Very informative video! Does Camworks still publish the Post Writers Reference manual? The one I have is very outdated but I haven't seen one one in a long time.
Great information. I’m newbie to CNC\CAM. I’ve been working as manual machinist for some years now. You explain and show the critical information clearly with bullet points and no technical Jargon technical. Thank you so much for sharing this valuable information! #kelwinkwel
Thank you for the instructional video. Have you made a video detailing the Kinematics portion? I have not found any information on the settings for the CAMWorks 5 Axis Simultaneous Parameters. I was able to set up the Spindle Direction and the Z Base Points to match my trunnion offset and 3+2 Axis works beautiful. But I can not post G Code for any multi surface moves, it post all 3+2 moves and skips the multi surface.
Hi Daniel, Can I use for cut a full circle the I, J, K addresses and for cut other degree circle the R address in the same postprocessor?? for have a Post as this example: (BEGIN CUTTING BLOCKS) ; G00 Z-1. (Rapids to Z-1.) ; G01 G41 D01 X-0.5 Y1.4 F20. (Linear move) ; (Cutter comp on) ; G03 X0 Y0.962 R0.5 F25. (Arc into thread) ; G02 J-0.962 Z-1.0625 (Cut threads while lowering Z) ; G03 X0.5 Y1.4 R0.5 (Arc out of thread) ; G01 G40 X0 Y2.4 F20. (Linear move)
I get an asterisk before certain line numbers, like N0041 (3/8 EM CRB 2FL 1 LOC) N0051 G28 G91 Z0 N0061 G90 T07 M06 N0071T102 *N0081 G17 G55 X1.45 Y.825 M03 S18000 N0091 G43 H07 Z.75 *N0101 Z.6 N0111 G01 Z.25 F100. What does that mean, and how do I get rid of it? Thanks! Edit: I also have an issue where my machine wants tool numbers in the form of 20xx, so tool 7 would be T2007, but it wants H and D codes to be just the tool number, so H07/D07, and if i set the tool number in my TechDB to 2007, and then the compensation value in the post to -2000, I get T2007, D07, but still get H2007. How can I get around this?
Hi, My name is David, I’m from Venezuela, and I am learning on this UPG-2 and EC Edit-2 by myself. It’s not easy and I have very queries. Do you can help me with this? My Question is the follows: - Is It possible activated the parameter “Sub. Peck amt” in Tap Hole? The Drill operation if it have this Parameters.
Hi. we have a new machine, a Chevalier 2040L , and i need make the post processor, i checked the manual and it says that the controller is similar to a Fanuc 0M, and i i just have to chance G20 or G21 for G70 or G20, but the problem is when i use the example of the fanuc 0m in the UPG, i can't find where i can change G20 for G70, can you help me with that?
I have been trying to get a multiaxis toolpath to generate in CamWorks and find the following: All of the .SRC files that are in the UPG MillSourceTemplates do NOT post code for Multi Axis, I get all of the code except that toolpath, if I try and only post the Multi Axis I get just the header and M30 ending. If I use the M5AxisTutorial.ctl in CamWorks, it posts all the Multi Axis G Code fine, However the POST is not right for my machine. Finally if I try to open the UPG Tutorial Source Files, NONE of them will open in UPG, they ALL say "Source file was not created by UPG or wrong format, Please select another source file." Does anyone know where to get a working 5 axis source file?
In your src file use ec editor to add *Fanucm (*Fanuct if lathe, *fanucmt if millturn) in the very first line. Then edit the library paths to your .lib and mill.lib (latter in the masterlibrary folder). Now open the file with your upg.
I wouldn't suggest editing in upg even if u got it open I tried and it wouldn't compile. It also rearranges all the lines and wouldn't compile. Only use it for compiling.
Hi. Please tell me how can I edit this out? G02X5.095Y-0.815R1.5 X4.518Y-1.792R1.5 Wrong. Error. G02X5.095Y-0.815R1.5 G02X4.518Y-1.792R1.5 Correctly. No mistake. G02 G03 commands must be written in each frame. I don't know how to do that.
![The Difference Between SOLIDWORKS CAM and CAMWorks [Webcast 2018]](http://i.ytimg.com/vi/PRXMwn93i7Y/mqdefault.jpg)
This is exactly what you are looking for. Thank you
Very informative video! Does Camworks still publish the Post Writers Reference manual? The one I have is very outdated but I haven't seen one one in a long time.
Great information. I’m newbie to CNC\CAM. I’ve been working as manual machinist for some years now. You explain and show the critical information clearly with bullet points and no technical Jargon technical. Thank you so much for sharing this valuable information! #kelwinkwel
Thank you for the instructional video. Have you made a video detailing the Kinematics portion?
I have not found any information on the settings for the CAMWorks 5 Axis Simultaneous Parameters.
I was able to set up the Spindle Direction and the Z Base Points to match my trunnion offset and 3+2 Axis works beautiful.
But I can not post G Code for any multi surface moves, it post all 3+2 moves and skips the multi surface.
Hi Daniel, Can I use for cut a full circle the I, J, K addresses and for cut other degree circle the R address in the same postprocessor?? for have a Post as this example:
(BEGIN CUTTING BLOCKS) ;
G00 Z-1. (Rapids to Z-1.) ;
G01 G41 D01 X-0.5 Y1.4 F20. (Linear move) ;
(Cutter comp on) ;
G03 X0 Y0.962 R0.5 F25. (Arc into thread) ;
G02 J-0.962 Z-1.0625 (Cut threads while lowering Z) ;
G03 X0.5 Y1.4 R0.5 (Arc out of thread) ;
G01 G40 X0 Y2.4 F20. (Linear move)
I get an asterisk before certain line numbers, like
N0041 (3/8 EM CRB 2FL 1 LOC)
N0051 G28 G91 Z0
N0061 G90 T07 M06
N0071T102
*N0081 G17 G55 X1.45 Y.825 M03 S18000
N0091 G43 H07 Z.75
*N0101 Z.6
N0111 G01 Z.25 F100.
What does that mean, and how do I get rid of it?
Thanks!
Edit: I also have an issue where my machine wants tool numbers in the form of 20xx, so tool 7 would be T2007, but it wants H and D codes to be just the tool number, so H07/D07, and if i set the tool number in my TechDB to 2007, and then the compensation value in the post to -2000, I get T2007, D07, but still get H2007. How can I get around this?
hi . ive got file of post prosessor generic, for my machine from my reseller , how i can add to come works
hello, excelevideo, I am looking for a FANUC driver for Fusion360 or Alphacam, I have problems with a Router Anderson Selexx 510 FL
It was very good. thank you.
know how to insert a new machine? in the Help menu, there is a tutorial to generate with .Bat, but I couldn't
Hello, how to modify the post processor in order to have T1.1 and not T0101 ? thanks
what is the programming language of camworks post processor ?
it is javascript for Fusion CAM, Inventor HSM and HSMWorks
Спасибо! Информация оказалась очень полезной для меня.
Hi, My name is David, I’m from Venezuela, and I am learning on this UPG-2 and EC Edit-2 by myself. It’s not easy and I have very queries.
Do you can help me with this?
My Question is the follows:
- Is It possible activated the parameter “Sub. Peck amt” in Tap Hole? The Drill operation if it have this Parameters.
Hi.
we have a new machine, a Chevalier 2040L , and i need make the post processor, i checked the manual and it says that the controller is similar to a Fanuc 0M, and i i just have to chance G20 or G21 for G70 or G20, but the problem is when i use the example of the fanuc 0m in the UPG, i can't find where i can change G20 for G70, can you help me with that?
in my compile file, the archive .ctl was not created, you now why?
I have been trying to get a multiaxis toolpath to generate in CamWorks and find the following:
All of the .SRC files that are in the UPG MillSourceTemplates do NOT post code for Multi Axis, I get all of the code except that toolpath, if I try and only post the Multi Axis I get just the header and M30 ending.
If I use the M5AxisTutorial.ctl in CamWorks, it posts all the Multi Axis G Code fine, However the POST is not right for my machine.
Finally if I try to open the UPG Tutorial Source Files, NONE of them will open in UPG, they ALL say "Source file was not created by UPG or wrong format, Please select another source file."
Does anyone know where to get a working 5 axis source file?
In your src file use ec editor to add *Fanucm (*Fanuct if lathe, *fanucmt if millturn) in the very first line. Then edit the library paths to your .lib and mill.lib (latter in the masterlibrary folder). Now open the file with your upg.
@@impactodelsurenterprise2440 Thank you for your suggestion, I will try it out. 😄
I wouldn't suggest editing in upg even if u got it open I tried and it wouldn't compile. It also rearranges all the lines and wouldn't compile. Only use it for compiling.
Hi. Please tell me how can I edit this out?
G02X5.095Y-0.815R1.5
X4.518Y-1.792R1.5 Wrong. Error.
G02X5.095Y-0.815R1.5
G02X4.518Y-1.792R1.5 Correctly. No mistake.
G02 G03 commands must be written in each frame. I don't know how to do that.
In Radius Move mark G02 non modal - . In case of non modal comand just add "!" sign to it.
@@alexeybalagurov2838 Thank!
Hi anyone here ie is done post prosessor for hiedenhain tnc530 control please
😶😶😶😶