernwärme (district heating?). It can maintain the temperature at the required level for months. Also ETH Zürich is working on projects that convert solar power directly to combustible materials. Still I'm convinced there is one aspect we need to consider as fast as possible, that is use less and conserve as much as possible. We can't deny that we cannot afford to continue to use as much energy as we do now. I know it is unpopular but I don't see that other solutions will be ready in time.
I too am not a hydrogen fan. You are correct that hydrogen is made from methane but I think it is a byproduct of ammonia production. I could be wrong about that and I am too lazy to look it up! Electrolysis would be a more direct route if it were to be implemented. You could co-produce liquid oxygen for rocket fuel also. Perhaps that's how it's done. Still too lazy to look it up!
I thin that, when concerning storage, H2 would have to be produced with electricity(otherwise methane is storage fuel by itself). Bulk of H2 for industrial use is made with methane (cheap comparing with electrolysis).
@@msxcytb
trouble with using methane to produce hydrogen or as direct fuel is that it also produces carbon monoxide and carbon dioxide. electrolysis of water on the other hand produces hydrogen and oxygen.
So it rather depends where the methane comes from, is it a byproduct of food production or are we drilling into the earth to pump it up as a fossile fuel.
The main problem is that the world is rather complex and we will need guidelines as in laws that are formulated well so we actually achieve the goal we intend with it rather than what happens now with carbon offsets laws which effectively cause more carbon to be emitted while they were formally intended to reduce the total emission of carbon.
How about an energy storage that also is the motor the energy stored runs? A wind up (like a toy but with way much more winds of many interconnected spiral springs of high torque) motor stores the energy in the springs and when released turns the motor directly from the same mechanical entity as that which stores the energy. No need for heavy noxious chemical battery or weighty separate electric motor. No long charge times either. A high torque high rpm winding station could wind up such a motor in a minute.
Hello Sabine, I live in the Netherlands so pretty much same climate as Germany.
If you truly want to study Dunkelflaute, you should estimate the required energy generating capacity with it.
Tony Seba did this for Germany and you need to store about 4,5 days of energy to work through Dunkelflaute.
In our climate we have to build more wind power then solar to overcome winters (which both Germany and the Netherlands are doing).
As for battery technologies costs in order to estimate them you will need to use cost curves. Prices are coming down in a rapid pace and wind, solar & battery cost per kWh is already cheaper then any other form of energy. I am sure you know the LCOE report of Lazard, where Nuclear is about 3x as expensive and annually growing in cost ($180 vs $60/MWh)
Nuclear is providing energy all the time which is a benefit during dunkelflaute and a tremendous pain in the rest of the year. This is why I believe that Nuclear requires battery storage too or else we throw away a lot of energy. We have negative energy prices every weekend in summer period (EPEX spot market), as Nuclear cannot switch of.
So Nuclear is way too expensive and with solar wind, batteries there is an alternative that does not create waste for a period in time similar to the existance of humanity.
This video is yet another Nuclear commercial. A petty that you did not really investigate the alternatives.
The video didn't mention sodium-ion batteries, which could become very important in the future as the supply of lithium eventually dwindles and lithium-ion batteries become significantly more expensive. Sodium-ion batteries weigh about twice as much as lithium-ion batteries for the same amount of energy capacity, which makes them undesirable for cars, but the extra weight is not such a big problem for energy storage at homes and factories and power plants. Most importantly, sodium is much cheaper than lithium and the supply of sodium is practically endless.
Sodium batteries aren't really out yet. But a company is claiming they should be in production next year. And they plan on making an electric scooter with it.
But lithium isn't the biggest problem. Nickel, cobalt, and even copper are running into supply issues right now.
Not sure why, but almost everyone seems to think that whenever we switch from one thing to another, everything is either supposed to magically already be in production, or getting it into production shouldn't take more than a few weeks. If not, it's some horrible thing that's going to make it outright fail.
Fact is, people can want things faster than plants can be built to supply them.
It's natural. And people will have to wait.
We aren't going to switch in a year. We're not even going to switch in a decade. There's 330 million people in this country. That equals a LOT of stuff to build, and there's still a LOT of stuff to invent.
Modern cars didn't start off remotely like they are now. It took over a hundred years to get them to where they are. And people expect us to undo all that in nothing flat?
Same with our electricity production.
Can't bulldoze a coal plant today, and open a solar farm tomorrow morning.
Also, chemical batteries, of any kind, might be great for some things, but not for everything.
Wind farms are a good use f
Chemical batteries. Wind turbines make electricity directly, so storing it isn't expensive.
But thermal solar makes heat that it uses to heat water to make electricity.
It's better to store the heat as heat, and then convert it to electricity as needed. Or you can use the heat for something else, which is more efficient.
Lithium is extremely abundant, we will never run out of it.
@@jaredgarbo3679
Abundance of quantity, doesn't mean you're not going to have serious issues with getting enough.
Earth's crust is .002-.006 percent lithium.
We're not ever going to get that out. Ever.
Once we run out of decent sized deposits of much higher concentrations, it will effectively be gone as a resource.
@@jaredgarbo3679 add to which it is recyclable nowadays, at about an 85-90% recovery rate, if the people in the business are to be believed. And due to the value of the materials, I’d expect nearly 100% recycling rate of batteries, when feasible (ie not damaged in a fire etc.).