@dheya alwatban Do you somehow have the menu options for the sealing bag machine? It is usually used with this machine but sealing the bag. It has the menu something wiw 101 , 202 , 303 404 etc. Thanks!
Hello, thank you very much for your explanation. Is there any way to get the complete manual? Even if it had to be purchased. I bought a machine but they don't give me support and I have it stopped.
Controlador de temperatura para mandar la señal de llenado? Si fuera así, solo tendrías que conectar los pines del pedal hacia un contactor y este último al PLC
buenas tardes, tengo un problema con mi máquina, la compré y hace el trabajo de llenado pero no marca el peso, cuando la destapó y aplastó la báscula si lo marca, que podrá ser? podrías ayudarme?
Your video was very helpful!! Thank you so much. However, now I have a challenge with the bagger. I believe there was a jam and it displays an error code E03. How can I clear the error code and get it working again. Many thanks in advance
This advice in under your own risk! To clear E03 error just power off then power on packing machine, if persist...disconnect power from outlet, open right chassis, there are two small magnetic sensors one for sealing cycle, another for film forward. Sometimes the magnets just drops... glue it.
hi, I have a problem with the dosing machine, it continues to automatically unload at the end of the cycle. I removed the photocell and pedal, but it continues to unload from dola. I ask for help
I have this same machine with this same control panel. How do I get the machine to automatically dispense and weigh multiple doses in a row? Mine will only weigh the first dose of grains, and then dispense them, and then it does nothing.. i have to reset the machine to get it to dispense another dose 😫
Hello! Mr. Jason Fei I'm Felipe Su from Fega Packing ., one of your client in Mexico, I have a trip scheduled for China and I d like to schedule a date with you, you'll have some contact mail?
Hola Sr Felipe, yo compré una máquina no con ustedes pero no sé si me podrían dar soporte, es una fz5000, he buscado manuales por todos lados sin éxito alguno para poderla dejar a punto.
My son messed up the whole programming of my dispenser machine. I kept going through the final . Can you please tell me the defaults? Just write them I know how to get there. I will really appreciate it
Your English is excellent for imparting knowledge. I learned....
This is indeed awesome information. Would it be possible to have a manual to the programming of this system? The other 14 functions?
Thank you very much for your useful information .
Thank you very much. This video was really helpful.
Is there a manual that is available? By the way. Your instructions worked great. Thank you.
Can you show me how to set the weight and how to dispense the product out?
Awesome instructions, do you have a pdf manual or could you cover tje other functions ? Any chance to see that?
Sorry, do you find the manual?
@@jossybelnunez3488 Unfortunately No. Can you help with that ?
@@feedsapi I have the same problem 😔
@dheya alwatban Do you somehow have the menu options for the sealing bag machine? It is usually used with this machine but sealing the bag. It has the menu something wiw 101 , 202 , 303 404 etc. Thanks!
@dheyaalwatban5361how to reset to recovery bro?
Hello Sir .. could you please provide default values for all three preset speeds also what s1 to s13 means individually
Yes.. you understand the challenges am facing now..
Hello, thank you very much for your explanation. Is there any way to get the complete manual? Even if it had to be purchased. I bought a machine but they don't give me support and I have it stopped.
Hi sir, thank you for the info.
I have question if I finished 1 batch like 250 grams it's showing always discharge in indicator light
Hello, can it adjust opening of door?
How that dc motor work with arm? How to know position of gate weighter?
Hey can you please tell me why you use P660 in function area please reply?
Hello, you help?
Buen dia desde peru quisiera saber que parametro debo cambiar para trabajar con controlador de temperatura externo , gracias
Controlador de temperatura para mandar la señal de llenado?
Si fuera así, solo tendrías que conectar los pines del pedal hacia un contactor y este último al PLC
buenas tardes, tengo un problema con mi máquina, la compré y hace el trabajo de llenado pero no marca el peso, cuando la destapó y aplastó la báscula si lo marca, que podrá ser? podrías ayudarme?
Im thinking of purchasing for filling glitter bags. What type of film do you buy for the packaging? It would be a clear bag?
Great video. Is there a way to turn off the sound?
Good morning. Can you explain how to connect the electrical connection diagram? Many thanks
Your video was very helpful!! Thank you so much. However, now I have a challenge with the bagger. I believe there was a jam and it displays an error code E03. How can I clear the error code and get it working again. Many thanks in advance
This advice in under your own risk! To clear E03 error just power off then power on packing machine, if persist...disconnect power from outlet, open right chassis, there are two small magnetic sensors one for sealing cycle, another for film forward. Sometimes the magnets just drops... glue it.
@@nelsoncastro69 can u please advice about the error E02, How to rectify it.
@@mdalimuddin03same problem hear
I have also e2 erro
Please can you demonstrate weight calibration too.
The weight scale is not accurate
Mine also weigh 2% to much.
Hoe can I calibrate this?
It is impossible to make contact with this company, I wonder if they are still in business any longer?
How to set weight
How to get a detailed guide to all the settings?
Нашли?
I need
@dheya alwatban for P808, P550, do you know all the setting is for?
I'm just planning to turn off the light sensor (just want to use the pedal)
@@adminmomotofood9341 disconnect the light sensor from panel =p
how can I turn off the sound of the machine or make it quieter?
I really need help.My machine has stopped vibrating and so does not fill the plastic film with powder anymore. The speed is quite ok though.
hi, I have a problem with the dosing machine, it continues to automatically unload at the end of the cycle. I removed the photocell and pedal, but it continues to unload from dola. I ask for help
I would also like to request a full manual please!
How I can calibration for this machine?
Please tell us how can we calibration of machine
@@srantechnologies1265 Remarks: Calibration sensor zero point mode:
1: 100.0 g-500.0 g Correction mode: long press the function for 3 seconds, ↓2 times, ←1 click, ↓2 times, confirm, ↓5 times, →1 times, ↓5 times, confirm, display F00, ↓2, display F12, confirm it, display 000.0, put 50g from the inspection port, →1 click, ↑5 click, display 050.0, confirm it, display F13, quickly 1 click, display 50.0, calibration is complete .
2: 1200-5000g calibration mode: long press the function for 3 seconds, ↓2 times, ←1 times, ↓2 times, confirm, ↓5 times, →1 times, ↓5 times, confirm, display F00, ↓2 Next, display F12, confirm it, display 0000, put 200 grams from the inspection port, → 1 click, ↑ 2 times, display 0200, confirm it, display F13, quickly 1 click, display 200, calibration is complete.
How we calibrate if we need weight of 16gram -25gram ??
Hello I recently purchase this machine. upon entering P808 and P660 and confirm, nothing happened. How to fix this problem
I have the same problem
are you sure the the machine you bought is from yason?
i'm just affraid that you bought from different manufacture and the code is different..
same issue, i already replaced the board and nothing happenned. Did you get a solution?
Please, can you suggest me the 13 configuration documentation, what does what? 🙏
I need to fill 2g weight for tea bag. can some one help to set. I have tea pack machine at bottom.
Hi. How if this machine sign E-07
Thank you. How do i reset my machine to factory default setting ?
Hi. Did you find out how to factory reset ? Please if you do help me out. Thanks.
Hi, I emailed you with a big question, can you help me?
How we can callibrate the weight ?
I have this same machine with this same control panel. How do I get the machine to automatically dispense and weigh multiple doses in a row? Mine will only weigh the first dose of grains, and then dispense them, and then it does nothing.. i have to reset the machine to get it to dispense another dose 😫
possibly malfunctioned control board, suggest to get a replacement.
@@NathanLTPK thank you
Same problem
@@NathanLTPK Hello, where could I find or buy the electrical components for the machine.
@@NathanLTPKi have the same machine but up to 500g and I want to reset it can you tell me how to reset it please thank you
99.9 gram display is different sir , please explain for that too , how to set speed
I'm interested in that too! Did you find a solution for the 99.9gr setting?
@@Silanus1 yes got it
@@arjunpackagingmachinery9330 Can you share with me how it went?
How can i buy this panel
Please upload video for weight setting
Good day. What does error 02 mean when I perform a calibration?
Same here did you find any solution
Can someone tell me how to reset this panel? I just imported this and not working
HI THERE. IS IT POSSIBLE TO SEND ME A OPERATING MANUAL FOR TRAINIG THE EMPLYEES.
What are other settings? Please!
Hi,
is there possible to connect RS 485 bus line? if no, can you provide firmware source code to upgrade machine for our needs?
Regards,
Hello can you please give the setting of the weight of 30grams
Please Share the Manual for all the settings
my machine cant start? How to fix this
How to reset to recovery?
I have 200g filling machine now fast button is very slow Please give us fast setting
Hello, how are you?
Who can give me info on MENU 200, what do the various F1 -F2-F3-F4-F5-F6-F7 -F8-f9-F10-F11-F12-F13 set?
En español opr favor . Tengo una maquina y no la entiendo porque no tengo el manual
How to install 5 kg on 9999 machine
how to solve ERROR -07 in this machine.???
Can you explain how to calibrate the scale
You can go into calibration mode by P808, P550, F12.
@@김응주-r5s Hi!! Do you have any information in PDF file?
@@김응주-r5s Hello! Help please with the manual. Can't get it anywhere. novissapphoto@gmail.com
@@김응주-r5s Thanks for the advise, can you please help with the manual ? --> ny.ango.belle@gmail.com
Indian Price?
Я написал вам на почту письмо вы получили моё письмо или нет ?
Hello! Mr. Jason Fei I'm Felipe Su from Fega Packing ., one of your client in Mexico, I have a trip scheduled for China and I d like to schedule a date with you, you'll have some contact mail?
Hola Sr Felipe, yo compré una máquina no con ustedes pero no sé si me podrían dar soporte, es una fz5000, he buscado manuales por todos lados sin éxito alguno para poderla dejar a punto.
Buen día. Lograste conseguir algún manual completo de todas las funciones de la máquina. ?
@@cmbozic yo lo tengo
Como haría para obtenerlo. ?
@@cmbozic pues intente pegar el link pero no me dejó RUclips
Sir may i know your wechat..plss...
Tarjeta no prende porque
Remove code E03 penal plz reply me
My son messed up the whole programming of my dispenser machine. I kept going through the final . Can you please tell me the defaults? Just write them I know how to get there. I will really appreciate it
hello ... did you find the default parameters ? I also need it
@@ourserenehome hi, nop. I had to buy a new module machine on eBay