Just wanted to thank you for this video. I had to remove my fairings to do a coolant change and your instructions helped me tremendously. I might buy your integrated tail light kit soon!
This is great, I'm working on a friends bike today and one of her mods is a TST front signal swap on 40th Edition ZX6R, but the other's a Quadlock with power, and one of the fairings needed to come off for routing power anyway, and here this answers all the things without needing to remove both fairings. Thanks for this!
Oh sweet Jesus, putting the front scoop shrouds back in was a nightmare. Turning the wheel in the opposite direction of the side I was working on helped a lot but I lost 20 minutes trying before that. Thanks a ton for the informative videos. These are a huge help and personally I wouldn’t have bought these (as well as the fender eliminator and tail light) without step by step video instructions.
Sorry man...Kawi really convoluted that design. We did our best to break down the steps so anyone could follow but unfortunately we could not make the installation of our Nexus any easier than the OE signal lamps.
@@TSTindustries Love the vids and I’m glad to see you all are still at it. My first install was an integrated tail light in my ‘14 Ninja 300. Just bought my ZX-6R and I was glad to see there were detailed videos. The bike looks even better now - never going near those front fairings again though lol.
Thank you. Glad you like what we did. This project involved design and engineering time from more people than just me. This was really a team effort. I actually had less involvement in the mouse movements and keyboard strokes on this one. I was more involved in the design direction driving and project management, both in design and manufacturing stages.
Just installed mine! Love the look and the functionality. It hurt me comparing how clean your bike compared to mine with 6000 miles though! Keep making good stuff TST and i'll keep buying lol
Just finished my install. Great guide.. They look great. One thing, the step where the cable routings are undone from the metal. It was easier for me just to pull the wire out without undoing the clips
Could Kawasaki make things any MORE cumbersome to take things apart, lol ! Seriously the most overly-complicated design ever. I don't think I would have the patience required to do any mods on this bike. Kudos to you for doing it so well !
@@TSTindustries thanks, i got a question if i want to put after market mirrors , do u guys have a harness for that of can u custom one, because i dont see it in the website
@@TSTindustries hey I just made you a 20 second short showing you the specific connection in question. Can you briefly watch that and comment? It’s my newest “short” on my channel.
@@Utahforrest you won’t connect into either of both connectors on the bike side of the harness. Use the video at the link below and fast forward to the 4:45 mark. You will use the general installation process for the blue running light wire kit we provided. ruclips.net/video/8eXpWPtCbIg/видео.html
The method is shown in this video: ruclips.net/video/8eXpWPtCbIg/видео.html . If you choose the the setup using the running mate then the flow of the video is exactly what you will be using. If you are buying the version of Nexus that has the sequential signal and running light function then use this video for instructions how to connect the blue wire.
is the connector a 2 or 4 pin? my 2019 has a 4 pin connector coming off the harness and the blinkers have a 2 pin connector so theyre not plug and play for me..
I believe you found an incorrect connector. You can send photos of what youre looking at to our customer service department andvthose guys can help you out. If you dont want to wait until we open for the week, you can grab the wire coming out of your current signal lamps, run your hand upstream, and you will find the connector that matches the one on the new signal lamps we make
Sometimes you have to take a break and let the frustration subside. Please watch over the video again, in the disassembly and reassembly segments. This will remind you of all the tips we threw into the process.
Maybe the 2021 zx6r bracket is different but it did not fit between the fairing and the light. Had to put it on the other side because it hits the plastic ear on the light and the holes did not line up correctly. Doing this then causes the bracket to not align correctly with the inner fairing fastener and when you do finally get it lined up, it pushes the inner fairing away and leaves a gap. Very minor issue, but even the cheap chinese leds fit better than these did. Overall, i got it to work and they look great.
oh man... i just ordered these for my 2021 zx6r... now im worried theyre not gonna fit right :/ time will tell, i hope i dont have to reach out to their customer service
@@NikkotineMusic I wouldn't worry to much. Just know you may have to put the bracket on the outside of the light rather than between the light and fairing. When you put the inner fairing liner back in, once you get the part under the nose aligned, install the retainer in the point of the nose first to hold it up, then install the retainer on the side of the liner that goes to the hole in the bracket on the light. You may need to be a bit forceful to get out to line up. It is about 1/4" out of alignment.
Yesss exactly, I just installed it and this is the exact thing that happened to me, not a big deal though but I was confused. Other than that it came out really goooooood, its really bright.
Man this is kinda a pain. I don't feel like its this hard to get my right side panel off on my 2013 636 though. Is this correct? EDIT: this is wayyyyy easier on the 2013 year, ahahahaha, I'm sold.
@@TSTindustries but seriously, I mentioned this on one of your videos where I wanted a better solution to the bulky old style signal lights on the ninjas. I am glad you guys came out with this! Just got mine in today!
@@JukinJiga Yea, it took us a while. This product has been on the radar for a long time and then we really kinda flailed around with design ideas that we didn't really like. We took many stabs at a design direction until something popped and we built on that, the end result being what you see here. Hope you enjoy them. Cheers!
Impeccible timing. I was just going over my parts shopping list for my new zx6r last night and this pops up now! Oh yea will also get a set for my ninja 300
@@MatthewJohnsonblackhawk 2023 was the same model as this one, the changes happened in 2024. ruclips.net/video/gFiT6FGV7aA/видео.htmlsi=poQLkJC_ML_J_q70
@@MatthewJohnsonblackhawk 2024 and 2025 should be the same as Kawasaki did not announce any changes for the 2025 model. What’s different from what we show in the 2024 video?
On the right side when you disconnect the signal light there is another set of wires in that in the video are disconnected. Did you disconnect those too or do they come disconnected? Mine are disconnected and now im not sure if i did it or if its meant to be that way
Do not watch this video they make u do so many pointless steps and waste your time on taking off your side frames. All you need to do is remove the guard above your wheel and work from their. Disconnect your wires, unscrew your lights, screw them back in and reconnect your wires... done.
We do not make people do "pointless steps". We show the proper way to replace your signals as shown in the service manual and for customers all over who want to be sure they do things correctly and fully. Sure, you can find quick workarounds and there's nothing wrong with that but we show the full process.
If you found another way to perform this installation, that is great news but we show the full process to help people complete it as easily as possible.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Just wanted to thank you for this video. I had to remove my fairings to do a coolant change and your instructions helped me tremendously. I might buy your integrated tail light kit soon!
I am glad we were able to help you.
Can you give me the link to buy it? It is compatible for the kawasaki ninja zx-25r
@@joseluisbautistaflores2916 kii8&88 I imjm
J kk indi mom I a
I used it for the lights and m4 headers and cat delete as well! 😛
This is great, I'm working on a friends bike today and one of her mods is a TST front signal swap on 40th Edition ZX6R, but the other's a Quadlock with power, and one of the fairings needed to come off for routing power anyway, and here this answers all the things without needing to remove both fairings. Thanks for this!
Glad we could provide help!
Oh sweet Jesus, putting the front scoop shrouds back in was a nightmare. Turning the wheel in the opposite direction of the side I was working on helped a lot but I lost 20 minutes trying before that.
Thanks a ton for the informative videos. These are a huge help and personally I wouldn’t have bought these (as well as the fender eliminator and tail light) without step by step video instructions.
Sorry man...Kawi really convoluted that design. We did our best to break down the steps so anyone could follow but unfortunately we could not make the installation of our Nexus any easier than the OE signal lamps.
@@TSTindustries Love the vids and I’m glad to see you all are still at it. My first install was an integrated tail light in my ‘14 Ninja 300. Just bought my ZX-6R and I was glad to see there were detailed videos. The bike looks even better now - never going near those front fairings again though lol.
How to take the fairing off is really well explained. Excellent. Thanks
Glad it helped!
Your soo specific and professional I think your last name is Kawasaki !!! Good job man !!
Thank you, thank you. We pride ourselves on precision in designing the parts as well as providing the instructions for installation.
Nice work, I no longer own a Kawasaki but it’s a beautiful piece of engineering Bart.
Thank you. Glad you like what we did. This project involved design and engineering time from more people than just me. This was really a team effort. I actually had less involvement in the mouse movements and keyboard strokes on this one. I was more involved in the design direction driving and project management, both in design and manufacturing stages.
@@TSTindustries my bad great work to the whole team that made it happen, I love my integrated tail light for my CBR650F
Just installed mine! Love the look and the functionality. It hurt me comparing how clean your bike compared to mine with 6000 miles though! Keep making good stuff TST and i'll keep buying lol
Well, we gave this bike quite the detail job when it came in. It was not as clean as shown in the video until we put about two hours into it.
Just finished my install. Great guide.. They look great.
One thing, the step where the cable routings are undone from the metal. It was easier for me just to pull the wire out without undoing the clips
Good tip!
Could Kawasaki make things any MORE cumbersome to take things apart, lol ! Seriously the most overly-complicated design ever.
I don't think I would have the patience required to do any mods on this bike.
Kudos to you for doing it so well !
Modern supersports are sort of like puzzles with the way they fit together. Just take it slow and be patient!
Just installed, so much better , love how they throw the light on the street, 👍
Do this fit a 2021 zx6r??..... it is jus plug and ready?? Or do i have to buy a relay?
This is completely plug-and-play as shown in the video. A relay will correct your flash rate.
@@TSTindustries thanks, i got a question if i want to put after market mirrors , do u guys have a harness for that of can u custom one, because i dont see it in the website
My turn signals just came for my 2023 ZX6R and there is an additional connector than the signals in this video. What is it for?
That connector is for the optional running light function. If you do not wish to use that, you can leave it disconnected with no issues.
@@TSTindustries I wonder why my bike has the female connector on the right side but the left side doesn’t have that DRL cable at all
@@TSTindustries hey I just made you a 20 second short showing you the specific connection in question. Can you briefly watch that and comment? It’s my newest “short” on my channel.
@@Utahforrest you won’t connect into either of both connectors on the bike side of the harness. Use the video at the link below and fast forward to the 4:45 mark. You will use the general installation process for the blue running light wire kit we provided.
ruclips.net/video/8eXpWPtCbIg/видео.html
Working on getting the fairings off. So far it’s a pretty straight forward job. The front panels are a pain.
So what’s The Sequential Nexus Signals? And running lights? Compare to standard? Thank you.
We have a gif on our product page showing the difference between the standard and sequential versions.
If you opted for the signals to operate as running lights, what’s the wiring instructions for that?
The method is shown in this video: ruclips.net/video/8eXpWPtCbIg/видео.html . If you choose the the setup using the running mate then the flow of the video is exactly what you will be using. If you are buying the version of Nexus that has the sequential signal and running light function then use this video for instructions how to connect the blue wire.
is the connector a 2 or 4 pin? my 2019 has a 4 pin connector coming off the harness and the blinkers have a 2 pin connector so theyre not plug and play for me..
I believe you found an incorrect connector. You can send photos of what youre looking at to our customer service department andvthose guys can help you out. If you dont want to wait until we open for the week, you can grab the wire coming out of your current signal lamps, run your hand upstream, and you will find the connector that matches the one on the new signal lamps we make
I really want it, can it be shipped to Japan?
You can get them in Japan at axxl.jp
Nice. Very big difference
Awesome work brother !!!
Am getting my new ZX6R in 2 months !!!
Am using all of the products in your videos, thanks for the videos
Right on bro! Great to hear. Hopefully you can make your photos public and share them with us after you install.
We need a undertail tag kit for the 2021 cbr 1000rrr
I don't know if I want to spend a lot of time on making a part that will sell maybe 100 units per year.
Can you give me the link to buy it? It is compatible for the kawasaki ninja zx-25r
Great video but i can't get the shouds back in spend about half hour trying and had to give up before i broke something
Sometimes you have to take a break and let the frustration subside. Please watch over the video again, in the disassembly and reassembly segments. This will remind you of all the tips we threw into the process.
Maybe the 2021 zx6r bracket is different but it did not fit between the fairing and the light. Had to put it on the other side because it hits the plastic ear on the light and the holes did not line up correctly. Doing this then causes the bracket to not align correctly with the inner fairing fastener and when you do finally get it lined up, it pushes the inner fairing away and leaves a gap. Very minor issue, but even the cheap chinese leds fit better than these did. Overall, i got it to work and they look great.
oh man... i just ordered these for my 2021 zx6r... now im worried theyre not gonna fit right :/ time will tell, i hope i dont have to reach out to their customer service
@@NikkotineMusic I wouldn't worry to much. Just know you may have to put the bracket on the outside of the light rather than between the light and fairing. When you put the inner fairing liner back in, once you get the part under the nose aligned, install the retainer in the point of the nose first to hold it up, then install the retainer on the side of the liner that goes to the hole in the bracket on the light. You may need to be a bit forceful to get out to line up. It is about 1/4" out of alignment.
Yesss exactly, I just installed it and this is the exact thing that happened to me, not a big deal though but I was confused. Other than that it came out really goooooood, its really bright.
Man this is kinda a pain. I don't feel like its this hard to get my right side panel off on my 2013 636 though. Is this correct?
EDIT: this is wayyyyy easier on the 2013 year, ahahahaha, I'm sold.
Damn TST! Stop taking my money :)
It's our job!
@@TSTindustries but seriously, I mentioned this on one of your videos where I wanted a better solution to the bulky old style signal lights on the ninjas. I am glad you guys came out with this! Just got mine in today!
@@JukinJiga Yea, it took us a while. This product has been on the radar for a long time and then we really kinda flailed around with design ideas that we didn't really like. We took many stabs at a design direction until something popped and we built on that, the end result being what you see here. Hope you enjoy them. Cheers!
Impeccible timing. I was just going over my parts shopping list for my new zx6r last night and this pops up now! Oh yea will also get a set for my ninja 300
Perfect!
Why do you guys not have any videos of 2023 and up???
@@MatthewJohnsonblackhawk 2023 was the same model as this one, the changes happened in 2024.
ruclips.net/video/gFiT6FGV7aA/видео.htmlsi=poQLkJC_ML_J_q70
@@TSTindustries sorry that’s what I meant. I have a 2025 and it’s not the same as these videos you have
@@MatthewJohnsonblackhawk 2024 and 2025 should be the same as Kawasaki did not announce any changes for the 2025 model. What’s different from what we show in the 2024 video?
@@TSTindustries trying to access the flash inhibitor. I can’t find it
@@MatthewJohnsonblackhawk do you mean the flasher relay?
Awesome!!!!
Thanks!!
On the right side when you disconnect the signal light there is another set of wires in that in the video are disconnected. Did you disconnect those too or do they come disconnected? Mine are disconnected and now im not sure if i did it or if its meant to be that way
We will need some more detail on which wires you are referring to. Maybe send the time stamp showing the detail.
@@TSTindustries 8:58
It's just in between 858 and 859. Two wires in the same protective cover as the turn signal wire.
@@calanolson4999 i see the ones with the bullet connectors in that boot. On the bike we used they were not connected to anything.
Can't wait to get mine. OEM is dreadful in comparison
We agree!
Damn... Here I was thinking that the ZX6R was gonna be the easy one.. 🥺
We did too.... 😅😅 Damn you Kawasaki
Make a led headlight boys
Do not watch this video they make u do so many pointless steps and waste your time on taking off your side frames. All you need to do is remove the guard above your wheel and work from their. Disconnect your wires, unscrew your lights, screw them back in and reconnect your wires... done.
We do not make people do "pointless steps". We show the proper way to replace your signals as shown in the service manual and for customers all over who want to be sure they do things correctly and fully. Sure, you can find quick workarounds and there's nothing wrong with that but we show the full process.
Came from safari youtube and saw your comment, had to say i agree this video is pointless, idk how you manage to turn a 5 minute video into about 30
un trabajo mal hecho estuvo demas desarmar todo el carenado solo era sacar lad dos tapas delanteras y eso era todo
If you found another way to perform this installation, that is great news but we show the full process to help people complete it as easily as possible.