quick question, the mini pcie for LTE modul supports usb 3.0, for LTE Cat 6/12 etc. cards Quectel or Sierra wireles? I dont found infarmation about this :)
Hey, The USB 2.0 standard offers a theoretical maximum signaling rate of 480 Mbps and I believe Mini PCIE 2.0 bus should be enough to handle LTE cat 6. Most of the USB 3.0 device will be backward compatible with USB 2.0. If you have any doubt, please check with the vendor to confirm this.
Hello, if you want to configure load balance between 2 cellular networks, you need 2 modems. This board only has 1 connector for modem, you will have to use another USB modem. There is a tutorial about multiwan load balancing at ruclips.net/video/f_yGMezdMB0/видео.html. If you want to learn more about modem configuration on OpenWRT, feel free to check it out on my channel!
It is officially supported by OpenWrt now, so you can get the firmware from openwrt.org and flash it to the device. downloads.openwrt.org/snapshots/targets/ipq40xx/generic/
Trong video description mình có để link đó bạn, hoặc bạn có thể email cho bạn sale bên đó: linda@wallystech.com và nói tìm thấy contact từ Van (từ mình). Giá họ bán là khoảng 70 USD.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
quick question, the mini pcie for LTE modul supports usb 3.0, for LTE Cat 6/12 etc. cards Quectel or Sierra wireles? I dont found infarmation about this :)
Hey, The USB 2.0 standard offers a theoretical maximum signaling rate of 480 Mbps and I believe Mini PCIE 2.0 bus should be enough to handle LTE cat 6. Most of the USB 3.0 device will be backward compatible with USB 2.0. If you have any doubt, please check with the vendor to confirm this.
@@VanTechCorner Thanks for your answer, I'm looking for something with usb3.0, preferably with M.2
I think you can build an x86 PC to run OpenWRT, or looks as those motherboard with CPU soldered, such as the N3700.
Could I ask what did you use for a power supply? just bought a DR4029 , Thank You in Advance.
Can this product do load balancing between two Cellular sim cards?
Hello, if you want to configure load balance between 2 cellular networks, you need 2 modems. This board only has 1 connector for modem, you will have to use another USB modem. There is a tutorial about multiwan load balancing at ruclips.net/video/f_yGMezdMB0/видео.html. If you want to learn more about modem configuration on OpenWRT, feel free to check it out on my channel!
how to upgrade this to latest openwrt?
It is officially supported by OpenWrt now, so you can get the firmware from openwrt.org and flash it to the device.
downloads.openwrt.org/snapshots/targets/ipq40xx/generic/
good info, where i can find a Openwrt image? link?
Please contact your supplier for the image or build your own firmware from this github.com/sartura/openwrt/tree/DR40X9
@@VanTechCorner are there pre built builds available ?
Can bypass hotspot?
All OpenWRT can change TTL and install SSR / OVPN (a.k.a bypass hotspot)
Where to buy? Link?
Hi, the link is in the video description or you can contact linda@wallystech.com and mention that got the info from Van.
Hi a, e ở việt nam thì làm thế nào mua đc cái board này. Thank a
Trong video description mình có để link đó bạn, hoặc bạn có thể email cho bạn sale bên đó: linda@wallystech.com và nói tìm thấy contact từ Van (từ mình). Giá họ bán là khoảng 70 USD.