How to Flush a Water Heater the RIGHT WAY - DIY Plumbing
HTML-код
- Опубликовано: 26 сен 2024
- How to Flush a Water Heater the RIGHT WAY - DIY Plumbing - Water Heaters 101
Water heaters need to be flushed regularly in order to keep them working properly. Today I'm taking you out with me to flush a water heater for a customer and I'll show you how to flush a water heater the right way. This is a very easy DIY plumbing project that will save you money and keep your water heater in working order. If you have a new water heater, watch this to learn how to flush your water heater and make it work better for longer.
► How to Flush a Tankless Water Heater - • How To Flush A Tankles...
► Click Here To Subscribe - goo.gl/va1xXe
► Check Out My Merch! - teespring.com/...
► My Free Mini-Course to Help You Begin Your Plumbing Career - bit.ly/rogersfr...
► My Networking Secrets That Grew My Plumbing Business FAST - bit.ly/rogersfr...
► My Recommended Plumbing Study Guide - amzn.to/2RgYEn5
► Find Your Local Union - bit.ly/findyour...
Thanks for watching! I'm Roger Wakefield, LEED AP, The Expert Plumber and welcome to my channel. On this channel, I teach homeowners how to save money on their plumbing by doing DIY plumbing projects. I also teach plumbers and plumbing company owners how to be the best plumbers in their area and run successful plumbing businesses. My goal is to teach you everything you need to know about plumbing.
► Check Out Our Social Media:
Website - texasgreenplumb...
Blog - texasgreenplumb...
RUclips - goo.gl/va1xXe
Facebook - / theexpertplumber
LinkedIn - / rogerwakefield
Twitter - / _rogerwakefield
Instagram - / _rogerwakefield
► Gear We Use:
Coolest Clock Ever - amzn.to/31CjLkW
Main camera - amzn.to/2RCyj1F
Lens for main and Second cameras - amzn.to/2SM7
Second camera - amzn.to/2SdzfdQ
My microphone - amzn.to/2FEvN8s
XLR Interface - amzn.to/2RDqskj
Wireless Lav Mic - amzn.to/2HenuRp
Tripod to hold our camera - amzn.to/32aI7Dj
Our studio lights - amzn.to/2Zv2R6O
*NOTE: This description contains affiliate links that allow you to find the items mentioned in this video and support the channel at NO COST TO YOU. While this channel may earn minimal sums when the viewer uses the links, the viewer is in NO WAY obligated to use these links. Thank you for your support!
One thing you should probably think about after flushing a water heater is that it’s good idea to open a Hot side on a faucet and maybe remove the aerator and flushing the lines in the home. I flush heaters all the time and the worst thing that happens is you break up all that scale and blow it through the plumbing system. If your not careful you can plug up cartridges and or areators .
Thanks for your videos. Keep up the good work
Noob here. Once I remove the aerator, would I need a pump to blow the water through the hot water heater, it would I just need to turn the hot water valve on?
@@christiandj50 Just open the hot water side of the bath tub - no pump needed. In the scerino he's showing (NOT turning off the water at the meter), there will be anywhere from 15 to 40 lbs of water pressure (in my area) coming from the street / thru the water lines / thru the water heater / thru the hot water faucet
Sir, wanted to give a big Texas thank for taking the time to making this plumbing videos. It helped me understand much better on how to maintain my water heater. God bless you sir.
Hi Roger. I am a plumber in New York and this is the first plumbing tutorial on youtube i have learned something from. Good Job. Love your videos!
Have always pretty much flushed my water heater as you describe every year, but not with a filter/bucket. Let me also mention that I have whole house filters (2 in series) and a water softener. After flushing for 10-15 minutes with the cold water supply on, most of the large sediment was gone, but there were some fine particles still coming out. However, today, after reading some other posts on this, I decided to just drain my water heater (opened the pressure relief valve to prevent a vacuum) after shutting off the cold water supply. I let it drain most of the way, closed the PRV/PSV, then turned the cold water supply back on. Surprisingly, a whole bunch more of larger white and brown 'rocks' came out again, which I did not expect. Apparently, the turbulence kicked up a bunch more sediment that had been missed in the initial two flushes. Might be worthwhile to flush in two steps - one with the cold water supply on and then again by draining the tank and then turning the cold water supply back on.
This is a great idea, I just had to do the exact same with mine
Did turn the heater off ? You don't say.
Absolutely!@@anotherdamnyankee3805
@@anotherdamnyankee3805 switch it to Pilot or Vacation mode, not Off.
don't mess with the pressure relief valve. open a faucet on hot to prevent a vacuum. opening the relief valve makes it more prone to leaking later. it's like a fuse, it should only be used in the event of an emergency.
Hey Roger, try opening and closing the water supply to the tank a few times while having the hose hooked up just like you did. I found it to be effective in agitating the sediment. ,:)
Thanks Roger. Just went through your steps with my water heater and got rid of 2 cups of sediments with no fuss. I've been putting it off for 3 years since draining the tank with cold inlet shut off just made so little sense, and that's all I was getting from web searches. Much appreciated!
Mine was never flushed in the 5 years Ive had it. Last week I put a hose on it and flushed it out. The water came out thick black with chunks. I let it run for 45 minutes lol.
I see your 5 years and raise you to 10. I'm kinda scared to see lol
@@williamwiese9963 Mine beats all....... it's a millennial, no joke pushing a quarter of a century.
I think it might start off with a few pounds of dust considering the 30 year old pressure tank was full of rust and sprung a leak at midnight a few weeks ago.
AND the pilot keeps going out on the furnace that was already old when it was converted from an oil burner to a gas burner 50-60 years ago...
RUSTIC..........
My heater is from the 80’s and I highly doubt the previous owners ever flushed it. I’m about to attempt it 😂
@@AliHasSpoken I got a reply on a different comment of mine saying if it ain't broke, don't break it.
If you try, good luck.
Anytime I have DIY plumbing questions I refer to RUclips first because I'm always on a budget. And of course anytime I see your contributions I absolutely must watch them. You, sir, are indeed an expert! And your badass mustache only adds to your credibility. Haha
In Phoenix, and Bullhead City, AZ you should flush your water heater, regardless if it is a tank, or tankless, once a year. The water there has so mush sediment in it, that I've seen tanks blow out after three years of not being cleaned. Even with the salt or RO systems, the tanks can hold sediment in the bottom, and those tanks need, I stress need to be done no less than 2 years. I used to be a Realtor in AZ, and was also a property manager, and now do flips in those areas so I have seen a lot of this first hand. It is such a simple thing to do, I'm surprised at how many people never flush their tanks, and then wonder why their systems perform like they do.
We didn't know this has to be done. Thank you!
This! I watched a few of these but this one was most specific and gave the t-shirt idea, into bucket. I didn't expect to see much in newer Bradford water heater and if I just let drain, it looked pretty good. Putting it through a green t-shirt revealed my hard San Diego water residue. I did it in phases of filling up the bucket instead of one shot, to allow inlet water to come in and swirl around (and no holes in buck, and heater was deep in garage, so this was very clean.
You deserve more likes. Thank you sir. I am rebuilding a double wide mobile home. One of my last tasks was a whole house filter. We have well water but it has rust and was fixin to ruin our beautiful brand new tubs, sinks, terlets, etc.
Well sir, we have run a couple weeks without filter before I installed it.
Needless to say (in hindsight) the water heater was still full of crud. So I ran all the faucets for wafts seemed like 30 minutes. Very small improvement.
So I thought…let me see what RUclips sez. Can I open the drain valve and run it while pressurized. I thought so…and YOU SIR confirmed it! 😊
I ran several hundred gallons through the water heater and it is crystal clear. I even closed and opened the drain valve several times while flushing it.
Very RARELY will I give this much of a reply. But here ya go… you deserve many more likes!
Thanks from Suwannee Homestead! 🎉 2:11
Well you sure sound like a pro at flushing a water heater! That is awesome! So glad it worked out for you
You just saved me hundreds of dollars & a lot of frustration, thanks a ton!
Hi Roger, I just saw your video and I’m gonna flush my water heater tomorrow and just connect the hose and turn it on and flush it and that’s it. I thank you for your advice.
I start working for my brother in laws plumbing company here in Tennessee this August. Once I know enough I’ll definitely look into installing a filter.
I like this guy's, he's like the uncle that I never knew I wanted.
I'm the fun uncle
On YT search for a completely different subject, but saw your thumbnail pop up and had to click lol Great video!
Sometimes you will get a weird blue jelly. A couple times the sediment was so bad on a water heater that I've drained the entire heater, removed the brass drain, and vacummed out the bottom of the heater with a shop vac and a rubber hose.
Really appreciate your videos. I have a question. If there are large amounts of sediment that do not break up, is there anything that can be added to the tank to break down that sediment so you can get a better flush of the tank?
nothing added, but you can try sticking a clothes hanger or a rod into the flush valve to try and break up that sediment
Very helpful. Got a roughly, probably older, 41 year old Kenmore (guessing based on searching the model number). I knew I had to flush it 'cause I had to shut my gas off and upon turnining it back on the hot water was more like black water.
Question, do you need to shut the power off first? I’m assuming the cold water coming into the tank and the water leaving via the hose is the same. If the hose is letting more water out than is coming in and the tank level drops below the upper heating element wouldn’t you risk burning out the element..
Yes. To avoid dry firing the heating elements, turn off the power to the tank many minutes before you start draining. Then, don't turn it back on until the tank is filled again. And to get it filled all the way, you should open a faucet somewhere to let the air out of the top of the tank. (I've watched a few of these videos).
I've been told before to open hot faucets and drain the tank down. Question 1: Is that necessary? So, you just put the drain hose on, open the valve, and let the cold water pressure flush it? Question 2: what if sediment plugs the drain spigot? Can you put a screwdriver in there to try and break it up? Q3: Should you turn the gas off before you drain it?
Ooooo mine hasn’t ever been flushed. Wonder what’s in it. Haha
When it's time to replace your water heater let's cut open the old one and see!
Roger Wakefield I am allllll for that! Woo! Yeah! 💪
I’ve never done mine either yikes 😳
Should you turn off the power on the heater?
@@srichard217 I'd say you should turn off the heat or you'd be running hot water over your hose and may scald yourself.
I had a brass valve on mine, but the opening was not very large. I am surprised that you dont recommend switching the valve with a ball valve. MUCH larger opening, and I had found that more sediment was flushed due to the higher volume through the unrestricted orifice.
I did that and was pissed the brand new ball valve leaked. but the gate valve that came on the heater was too dang small and plugged up
I duck tape an old sock to the end of the hose, it lets trap and see all the sediment/debris from my H2o tank. Awesome video sir!
I just replaced my 20-year old Maytag electric water heater this week after it started leaking internally and shorting out the thermostat, leaving us with scalding hot water. I replaced it with an A.O. Smith 100 model,....it came with a plastic drain faucet at the bottom, however, it is a few inches higher than my old Maytag outlet. This allows me to connect a drain hose without interference from the sidewall of the drain pan. I hope to get at least 15-years out of the new water heater.
Thank you for the help! You are a great speaker!
Happy to help!
@FaithfulComet neither…
That method you showed will work fine, if home owners flush their tanks at least every two years. If a tank has not been flushed in ten years, the flush method needs to be different.
Step 1- shut off the power.
Step 2- drain the tank
Step 3- remove anode rod
Step 4- use a spray nozzle on a water hose to spray water through Anode rod opening. Move spray around. I have gotten a bucket full of sand-like sediment out of tanks using this method, when simply draining the tanks produced only a quart or two of sediment.
Step 5- install new Anode rod. Close drain valve.
Step 6- fill tank and run water in House until all air is out of the system.
Step 7- turn power back on.
I get eighteen to twenty years minimum service from from my hot water tanks. I currently have four hot water tanks.
AO Smith - 18 years so far and still going.
Bradford-White 19 years so far and still going
Whirlpool- 19 years and started leaking. I never drained it. It was at our cabin. AO Smith refunded my total purchase price plus tax paid. It had a lifetime warranty. The tank was built by AO Smith for Whirlpool. I replaced it with an AO Smith tank.
You can replace the anode rod, both electric elements, and both thermostats in an electric water heater for less than $80.00 in parts, if you do it yourself. I had to do that at year 16 on one of my AO Smith tanks.
This stuff is not rocket science.
Just recently replaced my 32 year old 80 gallon water heater and it was about 3/4 full of lime and rust
I let the system pull a vacuum on itself then turn the water supply back on to give me a good surge. I’ll let it run for 30 seconds to a minute. I’ll do this about 5 times. I flush every 2 to 3 years and replace the anode rod every 5 or 6. I put a camera in the tank when I change the rod.
So just flushed the water heater. The water clear after 20 minutes, all good! Then I shut off the drain valve and disconnected the hose. The valve did not completely shut off. So now I have a leaking drain valve. Awesome!! Guess I’m gonna learn to replace the drain valve. So I assume I’ll need to shut everything down, drain and repair. My shower pressure is still bad after flush. Again, Awesome!!!
I'm in the same position
Thanks for the video Roger. I'm going to flush mine for the first time. I moved into this home two years ago and I don't know if the water heater has ever been flushed. It might be pretty nasty.
I finally replaced my plastic spigot with a metal one after 10 years. I just take a pail and open it up until it runs clean once or twice a year. My last water heater the rod never wore out and never needed replacement in the heater lasted over 30 years doing this. I set to 125degrees at kitchen sink as the gas unit at the tank will kill germs 132 at tank and less than 135 to scale tank. If I had hammer arrestors on my washing machine (easy to install and helps whole house) my first water heater would probably made it longer.
Depending on how old water heater is when Flushing it would be a good idea to replace the anode rod if possible to extend the life of water heater
Fantastic video. It makes so much sense to let the water pressure flush out the sediment but at what stage would you open the hot water taps in the house and isolate the cold water supply to the tank to basically drain it fully (dead volume still left in the tank)? If I got this correctly you said 10-15 min. Also, I have a HTP tank with a relief valve. When should it be opened during the flushing process?
Thank you
I’m gonna flush mine when I get home. It’s been in the house for 6 years before I bought it. Probably never been flushed out. Supplied by well water without a filtration system. This outta be fun!
Good luck!
Thank you so much for this video! I am in the process of flushing a leaking water heater right now, and I was surprised I wasn't seeing a lot of water come out the opposite end. I kept screwing more thinking that it was a screw that should come loose, then when I noticed it wasn't I thought it should be inline with the hose. Checked this video to confirm. Unfortunately the water must have leaked out already, the water was pretty soaked on the floor coming back from a vacation so pretty sure there wasn't much remaining to drain =(
I had a bunch of soft white/clear chunks in my water heater when I flushed it last year.
I have a recirculating pump at the top of the water heater to send water to the far side of the house. I forgot to turn the pump off and it wasn't working following my flush. I didn't do it your way, but turned off the water supply and completely drained the heater. Luckily, the recirculating pump worked the following day.
My wife has lived in our current house since 2008. Never been flushed. 15 minutes in and I’m still getting bursts of yellow orange colored water. Letting the water fill up and get warm again and I’ll continue to flush
Thank you for the video Roger. Water coming out of my hot faucets is slightly brown and clear out of the cold water faucets so I read that it could be from rust in my hot water heater. I will flush it tomorrow and see what happens.
Great video. I live in the south where we are approaching stage 4 water restrictions. Could plz do videos where you repurpose the water. You can put that bucket over your grass or is that a bad idea? Thank You .
In Colorado we are on water restrictions so maybe flush out over grass…use water fir something
Thank you so much for sharing your knowledge about this important home maintenance project. God Bless you.
Some guy is paying me to do this and I’m watching your video 😂😂🤷🏻♂️ Don’t hate the player , hate the game
Where's my check?
For gas water heaters do you need to turn the gas off when draining and flushing?
Can you use citric acid to clean the system before a flush?
My local plumbing store told me to pour in a cup of bleach and let it sit overnight. And my engineer friend said at the university they Did the same thing for a water system that is sat for a long time and had bacteria in it. Filled the water system with bleach. Just be sure to flush it out. Good before you use the water again.
Did you ever make the video on the Flush with a flite system? If so, I can't seem to find the video on your channel.
My parents 5 year old water heater sounds like someone is tossing rocks inside it lol....we live in a neighborhood that has the worst calcium deposits ever...everything turns white powder if water is left to dry. I wish i had seen this or known this 4 years ago it desperately needs cleaned. I sent Roger a FB message and within a couple days they responded. If i do clean it it may cause fractures since its never been cleaned sooo im kinda worried. But i cant leave it like this. Thank you for the response Roger great vids.
I have an electric water heater and hard water...
I usually drain the heater and change the elements every 6 months.
I also have to use a vac to get out all the calcium because it will not come through the drain.
Get a descaler. Wraps the incoming water line. $200. Really helps. I have on both my houses.
Are usually do mine every few months. I live in an area with very high dissolvable solids. We’re like it 150 or 200 ppm which is really high so that builds up. The water quality out here also sucks. It will go stagnant or sour in a few days. And this is treated city water.
Nice
You let the heat on and valves open while flushing?I flushed my water heater after 6 years I got half a bucket of calcium cant remember but it was filthy few calls still works!
What about turning your burner valve to vacation or pilot ? Isn’t this the very first step to be done ?
Is it really safe to do this without turning off the cold water supply valve?
With THIS particular method the cold water supply MUST be kept on since your BURNER remains on. If you were to shut off the cold water supply with the burner still on while draining out the water in your tank, the tank will subsequently heat up and its lining will quickly be destroyed rendering your water heater useless.😮💨😮💨😮💨
Thank you, Roger! You are the best!
Actually it’s best to sell a short brass nipple and a threaded full port ball valve with garden hose thread adapter when you sell the water heater. The brass drains that come on water Heaters are way to small to flush adequately. They have an opening about the size of a pencil. Also the dip tunes in Bradford White and most other brands are designed to swirl the incoming water to stir up the sediment so it all does not flush out like you may think. Flushing with pressure then draining completely with no pressure gets a lot more out.
Thanks for helping me understand the last part. I have a HTP tank and the manufacturer makes a reference to this. Do you know at what stage the relief valve should be flipped open during the flushing process? I'm presuming only after the tank is isolated and being drained.
What do you mean by "sell"
@@debbiedebbie9473 I was speaking from a plumbers perspective. Typically you purchase a water heater and install from a service plumber/ company. The plumber should offer the better drain than what comes originally so the customer/ home owner can fully flush the heater.
@RogerWakefield thank you for an awesome video sir. I flushed my water heater today. Maybe you can help with a couple questions though.. firstly, while draining my heater it seemed to glug glug glug along the whole way slowly despite having faucets open, unless I opened the pressure vent, it took forever. Second and more importantly, my gas water heater seems to only put out lukewarm water now. It used to get scalding, and now it doesn’t, weird. Any ideas? It’s a 4 year old gas Rheem 40 gal water heater and has never been flushed till yesterday. Hope you can help. I’m a first time homeowner in the Texas panhandle and your videos have been a God send.
Hose hooked up, drained the water heater, turned on cold, flushed it multiple times, closed the valve, when up to turn the hot water off and it was super hot, like it never drained
Do I need to shut off the power to the water heater to do this method?
I’ve had my water heater for 10 years and nobody’s ever told me to flush my water heater. I didn’t know that was a thing.
Now that I came across this video, I am going to flush all that settlement that you said that coats the inside of the water heater, hopefully get them walls and the bottom cleaned after never flushing it before, is there a trick to cleaning that stuff you can’t see?
Ty
uggg i never get around to flushing my water heater... guess ill should do it this week
If it makes you feel any better, we never flushed ours in 20 years of its life and we had hard water. We replaced it when it was still working but making lots of noise.
Wish me luck Roger. I have to do this for the first time by my self.
How was it?
@@Aagggyy pretty easy to be honest. However all the build up made my water rust colored for a day. I watched this a few times before attempting.
I have an 50 gallon natural gas AO Smith power vent that had the anode rode disintegrate 3 years into its life. Cottage cheese like sediment was plugging up fixtures. Had to drain, flush and install a powered anode rode system. Problem solved.
Was this from too soft water eating the magnesium anode rod, up here in western PA?
Wait so you dont turn off any valves then just start draining it for 10 to 15 mins?
No reason to shut anything off. You're really just pushing water through the tank directly, not much different than turning on a faucet.
You should pick up a hose bib cap before doing this. Unless your water heater has a ball valve like this one, I guarantee it will leak after. You'll use the cap to stop the leaks.
If your valve leaks at the handle after, and that is common, you can try adjusting the nut or just replace the valve.
Should you flush the heater out with vinegar to remove the calcium.
Just flushed mine. Some black sediment but mostly small calcium particulate. It's been at least 5 years since mine was last done....I know I am a professional homeowner failure lol. I honestly expect there's a decent amount that didn't come out of mine since I waited so long and we have very hard water here.
Is it really just as easy as hooking a hose up and turning the PRV? I need to do this like yesterday...my water heating has started popping pretty loud over the past few weeks. I just wasn't sure if I needed to turn other valves on /off on the water heater...?
It’s that easy
Do you turn off the heat before you begin thr drain process?
I was wondering the same thing about turning off the gas
@@chrishoel6954 I don't think his method requires you to turn off heat because its constantly being filled with water as its draining.
Why would you need a replacement valve anyway? What hoses do you need? I feel like some steps were missed here 😂
Are you using a special hose, or can a regular garden hose handle the hot water coming out?
a regular garden hose will work
Thank you very much very helpful
Thank you for posting this helpful video!
Pipes burst this weekend... TL:DR I had to cap off water from everything but cold for 1 sink and toilet cause my aunt's husband did us a favor 15 years ago...
Every time I take something down to find the leak I'm shocked plumbing this bad didn't break the laws of physics and burst into flames.
Advice... Never try to be nice and help fix something if you dont know excactly what you're doing... and if you do have a friend helping you watch youtube tutorials behind him/her while they work :D
Time to go drain my water heater cause a CPVC fitting was used to replace the valve between the main shutoff and the outdoor tap... leading to a slow leak under the bathtub... that rotted out the beam under my water heater.
Thank RUclips I watch these videos all the time. Only thing I wont mess with is high voltage and sewage.
Would you recommend using a wet shop vac so pull water out faster and perhaps pull more sediment out as well?
While replacing the lower heating element on an electric water heater, we used a shop vac and duct taped piece of rubber hose that fit inside the water. Here opening pull out gallon or more of mineral deposits!
My problem with leaving the pressure on is my fill port is the same as the drain. I have flushed mine about 6 times. Clear water but still have flakes that plug up the kitchen sink sometimes in the matter of a few minutes. I don't know how it's designed but I'm definitely not getting it all out.
Hello guys I want to share something with you guys ..Iv been Plumbing for 14years and never encounter what I did today. I had a call for a shower stoppage , so i got my machine out and starting running the shower to get it to backup which it never did... so I still ran my snake down the drain... went in like 20ft in, so I started bringing the snake in... what I pull out was crazy. I pulled back a small (mause/rat)it was Dismember but can see tail,leg,feet and What appears to be its ribs cage...
I have a picture
The valve shut off at the top of my water heater is seized. Would I be able to use my main water shut off valve instead?
Yes
Hey Roger---good video...but why didn't you shut off the breakers that supply electricity to the calrods?????
Use a old sock and tie wrap it to the drain hose.
My tank was only 1 1/2 yrs old, bottom element went out. When I replaced it, I did a flush....over 2 gals of sediment and mineral deposits. It's all due to very hard well water, i will be flushing more often.
Is that brass valve water heater specific? I need to change out my plastic one to a metal one
That scares me... We have some of the hardest water in the country here and it's been like 4 years atleast since it was installed and has never been flushed....
@@Zalagar619 My is 13 years old and NEVER flushed. It still seems to work fine but we hear the rumbling sound whenever we first turn on any hotwater in house. I'm pretty sure it would be a very bad idea to try and flush it now according to this video. My fear would be that I would open the drain valve and never be able to close it due to hard sediment getting stuck in the drain valve
I recommend getting a 2-3" x 3/4" Brass Nipple and a 3/4" Full Port Threaded Ball Valve then a 3/4" male pipe threaded x Hose Bib thread brass Adapter
Moved into a new build in Killeen 2 years ago to the day. Drained it last year, about to do it again at the end of this year. When I did it last year, a bunch of snot looking clearish marbles came out, like it was soaked wet silicone beads or something. Any idea what that is? Also had the usual yellowish chunks of calcium as well, but there was more of that snot than anything else.
Yeah, my water heater just did something like that tonight (it's why I'm watching this video I suppose) Not as bad as what you had but it had all that and it was naaaaaasty!
Two days ago I flushed my hot water heater and I had to completely remove the valve because the white chunks were too big to come through I had to shove a screwdriver in there to let the water out
I just learned today that water tanks have to be flushed out. I live in an apartment all my life and no one told us to flush out the tank. It's been way over 5 years and never flushed out our tank. 😬
Great Video, Roger.
Glad you enjoyed it
dude, this video was awesome! you're a great host
I appreciate that!
Great video. Thanks.
Hi Roger, So.. Should the hot water outlet valve be turned off while the cold water inlet valve stays on while it's being flushed?
Then allow it to refill and slowly open hot water outlet valve? I do maintenance in an apartment building. We have three hot water heaters that are in rotation. Two are kept on while one is off. (Please, Anyone can comment to help me). We have some complaints of brown hot water in showers and bath sinks. NO Filtration or water softeners installed. Built in 2004. Thanks.
Thank you for the video, do I need to cut off the water heater so it doesn't keep heating while I do the flush?
i get little white grains/chunks. perform flush every year. after emptying tank, i pour in 3 gallons of white vinegar through anode mounting port, let sit for hours to dissolve scale, then turn on supply and heater. the vinegar odor quickly dissipates and might even clean shower heads and faucets.
I do the same, but only every 4 years when replacing the anode. Other years, just flush with water. I flush the vinegar out the drain, rather than through the house plumbing.
Roger my hot water heater is a gas power vent/flue style with a 12 year warranty. It’s about seven years old and has never been flushed. I was thinking of flushing and replacing the anode rod. Do you think it would be worthwhile to do so on a hot water heater that is 7 years old or am I asking for trouble??? Thanks for your time and for all the great videos! I always learn something!
Ron
My random brain.
"What if I hooked up the hot water to the toilet."
No more clogs. But splashes would burn
Good idea with that trap.
Great video. Very helpful
Only time I do this if we re pipe and customer previously had galvanized lines.
Thanks for sharing!
Thanks for watching!
I do it this way too. Leave pressure to blow most if not all that white and brown chunk sediments. I do that once a year and drain about a couple of gallons out. I also have a water softener. Hope what I'm doing is right. If not please let me know... thx
Do you need to turn off the water supply ?
I know this is an old video but I hope someone sees this. Our hot water heater has stopped heating very well, even though it's only 2 years old, after a main line in our neighborhood burst. Our water was brown for 3-4 days. I'm thinking I need to flush the tank.
100% easy fix. Move
@@Herbie11 genius! Why didn't think of that?
@@MSANTHR0P3
😉
Sounds like a great idea. I would try that! Did it solve your problem?
Random question I live in Texas I have gas water heater in attic can I just install a ball valve and terminate it into the tpr line instead of having to deal with long hose?