So many options ! I'm going to have to watch that again to help me remember them all. Luckily I'm playing a Game Boy game at the moment so the Sleep Wake works - also there's an in game password system to take me back to the level I was on.
Please please reply if you have any suggestions what to do!!! I was playing pokemon leaf green on gba core and I've had plenty of success using save states and suddenly I'm getting failed saves and failed loads on that game! I tried factory resetting with SD card out. I tried going in a different game saving a state and loading it successfully. Going back into pokemon. No success. This is the first time dealing with this and I've put a good time into my mons :(
Yeah for sure will be making more retro gaming related videos. Have more ideas than I have time to execute them at the moment! You might have caught a glimpse of my retro gaming setup at the end of my 2023 desk setup video when I show some of the rest of the room with my CRTs?
Hey! Im aiming to use the save states as a backup for when the cartridge battery runs dry. Do you know if could be possible to extract the save state from the sd, save it to the cloud for future use?
Hey @@jarc127 ! Yes you could do this. When you create a save state it also writes the actual save file too as .sav as well as the save state so you could back that up. Just be careful with Pokémon games they don’t play nice with save states in my experience.
I just received my analogue pocket today Oct 8 2024. I'm playing Mario kart super circuit Nintendo advance game. When I hit the center button to save the game the memory is grayed out, so how do I save my games? Do I need to put a micro memory card in?
Hey VectorHunter! Yes I think I have a small one on the bottom left side of the screen. Do you know if people are just sending them back for replacement or if they even have stock?
@@LovingTechLife I think this is due to the lack of gap between the screen and the shell, when you play games, the screen heats up and inflates, so it’s a design issue
Hey Super Sonic! Are you using the “Game Saves” where you choose form the game menu or are you using the Analogue Pocket save states? What version of firmware are you using on the Pocket?
RTC still doesn’t sync while using save states even on 2.0. The only way I know to mitigate synchronisation problems is via flash carts explained here: github.com/ninbura/pokemon-on-the-analogue-pocket Unless this is what you are doing I’d be wary of using save states with Pokémon crystal.
@cljoe35 GB Studio saves are saved in /GB Studio/Saves/ and are named with the same name as the GB Studio game but with a .sav extension (e.g. Game.pocket gets Game.sav) Save Games for OpenFPGA cores are in a mirrored folder path based on location of rom files. If say ROM is located at /Assets/gba/common/ the save file would be located at /Saves/gba/common/ with the same name as the rom but the .sav file extension. Haven’t tried but if you copy from one folder to the other and make sure the file name is the same then there is a good chance it will work. Let me know how you go.
Any idea how to make the GBA core load faster? I’m using spiritualized GBA core through pocket sync and it takes like 4-5 seconds to load into a game since it needs to load the core and the bios.
@@LovingTechLife Thank you. Just to let you know, I already watched this video. Still didn't answer my question, do I need a memory card to save by cartridge games like Mario kart super circuit and ninja turtles fall of the foot clan. Because of right now the memory is grayed out
Hey @itsmushfiqXD! Interesting, which cores have you found are doing this? Is it every time with every game? I found in the past I would need to save in game normally and then restart the game to get the sound back. Then future save states from that point may not have the issue.
For some reason I cannot create any save states? Home+up button is not working for me. (I don't even see a message I cannot save) The 'Memories' section also remains in grey. Can anyone help?
@@LovingTechLife OS v1.0b (January 30, 2022) I noticed it's an older version. So I assume I should try updating firmware version ;D I'll try this. Thanks for your quick response
@BitingLion Yep! 😅 Here’s an instruction vid I did - Unboxing the Analogue Pocket: Your Ultimate 2023 Setup Guide ruclips.net/video/Kk2FnvfN6lU/видео.html
I need help i cant even select save states its like shaded gray color and i cant even touch it can someone help me please thank you!!! And when i try to save it to it says save unsupported to on the bottom screen too. Need help!!!
@@LovingTechLife hello thank you it's the latest firmware on there website as of today and not sure why but the save states work for the cartridge but not for the rom games on the micro sd card.
Not all the cores work with save states, I share a lots of the specific cores that will work. Are you trying some that are not in the list? Watch all the video through for help with this if you haven’t already.
I can’t give you a definite answer but like any core it not likely just because they don’t want to, there are technical challenges and other factors that contribute.
Yeah it is a strange omission. Snes safe states would make the pocket complete in my opinion. It would have all the popular consoles covered and have all my emulation on one device
Hey @orthobro7773 ! Agreed, I think the developer essentially has to design the core with save states in mind from the outset. Also there is the issue of how much capacity / how many gates the FPGA chip has and if they are all essentially taken up with the snes hardware and special cart chips then there may be no room left in their FPGA for added functionality like save states. Perhaps a new SNES core in the future will support save states 🤷♂️
For the price, I wanted something more streamlined. This feels like an expensive ambernic or whatever those junky things are called. Clunky UI. Not worth the money when you can get the same thing with a Miyoo mini for $60.
So many options ! I'm going to have to watch that again to help me remember them all. Luckily I'm playing a Game Boy game at the moment so the Sleep Wake works - also there's an in game password system to take me back to the level I was on.
Yes I was thinking the exact same thing, loving the Sleep Wake feature! Haven’t even needed to use the password system.
Please please reply if you have any suggestions what to do!!!
I was playing pokemon leaf green on gba core and I've had plenty of success using save states and suddenly I'm getting failed saves and failed loads on that game! I tried factory resetting with SD card out. I tried going in a different game saving a state and loading it successfully. Going back into pokemon. No success. This is the first time dealing with this and I've put a good time into my mons :(
Loved the analogue pocket videos!
Thanks Kieran! You play many retro games?
@@LovingTechLife Absolutely! Any plans to make more videos looking at retro gaming stuff?
Yeah for sure will be making more retro gaming related videos. Have more ideas than I have time to execute them at the moment! You might have caught a glimpse of my retro gaming setup at the end of my 2023 desk setup video when I show some of the rest of the room with my CRTs?
@@LovingTechLife Just saw that video, I'm very excited to see what kind of retro gaming videos you'll be putting out in the New Year!
@PKThunder__ I’ll see what I can do. :-)
Out of interest how do you play retro? Emulation, original consoles, FPGA?
The transparent smoke version is so dope I ordered one, even though I have the original black version already.
Hey Archetype 1987! They are very cool, love mine 😎
You already see my unboxing video?
Hey! Im aiming to use the save states as a backup for when the cartridge battery runs dry. Do you know if could be possible to extract the save state from the sd, save it to the cloud for future use?
Hey @@jarc127 ! Yes you could do this. When you create a save state it also writes the actual save file too as .sav as well as the save state so you could back that up. Just be careful with Pokémon games they don’t play nice with save states in my experience.
I just received my analogue pocket today Oct 8 2024. I'm playing Mario kart super circuit Nintendo advance game. When I hit the center button to save the game the memory is grayed out, so how do I save my games? Do I need to put a micro memory card in?
Yes I highly recommend you get a card and update the software too, you will be able to save to the card as well.
@@LovingTechLife so I will need a memory card to save my cartridge games? And it'll save to the memory card instead of the cartridge?
@@28_babyshark if you have an original cart with saves then the cart should save.
great video.! Will the save state be better on version 2.1 for RTC?
Hey @Notarnicola! 2.0 is the next release and there has been talk about it but we won’t know until it actually gets released.
are there some cracks around the screen on the transparent shell after using it for a while?
Hey VectorHunter! Yes I think I have a small one on the bottom left side of the screen. Do you know if people are just sending them back for replacement or if they even have stock?
@@LovingTechLife I think this is due to the lack of gap between the screen and the shell, when you play games, the screen heats up and inflates, so it’s a design issue
I use the save states from my Pokémon crystal in gb studio. Is this different? And will this impact the data being corrupted?
Hey Super Sonic! Are you using the “Game Saves” where you choose form the game menu or are you using the Analogue Pocket save states?
What version of firmware are you using on the Pocket?
@@LovingTechLife hey! I’m using save state feature and game saves and I’m on Firmware 2.0. I press the up button and analogue button to do save state
RTC still doesn’t sync while using save states even on 2.0. The only way I know to mitigate synchronisation problems is via flash carts explained here: github.com/ninbura/pokemon-on-the-analogue-pocket
Unless this is what you are doing I’d be wary of using save states with Pokémon crystal.
@@LovingTechLife is it possible to move saved files from gb studio to the Gbc core?
@cljoe35
GB Studio saves are saved in /GB Studio/Saves/ and are named with the same name as the GB Studio game but with a .sav extension (e.g. Game.pocket gets Game.sav)
Save Games for OpenFPGA cores are in a mirrored folder path based on location of rom files. If say ROM is located at /Assets/gba/common/ the save file would be located at /Saves/gba/common/ with the same name as the rom but the .sav file extension.
Haven’t tried but if you copy from one folder to the other and make sure the file name is the same then there is a good chance it will work.
Let me know how you go.
Do you need SD card for save states?
Hey @@Phantomzilla90 ! Yes you do!
Any idea how to make the GBA core load faster? I’m using spiritualized GBA core through pocket sync and it takes like 4-5 seconds to load into a game since it needs to load the core and the bios.
Hey Clionen! It’s the same for me too. Haven’t tried but you could see if there is a difference on whether the games are zipped or unzipped.🤷♂️
So how do you turn on safe state fresh out of the box?
Hey @@28_babyshark ! Check out this setup video: Unboxing the Analogue Pocket: Your Ultimate 2023 Setup Guide
ruclips.net/video/Kk2FnvfN6lU/видео.html
@@LovingTechLife Thank you. Just to let you know, I already watched this video. Still didn't answer my question, do I need a memory card to save by cartridge games like Mario kart super circuit and ninja turtles fall of the foot clan. Because of right now the memory is grayed out
I'm currently having a dilemma with my save state not playing any sound. Not sure how to fix it at all
Hey @itsmushfiqXD! Interesting, which cores have you found are doing this? Is it every time with every game?
I found in the past I would need to save in game normally and then restart the game to get the sound back. Then future save states from that point may not have the issue.
For some reason I cannot create any save states? Home+up button is not working for me. (I don't even see a message I cannot save)
The 'Memories' section also remains in grey. Can anyone help?
Hey Matthiosy! What version of the firmware are you using?
@@LovingTechLife OS v1.0b (January 30, 2022)
I noticed it's an older version. So I assume I should try updating firmware version ;D I'll try this.
Thanks for your quick response
@BitingLion Yep! 😅
Here’s an instruction vid I did - Unboxing the Analogue Pocket: Your Ultimate 2023 Setup Guide
ruclips.net/video/Kk2FnvfN6lU/видео.html
@@LovingTechLife It works now. Thank you very much!😁
@BitingLion That’s great!
Great - thank you!
Hey Sambonz! You’re welcome, glad it was helpful. What did you play first?
@@LovingTechLife Pokemon Yellow! 😊
😎
How do you delete save states?
I need help i cant even select save states its like shaded gray color and i cant even touch it can someone help me please thank you!!! And when i try to save it to it says save unsupported to on the bottom screen too. Need help!!!
Hey MCVAMP! What version of the firmware are you using?
@@LovingTechLife hello thank you it's the latest firmware on there website as of today and not sure why but the save states work for the cartridge but not for the rom games on the micro sd card.
@MCVAMP666 Which system are you trying save states on?
@@LovingTechLife on all of them that are roms to the micro sd card.
Not all the cores work with save states, I share a lots of the specific cores that will work. Are you trying some that are not in the list? Watch all the video through for help with this if you haven’t already.
I don't understand why the SNES core developers won't do save states. Kind of stupid.
I can’t give you a definite answer but like any core it not likely just because they don’t want to, there are technical challenges and other factors that contribute.
Yeah it is a strange omission. Snes safe states would make the pocket complete in my opinion. It would have all the popular consoles covered and have all my emulation on one device
Hey @orthobro7773 ! Agreed, I think the developer essentially has to design the core with save states in mind from the outset.
Also there is the issue of how much capacity / how many gates the FPGA chip has and if they are all essentially taken up with the snes hardware and special cart chips then there may be no room left in their FPGA for added functionality like save states.
Perhaps a new SNES core in the future will support save states 🤷♂️
@@davew2theoodward You just don't understand the tech or how this works. Just say that instead.
Because it’s huge amount of work akin to redesigning the core basically from the ground up and no one pays him to do this full-time.
For the price, I wanted something more streamlined. This feels like an expensive ambernic or whatever those junky things are called. Clunky UI. Not worth the money when you can get the same thing with a Miyoo mini for $60.