JTEC TUNING FOR 5.2 MAGNUM ENGINES ON HP TUNERS
HTML-код
- Опубликовано: 26 сен 2024
- WE TAKE A VIEWERS ECU TO THE NEXT LEVEL FOR THIER 5.2 V-8 MAGNUM 1998 DODGE DURANGO
WE MAKE TIMING AND HIGH LOAD FUELING IMPROVEMENT FOR MILEAGE AND PERFORMANCE TO GET THE MOST OUT OF THE FAMUS 5.2 MAGNUM ENGINE , COME ON IN AND WE WILL SHOW YOU SOME OF THE BASICS OF TUNING A JTEC ECU ON HP TUNERS
HP Tuners get the discount here ---- amzn.to/3VMDs9n
Paid discount amazon links below
AUTOMETER LS TACOMETER HARNESS
amzn.to/3cQcBW6
AUTOMETER BOOST GAUGE
amzn.to/3L3SfW9
alternator
amzn.to/3zujceX
Michigan Motorsports harness for LS swap
amzn.to/3fyDxHF
EVIL ENERGY 8AN PTFE Fuel Line Fitting Kit,E85 Nylon Braided Fuel Hose 10FT(0.394Inch ID)
amzn.to/359VR7U
90W GEAR OIL
amzn.to/3DizXee
Valvoline Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid 1 GAamzn.to/3GdyOGH
Get motor oil here amzn.to/38r7uWx
gt-45 turbo here amzn.to/3zo7RwO
Thanks for watching
Be Happy
Art
Dr. Art . During you recent foray into the mystical world of ecu's , have you explored the possibility of rebuilding Chips ? Specifically , I have a 1997 Ford F-250 with the 7.3 liter Diesel engine . I have the Banks intercooler , Banks turbo mod , 3 inch exhaust all the way from stem to stern ....and the Banks chip . I was unaware that the chips have a limited lifespan . Generally , that span is around 10 years . Mine went south near that period . Since I have to chip and the the chip has it's number printed on it b, I called Banks . Banks said " Of course we can send you a replacement chip , if you'll send us your chip and 600 bucks . I think 600 bucks is a touch high , considering that I already spent 7K with them on the system . So , do you do chips yet ? or is that something you're not interested in ? Thanks
Never did any of the chip burning
But let me look at what that would take
Maybe someone is selling the old school chip burner on eBay
So I have a 96 5.2 5 speed Dakota, with the odb2 JTEC, I added a slightly bigger cam, I'm assuming its possible to have the motor work better with the cam?
Yes 100%
So im out of luck on my 95 ram, its obd1.
Can you do a tune on a 04 Jeep Grand Cherokee 4.7?
yes
@@DrArtshotrodrehab 4.7 tune … that would be cool :)
@@makdaiss if I had the vehicle
The ECM is a ng 3 and I do not have a bench harness for that one
@@DrArtshotrodrehab I understand. jtec+ was in Jeep WJ.
👍💪
Hi Dr Art. Really enjoying your videos on HP Tuners. I have an off-road only TJ Wrangler that I have upgraded with a GT35 Turbo (10 lb boost) and 30 lb injectors, stock engine. I have used HP Tuners to dial in the injectors and it goes pretty well. I haven't done much with the timing so far. The question I have is whether I can copy your timing mods with the turbo or should I not take it that far under boost. I don't want to have excessive knock or pre-ignition. I heard somewhere that you should retard ignition in the high boost area by 1 degree per pound of boost. At 92 and 105 MAP should I hold it back to say 24 or 26 degrees and smooth the curve from there?
Sounds like a fun ride, but no, you should not copy my timing buds when you’re boosted you will blow the head right off the thing you’re right for one to 2° retardation for each pound of boost and you’re correct with that type of computer. That’s a bar map sensor that the last two segments are where you’re going to see boost with that sensor and that I would probably limit your boost to about 10 pounds of boost and total of 20° of timing
some safety zone. It’s always better to be a little safe. Sounds like you’re on the right path, but yeah, definitely do not copy my timing curves under boost.
@@DrArtshotrodrehab Thanks for the reply. I'm in New Zealand and am using a Honda 1.7 bar MAP sensor to maximise the very small MAP table and have modified the MAP multiplier accordingly. I'll stick to a max of 20 deg as suggested. Cool to have someone talking about JTEC. I also have a standard road going TJ and will try the advanced timing tune on that one!
I have the same vehicle but 1999 Durango 5.2 with Hughes intake manifold, big gulp tb,headers, 3” y pipe and exhaust k&n coi 4.56 gears, could use some timing advance had the death flash done. what do I need to do as far as what 2 buy for a tuner and custom tuning. Tia
I use HP Tuners
Their interface dongle is @399.00
The link in in the video description
Then I can send you a tune once you download the base tune from your ECM for 100.00
Or you can send me the ecu and I can program for 250.00 including return postage
You can e mail me directly. dr.artsstuff@gmail.com
Someone beat me to it.
Dr Art what is going on with the 318 .
What would you charge to make sort of the same style tune as utg jeep on a 97 buick century
It would be 225
That’s total to unlock the computer in HP tuners the labor, and the programming and the return shipping
I have the mpvi3 and tried to do a read on my 98 5.2 Ram, when I try to read the file it says interface not supported. I have no problems tuning on my ls swapped drift car but for some reason I am unable to crack the dodge. Any ideas?
Yes happens a lot actually
Resync your dongle while hooked up to your laptop in HP
THEN restart your lap top
Most of the time this helps. If not your ECM is getting ready to leave the party
How do I buy the tune you put in Tony’s 4.0?
One of two ways if you have access to HP tuners I can send you the file on a thumb drive. It’s 10 bucks when you send me a self address stamped envelope or you can send me your computer and the prices $225 and that gets it unlocked in HP
Programming and labor
and return postage
What's the red car in photo above your left sholder?
68 cougar
Can this be done on a 2000 4x4 quadcab Dakota sport 5.9
yes
What improvement can I expect and what is the cost to have it done
@@randallalley6925 if you have no other mods to the truck, you can expect a great increase in full throttle acceleration, full load, like towing ability and increased throttle response
The cost is 225 shipping the Ecm to me that includes unlocking the ECM and HP tuners the programming and the return shipping
What horsepower gain can be expected
1:23 What do the other lines above the red line represent?
Different levels of manifold vacuum
Cruise
Decell etc……
@@DrArtshotrodrehab Should explain that more.
So did they just send you the ECU? I have a 2003 5.9 4x2 Durango, with the 4 plug ECU
That requires a different bench harness that I do not have
But yes it is possible
How hard would it be to reprogram an automatic computer to a manual transmission computer ?
Not hard at all
Hi Dr Art, is it possible to tune a 1995 Dodge V10 with HP Tuner? It's not an OBII
No
@@DrArtshotrodrehab that's what I thought, thanks 👍
Dr. Art, when installing even (what seems like) a mild tune like this, does the customer need to run performance plugs, coils etc? Just curious thank you.
No
Can this be done on a 2000 Dakota quadcab sport 5.9
@@randallalley6925 yes
💻¥⛽️
I wish something like this was available for the 2007 Kia Grand Carnival / Sedona 3.8 V6, the fuel consumption on them is disgusting.
Dr Art, Ben from Australia here and I have been Enjoying the videos mate.
Well done
With Tony’s Jeep XJ 2wd Cherokee ask him if he would do an economy tune for it.
A tune for money back into our pocket without spending money on throttle body spacers and later model components.
The XJ did not come to Australia as a two wheel drive but I’m wanting to build one for a daily driver and no off-road work at all.
Please try and help out with economy 😁