Absolutely love the content, but you two need your own channel! You do such amazing work, and such great camerawork! Keep it up everyone involved with litebrite!
It’s the Chris & Beck Show! Crazy Chris and his camera antics and Buff Beck and her Built Builds! Nice job kids - “weld-done”! Jeeps are so much more complicated than they need to be. I imagine a “modern” body with all its comforts mounted on a stripped and built chassis, with fewer electric and computer gizmos but stronger and easier to work on. Will we ever see biographical videos about you two? LiteBriteNationBuildsBetter!
Awesome video...working in the shop....Master tech and young padawa..teaching and always learning...you two are wonderful....thanks for showing the build and these shop videos....egarly awaiting your next video.....Safe travels
Chris, you ain’t lying about north ridge. I ordered a JE Reel drive shaft, on the site it said back order, and it was at the house in 5 days. Bro, life changing.
Video production is fantastic ! Chris is such a natural, informative and concise. LBN video’s have come so far from when Kev and Brit first started…….SUPERB ! I feel as though I’m watching a professional studio produced video ! It may sound like I’m kissing @$$, I’m serious ! I can’t believe there’s only a couple hundred thousand subscribers !
I love all the litebrite stuff but I’m really liking the Chris and Beck stuff, Chris is very knowledgeable and I like that Beck digs the mech stuff and she has a great smile
I don’t watch all the time but I love watching and today was the first day that I got to se back I think you’ll do great and I promise I’m only watching Laura🙏💕💕💕💕💕💕
Thank you for the amazing detail and bringing us along on your builds. You've revived me in watching this channel again. I always enjoy your builds and comments! Don't change anything, especially your humor.
Inspiring... Chris and Bec make this look SOOOO EASY!! Like.... "it would be so easy to drive my Jeep to Lite Brite and have them un-mild it" ... that kinda easy :).
So sick! Nice work! Do y'all ever worry about removing the fender liner except for the "shelf"? Like, catching damage from kicked-up rocks on the highway or branches etc out in the wild? Specifically with the coolers with fins (rad etc) and hoses/electrical.
Really like the build side of the channel! Can’t wait to own a Rubicon and do all this to it! For now it’s XJ trail ridin! Which for NC ain’t to bad! Not really anywhere big to go close by!
Who is your daddy! Great job guys once again perfect job between teaching and entertainment... Bek get your butt in the show... keep up the hard work I'm learning alot watching you both work... The Banks family
I would have notched the slider bracket instead of the rocker. Also, I feel like those sliders are a few inches too short. I run Poison Spyder ones similar style on my JK. They are only 1" short and I still destroyed the end of my rockers. :( These I fear will be even worse.
(CHRIS) just a FYI harbor freight has a great riv-nut tool that works great. I’ve used mine for years and several, several times. It’s about $40-$50. It’s the bolt cutter style
The best way on blind nuts. Tighten the nut you have and not the bolt. Turning a bolt on the threads you are drawing in causes unnecessary stress on the threads.
Dawg I lov ur style, just get after it! U know what time it is, u know what to do and u know how to ‘get it’!! One of my favs tho is that I can tell u like to party!(as do I) My kind of brutha! Work hard, play hard. Chris’ episodes are always my fav! Ur tha man dawg! 🤘🏻 ☠️SoCal909😎
I noticed Bec wasn’t wearing her new respirator while welding! I know she was timing and not mugging - but wouldn’t the new slimline respirator work nicely there also?
Diesel content! 😍 this is great, and you’re right Chris, Northridge4x4 is incredible. Pretty much my entire build is parts from Northridge4x4. I need to check out that Apex steering booster. I was running 37” milestars and my 2020 JLRUD and I always get steering fluid temp warnings while crawling. Now, I’m running Nittos new 38” trail grapplers-going to need all the steering help I can get. I’m still waiting on PSC to put out hydro for the diesels. Have y’all happened to hear if they’re working on something?
Chris and Bec, you guys need your own channel. Separate channel from Lite Brite but with lots of corroboration. That would be awesome I think. I learn so much from each of you, Kevin, Brit, Bec, and Chris that I want more content from each of you. You all rock!
There lies the problem sir, we (Bec and i) don't create enough content to release fast enough. These builds take a few days to complete. And to stay within the algorithm of RUclips, we would have to post every week. We have a lot of other things going on that we have to work together. Bec and I also don't edit.... we are fabricators, not producers. That's why this works well for all of us.
Wouldn't weldable primer been a good idea so the frame where you ground all the paint off isn't left exposed to any moisture that would get behind that slider mount?
Chris is starting to REALLY get the hang of these vlog style videos. SO GOOD!
Dude. I was so sick. Haha. Thanks tho
Chris and Bec. you two are an amazing addition to the Lite Brite channel.
I absolutely love that you're showing the R&D portion of the process.
Great job! Chris, and Bec you are the guys. I totally enjoyed this whole 35 mins. Fantastic, keep this content coming!!
What a way to start the day, a Bec and Chris build!!! Most excellent, you guys rock.
I'm ending it
This channel has become the perfect mixture of off roading, and how to/instalations.
I love the builds with Chris and Bec! They do phenomenal work together! Much love from Louisiana
Nice to have a strong ( and lovely) helper in the shop. Vertical MIG, Nice work work Bec.
Wow he beat the crap out of that skid plate jumping curbs at the mall 😂🤣😂
Absolutely love the content, but you two need your own channel! You do such amazing work, and such great camerawork! Keep it up everyone involved with litebrite!
Great video guys. Y’all have extended the Lite Brite family and it’s a win win for all.
More than most know lol. Personally, I think the editing is on ponit...but I am biased hahaha
Chris and Bec are killing it love watching them learning a lot!
the addition of yall to the channel is amazing! just waiting on the attached Gym, and Meal prep shop haha
colormatched Powdercoat on those steps wouldve looked so good!
It’s the Chris & Beck Show! Crazy Chris and his camera antics and Buff Beck and her Built Builds! Nice job kids - “weld-done”! Jeeps are so much more complicated than they need to be. I imagine a “modern” body with all its comforts mounted on a stripped and built chassis, with fewer electric and computer gizmos but stronger and easier to work on. Will we ever see biographical videos about you two? LiteBriteNationBuildsBetter!
We love the addition of Chris and Bec/Bec and Chris videos! Keep it up....please. See you guys in Pa.
MAN! I wish I had mechanics like Chris and Bec here. I worry about the details and whether my local guys get them right.
That was awsome.. love how you guys build these jeeps going from mild to wild.👍👍👍👍👍👍👍👏👏👏👏👏👏
Awesome video...working in the shop....Master tech and young padawa..teaching and always learning...you two are wonderful....thanks for showing the build and these shop videos....egarly awaiting your next video.....Safe travels
Another top video by Chris and Bec. Amazing to see Bec growing in confidence in front of the camera with each video. Jason
For the e brake cables, find a wrench that fits over the front opening and slide the wrench back towards the teeth, the cable will slide off easily
Another favorite Sunday video, thanks you two 👍🏼
Chris, you ain’t lying about north ridge. I ordered a JE Reel drive shaft, on the site it said back order, and it was at the house in 5 days. Bro, life changing.
Video production is fantastic ! Chris is such a natural, informative and concise. LBN video’s have come so far from when Kev and Brit first started…….SUPERB ! I feel as though I’m watching a professional studio produced video ! It may sound like I’m kissing @$$, I’m serious ! I can’t believe there’s only a couple hundred thousand subscribers !
I love all the litebrite stuff but I’m really liking the Chris and Beck stuff, Chris is very knowledgeable and I like that Beck digs the mech stuff and she has a great smile
I don’t watch all the time but I love watching and today was the first day that I got to se back I think you’ll do great and I promise I’m only watching Laura🙏💕💕💕💕💕💕
Bec and Chris what a team. Wish I could have ya build my truck. Great job guys
Thank you for the amazing detail and bringing us along on your builds. You've revived me in watching this channel again. I always enjoy your builds and comments!
Don't change anything, especially your humor.
These are really great videos the camera angles are great. Nothing is shaky the instructions are perfect. A +
I always enjoy seeing the builds and great explanations of everything and then later being able to see most of the builds in action as well
Awesome video you two, teamwork is dreamwork!
Great job. Great build. What a transformation, what a team! Awesome job Lite Brite Nation!!!
Chris I detect some KOH hangover in your voice? Great job you two on this diesel build👍🔥
Always enjoy the build episodes!!! Thanks for showing off your amazing abilities.
Looks great. It's not out of control and much more capable. Well done.
Brown Santa!... we all LOVE Brown Santa!
Great video! That was fun to watch.
Love those standard wheels it's a shame they don't make them in a 17×9, great vid guys good to see some shop action🤙🇦🇺
I agree. I actually like the look of these wheels. I have 35’s on mine and don’t plan to swap them out.
This was a fun video to watch. I am loving the build videos.
Good job Bec n Chris. Keep um coming.
I use a box end wrench to squeeze the e brake cable clamps, slide it down the cable and tap it over the clamps to compress them
Amazing, you make it look so simple
SO MUCH TALENT!!
Northridge also has live inventory on there site.Thank you for your time.
Awesome idea for the rivnuts!!
Bravo, great build guys!!!
I really like the stock wheels on there!!! At the end cool cool I really enjoyed it ✌️
Inspiring... Chris and Bec make this look SOOOO EASY!! Like.... "it would be so easy to drive my Jeep to Lite Brite and have them un-mild it" ... that kinda easy :).
Amazing! Those sliders are as beefy as Bec’s hiney 😈
Nice to see a Diesel in the garage.
So sick! Nice work! Do y'all ever worry about removing the fender liner except for the "shelf"? Like, catching damage from kicked-up rocks on the highway or branches etc out in the wild? Specifically with the coolers with fins (rad etc) and hoses/electrical.
Pretty cool install on that jeep.
Awesome build from a great team 💯🇺🇸🤘🏻😎
Really like the build side of the channel! Can’t wait to own a Rubicon and do all this to it! For now it’s XJ trail ridin! Which for NC ain’t to bad! Not really anywhere big to go close by!
Don't know what you guys are doing for Chris' audio but it is on point. Another fantastic build. Where did Bec learn to weld?
Shop vids are so good!
love Chris and Bec episodes.... this summer might get pretty busy so two channels might be the answer.
Love my 21 JLUR Diesel with Rock Krawler 3.5 X Factor Falcon 3.5 E-adjust and 37's!!!😃
Awesome love these videos. Chris & Beck Awesome work.
Thanks for explaining Chris for those of us that can't weld
Who is your daddy! Great job guys once again perfect job between teaching and entertainment... Bek get your butt in the show... keep up the hard work I'm learning alot watching you both work... The Banks family
Chris! little baby hose clamp for those ebrake cable ends! itll pull all the tabs in at once!
Another Awesome job by Chris and Bec , ❤️🙂👋🇳🇿
Enjoy watching you two wrenching.
Great video Chris and Bec!!!!
your voice sounds like KOH got ya a bit!
I would have notched the slider bracket instead of the rocker. Also, I feel like those sliders are a few inches too short. I run Poison Spyder ones similar style on my JK. They are only 1" short and I still destroyed the end of my rockers. :( These I fear will be even worse.
Hey kids..., yup! Lite Brite's Chris & Bec doing their thing as only good mechanics do!
Lite Brite Nation..., rocks!
That’s the best example of why you go a re-torque all your nuts and bolts!! Can’t believe the amount of missing hardware
Lite brite nation!
Use a small hose clamp for the ebrake clip!!! Works wonders!!!
Awesome build video!
Pheebs really needs some love. Any chance I’ll be seeing her at EJS?
She will be there. But I am gathering parts for her still. Maybe by the fall, she'll get blown apart.
That looks great
Loved the install
(CHRIS) just a FYI harbor freight has a great riv-nut tool that works great. I’ve used mine for years and several, several times. It’s about $40-$50. It’s the bolt cutter style
The best way on blind nuts. Tighten the nut you have and not the bolt. Turning a bolt on the threads you are drawing in causes unnecessary stress on the threads.
Very nice Jeep mods, by THE PROS.
Bec is boss!!!🤘🤘🤘
Another awesome video! Even if I don't have a Wrangler 🙂
Dawg I lov ur style, just get after it! U know what time it is, u know what to do and u know how to ‘get it’!! One of my favs tho is that I can tell u like to party!(as do I) My kind of brutha! Work hard, play hard. Chris’ episodes are always my fav! Ur tha man dawg! 🤘🏻 ☠️SoCal909😎
Nothing like a Lite Brite Nation Video as I prepare for my colonoscopy. Oh boy!
Awesome upgrade
Chris, you should do a video on why those control arm bolts come loose and how to prevent it! I’ve lost two 🤦🏻♂️
I noticed Bec wasn’t wearing her new respirator while welding! I know she was timing and not mugging - but wouldn’t the new slimline respirator work nicely there also?
Nice job Bec & Chris 😜
One of the best videos yet love be the fab
Thanks for sharing. Greathings from san andres island, colombia
Some great content and i dont even own a jeep. Cant believe i just sat through 30+ minutes while sipping on hot chocolate
Diesel content! 😍 this is great, and you’re right Chris, Northridge4x4 is incredible. Pretty much my entire build is parts from Northridge4x4.
I need to check out that Apex steering booster. I was running 37” milestars and my 2020 JLRUD and I always get steering fluid temp warnings while crawling. Now, I’m running Nittos new 38” trail grapplers-going to need all the steering help I can get. I’m still waiting on PSC to put out hydro for the diesels. Have y’all happened to hear if they’re working on something?
No idea. But hopefully!
watching this video and ad commons on, its LiteBrite talking about the Forged 4x4 Bronco give away
Nice Snapon tool's, sweet Miller welder, nice shop but no heat, WTF. You guy's need a used motor oil furnace or something other than an LP turbo.
Haha. One upgrade at a time. It is an insulated building, it warms up quick.
There's a special place in Hell for folks who take their vehicles in for a bunch of work when its still filthy. Lol. Great video you two!
love those bilsteins..just remember to keep them clean: the finish hates road salt and grime!!!
Awesome looks amazing 😎👍
Chris is a genius and Bec gets more beautiful everyday!
I am a diesel fan so looking forward to this.
Cool Build
Chris and Bec, you guys need your own channel.
Separate channel from Lite Brite but with lots of corroboration. That would be awesome I think. I learn so much from each of you, Kevin, Brit, Bec, and Chris that I want more content from each of you.
You all rock!
There lies the problem sir, we (Bec and i) don't create enough content to release fast enough. These builds take a few days to complete. And to stay within the algorithm of RUclips, we would have to post every week. We have a lot of other things going on that we have to work together. Bec and I also don't edit.... we are fabricators, not producers. That's why this works well for all of us.
Wouldn't weldable primer been a good idea so the frame where you ground all the paint off isn't left exposed to any moisture that would get behind that slider mount?