My race setup is square 17x8.5 et40 wheels with 255/40-17 (200 treadwear) tires. Had no rubbing with factory camber adjustments set to max negative, front and rear. I now have front camber plates and tubular adjustable rear arms. Also did some minor fender rolling in the rear so the ride height can be pretty low without rubbing at all. I don't use crazy negative camber either. Maybe 3-4° at most if I remember right. Side note; sticky 255 tires up front aren't very nice for street driving, but I love them for racing. Makes the steering feel much heavier. Wheel alignment has to be perfect or you'll destroy the fronts quickly. I broke 2 power steering pump shafts and then upgraded to the newer "high pressure" pump and have been fine since. Also at full lock, the front tires can kiss the frame rail a little, so I wouldn't recommend drifting with 255's up front. Took me a while to figure out why I was spinning.
I think i talked to you on one of the fb groups about your calipers lol. I finally was able to install them thanks to your info.🙏🏻 I also just installed m3 side mirrors on my 330ci zhp. I suggest making a DiY on that for the sedans since there arent that many videos on it.
Brother i have a 04 325Ci Convertible, just got me some 18x8.5 +35 and 18x9.5 +35 i was thinking of running a squared 225/40/18 all around w/ a little stretch. Car is bone stock suspension and no rolled fenders. Whats your thoughts?
Dear , Can you help me? I have the same car but there is a smell in the car coming from down the car. If I change the fuel filter or charcoal. smell will go?
@@hellodanielchoi I actually saw Style 37 wheels on a 330ci with 265s on them. Unfortunately I wasn't able to catch the owner.. but its doable! But, wish I knew the specifics on the wheels.
18x9.5 et35? How? I test fit the same size wheels on my e46 and they poked out a good about passed the fenders and looked goofy yet yours are almost flush/slightly tucked? Am I missing something?
@@hellodanielchoi like pulling the fenders too? Because they stuck out like a good amount. Maybe almost and inch, maybe less but definitely would be a poke fitment. And I’m on stock sport suspension
@@hellodanielchoi yeah buddyy cuzin rory i been picking upp another bmws m3 series i have just pick upp another bmw 320i e46 with no wof an rego for drift car come with set off stretched tires an i. got too do abutt off fender rolling idk got it for $500 ono. bucks an it owns me $1,200 for new wof an rego an few another thinks needed too been done on it an my another bmw 330i e46 i have pulling the fenders too ????? maybe almost an inch as it has stretched tires on it an. i have install a. new pipe tho out the ass end off my bmw 330i e46. an my another bmw 325i. e46 my another bmw 330i e46. bmw 328ci e46 bmw 323i e46 big drift wing spoiler install. an. hydo e handback install as well
Do you think if I did a square 18x8.5 I could have a offset of +35 with stock equipment minus coilovers pretty much. Normal sized drilled slotted rotors. I am unsure what would look the best. (06 325ci
@@hellodanielchoi yeah daniel choi is this the same fenders as a 2001 BMW 325i E46. JUST ASKING AS I AM BUILDING MY MY ANOTHER NEW THAT I JUST GOT FEW WEEKS BACK DOWN SOUTH ISLAND OFF NEW ZEALAND IN CHRISTCHURCH NEW ZEALAND. NEEDS SOME WORK DONE TOO IT ETC. NEW 2001 BMW 330I E46 FACE SWAP BMW 325I E46. ONTO MY NEW DIALY WORK HACK DRIFTER STREET LEGEAL CAR THESE ARE THE SAME FENDERS ,,,,,, You will need too roll your fenders though etc. i have buying a fender roll tools etc too do it on my bmws daniel choi
The wheels actually ended up fitting. I guess a previous owner could have rolled the fender not really sure. also the car is m sport if that makes a difference
@@hellodanielchoi HI DANIEL CHOI BMW 330I E46 GUY HOWS IT BEEN FOR YO IN LOCKDOWNS BROTHER ITS YOUR FREIND RORY WITH THIS BMWS OVER IN NZ NEW ZEALAND. YO STILL GOT YOUR 2001 BMW 330I E46 SOME AS MY ONE BRO.
@@hellodanielchoi yeah hows it going over your away daniel choi uncle rory aka cuzin rory still working on my 2 bmw 330i e46 an my other one bmw 325i e46. daily driver for work
My race setup is square 17x8.5 et40 wheels with 255/40-17 (200 treadwear) tires.
Had no rubbing with factory camber adjustments set to max negative, front and rear.
I now have front camber plates and tubular adjustable rear arms. Also did some minor fender rolling in the rear so the ride height can be pretty low without rubbing at all. I don't use crazy negative camber either. Maybe 3-4° at most if I remember right.
Side note; sticky 255 tires up front aren't very nice for street driving, but I love them for racing. Makes the steering feel much heavier. Wheel alignment has to be perfect or you'll destroy the fronts quickly. I broke 2 power steering pump shafts and then upgraded to the newer "high pressure" pump and have been fine since. Also at full lock, the front tires can kiss the frame rail a little, so I wouldn't recommend drifting with 255's up front. Took me a while to figure out why I was spinning.
I think i talked to you on one of the fb groups about your calipers lol. I finally was able to install them thanks to your info.🙏🏻 I also just installed m3 side mirrors on my 330ci zhp. I suggest making a DiY on that for the sedans since there arent that many videos on it.
Hey Vance! I am glad that my video helped you out! Thanks for the video suggestion! I may do that
Thanks for share it
My pleasure
What bigger breaks can I put on my 2002 E46 330XI ??
Brother i have a 04 325Ci Convertible, just got me some 18x8.5 +35 and 18x9.5 +35 i was thinking of running a squared 225/40/18 all around w/ a little stretch. Car is bone stock suspension and no rolled fenders. Whats your thoughts?
Thank you for you advise
You're welcome 😊
What were your tire specs on the bmw wheels you previously owned?
Stock suspension?
ST coilovers
Dear ,
Can you help me? I have the same car but there is a smell in the car coming from down the car. If I change the fuel filter or charcoal. smell will go?
where did you order the front lip?
Check out my latest video
Nice video.. have you tried 265 tires on the rear with your 18x9.5 et35? Been thinking if it will fit my 330ci if I had 265 rear and 255 front..
Not yet
@hellodanielchoi would you have a suggested offset and wheel size to fit 265s? Thinking of 18x9 or 18x9.5 but still uncertain on offset for the rears
265s are really big, not sure if it will fit
@@hellodanielchoi I actually saw Style 37 wheels on a 330ci with 265s on them. Unfortunately I wasn't able to catch the owner.. but its doable! But, wish I knew the specifics on the wheels.
18x9.5 et35? How? I test fit the same size wheels on my e46 and they poked out a good about passed the fenders and looked goofy yet yours are almost flush/slightly tucked? Am I missing something?
You have to have stretched tires and roll your fenders!
@@hellodanielchoi like pulling the fenders too? Because they stuck out like a good amount. Maybe almost and inch, maybe less but definitely would be a poke fitment. And I’m on stock sport suspension
@@hellodanielchoi yeah buddyy cuzin rory i been picking upp another bmws m3 series
i have just pick upp another bmw 320i e46 with no wof an rego for drift car come with set off stretched tires an i. got too do abutt off fender rolling idk got it for $500 ono. bucks an it owns me $1,200 for new wof an rego an few another thinks needed too been done on it an my another bmw 330i e46 i have pulling the fenders too ????? maybe almost an inch as it has stretched tires on it an. i have install a. new pipe tho out the ass end off my bmw 330i e46. an my another bmw 325i. e46 my another bmw 330i e46. bmw 328ci e46 bmw 323i e46 big drift wing spoiler install. an. hydo e handback install as well
Do you think if I did a square 18x8.5 I could have a offset of +35 with stock equipment minus coilovers pretty much. Normal sized drilled slotted rotors. I am unsure what would look the best. (06 325ci
yes, it would fit
@@hellodanielchoi thanks man! I’ve got the size down, just wasn’t sure on offset. Much appreciated.
@@andrewyork8513 did it fit??
is this the same fenders as a 2001 bmw 325i? im thinking of running the same wheel and tire specs
These are the same fenders. You will need to roll your fenders though.
@@hellodanielchoi yeah daniel choi whats upp my homies.
@@hellodanielchoi yeah daniel choi is this the same fenders as a 2001 BMW 325i E46. JUST ASKING AS I AM BUILDING MY MY ANOTHER NEW THAT I JUST GOT FEW WEEKS BACK DOWN SOUTH ISLAND OFF NEW ZEALAND IN CHRISTCHURCH NEW ZEALAND. NEEDS SOME WORK DONE TOO IT ETC.
NEW 2001 BMW 330I E46 FACE SWAP BMW 325I E46. ONTO MY NEW DIALY WORK HACK DRIFTER STREET LEGEAL CAR
THESE ARE THE SAME FENDERS ,,,,,, You will need too roll your fenders though etc. i have buying a fender roll tools etc too do it on my bmws daniel choi
heyy do you think 19x 8.5 square would fit on bmw e46 325ci with 255/35 tires?
no, you would need to roll, shave and perhaps have camber at the back for it to fit
The wheels actually ended up fitting. I guess a previous owner could have rolled the fender not really sure. also the car is m sport if that makes a difference
do you think I can run 18x10.5 et 30 in the rear and 18x9.5 et 35 in the front? on a bmw 2001 325i.
You will have trouble fitting the rears. The fronts should be ok!
why tho
Et:20?? Or Is that the offset?
hi mate, what do you think about daily driving with 18x8 et30 215/40 and 18x9 et35 245/35 ?:)
on coilovers to :)
How did you change the lug pattern of the wheels
you have to bring it to a wheel shop for them to re-drill it
@@hellodanielchoi HI DANIEL CHOI BMW 330I E46 GUY HOWS IT BEEN FOR YO IN LOCKDOWNS BROTHER ITS YOUR FREIND RORY WITH THIS BMWS OVER IN NZ NEW ZEALAND. YO STILL GOT YOUR 2001 BMW 330I E46 SOME AS MY ONE BRO.
@@hellodanielchoi I HAVE BEEN BUSYING DOING THE MAHI MAHI MAHI MAHI IN LOCKDOWNS OFF 2020. AN 2021 NOW DANEL CHOI
YEAH BRO ITS RORY YOUR FREIND FROM NZ NEW ZEALAND
@@hellodanielchoi JUST BEEN PICKING UPP OTHER BMWS AROUND NEW ZEALAND FOR CAR PARTS DANIEL CHOI WRICKED BMW 325I E46. BMW 330I E46
Awesome
Can you write down the diameters of your wheels? Im from germany and i dont understand all the words
18 x 9.5 et 35
@@hellodanielchoi all 4 wheels? Thank you so much
@@Timbaland135 all 4 wheels!
dude i have some Beyern Mesh wheels to throw on mine 18x9.5 +30 and i really REALLY don't wanna roll fenders lol
You can try and do a test run on it and see if it rubs
@@hellodanielchoi MY BMW 330I E46 HAS BEEN LOWERED ON AIR BAGGSS DANIEL CHOI UNCEL RORY FROM NEW ZEALAND
@@hellodanielchoi well yo been comeing over too new zealand sometime daniel choi if yo can come over too nz. too hang out an meet up with me rory
@@hellodanielchoi yeah hows it going over your away daniel choi uncle rory aka cuzin rory still working on my 2 bmw 330i e46 an my other one bmw 325i e46. daily driver for work
@@hellodanielchoi yo well have too comeover too new zealand sometime daniel choi too meet up with rory
Help urgent
I star my proyect 2004 bmw e46
nice dude! keep me posted on the progress!!!
let me get those wheels
lol u serious?