A quick question. I'm familiar with using resistors to determine the output voltage. What is the formula for your power supply module to determine output voltage?
PLC programming with the Arduino:Recently, the openplcproject from Thiago Alves, PhD has been expanded to include several Arduino derivatives. Here is a small test program for an Arduino UNO for a test board with buttons, LEDs, potentiometers which is very well suited for PLC training. If there is interest, the program can be loaded onto a cloud for download.
hi, this video helped me a lot! thank you very much for the video. quick question, does the whole thing used the same ground that connected to the MCU?
The inputs are going through optocouplers so that's covered. The outputs are also galvanically isolated with relays so they are fine too. The rest depends on how well you make the PSU, filtering and shielding (if needed)
@@whatevernamegoeshere3644 but that arduino not protect from collapse relay magnetic at turn-off... Making the arduino processor not have reliability long time service... Arduino enthusiast & engineer for industries must learn sistem power & dissipate excess power & voltage for preventif and reliable long time service...
Hello , i love your project and i wanted to ask what program do you use to create the diagrams for the video ? They look gorgeous and detailed and i would like to use them for a project at university as well . Thank you
because we need to microprocessor to process the code etc Arduino uno mega esp 32 stm pic any micro controller or development board can be use Arduino is the easiest
Sir How are you...Sir i like videos.. I watch your plc 2.0 video. I make this project.. But have a problem.. Only arduino nano not found. I use arduino ide this work.. But simulator problem arduino not found. Please help me sir.
Sir, I had requested for Mppt 3.0 proteous file on fb page as well as email. It will be greatly appreciated if you could please respond. Thanking in anticipation
@@KiyanisLab Sir, I am trying to implement this project. While I have tried to redraw it myself, but it is causing problems. That is why i had requested for Proteous File..
hi please help me !!!!!! i used Arduino nano CH340G USB IC "Test for ArduinoNano Hardware on USB Checking ports for Arduino. Arduino not found " "or is numbered greater than COM9"
Congratulations, this is a great project, very nicely implemented. Your work is very impressive! For long time I was studying the possibility of using an Arduino as a PLC unit, but in the end I prefer using "real" ones due to compatibility issues. İf i may,i want also to point out that this is not regarded as a PLC because of its architecture, in the same way that Schneider "Zelio" is regarded as smart relay! This however, in no way reduces the value of this construction which is a great, amazing build!
Thank you so much! It will be handy for my university exams!! Thank you again!! Regards from buenos aires, argentina
HELLO WILL YOU HAVE THE FILE TO BE ABLE TO OPEN IT WITH PROTEUS SO THAT I CAN ADD SOME ELECTRONIC COMPONENTS TO THAT BOARD
A quick question. I'm familiar with using resistors to determine the output voltage. What is the formula for your power supply module to determine output voltage?
Which software are you used for lader programme
may be the 470uF is the cap used for 5v supply for the chip nano
Thank you very much..go on and don't be late for us with videos related to all Arduino ideas
Hello, good video. I want to make a plc like the one in your video, but where is the 470u capacitor connected to, how many volts is it? Thanks
What do I need to study to learn how to do this on my own?
please.. but what software do you use to cde ladder?
and then upload it to nano?
PLC programming with the Arduino:Recently, the openplcproject from Thiago Alves, PhD
has been expanded to include several Arduino derivatives. Here is a
small test program for an Arduino UNO for a test board with buttons,
LEDs, potentiometers which is very well suited for PLC training. If
there is interest, the program can be loaded onto a cloud for download.
What program You use for program ladder thanks?
Very nice video Arduino Nano PLC Programming Want to see more videos,
hi, this video helped me a lot! thank you very much for the video. quick question, does the whole thing used the same ground that connected to the MCU?
and on the power supply unit, does the 5V on your viddo connected to Vin on arduino?
Very Interesting, this will help me move fwd in my electronics hobbie, kind regards and hope to see more.
Hi sir I'm Gideon, which solfware do you use to upload the ladder program into the arduino
Nice project. But is it immune to heavy electromagnetic interference? Industrial PLCs are not affected by them, but Arduino is very sensitive
The inputs are going through optocouplers so that's covered. The outputs are also galvanically isolated with relays so they are fine too. The rest depends on how well you make the PSU, filtering and shielding (if needed)
@@whatevernamegoeshere3644 but that arduino not protect from collapse relay magnetic at turn-off... Making the arduino processor not have reliability long time service...
Arduino enthusiast & engineer for industries must learn sistem power & dissipate excess power & voltage for preventif and reliable long time service...
Sir your all work is best
Shouldn't pin 4 of the optocoupler be connected to 5V? And pin 3 connected to the GPIO pin of Arduino and ground?
Can I connect LCD to display and configure any variable
Thanks alot for that great work and ask you about soft using to program arduino as plc ladder
Could you confirm the size of the inductor? In the list it says 330mH but on the video you use a 330uH.
How do you make it possible to program arduino with PLC ladder diagram?
Can't
Open plc?
hey What is the program that you use for this PLC?
Thank you so much but i have two questions
how much voltage do need for the input terminals ?
and what is the output voltage of the relays terminals ?
use 12 volts
Amazing 😍😍
#theprojectlab
Hello , i love your project and i wanted to ask what program do you use to create the diagrams for the video ? They look gorgeous and detailed and i would like to use them for a project at university as well . Thank you
Hi glad you like it I make these diagrams with MS Power Point
@@KiyanisLab thank you alot , i thought you use something special with a library for the electric diagrams :) as it looked amazingly clean
QUE SOFTWARE ES?
How you make it.Can you please help me. I want to make this one right now.
How to add and the modify analog analog input from 0-10 V to be 4-20 mA?
it's have no diode to protect when we plug the wrong +-12v
And what do you do after that?
Big thank from thailand .
Agar is se stepper motor chlna ho to program kese bnaye Arduino plc se
What do the CI ULN2003 in the plc?
how you are use program to programing arduino
Hi can I know why you used Arduino nano?
because we need to microprocessor to process the code etc Arduino uno mega esp 32 stm pic any micro controller or development board can be use Arduino is the easiest
which software you are using to program this thing
Ladder Maker
Hi Kiyani
i watch our PLC making video.
Your video is very usefull.
Now you tell me
Which software are you used for PLC leader Programming?
ladder maker
@@KiyanisLab Leader maker
It is exists in your zip file?
Good Sir. Please tell me price of complete PLC unit. We can use it in Small PLC based project.
Здравствуйте, а чем программировать . PLC
The Relays linked Do not fit. If anyone has a link to the proper ones please share
Can you do such a video with stm32?
How to work automatic forward reverse control system
Very nice video
Your step-down converter does not work although.
yes what did to it? what is solution.
Programming software name please?
ladder maker its also in the zip file of project
@@KiyanisLab how can I get it sir?
How many step for this PLC?
Is it a big issue to use the 100uF 63V cap on C2 and a 330uH inductor on L1 like the video? the components list 470uF cap for C2
no you can use them
Afa dad! Killin me smalls.. nice tutorial tho.
Arduino nano Bluetooth 8 channel relay
Hi good morning my name ZAFAR i am from QATAR is this possible to order the same PCB
Where can this PLC card used
small scale industries
Cool. Please can you make gate motor controller using arduino. Thanks.
which software using to program it... can u tell that
Waltech ladder maker
Hi bro can share the schematic diagram file and the pcb layout design file
hello bro can i ask something about this your awesome project?
Yes? bro
@@KiyanisLab may i knoe your email add? so that we can communicate well, keep safe bro
Sir How are you...Sir i like videos.. I watch your plc 2.0 video. I make this project.. But have a problem.. Only arduino nano not found.
I use arduino ide this work.. But simulator problem arduino not found. Please help me sir.
Can you make gas purner controler
ok bro
Não consigo baixar os arquivos do projeto zip
Nice info, thanks:)
Thank you it s good work
Over voltage under voltage using Arduino
ok bro
Thank you so much
Good job 👍👍
pl make timer based project
It works with Open Plc
with adder maker
hi, have you tried this on OpenPLC?
Need this plc how can i get this
Sir like nhi chahiye answer chahiye
thank you prooo so much
Muy bien
Sir make an vfd for us
ok bro
👍👍👍 super
Need esp32+ST codesys
Good project.
Excelente trabajo gracias por compartirlo.
Very good
Sir hindi me bhi video banaye
Hey, can I get you to build me some boards?
Sure
Sir, I had requested for Mppt 3.0 proteous file on fb page as well as email. It will be greatly appreciated if you could please respond.
Thanking in anticipation
do you need it for simulations
@@KiyanisLab Sir, I am trying to implement this project. While I have tried to redraw it myself, but it is causing problems. That is why i had requested for Proteous File..
@@KiyanisLab whcih software u have used ? link
Gas burner seqvence controller pdf
hi
please help me !!!!!!
i used Arduino nano CH340G USB IC
"Test for ArduinoNano Hardware on USB
Checking ports for Arduino.
Arduino not found "
"or is numbered greater than COM9"
how did you solve the problem, I have the same problem
Mashallha
Usta ellerine sağlık. Röle bobinlerine diyot bağlasan daha güzel olurdu
uln2003 dahili diyotlara sahiptir
Congratulations, this is a great project, very nicely implemented.
Your work is very impressive!
For long time I was studying the possibility of using an Arduino as a PLC unit, but in the end I prefer using "real" ones due to compatibility issues.
İf i may,i want also to point out that this is not regarded as a PLC because of its architecture, in the same way that Schneider "Zelio" is regarded as smart relay!
This however, in no way reduces the value of this construction which is a great, amazing build!
wow
?
as always incomplete video
FAKE
Nice video. If you are interested to work on a automation please let know and I will share me email address. Thank you.
Eeee? Are you Robot???? After that, after that, after, and also dialect that is ..tragedy 😐
HELLO WILL YOU HAVE THE FILE TO BE ABLE TO OPEN IT WITH PROTEUS SO THAT I CAN ADD SOME ELECTRONIC COMPONENTS TO THAT BOARD
HELLO WILL YOU HAVE THE FILE TO BE ABLE TO OPEN IT WITH PROTEUS SO THAT I CAN ADD SOME ELECTRONIC COMPONENTS TO THAT BOARD
HELLO WILL YOU HAVE THE FILE TO BE ABLE TO OPEN IT WITH PROTEUS SO THAT I CAN ADD SOME ELECTRONIC COMPONENTS TO THAT BOARD