How to make Anti-gravity Structure | science project | Tensegrity structure
HTML-код
- Опубликовано: 10 фев 2023
- Today We will Make an Anti-gravity Structure like Tensegrity structure with popsicle sticks. Tensegrity is a design principle that applies when a discontinuous set of compression elements is opposed and balanced by a continuous tensile force, thereby creating an internal prestress that stabilizes the entire structure. Anyone can make this very Easily for their Science or School Project.
#Creative_fest #Science_Project Хобби
How this "anti gravity" structure works:
So when you look at the strings you see that if one string bends, all other ones get stretched, but due to the tensile resistance they get pulled back, and it gets back to the original positon. If the top tries falling down, the center string gets tensed and that causes it to return back up. If the strings of one or two corners fall, the other corners (and usually the center too) get tensed and pulls it back up. Basically it retains its integrity through it's tensile resistance, thus it's called Tensile-Integrity (Tensegrity) structure.
EN VERDAD TE DIGO.... ENTENDÍA MUCHO MÁS EL FUNCIONAMIENTO DE LOS PALITOS ANTES DE LEER TU EXPLICACIÓN 🤔
@@marceloquintanilla4777 Verás, probablemente sea un error de traducción...
[Traducido en Translate.google.com]
@@marceloquintanilla4777 The top part is "hanging" by the short string, like a chandelier from the ceiling. The strings at the triangle corners keeps the top part from falling over.
That toothpick trick is genius. Thanks.
Это не зубочистки. Это палочки для кушанья мороженного из пластиковых стаканчиков.
I wouldn't use black thread - I'd use clear fishing line. The line would be almost invisible...
Tensegrity, so fascinating, thanks!
hallucinant ce tour de magie.bravo!
人の直感に反する真実の形😊
Thank you. I finally understand it
Que trem mais louco meu... Isso é macumba...👍👍👍🇧🇷
好點子~很奇妙!!謝謝分享!
也謝謝你 😊
wow so nice, it actually helped me with my school project. ty for the vid! :)
You're very welcome!❤️
Cool👍🏻
❤❤❤
You're creation is useful for us..
Thanks a lot 😊❤️
INCRÍVEL 😊
Tiga benang hanya penyeimbang..
Benang yang ditengah, adalah benang yang menahan benang dari seluruhnya..
It's very very good. It's amazing. 😮
Incrível parabens. Grande abraço Brasil
good
J'ai fais le même mais le mien n'est pas aussi équilibré.
Bravo à toi !
Прикольно, нужны только нитки, палочки для мороженого, зубочистки и клей. Не надо на Виагру тратиться
Now show us how you didn't get super glue all over your fingers.
👍✊👏👏👏
La cuerda central es la que soporta la tension y las de las 3 esquinas , puntos de equilibrio
Los puntos de las tres esquina soportan la tención y la del centro es el punto de equilibrio....esto es tecnología a la inversa...
Echt geil!
you have created something special, wonderful and amazing! what a genius how have we never seen or thought of this before.
Thank you! Cheers!😊
OMG!!!! THIS IS NOT THE FIRST TIME THIS WAS DONE. IN FACT IT WAS FIRST DONE DECADES AGO. AND THEN HE THANKS YOU LIKE HE WAS THE INVENTOR INSTEAD OF TELLING YOU THAT.
dude, relax...did you read the description? he never claims to have invented it.@@Tazman333
@creativefest okay, time to let them know that you are NOT the genius that created tensegrity structures to begin with. You're a person who watched a video on them, made one, then completely mislabeled your video with a stupid clickbait title.
No. 1. They didn't identify it. 2. They certainly are not a genius. 3. We HAVE seen these before. Oh yeah.. it is NOT antigravity.
I'm here..... It's created
thanks
I might build furniture with the same design using rope instead.. Interesting.. I have a fully equipped wood shop..
quite a few videos of people making things like coffee tables with them.
@@rodshoafNo, not rope. Use clear strong fishing line. That way, at first glance the two parts will bear no resemblance to each other and appear to be floating free. Use nice wood and finish it nicely and put a piece of glass on top. Make a super little mug table.
Кто не учил физику- весь вес сидящего не распределяется по 3 ножкам а нагружает один единственный трос.
素敵な
Good work bro ❤
thanks😊
It’s called TENSILE-INTEGRITY STRUCTURE or tensegrity and was pioneered by R. Buckminster Fuller over 70 years ago. In spherical form (as opposed to a mast) it’s fondly referred to as a ‘Bucky Ball’ the most well known of which is the Epcot Center in Walt Disney World...
Good job sir ji 👍👍👏👏
😊😊
Why don't you just congratulate the guy for doing a great job...instead of trying to body slam with your 'knowledge'. Are you American?
@@BanterMaestro2-vh5vn That's spot on! Well done mentioning it.
I’d wager more in the main were (are) better familiar with the name Fuller than Ingber. None-the-less thank you for clarifying for the rest of the class. I didn’t say Buckminster Fuller invented TENSILE-INTEGRITY I said he pioneered it. Thomas Edison didn’t invent the light bulb he (and his team of engineers) pioneered that technology. Though Zora Arkus-Duntov is credited as being ‘The Father of the Corvette’ for his contributions to that iconic automobile it was a little known (like Ingber) GM engineer by the mane of Ed Gowacki who did the actual work. Duntov was just a project manager. My father made a small cable tensegrity mast which at 4’ tall stood proudly in the corner of the family living room for years. Your’s truly as a pre-adolescent child broke it much to my father’s chagrin. As far as Epcot not being a ‘Buck-Ball’: Throughout my childhood what I heard from my father who was close personal friends with Fuller and from their mutual associates regarding Epcot’s ‘geodesic dome’ that it was ‘another Bucky-Ball’...
Marvellous illusion! Thank you!❤
Awesome
thanks 😊❤️
I made my table anti-gravity by putting legs on it.
How do you determine the angle and length of the center posts?
Bro, I almost break my head trying to figure this out, I even made a representation in geogebra (LOL). I got the answer: the angle is 60° and the leng is the height of the triangle you made (base or top, both are the same). I tried different angles and lenghts, It may work but the distance between the center posts always gonna be the same.
Eso es la base del motor de los ovnis que la nasa no quieren que la gente se entere...esto podría cambiar al mundo....
A soma vetorial de todas as forças é zero. A soma vetorial de todos os torques é zero. Física dos corpos em equilíbrio estático.
Tension - kam mera naam gravity ka 😂😂😂
Çok güzel
What kind of thread is that
The threads are holding this structure together by opposing forces.
Which glue you are use
super glue. thanks
All your base are belong to us.
棒を集めにガリガリ君を買ってきます。
bello
Разборные леса сделай😅
What glue was used?
Super Glue. thanks
Super
Thanks❤️
3:32
cool
thanks 😊😊😊😊❤️
Just to be accurate, it's a tension-suspension device. If gravity did exist (it does not aside from in science fiction) then you have a much simpler device. It's call a Helium balloon or another is a hot air balloon. Those are both "gravity defying" devices. Gravity is itself a bunch of hot air.
Its not anti-gravity, whole weight of the upper structure rests on the middle string the other 3 strings just stablize the whole structure
it's Spring-mounted table
Bn 😊
Tensegrity isn't anti-gravity. Tensegrity is stabilizing a structure by equalizing the forces. Like the spokes of a wheel which keep the hub in its place.
muy creativo
thanks 😊
No, that is Mathematik und Physik !
Outstanding Bro 💖💖
Many many thanks😊❤️
Welcome from Probashi vai channel
Y como es que se queda flotando
Para que la parte superior caiga, la mitad debe separarse. La cuerda del medio evita que eso suceda.
不思議
Kis kis ne 👆 ye wala khilona bnaya 😂😂😂😂😂😂😂😂
Can we use 3 ice cream stick for making triangle? Please tell
I used larger tongue depressors I bought on Amazon.
@@mikegee729did it worked?
....Learned this decades ago and yes it was cool....THEN!....
According to physics, there's no anti gravity thing here. central thread holds the upper triangle, where bottom triangle act as a base. If we extends central thread, or draw a line along with the central thread, it passes the center of gravity on both triangles. It means if you put it up side down, still work as the same. Other threads helps to balance the top triangle. Its creative, however no anti gravity phenomenon here, according to my knowledge. Cheers!
Центральная нить играет роль точки опоры для верхней конструкции , упасть которой не даёт нить соосная с двумя наклонными палочками ( своеобразный рычаг ). Остальные 2 нити , как Вы правильно заметили , играют роль балансира
GEE, SO STICKS AND STRING CAN'T STOP GRAVITY? Jesus, Chewie, go plug this genius into the Hyperdrive...
They know it is not “anti-gravity”, Captain Obvious. Also, it works through tension (middle string) and compression, so if you are going to use “according to physics” at least get the physics right.
IT IS NOT, I MEAN DEFINITELY NOT A
" ANTI GRAVITY " STRUCTURE😊😊😊AS STRING HOLDS THEM IN PLACE.
REMOVE ONE STRING,. THE WHOLE STRUCTURE WILL FALL DOWN, COLLAPSE😊😊😊😊😊😊😊😊😊😊😊THIS STRUCTURE IS HELD BECAUSE OF THE " MIDDLE STRING "😊😊😊😊
Midel Roop main
No tengo idea como funciona 😅😅
Anti gravity...
The object should either float in air or shoot upwards...
Both by itself... Without any external force
you can't call this "anti gravity"... it works exactly because of gravity
Balancing of inertia
Yes, that is not an anti-gravity structure, only a balanced structure
Guys its not magic its logic😂
thanks 😊
keren .. smart and jenius kontol
This literally
depends on gravity to work . . . Next please
😂
Huh ngibul..
Tell me
"Tensegrity structure from popsicle sticks"... There, I FIXED your poorly/inaccurate click-bait title...ffs
magnet ?
no magnets needed.. the middle string keeps the top from coming down.. the outer strings stabilize it
@@rodshoafYes. And I was thinking what a neat little mug table it would make. Use a nice wood, finish it nicely and use clear, strong fishing line in place of black thread. Put a piece of triangular glass on top...
😅 nahi z z😅ß
z😮❤❤âp
❤️❤️😊😊
Stop annoying music
Stop being an annoying jerk
Why the horrible intrusive music??
😂😂😂is this anti gravity
Wow, this many people can't figure out the load path???? It's too simple.......intelligence is severely lacking here.....
Bhai just tell me tumhara baap Ambani hai ?
There is no such thing as gravity
You fool should use you brain
Hi bro
Hello
@@creativefest I am also a youtuber like you
I am Also a RUclipsr 😎😎😀😀
How do you determine the angle and length of the center posts?
И зачем все это? Время некуда девать?
Its not anti-gravity
Yeah, it works BECAUSE OF gravity
You are joking me🧐
Bro its structure, also metioned on the title
It’s just a name.
"Tensegrity structure from popsicle sticks"... There, I FIXED your poorly/inaccurate click-bait title...ffs
What is an anti gravity according to you that cancels gravity with other forces like tension etc.😂😂 Then take a utensil with water and put a paper boat on water surface now they are also anti gravity gadget according to you 🤪
You have a better idea I guess, what would you like to call this?
I'd like to hear it.
Elections 2024
Мошенник.
useless
Actually not. Make it a little larger, with some strong clear fishing line, finish it nicely and put a piece of glass on top. You'd have a really interesting little side table for a coffee mug or some such.
이게 뭔 반중력 구조냐! 실이 위의 구조물을 매달고 있는 구조로 단지 무게중심 잡힌 구조물일 뿐이다.
That is not an anti-gravity structure, only a balanced structure with threads suspending the structure above.
Oh don't be such a party pooper - it's cool. It's fun!
good