My Kranzle doesn’t shut off when I release the trigger, when I pull the trigger I can hear what I believe is either the motor or the pump turn on, but then when I release it, something stays on. It isn’t as loud as when I’m pulling the trigger so I feel something is shutting off, but the Kranzle isn’t completely shutting off. I followed the steps to this video but I’m still having issues. The gauge stays at 0 the entire time, even when the trigger is pulled and released.
I slept on it & the machine is in perfect working order now lol. However, I made the mistake of wiping off what I thought was random gunk from the control piston & now think it was what you guys use as lubricant. I heard in another video you guys use Vaseline as lube, can I use that here as well?
Hi! My Kränzle 1150t just ”humz” when i put the power on. Then after aprox 10 sec the power button switches back to off. Do u guys have any clue what could be the problem? When the machine is turned off, water is comming from the pistol when I push the handle. Oscar from Sweden😊
I have a question about my HD7... I don't know if it's a problem or not. When no nozzle is connected to the gun, there's basically no pressure. Is that supposed to be the case? When I connect the gun (I have a Mosmatic) the pressure doesn't go over 1000psi, even when the pressure adjustment is maxed out. Is that normal?
Hi. Technically speaking the pump only MOVES water at whatever GPM. The NOZZLE orifice size is what creates the pressure. It's like a balloon. When you pinch the end, the air stream pressure increases. What size nozzle do you have on your Mosmatic gun?
Josh. Very helpful vid and may be the cause of the problem I am having on my 1122 right now. However, just a suggestion that you lower the camera angle a bit so we can actually see you working on the specific area. These vids are really helpful to the DIY'er who doesn't want to send an 80 lb. machine to a dealer to fix it. Thank you!
@@kranzleusa5846 Problem solved! Motor would not shut off. Likely some build-up of dirt or minerals on the piston or in the piston housing. Vid was super helpful to diagnose source of problem and also with order of the parts (brass washer, O ring, etc.). Thanks Josh! Shout out also to Patricia at tech support who spent way more time with me than I deserve!
Hlw josh, i am facing problem in my machine over fullystop function, i have changed my control piston and checked for all the leak with gun and other component and microswitch also doing fine job,but when i release the trigger in the gun it is not fully stop and regulator piston also vibrating ,can you suggest me solution for this problem
Hmm. What kind of sound does it make when "NOT FULLY stopped"? Got any video? Please do send a tech support ticket at KranzleUSA.com or give us a call. 800.544.1188
Sorry to hear this. Sometimes the trip from Germany to the USA to customers can cause problems. Given the unit is new, this should be a warranty issue. Please call us to resolve. 800.544.1188 M-F 9-5 EST.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
My Kranzle doesn’t shut off when I release the trigger, when I pull the trigger I can hear what I believe is either the motor or the pump turn on, but then when I release it, something stays on. It isn’t as loud as when I’m pulling the trigger so I feel something is shutting off, but the Kranzle isn’t completely shutting off. I followed the steps to this video but I’m still having issues. The gauge stays at 0 the entire time, even when the trigger is pulled and released.
I slept on it & the machine is in perfect working order now lol. However, I made the mistake of wiping off what I thought was random gunk from the control piston & now think it was what you guys use as lubricant. I heard in another video you guys use Vaseline as lube, can I use that here as well?
Yes.
Hi can the K7 be changed to a start stop machine if i buy the start/stop pressure switch and wire it in?
This may be possible. Call and speak with Josh Lee or Patricia. 800.544.1188
Can this cause a fuse to blow when you release the trigger from your gun after starting the washer
Releasing the trigger turns OFF the power.. Can't see how that would cause a fuse to blow.
Hi!
My Kränzle 1150t just ”humz” when i put the power on. Then after aprox 10 sec the power button switches back to off. Do u guys have any clue what could be the problem?
When the machine is turned off, water is comming from the pistol when I push the handle. Oscar from Sweden😊
A hum usually means the capacitor is shot. Super easy to replace. Here's a video:ruclips.net/video/aE_s1wv4ipI/видео.html
Would this issue with the control piston cause any short cycling issues?
Hi. We are checking with Josh Lee. Will have a detailed answer shortly.
I have a question about my HD7... I don't know if it's a problem or not. When no nozzle is connected to the gun, there's basically no pressure. Is that supposed to be the case? When I connect the gun (I have a Mosmatic) the pressure doesn't go over 1000psi, even when the pressure adjustment is maxed out. Is that normal?
Hi. Technically speaking the pump only MOVES water at whatever GPM. The NOZZLE orifice size is what creates the pressure. It's like a balloon. When you pinch the end, the air stream pressure increases. What size nozzle do you have on your Mosmatic gun?
Josh. Very helpful vid and may be the cause of the problem I am having on my 1122 right now. However, just a suggestion that you lower the camera angle a bit so we can actually see you working on the specific area. These vids are really helpful to the DIY'er who doesn't want to send an 80 lb. machine to a dealer to fix it. Thank you!
Thanks for the feedback. Will relay to Josh. Glad it helped. Noted on the camera angle. Hopefully the close ups gave the details you needed.
@@kranzleusa5846 Problem solved! Motor would not shut off. Likely some build-up of dirt or minerals on the piston or in the piston housing. Vid was super helpful to diagnose source of problem and also with order of the parts (brass washer, O ring, etc.). Thanks Josh! Shout out also to Patricia at tech support who spent way more time with me than I deserve!
Hlw josh, i am facing problem in my machine over fullystop function, i have changed my control piston and checked for all the leak with gun and other component and microswitch also doing fine job,but when i release the trigger in the gun it is not fully stop and regulator piston also vibrating ,can you suggest me solution for this problem
Hmm. What kind of sound does it make when "NOT FULLY stopped"? Got any video? Please do send a tech support ticket at KranzleUSA.com or give us a call. 800.544.1188
brand new unit with this issue right out of the box,....
Sorry to hear this. Sometimes the trip from Germany to the USA to customers can cause problems. Given the unit is new, this should be a warranty issue. Please call us to resolve. 800.544.1188 M-F 9-5 EST.
@@kranzleusa5846 watched a few of your vids and resolved the issue myself thankfully!
Helpful but so frustrating that the video doesn't show the actual mechanical part... camera angle is bad here
Thanks for the feedback. We can't edit the video but will try to improve in future videos.