555 Monostable Tutorial
HTML-код
- Опубликовано: 16 сен 2024
- 555 monostable tutorial- A Monostable Circuit produces one pulse of a set length in response to a trigger input (pressing the push button). The output of the circuit stays in the low state until there is a trigger input, hence the name "monostable" meaning "one stable state".
This type of circuit is ideal for use in a "push to operate" system for a model displayed at exhibitions. A visitor can push a button to start a model's mechanism moving, and the mechanism will automatically switch off after a set time.
excellent..i was looking for this for a long time.finally i got it.thanks a lot.
Thanks bro. Now I understand it properly
te agradezco el video me funciono, ahora sigo con el timer deco
con cuantos volts es?
Best ever explanation
wow !!!!!!!!!!
spot on perfect!!!!!!!!!! !!! the only thing that would have made it better is if you talked up through it and gave us a schematic. thanks mike
Good video! It was very helpful!
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
I followed along and it works, BUT...my LED is reeeeally dim. It seems like the resistor on pin 3 is reducing the battery's output below the suggested amount, but of course, eliminating it makes the LED stay on 24/7. Help is very much appreciated!
We're not doing reverse engineering, a schematic is a must.
Thanks! It works, make sure capacitor is more than 100 uF
How about if I press and hold the button. The output will stays in high state forever or just for an interval time?
forever
What will the circuit look like to achieve the above setting.?
So that even when the button is pressed still there will only be short single pulse High.
yes.. it is for a digital clicker to train dogs.
for example like in this video... but i want it with a buzzer. ruclips.net/video/jhuwdn5fKnw/видео.html
Thankyou ...useful... One...
is there any way of making this work without a push button (i.e a constant trigger).
This NE555 circuit is for "Monostable mode". the circuit will start to count the time once the button(pin 2) is being trigger. If you want a constant swap between On/Off, it is "Astable mode". You can easily find it from most of the NE555 IC specification, say Texas Instrument.
I'm wanting to do something similar except I'm wanting to use a micro switch off the board and the power supply will be a 12v motorcycle battery. I am wanting a large Car LED to stay on for 3 to 5 seconds once the micro switch is pressed. Could you help out with this? I would be happy to compensate you for your time and help.
Theks bro
Thanks man
Very helpful
Would I appreciate it if you showed us the scheme of the installation?
Its you who decide how long the LED will stay on by changing the capacitor value ?
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
just the music I wanted to hear
Tanks my partners
mbae pio la oikopaa kp ndorekoi ko nde video la esquema ha pea kausa ndoikoi che proyecto hendy hina la situ kp!!!!!!!!! mojoli ndoperdonai oree >:d
XD
thanks you so much😙
U use 9 volt battery?
Thanks this a lot. This is good and simple. How about connecting capacitor to pin 5 for Bistable Multivibrator
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
May I see the circuit diagram please? Namra Jyv Agustines Thank you very much :)
muchas gracias, fue de mucha ayuda o/
Sir in my it is not holding when I release the button the led also get turned off
Is the LED also going out if the switch keep being pressed?
nice but you should put a circuit layout so we can draw it out
how about pressing and holding the button, or repeatedly pressing it quickly to demonstrate the logic in the circuit.
Diesel Ramcharger I thought this demonstrated the logic of the 555 monostable operating mode quite well?
Thanks for this tutorial but I have a question please..What about the same circuit without time ? Only push once and keep the led powered until the next push ? Thank you
Search for flip flop electronics and you will find what you need. I know its a little late but if this helped... it helped.
Meneltour27 ... Yes a flip flop circuit would work well
if I'm not wrong ..don't u connect a small capacitor (0.01F)with pin 5 to ground?
that is what im thinking too
Thanks !!!
How do you know it's functioning correctly?
You don't.
by adding the capacitance of the capacitor and decreasing the resistance, could it possibly reach 7 seconds?
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
if, instead of an LED you put it through the middle pin of a transistor between negative and a buzzer, what do you get?
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
what if i don't have that button
you will need:
garlic bread
weed
a datasheet
coffee
2kg of alligator crocodile jumper cables
an antibouncing pushbutton 100nF always open
electrons
2 dozens male male jumper cables
short term memory
do you know what values of resistors and capacitor do i need to use for a time of 10 seconds?
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
hey men, why 3 resistors?
I like the intro music... it reminds me of a "raved up" version of something I used to play. :)
BUT... it's a bit of a distraction in a turtorial... I'd rather have a human voice explaining things instead. :(
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
why have you got three resistors should be one
Can i change the capacitor value to change the duration of led
KK PANDIAN Yes you can. Remember Time=1.1(R1)(C1)
como le hago para saber si mi 555 no funciona ?
My light is on, then when I hit the switch it turns off for a certain amount of time, lol. What the hell am I doing wrong?
He shows that happening in the video
@@jonh.5317 hey man..sorry. this was so long ago I can't even remember doing this...lol.. I do remember getting all three 555 times functions working but... I just dont remember that particular problem.
how can i know about these type of ic.
Best monostable tutorial
ruclips.net/video/1PFKwud-TKI/видео.html
Manque potentiomètre ajustable
hii you are a electronic engg.
y el pin 5 queda al aire
muy bueno, pero pon tamvien el esquematico
Circuit diagra. please !!
background music is awesome
I simulated this in Proteus but not it worked.
q trilha sonora desgraçada
skip the annoying sound!
yawn