Pozdrav, Da li možete da mi napišete kako treba podesiti portove u winproladder i ako treba još nešto? Naime kad podesim parametre na frekventnom on izbaci alarm CALL i šta god pokušavam da podesim u winproladder ne mogu da uspostavim komunikaciju. PLC je Fbs 20MA i imam na njemu karticu CB55-8.
In V1000 manual, there's "memobus" all around. Do we have to select between memobus or modbus within any parameter? Or will it accept a Modbus command right away?
hello sir today i connect omron plc and yaskawa v1000 inverter and but no have communication with plc and i use rs232 to rs485/422 converter i use 4 wire no have communication this plc setting wich i use plc can told me
nice job :) Fatek forever
Olá, teria como vc fazer um exemplo com Modbus TCP/IP, Fatek Para o A1000.
Hello, could you make an example with Modbus TCP/IP, Fatek For the A1000
Pozdrav,
Da li možete da mi napišete kako treba podesiti portove u winproladder i ako treba još nešto? Naime kad podesim parametre na frekventnom on izbaci alarm CALL i šta god pokušavam da podesim u winproladder ne mogu da uspostavim komunikaciju. PLC je Fbs 20MA i imam na njemu karticu CB55-8.
In V1000 manual, there's "memobus" all around. Do we have to select between memobus or modbus within any parameter? Or will it accept a Modbus command right away?
हिंदी में बोलकर समझा दीजिए
please can you send me a document how you can make communication betewen plc and v1000 exactly ??
Can you make a video same fatek plc modbus for delta c 2000 or vfd m series
Thanks in advance
Or what is 400002 and what will use here for delta drive
Sorry, we don't work with Delta device.
hello sir today i connect omron plc and yaskawa v1000 inverter and but no have communication with plc and i use rs232 to rs485/422 converter i use 4 wire no have communication this plc setting wich i use plc can told me
SRIDHARAN SRI ... Only use two wire 485...nothing more.
i need help, hoy did you set the parameters?
my yaskawa send alarm (CALL)
PLEASE HELP!!
Gerardo Tellez Lopez It is OK, next go to winprolader and set comunication to modbus.
what is a winprolader??
look, when I configure the parameters
b1-01---> 02
b1-02---> 02
my drive send alarm CALL and i dont know why.
I'm using a schneider electric controller
This is settings only for FATEK PLC .
You drive default setting A1-02
Mister please I need setting parameter..give me mister
Nemaš ništa na domaćem