New Parts In The MP7... Is It Fixed???
HTML-код
- Опубликовано: 24 окт 2023
- Save 40% on your system and your first month is free when you sign up for Fast Protect Monitoring. Visit simplisafe.com/demoranch to customize yours! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.
Get your HEAT WAVE Eye Protection or Sunglasses TODAY! Visit glnk.io/n8x0/5 and use code: DEMOMATT10 for 10% off your order!
Demo Ranch First Aid Kits available!!! Stay Safe at the Range!!! www.bunkerbranding.com/collec...
Demolition Ranch Tees here! Comes with a free hug if I catch you wearing it. www.bunkerbranding.com/pages/...
Watch me vlog. / offtheranch
/ demolitionranch
/ drdemolitionmatt 
Спорт
Thoughts and prayers to Donut Operator in these difficult times. It gets better. Stay strong.
@@brianschenk7156 He doesnt have a full auto MP7
I too will pray for Mr. Donut and his life long dream of the MP-7. We got your back Donut!
no it doesn't not until i get me a mp7
Somewhere, DO is crying his eyes out.
At least Donut won’t end up like Larry Vickers. Wonder which PD wanted a demo of the MP7 Matt has……….
This thing sounds amazing 🔥
My life is complete, my two favorite RUclipsrs have finally done not one but two vids together! @vicegripgarage sweet engine swap and paint job!
Jesus you controlled that mp7 like you have done that before 🤔
VGG, nice to see you here.
It runs
You should call it a "Freedom make it happener"
Small Correction: Afaik the tugsten powder is not in that carrier "to dampen the impact of the gas piston", but rather to insure that the bolt is nicely closing after a new cartridge is fed into the chamber. Your example with the hammers showed it actually quite good. Sometime it happens with bolts, that they want to "bounce" open again when closing because of the involved stiffness of the surrounding material. The tungsten powder that (because of its inertia) "slams" internally forward at the exact right moment, avoids this movment.
Fun Fact: G36 bolts also have an internal cavity that is filled with a metal powder, to do exactly the same thing.
I believe it also slightly reduces the cyclic rate with the added inertia, it does also help to dampen the piston striking the heel of the carriage and your example is correct and probably the biggest reason why it’s there. Some combos of barrel length, reciprocating mass, cartridge, load, etc. just don’t seem to physics as well as others and need a little tuning lol.
🤓
Geek
@masnospmoht6905 says the guy using emojis...
Yo props to Derek for holding the MP7 like a rock! I bet if you had a target he would not have missed a single round!
Holy heck, no kidding. Thing barely moved. 😮
@@green7449@17:29
Props to the guys that fixed that. They definitely deserve a few nights at desperado and some range time with you
@@KINGHZEYAll the tacos!
@@KINGHZEY Fish tacos
@@KINGHZEY taco tacos!
You should make a shirt that says I got an MP7 and donut doesn't
That’s just evil!
And the swine doesn't 🐖 😅
It should say Demo - 1 Donut - 0
@@yeeyeebrudderz8629with a pic of an MP7
He doesn't need a shirt, he has an MP7.
4:39 Matt: “can we kill the fan”
Someone in background literally kills the fan
It's amazing how many of those rounds stayed on a target that size.
Derek saying "it runs" was the best part of the whole video
Now _thats_ bringing the thunder! lol
Ya cool to see him shoot a "pew pewlator"
Derek is my spirit animal
Strongly agree
@DontReadMyProfilePicture.57 K
Nothing is more glorious then Matt having a FULL AUTO MP7
Yeah there is, having one yourself
Well thanks for the spoiler I guess 😂
@@youcandoit7494you beat me to it!!
It'd be more glorious if I had one.
Golden medal reward for the most plain comment in this comment section
This "refurbishing" content is awesome. It's interesting to see some repair processes in Matt's manner.
12:12 Matt’s about to unlock his Offenders superpower
You're gonna need all that simply safe stuff to keep Donut from liberating your mp7.
Well, he wasn't the first person Matt took a BL item from, I think we can all say he's done that to us.
Tactically aquire
This is actually a really great idea for an intro skit… you’re welcome Matt
Somebody's about to get decentralized😂
Donut is gonna need to be watched at all times at the ranch now 😂
note the sponsor being Simply Safe as they added more cameras just for this reason
Way to go man. Such a dream gun for so many people. It’s cool to see how you’ve grown in the industry to be able to accomplish this. Gives hope where there was previously none! Haha
I very much enjoy how much fun and respect you're giving Your MP7 since it's one of my favorite guns of all time.
Thank you MP7 man. Your service is unmatched.
Vice grip garage must of heard about mp7 man need his help
Damn. Beat me to the punch. Not mad though.
Seeing Derek with an MP7 was like a weird fever dream 😂
Strangely, I completely agree.
Totally made my evening...he seemed quite comfortable with it too!
the video production just keeps getting better and im enjoying it. long way from flipping tables on the old ranch
Went by your store today really like it and the lady that works at the store super nice makes you feel really welcome and comfortable when you come in she was so nice we spent more money than we planned on
I'd be willing to bet that the carrier cracked and lost the tungsten powder, then the carrier began bouncing on impact which broke the piston.
That's what I assumed.
+1 on this, same hypothesis.
Also recall some gun snobs and gun redditors trashing demo for putting an o-light on the mp7, as if it wasn't clear its just for the sponsored video. As soon as that video is done, look at it now with a proper surefire. Many of those dudes just wanna put someone down when others have what they can't have- a full auto mp7.
Gun snobs would know that while posties aren't allowed in gun flexes unless its 2 FFL/SOTs, there's likely not much big shark SOTs out there that can beat a full auto mp7, even if its a posty especially since demo got that youtube money in other guns like tranny MGs etc.
I was thinking something similar. I don't think the powder would do anything to dampen the impact of the piston on the carrier, but it would work to reduce bolt-bounce.
There's tungsten powder inside the bolt?
@@theschmedaparadox1018 did you even watch the video?
Congratulations on the full functioning MP7 my dude!
SPOILERS
@@diabeticjimmy9032READING COMMENTS BEFORE VIDEO
Why you spoiler it😂
Couldn't be more happy for you. Congrats on your boss level MP7
Really like the restoration type videos, would be cool to see more guns get fixed up.
That Sunday Conversation bit was spot on. 😂
I thought that looked familiar but couldn’t figure out what it was
They even had there own Glenny Balls
12:09 Schrödinger's box.
The intro was so amazing love sunday conversations with Caleb and Glenny
Thank you. Such an excellent, excellent video .Great entertainment ,pretty good schooling. Keep on doing what you bunch of great people do ,
Derick is a former tier 1 operator, isn't he? Recoil control was on point.👌
@@dagameface8181 you mean Matt? I was talking about Derrick. Watch the video till the end.
I thought he would have said "bring the thunder "
MP7's are not hard to control at all, its really flat shooting.
Happy we got to see him do a cameo on demo ranch.
Derek is a Sasquatch.
The guys who sold it to you aren’t going to be happy it was that easy for you to get it fixed so quickly
LOL! That cross-over at the end was EPIC! Two of my favorite channels!
I was greatly looking forward to the video of it getting fixed, but I accepted I'd have to wait ages for it. I'm so happy
You got Derek! Go VGG!
Not only does it run it didn't even need a new carburetor! He didn't have to get out the clampilator 5000's either!
I def think Matt played a part in the ammo shortage 😂
I mean, is 4.6 even used by anything else?
@@ablationerI mean, is that the only gun\caliber he has or uses?
@@ablationerI think you can get a CMMG banshee in 4.6 but I might be wrong
Yeah he's for sure not panicking trying to find some 556 for under 70cpr 😂
@@notaredspyhe has one.
This has been the funniest episode you’ve guys have come up with!🤣🤣🤣
Thanks MP7❤
I really appreciate the style of this short series. I too thought it would be a longer quest to get the parts. But as we could tell from the first video, you quickly identified the issues and I dont know that there is anything there isn't a guy in Texas that can fix.
Sorry about the grammer in the last sentence.
12:18 good thing you know how to fix up animals😂
MP7 man is in our hearts forever now. Also Mere trying hard not to die laughing is wholesome AF.
*correction not Mere but Jenna
I saw clint's wife Jenna the unofficial "demo range safety manager," but I indefinitely didn't see mere...
Yeah that's not mere...
@@PaulGSXR Yeah y'all are right. Still wholesome to see her have to resist dying of laughter though.
@SamMurphyHSV to be fair normally you see Jenna's tattoo sleeve and it's always been a long running joke that they pretty much wear the same outfit when they're together... easy mistake
@@DS-182 affair
Awesome combo MP7 and an AB 5.56 A-10 suppressor! Sweet setup
Heck ya, dude!! The smile on your face says... everything!
Having Derek from VGG dump a clip and say "it runs" is frigging awesome.
You know what else would be frigging awesome? If you called it a magazine and not a clip.
I'm usually not "that guy", usually.
@@Jeff.78 🤓
@@Jeff.78it's fine to be pedantic in this case because both clips and magazines are used in the loading of firearms and it helps for people to become educated on the difference.
For the uninitiated watch a video of an m1 garand and how it operates and you will learn what a clip truly is. It's just a piece of metal that holds the rounds together while you insert them into the rifles built in magazine or in the case of revolvers your cylinder.
A magazine is what completely holds the rounds, typically your rounds are completely encased within it and a spring is underneath the bullets to help load the rounds within it into the chamber. Think ar15 and ak47 or Glock handgun and you have a magazine.
A clip is usually a thin piece of bent metal that holds a few rounds together and is jammed with the rounds straight into a chamber. Revolvers can use moon clips so you can reload all rounds at once. Jerry Mculek (idk if that's how to spell his last name) has a couple videos where he's shooting revolvers and getting rounds on target after a reload with moon clips faster than most trained men could reload a semi auto handgun. For anyone still reading have fun learning about firearms and teaching others what you know as well! The world's a better place when you realize that none of this really matters and you can sleep easier when you don't sweat the small stuff. But it does pay off to become educated on the things that interest you!
@killeralltires When a vast majority of semi auto firearms use magazines, it's the proper term, unless someone has a Garand or a wheel gun, etc. Then, call it an En Bloc clip or Moon clip as needed. It's a pet peeve of mine that causes my tism to flare, as do most errors that are so easily avoided. It's the same when someone calls an internal combustion engine, a "motor."
I'm salty because I grew up in the 80s with a step-dad who didn't tolerate mistakes, and I'll leave it at that. That said, he taught me a metric fuk ton, and I'm grateful for it.
@@10mmbestmm81 For the record, it's "soda" and not "pop"🤣
12:00 -- Did you just... make a Schrodinger's Cat joke? 😀 (Also, he's called "Meowser?" LOL)
Editing around 3:15 is freaking awesome!!
Can't wait to see you And VGG together on the Camino!
Would be super fun to see derek as a guest on the range for a whole episode, the 2 best youtubers! Just awsome😊
Yes!! 2 of my favorite creators together!! More please?!?!
Didn’t even know they knew each other that was surprising to see him at the end. I can here him saying 9milimetrey boom stick firing hotter than the studebakers sparkilator
@@Dingowar11 They met each other because of Cleetus McFarland's Crown Vic racing and burnout competitions
That would be amazing
Derek is a shooter. My guy handled that like a champ
What! An! Awesome! Video! Great job Matt! Also cameo from Derek from VGG! Freaking sweet. Then on top of that an full auto mp7! Wonderful entertainment man! Keep ‘em coming. Lastly how much in ammo do you think this video cost to shoot? Thanks again!
Mat I’ve been watching since mid 2019 and love every video keep up the good work wish I could actually meet ya
The way he roasted Brandon at the end was gold 🤣 Also lovely MP 7😍
We need a full episode with Vice Grip Garage
Glad you got it fixed.
That's amazing. Thank you again Matt for another awesome video.
I loved the end with Derek I hope yall made a full video together but I know Derek is a busy guy just like you Matt
The main purpose of the tungsten powder inside the carrier is to reduce “bolt bounce”, which can be a problem on high cyclic rate full auto guns. It also may reduce the impact force of the piston, but not the main purpose.
Yep, bolt bounce can cause an out of battery detonation, which is a really bad thing, specially on a polymer-framed gun.
It's to prevent the bouncing of the carrier, so it locks it directly in place.
Bolt bounce is no issue with hk gus, as the bolt 7s hold back with a spring. If you move to the bigger calibers, the primer is less sensitive, the bolt is free floating...if the initial impact does not ignite the round, a bit bouncing around won't have any affect.
HK used the tungsten powder in the mp5 , G3 and G8 , and I guess in the newer weapons (like hk 417) as well.
You’d think either of those idiots would have known that. They clearly don’t pay attention or watch Ian’s videos when it comes to explaining why some guns are made the way they are.
11:28 was not expecting that 😂💀😂
That's some seriously cool SDI stuff, I love it! Nice to see that you prevailed. Ha ha , can't wait for the 50 cal.👌👌👌👌👌👏👏👏👏👏👌👌👌👌
I was expecting to see Cody show up at any moment to at least shoot the MP7 that he can't own. Also, with the crap that Vickers is going through, make sure you schedule those demos with the local police, so they can document how helpful it is for them to have access to these tools through you 😂
I'm sure this won't be a problem for him. With the range coming very soon and probably open to law enforcement for training. I can't believe what Vickers was doing. I'm kinda glad he busted. I don't think these laws should even exist but fair is fair. If I can't just buy one, than he shouldn't be allowed to do a work around. Even tho all gun laws are a violation to the second amendment
@@cliff4695 Can You explain "what Vickers was doing" wrong? I am new to that and can't find any information on it.
@@marlenakiepinska1190the only way for a "civilian" to legally possess a machine gun built after 1986, is to get an FFL and Special Occupational Taxpayer stamp, AND then show that local law enforcement or military agencies/units are interested in and want to test fire the gun. There's a bunch of rules to it but that's the basics. I don't know the Vickers case specifically, but it sounds like he tried to use this as a work around to get his hands on machine guns for personal use.
@@marlenakiepinska1190 aksailor basically just laid it all out. He also used his law enforcement hookups for favors, for his friends. They would import "illegal" guns into the US, sheriff buddies would rubber stamp it. This is all good and fun but, the law enforcement buddies never used it for training and some of them ended up being sold, which is another huge mistake. I know it was over 100 items, not sure how many were sold. Hes basically fvcked and could stand to lose everything, over this, including decades in prison.
@@cliff4695 Thank You for summing it up. To be clear I am not American and I do not live in the US, tho I do support the idea of 2A. I even took class from James Yeager when he was in EU and my husband and I were invited to his place, only my husband couldn't get visa but that doesn't matter. Say what You want but after reading all of this I can say that Vickers is a true American, a free man who doesn't give a fuck about some virtual laws that the people who are calling themselves "leaders" are making. These people also make You and Your buddies believe that there are limits for people like You but not for them. What Vickers did was awesome and true and I will support him in any possible way, fuck it, I'll even send some money if there will be a need tho I do earn roughly 900 dollars a month. I think You and the other guy from comments need to grow a set of balls but I guess You live happily in Your comfort zone and You are to scared to sacrifice anything for Yourself and others... Thank You anyway for a quick response but I can read between the lines that You are 1) beta male that is scared of the feds in any social form 2) You are jaleouse of Vickers idead of how to fuck the government 3) You are probably constructing a plan to diss me which is absolutely fine... the only thing is that if they will lock Vickers in prison he will be respected there and will be remembered by true patriots as a great man, You on the other hand will be thinkig like: - why me?! while standing on the edge on the ditch. Have a good one and please, try to think about other people in a good way. Not everything which is more dangerous or more complicated than You can comprehend is bad
So happy Derek got to play with the MP7.
That’s so cool I also binge watch Vice Grip Garage, it was cool to see him on your video.
The box with the cat hilarious, you da man Matt
At the beginning I was wondering if Derek was going to put in an appearance... I was not disappointed! "It runs". Classic!
I love how it was easier for Matt to get a technical with a full auto ma deuce on the back than it was to get a full auto mp7 lol
The editing is very well done especially when the mp7 is shown on the workbench. Good shit
Epic! Derek: BRrrrrrrRRP "It runs!"
Should weigh the broken bolt carrier and weigh the new one to see how much powdered tungsten is actually in it so the broken carrier can be repaired if need be..
yup, fix the old one and keep the new one on the gun. Always have a spare if its needed.
Slightly unfiltered Matt is the best kind of Matt! Hilarious video! Now I want an MP7...
Powder may help with bolt bounce. Bolt bounce is more of an issue with full auto. AR15 has floating weights for that reason. Not needed for semi but it's just stayed that way from the lineage. Awesome content
those skits are some of the best you've done
I'm glad the cat got out. Its handy that you had a tool for that.
Also, the intros recently have been really good. Well done.
Having a full auto MP7 is the equivalent of being forklift certified
I've been certified through like 6 businesses. Where my mp7?!! 😂
@@ericraymond1274
You should have had 6 by now. Maybe the guy above is talking bullshit.
@@WH250398 🤣
@@ericraymond1274H&K's just taking their sweet time issuing them to forklift certified operators
Nope.
Awesome H&k mp7 firearm glad you got it fixed thanks for sharing
I was excited to see it work as well
The demo ranch intros never get old😂
Derek; It runs!
What a smooth operator!
lol wasn't expecting the special guest at the end! 👍👍
I like this format and props to that guy
I was dying when you solved all the problems with the MP7. Absolutely hilarious episode.
Homer Simpson would approve.
It was dumb and unsafe
That intro was hilarious, does the MP7 cancel out the tape measurement?? Now we know why Donut wants one so bad!
That's awesome. A super rare loot drop!
Omg! That skit with mikey and the new guy that is too happy 😂😂😂 im freaking dying!
MP7 man. Not the hero we need, but the one we deserve.
That MP7 (like most H&K full auto pistons) should have a gas regulator to work with a suppressor.
It doesn't.
@@skepticalbadger if not, that's a real shame.
Over bored and flow through for the win ?
Matt is so excited on this 1
We need more modern day problems require an MP7 skits! Those were so funny they had myself and my daughter rolling😂😂
Intro was perfect, I would love to see Caleb and Lenny on the ranch or vice versa
You can tell just how happy Matt is that he's got a working full-auto H&K MP7
i mean who wouldnt be
Loved seeing Derick at the end enjoy the mp7
great video and was a good laugh when needed
VGG mag dumping an MP7 was not something I was every expecting to see, but Im all for it
We want to see Joerg from the Slingshot Channel on Demo Ranch. He says he'll come if he's invited but he won't ask.
omg yes!
That would be cool...
That would be one of the best collaboration vids ever
Full auto crossbow would be a nice addition to the vids plus I think Joerg would be delighted to shoot many of the firearms.
Definitely
Oh snap !! The bonus footage FTW VGG !!
Love me some PSD. Cool to see they were able to help you out.
There, there, Donut. You'll get your hands on a WORKING FULL-AUTO MP7 at some point~! Thanks, Demo Crew, for the fantastic video~!!!
Derek shooting the MP7?…
I’ll be dipped.
I already followed both of you guys but.. respect level increases for both vice grip garage and demolitionranch allllll day long
This is one of the best episodes ever!!!
Ayyye that's cool of Derek to stop by. I love Vige Grip Garage. Guy seems like a straight shooter.
That got resolved SO FAST! Way to go demolitia
Man I belt it felt good to get that thing fully working again. What a piece!
That thing is freaking awesome sir.
Not gonna lie, this is your best video. Very hilarious! 😂