making a offset satellite dish .Flat offset satellite dish.How to make a satellite dish.
HTML-код
- Опубликовано: 14 окт 2024
- #satellitedish #offsetsatellitedish #Hashemi#solardish #flatdish #fixedfocus
In this video, the construction of a unique satellite dish is discussed
This satellite dish is flat and has the ability to be converted into a solar dish
For its industrial production, a metal sheet can be created in the form of a press in the form of an indentation on the surface of a plate.
Express your opinion in the comment.
The address of the video related to the construction of the satellite dish
• making a satellite dis...
واقعا درجه یک. البته صبرتونم قابل تحسین بود.
ممنونم دوست عزیز
Perfect, But signal level indicator (beep) doesn't proof dish ability to intensify microwave into LNB in right manner. Probably phase difference is more than acceptable values for DVB-S1 and S2 phase modulation error. Your method works for solar concentration, because the phase difference is not an important issue for heat generation. Offset dishes utilizes a part of a parabolic curve that is not at the origin of coordinate system.
I have no idea about satellite dishes, but this would be indeed an amazing solar concentrator. This contraption could be made in several parts, or a whole piece. Just for convenience. With a black pipe running right through the middle, or several high-concentration, water-cooled solar panels.
An interesting part of this design, is that you can keep everything extremely level (provided you level your table and the laser can dangle straight down from a rope). This means that you will have a much easier time using a very simple "tracking system." The one that is like a very long + and 4 light-sensor on each end. Provided you make them perfectly square, which shouldn't be hard with this flat system.
Of course you can use bigger mirrors, for the convenience, and have some kind of protection around this whole contraption.
Aluminum mirrors will probably be the best, and more affordable.
that is using your brain, you have my respect and admiration, greetings from Mexico
I thank you
Waoo. Amazing. My mouth lefted open after seeing. I am really impressed by your work Sir.
This dish is stronger than oval dishes. Can you make a comparison of the strength of signal reception? Thank you for this wonderful effort.
Thank you for your comment
This satellite dish is for special purposes and the more surface it has, the greater the power of signal concentration
This is a great idea you have a great channel !
Thank you so much!
یک ایرنی اصیل شمایید اهسنت 👍👍👍👍
از لطف شما سپاسگذارم
@@fixedfocussolar 🌹🌹🌹🌹🌹♥️ درود استاد
good channel never stop please
Eline sağlık. Bir sorum olucaktı peki bu sistemi teneke cocacola veya fanta veya başka bir kutu alimünyum arka kısmıyla yapmak mümkünmü alt tarafı zaten canak antene benziyor. Bu teneke koladan kaçtane kulanmak lazım hesap yapabilirmisin beya bize bunun yaracağı bir video yapabilirmisin. Şimdiden teşekürler.
Merhaba
Ne yazık ki bunu yapma imkanım yok ama yansıma oluşturan herhangi bir metali kullanıp dikkatlice ekrana yapıştırabilirsiniz.
İyi şanlar
@@fixedfocussolar Hangi metali önerirsiniz
thank you ,and god bless you.
thank you teacher.
You are welcome
This is a great idea for sunlight since sunlight is not coherent, but I don't understand how it can work for satellite signals. RF is coherent and needs all of the resulting wavelets from each little reflector to reach the LNB in phase. With this flat dish, however, each circular ring of reflectors would have a different path length, and therefore a different phase. They need to be in phase to add to each other. The only rings that would be close to be in phase are the ones that are approximately one wavelength apart (176 cm at 1700 MHz). I just don't understand how it works for RF. What am I missing?
It is absolutely true that it does not matter if the sunlight is in phase
But this is not the case for RF waves
In fact, waves that are in phase and in line cause amplification in the receiver
And it is possible that it is created from all the mirrors or a part of them
And this should be obtained by various experiments, how much loss and non-correlated reflection we have
Thank you for your good comment
Salam Im new in ur channel
Raheem from Pakistan
مهندس جان وقت بخیر من فیلمهای قبلی شما رو دیدم 12:24 12:26 12:27 12:27 🎉اگه بشه من زبان نمیدونم زبان فارسی باشه امیر از اذربایجان ایران مرسی
امیر جان سلام
با عرض پوزش امکان اینکه به زبان فارسی باشه امکان پذیر نیست ولی شما می توانیذ با لب تاب یا کامپیوتر ویدیو ها را تما شا کنید و در قسمت تنظیمات زیر نویس فارسی را انتخاب کنید تا برای شما به زبان فارسی ترجمه شود
با احترام
جالب بود . نسخه اصلی و زبان فارسی رو کجا میتونم ببینم؟
متاسفانه این کانال فقط به زبان انگلیسی می باشد و شاید در آینده کانال فارسی نیز راه اندازی کنم
@@fixedfocussolar دوست گرامی این محتوا به زبان فارسی هست و به صورت ویس اور ترجمه شده . اصل ویدیوها بدون ترجمه آیا در کانال تلگرام یا ... هست؟
Nice
درود استاد گرامی یه سوال با این دیش میشه جهت هاتبرد رو فول گرفت؟
من با دیش ۱۳۰ گرد تونستم بگیرم به نطر شما با این میشه گرفت؟
دوست عزیز این دیش تخت نسبت به دیش آقست معمولی ضعیف تر عمل میکنه چون برای ال ان بی باید امواج هم فاز و همسو ایجاد شود و برای ساخت آن باید دقت زیاد و سطح دیش بزرگتر باشد
موفق باشید
👍🏻
درود مهندس خسته نباشین
باید حتما ورقه ها از جنس استیل باشه؟ یا با همین ورق های فلزی 1 میل یا بیشتر هم میشه درست کرد؟
ممنون میشم
درود بر شما
انتخاب استیل به خاطر تنظیم انعکاس با لیزر هست و درحقیقت هیچ فرقی با ورق آهنی ندارد
@@fixedfocussolar ممنون مهندس 🌹🙏🏻
خواهش میکنم موفق باشید @@avatar3396
Suppor man❤
thank you
q1 what is the measurement of the base board? q2 what is distance between curse line n q3 what is radius the last outer distance?
Thank you for your comment
It should be said that the area of the board depends on the received power of the signal you want, and the larger the area, the more power will be concentrated in the focus and the signals will be stronger.
Also, the focal length depends on the area of the board you are using
Good luck
Which degree you try sir
I did not understand you
درود. جناب مهندس بنده ورقه های استیل که داشتم اجبارا ،مربع به سایز متفاوت برش زدم مثلا یه تعداد ۳×۳ دارم و و تعدادی۴×۴ حالا میخواستم بپرسم الزاما باید حتما هم اندازه باشن؟در انعکاس دقیق امواج به سمت lnb دقیق عمل میکند؟ ممنون میشم راهنمایی بفرمایید. سپاسکذارمیشم
درود به شما
مشکلی ایجاد نمی کنه ولی هرچه ابعاد ورق کوچکتر باشه دقت بیشتر خواهد بود
و باید سعی کنید که ورق های استفاده شده روی هم سایه ایجاد نکنن
ضمنا سطح دیش را بزرگ بگیرید تا امواج تابیده شده به ال ان بی قوی تر باشه
موفق باشید
@@fixedfocussolar درود جناب مهندس. سپاسگذارم از راهنمایی و پاسخ جنابعالی . موفق و پیروز باشید
A mój dziadek wynalazł rower... na strychu... 🤣
Facet pokazuje to co już jest wymyślone przez kogoś innego.
Drogi przyjacielu, to nie jest wynalazek
لطفا اگر زحمتی نیست آقای مهندس به صورت فارسی توزیح بدید که ماهم متوجه بشیم
متاسفانه این کانال به صورت انگلیسی ارائه میشود و شما میتوانید متن زیر نویس آن را در قسمت
تنظیمات یوتیوب به فارسی مشاهده کنید امیدوارم در آینده کانال فارسی را راه اندازی کنم
با تشکر از کامنت شما
It takes time to be made and efficiency we don't sure how it is ???
Wasting time
Motshkrm agay mohnds
خواهش میکنم
خدایی اینهمه زحمت برای چی؟؟ وقتی خیلی راحتر و با فویل آلومینیوم و طرح مقعر میشه همین ساخت...
قبول کنید زحمت بیجا و زیادی دارد
دوست عزیز این یک دیش تخت است و با سهموی فرق میکنه