HI Engineer, you have calculated the number of blocks thanks for that i have gained alot but you have taken the floor plan as a full rectangle yet there is a portion on the plan which don't have block work . do i need to less the area for this portion?
Yes. There is usually a need to less any portion without blockwork. For example, lintels, beams, door and window openings, and even entrance porch/veranda recess
Thank you for your teaching sir, what about when my dimensions are from center to center hw do u do with outer min girth with deductions of 4/2/(225,1/2)
For the internal mean girth, you used the internal dimensions of 5,600 and 4,600. I think you should have use the IN to IN approach I think u should Add 2/2/1/2/225 to it, am I right?
Nice explanation But my question has to do with the mortar joints. What happens to that, is it not to be deducted too since it also influence the height of the building?
Very helpful video thank you but at 15:00 the final measurements on Door 2 being 0.90 x (2.10+0.225) x 2 = 2.09m2? did you accidentally forget to times by 2 or have I missed something?
Either you join the channel membership which cost #2000 monthly payment or you can buy the compiled videos on Udemy for a one-time payment of #4,500. Here is the link for Udemy: www.udemy.com/course/basics-of-quantity-surveying-taking-off-quantities/?referralCode=D7B4E5FE50904622593A Incase you fail to process the payment (as the case always is for Nigerians) reach out to me on Whatsapp.
I've explained this concept in this my video; ruclips.net/video/hQ6OuW5-TR0/видео.html Watch it and you will probably understand why I did that addition. I hope this helps....
It's very simple,just multiple the height and width of the door or window and add .225 ,then multiple by the total numbers of windows or doors of the same dimensions. Later sum everything up together. Thanks
Adding and subtracting of four conners is only for the calculation of the main girth from what I understand, is that correct sir ? Because you didn't add four conners after calculating the internal girth.
Watch this my video on mean girth and you will understand why we less or add corner in mean girth calculation. It will show you that the adjustment for 4 corners is meant for external girths depending on the type of dimensioning used... ruclips.net/video/hQ6OuW5-TR0/видео.html
Having the length and width alone won't give you the total numbers of blocks to use sir because there are other partition (internal walls) inside the drawing which are meant for toilets, kitchen,rooms, dinning etc. But with the illustration of what he did you can get it. You can not get the total numbers of blocks to use for a two bedroom flat like that without looking into the internal dimensions. Thanks.he will give more details if he get to see your comment sir. I am just a colleague in the profession who acknowledge what he's doing
I've explained this concept in this my video; ruclips.net/video/hQ6OuW5-TR0/видео.html Watch it and you will probably understand why I did that addition. I hope this helps....
@@qsacademy thank you so much you are Really helping people around the world. Pls be explaining the converting unit and point for us the beginners pls sir.
Really no need to subtract the area taken by lintels because you will not purchase half or three quarters of a block anyway. You have to buy complete blocks
Check out this my video on Mean Girth Calculation. It explains where those figures came from. I hope this helps. ruclips.net/video/hQ6OuW5-TR0/видео.html
The void does not affect the blockwork because the only unit needed for calculating the block qty is perimeter length and height. Note that the void will only affect work items covering the floor area or volume.
Adding and subtracting of four conners is only for the calculation of the main girth from what I understand, is that correct sir ? Because you didn't add four conners after calculating the internal girth.
Really well explained, I look forward to more videos like this. May I suggest tiled roofs, patios, reinforced concrete etc
Great thanks to you sir, I would like you to also talk about how to calculate the quantity of sand and cement.
Thank you teacher, you made me learn what I didn't know before thank you very much.
Godbless you for this knowledge
Thank you,we'll explained.
Absolutely amazing
Doing a very good job
Thank you so much, very helpfull
WELL DONE ,THANKS
This was educative... thankyou
Nice one bro. Well understood
GREAT WORK! ...what about the mortar space? again what are you going to use the internal girth for?
Thanks so much for the videos. I will like to see more videos
Good job. God bless
You guys are so amazing. I like that
You should have explained how you got the 4/2/.5/225
I also wish to know that
Yes please 🙏
4 for four items
2 for two half on each wall
1/2 half of the wall or block thickness
225 block thickness
Wow this amazing, thanks a lot
Well done
Good job
Thanks for d lecture
Awsome brov nice one
God bless you good work boss
Very educative
Thanks bro! Hope more to come
Thanks a lot. My question is, 3m which is the height of the building, is it not low? Because 3m when converted is 9.84ft?
@@isaacgberyan3328 Note that 3m is only the block work height. This does not include the roof height
We really appreciate. Please produce videos for superstructure taking off too.
Well explained thanks....can you make vedios on estimating and costing
Nice one
This is amazing
HI Engineer, you have calculated the number of blocks thanks for that i have gained alot but you have taken the floor plan as a full rectangle yet there is a portion on the plan which don't have block work . do i need to less the area for this portion?
Yes. There is usually a need to less any portion without blockwork. For example, lintels, beams, door and window openings, and even entrance porch/veranda recess
Thanks sir
Interesting great job may Almighty bless you
Amen. Thanks
Please we need more of this take off to broaden our knowledge.... Thanks so much
Good explanation....
What is the meaning of the word you used procon.
thanks so much may the Lord bless but please explain how we achieved the 4/2/5/225 , please do same for roofing
From your external main guide, how did you calculate it??
Kudos
U are good keep it up
Awesome
Thank you for your teaching sir, what about when my dimensions are from center to center hw do u do with outer min girth with deductions of 4/2/(225,1/2)
Yes
For Out to out you will deduct
Centre to centre no deduction
In to in you add
Thank u sir I got it right
In external min girth, where do we take measurents, is it from center to center or in to In. thank u sir
Out-to-Out
For the internal mean girth, you used the internal dimensions of 5,600 and 4,600. I think you should have use the IN to IN approach
I think u should Add 2/2/1/2/225 to it, am I right?
Nice explanation
But my question has to do with the mortar joints. What happens to that, is it not to be deducted too since it also influence the height of the building?
O the 10 mm mortar joint.
Is it also advisable for rhe height of a building 🏫 to be 4m or 5m?
@@isaacgberyan3328 It's actually not advisable for the block work height to be 4m to 5m. At most 3.3m block work height is good for a bungalow
On step 1 "less" please explain how and where you are getting a half.
Pls sir for the external mean girth,You less 4/2/1/2/225. Please explain that.thanks so much
Thank you very much sir for this. How about calculating for sand and cement sir?
What about the internal center line "T" junction
You shouldn't consider T-junction when calculating mean girth for clockwork. Only consider it in your mean girth calculation for trench excavation.
I want to join your class. How do I reach you
Very helpful video thank you but at 15:00 the final measurements on Door 2 being 0.90 x (2.10+0.225) x 2 = 2.09m2? did you accidentally forget to times by 2 or have I missed something?
I want know of three bedrooms with kitchen and porch
when did you get the height of lentel! ....I like to thank you for all information you gave us may God bless you
The height of lintel is usually 225mm or in some cases 150mm. It's a constant value.
Thanks for the feedback.
@@qsacademy thank you very much 🙏
Thanks very much appreciate in ur sharing sir. May u please do for roof n external work element. Tq sir ☺️
Your vedio that I downloaded isn't showing again please what can I do to access it back thanks
Either you join the channel membership which cost #2000 monthly payment or you can buy the compiled videos on Udemy for a one-time payment of #4,500. Here is the link for Udemy: www.udemy.com/course/basics-of-quantity-surveying-taking-off-quantities/?referralCode=D7B4E5FE50904622593A
Incase you fail to process the payment (as the case always is for Nigerians) reach out to me on Whatsapp.
The 900 you deducted in step one, represents what? and why did you less it?
I've explained this concept in this my video;
ruclips.net/video/hQ6OuW5-TR0/видео.html
Watch it and you will probably understand why I did that addition. I hope this helps....
And pls do us well by taking off for roof pls 4:28
Thank you for this tutorial greatly appreciate your work. Where can I buy your book someone mentioned in the comments.
gum.co/tIZfM
Am trying to pay with my card
D money was not deducted
Pls can u send ur account details
And pls do us well by taking off for roof pls
Please sir i don't understand where 4/2/0.5/ is coming from
very good lesson however the background noise was distrubing
and also how did u get the calculation of opening door and window
It's very simple,just multiple the height and width of the door or window and add .225 ,then multiple by the total numbers of windows or doors of the same dimensions. Later sum everything up together. Thanks
Please my Boss I want to You to Tutor about The Calculating the quantity of Cement and Cement Mortar.!!!!!!
Hi, how can you be contacted?
quantitysurveyingacademy@gmail.com
how many pieces of block we four-bedroom
Please what will be the volume of the mortor only?
kindly extract the volume of the mortor separately for me. Thank you
Adding and subtracting of four conners is only for the calculation of the main girth from what I understand, is that correct sir ?
Because you didn't add four conners after calculating the internal girth.
Watch this my video on mean girth and you will understand why we less or add corner in mean girth calculation. It will show you that the adjustment for 4 corners is meant for external girths depending on the type of dimensioning used...
ruclips.net/video/hQ6OuW5-TR0/видео.html
What you mean the super structure and sub structure is calculated independently
I think by substructure he's referring to any low walls you may have inside the house e.g. support for built-in cupboards, bathrooms, etc
Nice one but i can i get number of cement in a particular buldin
4:06 can u please teach ur less 4/2/1/2/225 I don't understand it
Watch my old video on how to calculate mean girth of a building
I'm just watching ur video Weldone sir.... but...when calculating for the openings and lintels the last calculations is wrong sir
Where does "less 4/2/.."comes from?
thickness of block, to get the in to in dimension
please how can i calculate two bedroom flat and the length is 11025 and also the brength is 20825
Having the length and width alone won't give you the total numbers of blocks to use sir because there are other partition (internal walls) inside the drawing which are meant for toilets, kitchen,rooms, dinning etc. But with the illustration of what he did you can get it. You can not get the total numbers of blocks to use for a two bedroom flat like that without looking into the internal dimensions. Thanks.he will give more details if he get to see your comment sir. I am just a colleague in the profession who acknowledge what he's doing
Nice one bro, you have any group on social media, like WhatsApp group or Instagram, for us to be seeing update
yes, please scroll right till you get to the about page. you will find all the links there.
How many blocks can build one room tell me
Dear bro what is the mean of "less (4/2/1/2/225)".Please describe briefly
Weldone...but you did not deduct for recess...the building is not a regular shape???
It is a regular shape
Hi
Please u need how u got the 4/2/1/2/225
Watch this video and you will get the perfect explanation for the deduction:
ruclips.net/video/hQ6OuW5-TR0/видео.html
hi, plz i found it difficult to calculate STEP 3.
How did you got 4/2/1\2/225=900 on step one
I've explained this concept in this my video;
ruclips.net/video/hQ6OuW5-TR0/видео.html
Watch it and you will probably understand why I did that addition. I hope this helps....
Why didn't you consider the mortar spaces?
because the mortar spacing is usually considered during the estimation of its unit price
@@qsacademy okay.
The values, in what unit are they? Are they in ( ft or mm or m inches?)
Pls sir be playing with the units pls sir.
I started with mm then converted it to m to get my final values
@@qsacademy thank you so much you are Really helping people around the world.
Pls be explaining the converting unit and point for us the beginners pls sir.
The values are in meters
Really no need to subtract the area taken by lintels because you will not purchase half or three quarters of a block anyway. You have to buy complete blocks
I also saw that, however I think he was trying to calculate total open space, as you could see he wasn't even pleased with leaving out the overhang 😅
I don't understand the less 4/2/1/2/225
Anyone pls who understand where this 4/2/.5/225 come from maybe volunteers will explain better for me,cos its where I'm lost pls
Check out this my video on Mean Girth Calculation. It explains where those figures came from. I hope this helps.
ruclips.net/video/hQ6OuW5-TR0/видео.html
Why didn't you deduct the area where no block walls
Don't understand the calculations you did at the door , window and lintel it gave me different answers
There's something we call boundary conditions which you ignored
The void spaces in ur drawing wasn't deducted sir
Isn't it necessary
The void does not affect the blockwork because the only unit needed for calculating the block qty is perimeter length and height. Note that the void will only affect work items covering the floor area or volume.
OK sir
Many thanks for this
Great job
God bless
This type you choose is quite long and misunderstanding as well.
I have a quiz regarding the number of bricks calculation in a building:- Is there a certain percentage allowed for wastage???
He did say it's 5%
Feet and inches would’ve been way better
The calculation is not clear
Can we chart on whatsapp
Send me a message via my email:
quantitysurveyingacademy@gmail.com
@@qsacademy good morning bro,I need your book on quantity surveying
The price of your courses on Udemy is too expensive, reduce the price to 15-18 pounds and you will get more students.
Thanks for your suggestions. I usually adjust the price to the lowest amount attainable on Udemy from time to time.
What is he even saying
Adding and subtracting of four conners is only for the calculation of the main girth from what I understand, is that correct sir ?
Because you didn't add four conners after calculating the internal girth.