Все по классике - угробил пару пассатижей, несколько сверел, и приварил подшипник. Продолжаем изобретать крайне полезное ничего. Руки за такое отрывать надо.
Literally every "trick" was a "ok, but why" The only thing REMOTELY useful in the video was a spray can top, but even that you could've probably just bought the spray can top for like 20¢. Like you have to be real desperate to be like "4úçk, I lost my spray nozzle and I can't buy a nozzle from the store or just buy a new can" Every single other "hack" was just a waste of money. Like that rotating disk thing looked pretty cool gluing all around that dowel. But why couldn't you just walk around the damn thing instead of wasting time, a bearing which is relatively expensive, and all that metal for something you could've just used your damn feet for. Like do people actually think wow. I'm gonna use that trick when my hubby is working on something. Like man. These tricks are absolutely useless.
My brain almost ceased functioning after the first let's go to elaborate means to make a thin set of pliers even though I appear to have a well outfitted workshop so likely have all sorts of different pliers anyway. I honestly don't get the battery one. After huge amounts of effort and interesting engineering you've made an electric match. So it obviously can't be that, so what exactly is its purpose? If it's a battery holder it's mighty permanent, and if it's purpose is to set fire to small bits of paper there are more suitable things available. And cheap too
@@muir8009 I think it's meant to be a fire starter or even worse a foam cutter or something. But again, why waste a piece of metal if you can use aluminum foil or a metalic gum wrapper start a fire. If their using it for cutting foam its beyond our brain comprehension. Like how the hell can you ever use that to cut foam.
Упоровшись всем, чем можно, Саня мощный глюк поймал. Попрощавшись с персоналом Саня швабру оседлал И по длинному коридору Он на выход поскакал. Оказавшись на свободе Он увидел "свой" гараж, Навязав "коня" на входе, Вошёл Саня в сильный раж. Вновь похерел инструменты, Гайки, шайбы и болты, То, что пишем мы комменты Дяде Сане до звезды.
👋!Всем нашим злюкам приветик! ( зайду на канал попозже, когда все соберутся! ) 🚶 Зашёл, почитал, оценил, поставил всем 👍! Александр К. Молодец 👏! Утешил 🤗👍😂🤣😂! Спасибо:) А Злой Сыч где? В рейсе?
Сколько нормального инструмента переломал. Заводы по производству инструмена наверное в шоке от того что планы по производству нового инструмента выросли
Come on now! Most of these "ideas" are completely pointless. I mean who in the hell is going to actually spray paint something with that wooden peg BS? It was just shooting out globs of paint that was running everywhere! Also why would you narrow down a set of pliers to fit through a random slot in a random piece of metal? I could just keep going and going with this bunch of ridiculousness!
Идея с поворотным столом для сварки интересная , но вот исполнение это полный трешь , кто же подшипник приваривает , у него же обойма калёная и смазка внутри , на один раз конечно пойдет , но для постоянного использования , это жопа ! Остальное полный хлам и уродство инструмента ! Закусывайте дяденька !
ENOUGH now, for Christ's sake 🤦♂️🤦♂️🤦♂️
Все по классике - угробил пару пассатижей, несколько сверел, и приварил подшипник. Продолжаем изобретать крайне полезное ничего. Руки за такое отрывать надо.
Еще до дремеля добрался, в цангу всякую хрень запихать и подшипник разбивать)
Тем не менее уже 750к просмотров набрал
Literally every "trick" was a "ok, but why"
The only thing REMOTELY useful in the video was a spray can top, but even that you could've probably just bought the spray can top for like 20¢. Like you have to be real desperate to be like "4úçk, I lost my spray nozzle and I can't buy a nozzle from the store or just buy a new can"
Every single other "hack" was just a waste of money. Like that rotating disk thing looked pretty cool gluing all around that dowel. But why couldn't you just walk around the damn thing instead of wasting time, a bearing which is relatively expensive, and all that metal for something you could've just used your damn feet for.
Like do people actually think wow. I'm gonna use that trick when my hubby is working on something. Like man. These tricks are absolutely useless.
My brain almost ceased functioning after the first let's go to elaborate means to make a thin set of pliers even though I appear to have a well outfitted workshop so likely have all sorts of different pliers anyway.
I honestly don't get the battery one. After huge amounts of effort and interesting engineering you've made an electric match. So it obviously can't be that, so what exactly is its purpose? If it's a battery holder it's mighty permanent, and if it's purpose is to set fire to small bits of paper there are more suitable things available. And cheap too
@@muir8009 I think it's meant to be a fire starter or even worse a foam cutter or something. But again, why waste a piece of metal if you can use aluminum foil or a metalic gum wrapper start a fire. If their using it for cutting foam its beyond our brain comprehension. Like how the hell can you ever use that to cut foam.
The title of this video should be
How to remake tools that already exist in more time than it takes to get a job and buy them.
Наливай.... помянем очередные пассатижи....
Сыч, привет!!!
Главное, что он создал непонятную ситуацию и приварил подшипник! 😃
Упоровшись всем, чем можно,
Саня мощный глюк поймал.
Попрощавшись с персоналом
Саня швабру оседлал
И по длинному коридору
Он на выход поскакал.
Оказавшись на свободе
Он увидел "свой" гараж,
Навязав "коня" на входе,
Вошёл Саня в сильный раж.
Вновь похерел инструменты,
Гайки, шайбы и болты,
То, что пишем мы комменты
Дяде Сане до звезды.
Браво!👏👍😂🤣😂
Месье знает толк в извращениях!😂
Putin idiot
Ну наконец-то подшипник приварил, я уже подумал что Саня исправился😂
Та не. Доктор Дью доказал что Саня никогда не исправится
Саня уничтожает пассатижи быстрее, чем больница их закупает.
Гения уничтожения инструмента и все что с ним связано😂
soon as you don't break the sharp edges it's a huge fail for me, and that's just the beginning of the failures.
Бутират и конопля -
- Санька лучше друзья.
Ну а так же мухоморы,
Чтоб пилять для нас приколы
Саня рад употреблять,
Чтобы всех нас удивлять.
Молодец!👏👍😂
Дядь Саня, плоскогубцы недопилил, можно было 2 шт. сделать.
You ruined those pliers. Not watching the rest. Google "tempering" and "heat treat". Your pliers are now basically playdoh
Well, there’s four minutes and 45 seconds of my life that I’ll never get back
Где же Сыч и его товарищ?
Пассатижи которые плохо себя вели попадают к Сани😂
Главное правило любого диайвайщика - необходимо обязательно испортить годный инструмент....
Thiên tài sáng chế❤
I think he's running out of ideas 😵😵🤦♂️
👋!Всем нашим злюкам приветик! ( зайду на канал попозже, когда все соберутся! ) 🚶 Зашёл, почитал, оценил, поставил всем 👍! Александр К. Молодец 👏! Утешил 🤗👍😂🤣😂! Спасибо:) А Злой Сыч где? В рейсе?
Привет! Спасибо! Возможно, что в рейсе.
Было ,было но это просто шедевр .
Сколько нормального инструмента переломал. Заводы по производству инструмена наверное в шоке от того что планы по производству нового инструмента выросли
Kecerdasan yang luar biasa 👍
Лютый пи...ц. Чем дальше, тем круче бутираты....
How to turn a $50 set of kliens into a $5 needle nose.
Автору наплевать на то, что он делает и изобретает. Ему нужны просмотры
Good vidéo 👍☺️ tanks 😋🤩
🤜🤛
Когда нет мозгов но есть болгарка и сварочник -))
А где изобретения гения? Я вижу только изобретения особо одарённого
😂 дааам а я думал что доктор выбирает самый треш, а оказалось что нет🤣
That's cool 👍
Вместо Mr SunY обкуренный Саня.
More perfectly good tools destroyed 😞. When will it stop??
These fools are idiots. I agree.
А с подшипником от сварки, точно ничего не случится🤔
Vaguely interesting but the soundtrack!!!😱
Это что, пассатижи для труднодоступных мест?!)))
These tools already exist. Just buy them
Интересно. А как этот случай называется в психиатрии? Наверняка Мистер Суни не первый с таким расстройством
не важно что полная хрень .. за то своими руками . пусть и не из плеч
Just.... buy the right tool
Come on now! Most of these "ideas" are completely pointless. I mean who in the hell is going to actually spray paint something with that wooden peg BS? It was just shooting out globs of paint that was running everywhere! Also why would you narrow down a set of pliers to fit through a random slot in a random piece of metal? I could just keep going and going with this bunch of ridiculousness!
WHY
Кто нибудь отнимите у него инструменты, чтоб не портил. и камеру тоже. возомнил себя мастером. больно смотреть на всю эту хрень
Надо отправить к доктору дью 😅
красота до чего же!
The algorithm has failed me.
This guy's just sawing things in half and calling himself Leonardo Da Vinci
Every one of these is pointless
может не гения,а гея?
Опять порча инструмента.
Nice 👍
🤜🤛
Thanks !
Woww🤞🤞
Лучше ничего не трогай. Это, пожалуй, лучший совет для тебя будет.
1st coument
Kreen
Во бред
🤦
Pointless nonsense
This shit makes my teeth fucking itch wtf man
Creating more trash out of already bad Chinese tools. All fail
Ещё один олень которому некуда время девать
اللى يشوف تعليقى يصلى على الحبيب المصطفى
Is the best
supercilious
These are terrible ideas don't waste your time watching
👍👍👍👍👍
BY SUNY !! 🤙🏻
❤️👍
Идея с поворотным столом для сварки интересная , но вот исполнение это полный трешь , кто же подшипник приваривает , у него же обойма калёная и смазка внутри , на один раз конечно пойдет , но для постоянного использования , это жопа ! Остальное полный хлам и уродство инструмента ! Закусывайте дяденька !
These videos should be illegal.
Бля,что они курят?😂😂😂