Using it in anger - I hear ya' Brother! I agree though, after you get over the trauma of changing software, it is actually easier to use. I think for us dinosaurs that have used 6 for so long, the change is a bit laborious, but for a newbie, the software would be quite user friendly. Keep up with the great tutorials! 😀
Yeah I think it’s the change. I find the same every time windows or iOS changes. We go through the emotional change curve and the faster we can get to acceptance the better 😂Cheers!
I love Picoscopes and use them in the colleges where I teach, but as somebody who gets migraines from bright white screens, the dark mode is much welcomed.
Hi, I bought the pico 2204 sometime ago and I’m sad to say that I haven’t even plugged it in yet, I just wanted to ask if the pico 7 course will show me how to use the 2204 as I can’t afford the automotive version. Kind regards, Chris.
Hi Chris, yes it will help. If you join the Diagnostic Coach monthly it has the Pico 7 Intro Course and lots more! Great value too. www.mechanicmindset.com/diagnostic-coach
Outra parte bacana que mesmo nao tendo o Pico qualquer um pode baixar e ver como funciona ! Outra coisa sao os Tipos de Sinais que podem ser olhado no bamco de Dados. Muito bom
Good day . finally 2204a up and running. I did purchase your mechanic mindset course .love it . looking to find the attenuator setting for 20 to 1 . In pico 7 . Its sure fun trying to figure out lol. Cheers 🍺
You said in pin 6 14 resistance video that you can get a Pico for a £100. Whats the difference though between that and the Picoscope automotive which is not anywhere near £100. Several thousands I think.
I keep getting "NO DATA" when I trying to open picoscope 7 on windows 10 and it automatically shuts down the program. Have uninstalled, reinstalled, rebooted, downloaded latest version, tried opening it with scope hooked up and not hooked up, tried both versions of the software (stable and early access) all to no avail. Anyone else have this problem? Thank you.
What specs is your laptop running. Got a 4425a but struggles at times and freezes with PicoScope 6 automotive and doesn’t want to know when I try pico7. Think it’s time for an upgrade. Great content on the channel by the way.
So I did this video on a desktop, but my laptop is old but well specd (Dell Precision M3800 i7-4712HQ [Quad] 2.30GHz 15.6" 4K Touchscreen 16GB RAM NVIDIA ) I just copied the order off the email, I bought it refurbished That being said, if I use my DSLR as a webcam at the same time as recording the screen, it was a bit slow. But on its own it’s fine. Thanks, glad you enjoy the channel!
Hi down loaded pico 7 and had a play ,love it ,much easier to use and understand with your insight!! What amp clamp would you recommend for parasitic current draw using the picoscope 2204A scope ? Thanks
Great to hear! To get an accurate reading for battery drain test, you will have to buy and expensive clamp. Something like the TA189. You could catch vehicle wake ups with a cheaper clamp. Or use a current shunt with a math channel which is probably the most cost effective method 👍
What is the difference between the following? And which one do you recommend please? 1. Pico Technology PP966 PicoScope 2205A-D2 2.Pico Technology PP907 PicoScope 2205A 2 Channel 25 MHz USB Oscilloscope 3. PicoScope 2204A-D2 two channel 10 MHz USB oscilloscope without probes
i love pico scope but i am living right now in Jordan for a family emergency, labor for tech is very cheap vs pico scope 7 price in most 3ed world countries so I am using pico scope 2204A thanks for the video Mate
I hope everything is ok mate. Don’t forget, you can still use Pico 7 with your 2204A! Go to PicoTech.com to download. I am using my 2204A with PicoScope 7 in this video. Check it out it’s free 👍
Hello, I am writing to you from Colombia. and I need some advice, the 2204a oscilloscope is better than the 2205a and either of them can be connected with the pico scope7 software without any problem or some modification has to be done. Thank you.
I am afraid there is a snag in moving from picoscope 6 to 7. For tests on my classic cars i develop the set ups in pico 6 automotive demo mode and save them. Next I can open them in the standard pico 6 software for my 2204 Running Pico 7 on the 2204 and trying to open such a setting from p6 automotive is blocked in the software You get a message that it is not permitted. Thus you loose a big adantage of the pico 6 software. The way around is to run the automotive set up in pico 6 on your 2204 once and save the settings again. Then Pico 7 on the 2204 accepts the set up. So don't discard your last versions of Pico 6 and pico6 automotive. You may need them in the future
Yes there are some clashes between the different versions. I have some issues opening old Pico6 T&M in Pico7 Automotive. I’m pretty much happy with Pico7 now apart from the crashes. Thanks for the insights!
Hi - Thanks for providing such good Picoscope content. Inspired by your videos, I thought I would have a go at using a pico 2240a to analyse the wave forms on a Bosch D Jetronic fuel injection system....which I dont think has been done before on RUclips On the 6 cylinder 280SL I am working on, the injectors fire in 2 groups of 3 (1,35 and 2,4,6). I demonstrated this with some NOID lights on my last RUclips video. I unplugged cylinder 1 and cylinder 2 and attached channel A and B of the PicoScope expecting to see two nice square wave forms illustrating the pulse sent by the 'trigger points' which live in the bottom of the distributor. NB I am measuring the signal into the injectors with all of them unplugged. The results are not at all what I expected and as you are the fountain of all knowledge, I wondered if you would have a moment to answer a couple of questions and maybe help me interpret the results? Mike in Bristol
Thanks for getting back to me so promptly. Here is a picture of the waveform: ruclips.net/video/4pLsEfULyNY/видео.html So... 1. The first thing that seemed strange, is that I had to set the time units to 200 nano seconds per division to get a decent waveform. Is that normal for fuel injectors I wonder? 2. The 2nd thing I wasn't expecting was the voltage on both channels to jump to 1.6v with the ignition key turned but not cranking. Not sure if that is usual behaviour? 3. To be able to use 'Single' trigger, I first turned ignition on (but not cranking) to eliminate that initial wave form. What I expected to get when cranking was two 'squarish' waves one peaking as the other troughed. What I got was 2 wave forms almost exactly in sync. What I am hoping for is for you to look at that waveform and say - yes that what I should expect...or say that the waveform I have captured is useless and tells us nothing useful. Mike in Bristol@@MechanicMindset
Thanks for your prompt reply. Maybe you are right! The engine runs for a short time and then dies....but maybe that is just fuel from the cold start injector being burnt. I assumed that the NOID lights firing meant the injectors would be firing, but maybe that is not the case. Maybe the scope is telling me what the problem is after all. I guess next step is to take out the injectors and see if they actually squirting fuel. Thanks for your help and if you ever need content for your channel, and want to talk to the classic car market, you know where to come. Mike
You unplugged injectors 1 and 2?The signal is 'active low' from the ecu. If the injectors are not connected the signal will appear stuck high as there is no earth path.
I get the hang of it pico 7 is more easy to use specially the dark mode its more easy on my eyes. And darren you cannot add probes uet i thi k its said its still under development. Im talking about the 2204A version. Thanks
Hi, yes you can add customs probes. You can also carry them over from saved waveforms from Pico 6. You can’t import/export yet, but using saved waveforms is just as easy
How do you handle sealing up the pierced wires on the car ? I'm in a high corrosion area, and you cant just leave sensor wiring with a hole in it from a test lead. The copper will corrode to death.
I've got 7 downloaded and looking at cam position sensor but it seems like there are things in 6 I've seen from various youtubers that I don't see in 7. Even basic things like in 6 if you record something couldn't you easily drag back and forth through the timeline with a 'drag bar'?? But I can't find anything like that in 7...looks like I have to waste screen space pulling up the zoom function to move around through everything.
In my opinion the zoom feature is much better in PS7, you can collapse the window to hide the zoom tool. Switch to the hand tool to drag around the buffer, you can also drag and expand the zoom area on the zoom tool itsel. There are a couple of things not available yet like masks, but they arent used very often. It takes some getting used to but I havent used Pico 6 for a long time now!
Hey there, I still have yet to transfer over to pico 7. Although I'm fairly new at scoping. I was hoping you can lead me in the right direction to find out what low amp clamp is compatible with 2204a please. 😊🙏
Great to have you on the channel! A Hantek CC-65 for low amp, CC-650 for higher current; good place to start. I think they’re about £50 each. I have links in the description 👍
Ah man, tell me. It did get sooo much better. I’m struggling with math channels at the minute. It just locks up 😖 Other than that. It’s way better than 6 imo
Yes. The only thing is any files saved as in pico 7 will not be able to be opened in pico 6. Although any pico 6 saved files will open in pico7 software
What oscilloscope is best to buy and where from? Iv have a awkward fault on a crank sensor and can do nothing without one, I don't know what I should be buying. Thanks Don't know if to buy a cheap one just to help me with this fault or buy a pico scope could also buy one for my Autel diagnostic tester, also do pico do a kit with leads and what I need to get started? Thanks for your help
@@MechanicMindset thanks I have used a scope before for basic sensor tests so should be fine but there's so much you can now do that I didn't realise I have my own garage and I'm struggling to diagnose certain faults so need a scope but I'd like to learn more is your training site still available
You’re right! To be honest I have been using Pico 7 Automotive which I updated over Christmas - this is what I used to make the training 👍. It will be hard to keep up to date at this stage, still quite a few features and bug fixes coming. Cheers!
@@MechanicMindset Only early access version it seems. Downloaded that version a week ago and I loved it :) I see now that Picoscope 7 is available on Picoauto though
@@MechanicMindset No I can't use Picoauto unfortunately (2204A) but as you said in a video, it's better to learn to setup timebase/voltage etc manually (one gets a deeper understanding) but what I miss is a library with reference waveforms for automotive work (that is one of the functions of Picoauto, right?)
So Picoscope 6 software is no longer supported in 2022. But the Picoscope 7 software will work with the 2204? I'm thinking investing in a 2204 shortly (is this still a good idea given the support has ended), and what software is this likely to come with, 6 or 7? And if it comes with 6, where can I download the 7 software from? The Picoscope website? Thanks
Yes, 2204A works with Pico 7 T&M. You can get it from PicoTech.com Pico 6 is still there also, it just means they are no longer updating it. And it won’t work on Windows 11
Picoscope 7 is fantastic and simple to use. So much to choose from.
Using it in anger - I hear ya' Brother!
I agree though, after you get over the trauma of changing software, it is actually easier to use. I think for us dinosaurs that have used 6 for so long, the change is a bit laborious, but for a newbie, the software would be quite user friendly.
Keep up with the great tutorials! 😀
Yeah I think it’s the change. I find the same every time windows or iOS changes. We go through the emotional change curve and the faster we can get to acceptance the better 😂Cheers!
@@MechanicMindset Too true!😆
I love Picoscopes and use them in the colleges where I teach, but as somebody who gets migraines from bright white screens, the dark mode is much welcomed.
Ah, I can see where that feature will definitely help you. Thanks for sharing 👍
Pico 7 is good and pretty easy to use. Combined with some Rotkee and Hantek kit that I saw on your channel it's very helpful
Hello and thank you for the video, for the moment I have not taken the step to upgrade to version 7
Got to give it a go Stephane! 👍
Hi, I bought the pico 2204 sometime ago and I’m sad to say that I haven’t even plugged it in yet, I just wanted to ask if the pico 7 course will show me how to use the 2204 as I can’t afford the automotive version. Kind regards, Chris.
Hi Chris, yes it will help. If you join the Diagnostic Coach monthly it has the Pico 7 Intro Course and lots more! Great value too. www.mechanicmindset.com/diagnostic-coach
@@MechanicMindset Thanks for the speedy reply.
Hi I’m a automotive tech and have a 2206b using Pico 6 can I use Pico 7 with this scope if so will I have access to wave form library , thanks
Outra parte bacana que mesmo nao tendo o Pico qualquer um pode baixar e ver como funciona !
Outra coisa sao os Tipos de Sinais que podem ser olhado no bamco de Dados. Muito bom
Good day .great channel .can I use the pico 2204 a with the pico wave forms with automotive?? Looking to buy 2204 a . Than ks as Chris
Unfortunately no, but you can see me use it on lots of automotive tests. For the price, I don’t think there is a more powerful tool anywhere
Good day . finally 2204a up and running. I did purchase your mechanic mindset course .love it . looking to find the attenuator setting for 20 to 1 . In pico 7 . Its sure fun trying to figure out lol. Cheers 🍺
You said in pin 6 14 resistance video that you can get a Pico for a £100. Whats the difference though between that and the Picoscope automotive which is not anywhere near £100. Several thousands I think.
I keep getting "NO DATA" when I trying to open picoscope 7 on windows 10 and it automatically shuts down the program. Have uninstalled, reinstalled, rebooted, downloaded latest version, tried opening it with scope hooked up and not hooked up, tried both versions of the software (stable and early access) all to no avail. Anyone else have this problem? Thank you.
Oh no! I have installed on a few devices with no issues. Have you tied contacting Pico directly; they are pretty good at getting back to you 👍
What specs is your laptop running. Got a 4425a but struggles at times and freezes with PicoScope 6 automotive and doesn’t want to know when I try pico7. Think it’s time for an upgrade.
Great content on the channel by the way.
So I did this video on a desktop, but my laptop is old but well specd (Dell Precision M3800 i7-4712HQ [Quad] 2.30GHz 15.6" 4K Touchscreen 16GB RAM NVIDIA ) I just copied the order off the email, I bought it refurbished
That being said, if I use my DSLR as a webcam at the same time as recording the screen, it was a bit slow. But on its own it’s fine.
Thanks, glad you enjoy the channel!
Hi down loaded pico 7 and had a play ,love it ,much easier to use and understand with your insight!! What amp clamp would you recommend for parasitic current draw using the picoscope 2204A scope ? Thanks
Great to hear! To get an accurate reading for battery drain test, you will have to buy and expensive clamp. Something like the TA189. You could catch vehicle wake ups with a cheaper clamp. Or use a current shunt with a math channel which is probably the most cost effective method 👍
@@MechanicMindset thanks for your help , have you covered how to do this in any of your vids
@@mattmpower5977 I’ve not got round to it yet but I have a shunt at home to use. Also have a selection of clamps. It’s on the list 👍
thank you
What is the difference between the following? And which one do you recommend please?
1. Pico Technology PP966 PicoScope 2205A-D2
2.Pico Technology PP907 PicoScope 2205A 2 Channel 25 MHz USB Oscilloscope
3. PicoScope 2204A-D2 two channel 10 MHz USB oscilloscope without probes
Off the top of my head:
2204 vs 2205 - 2205 has better sample rate. The D2 I think means it comes with leads; they are 10x type leads.
Can you create custom probes in Pico Scope 7?
Yes, in the probes menu, at the bottom. I think it says ‘add’
i love pico scope but i am living right now in Jordan for a family emergency, labor for tech is very cheap vs pico scope 7 price in most 3ed world countries so I am using pico scope 2204A thanks for the video Mate
I hope everything is ok mate. Don’t forget, you can still use Pico 7 with your 2204A! Go to PicoTech.com to download. I am using my 2204A with PicoScope 7 in this video. Check it out it’s free 👍
@@MechanicMindset thanks Mate ur the best do i have to remove the 6th ?
@@alrifainidal No, I have all 4 versions on my laptop (auto 6&7 and normal 6&7) 👍
@@MechanicMindset thanks Sir
Hello, I am writing to you from Colombia. and I need some advice, the 2204a oscilloscope is better than the 2205a and either of them can be connected with the pico scope7 software without any problem or some modification has to be done. Thank you.
Hi, 2205a is better. Both can be used with normal PicoScope 7 software (normal version) 👍
I hope this new update works with my laptop. For some reason it does not recognise 2204A on the usb.
Hey Will, does it work ok with Pico 6?
I am afraid there is a snag in moving from picoscope 6 to 7.
For tests on my classic cars i develop the set ups in pico 6 automotive demo mode and save them.
Next I can open them in the standard pico 6 software for my 2204
Running Pico 7 on the 2204 and trying to open such a setting from p6 automotive is blocked in the software
You get a message that it is not permitted.
Thus you loose a big adantage of the pico 6 software.
The way around is to run the automotive set up in pico 6 on your 2204 once and save the settings again.
Then Pico 7 on the 2204 accepts the set up.
So don't discard your last versions of Pico 6 and pico6 automotive. You may need them in the future
Yes there are some clashes between the different versions. I have some issues opening old Pico6 T&M in Pico7 Automotive. I’m pretty much happy with Pico7 now apart from the crashes. Thanks for the insights!
Hi - Thanks for providing such good Picoscope content. Inspired by your videos, I thought I would have a go at using a pico 2240a to analyse the wave forms on a Bosch D Jetronic fuel injection system....which I dont think has been done before on RUclips On the 6 cylinder 280SL I am working on, the injectors fire in 2 groups of 3 (1,35 and 2,4,6). I demonstrated this with some NOID lights on my last RUclips video. I unplugged cylinder 1 and cylinder 2 and attached channel A and B of the PicoScope expecting to see two nice square wave forms illustrating the pulse sent by the 'trigger points' which live in the bottom of the distributor. NB I am measuring the signal into the injectors with all of them unplugged. The results are not at all what I expected and as you are the fountain of all knowledge, I wondered if you would have a moment to answer a couple of questions and maybe help me interpret the results? Mike in Bristol
Hi Mike, it’s a great tool. What results did you get measuring at the injectors 1 & 2 disconnected?
Thanks for getting back to me so promptly. Here is a picture of the waveform:
ruclips.net/video/4pLsEfULyNY/видео.html
So...
1. The first thing that seemed strange, is that I had to set the time units to 200 nano seconds per division to get a decent waveform. Is that normal for fuel injectors I wonder?
2. The 2nd thing I wasn't expecting was the voltage on both channels to jump to 1.6v with the ignition key turned but not cranking. Not sure if that is usual behaviour?
3. To be able to use 'Single' trigger, I first turned ignition on (but not cranking) to eliminate that initial wave form. What I expected to get when cranking was two 'squarish' waves one peaking as the other troughed. What I got was 2 wave forms almost exactly in sync.
What I am hoping for is for you to look at that waveform and say - yes that what I should expect...or say that the waveform I have captured is useless and tells us nothing useful.
Mike in Bristol@@MechanicMindset
@@MikesMercsandothercars Looks like interference. Especially at that time base 200ns/div. Maybe it’s not firing anything g at all?
Thanks for your prompt reply. Maybe you are right! The engine runs for a short time and then dies....but maybe that is just fuel from the cold start injector being burnt. I assumed that the NOID lights firing meant the injectors would be firing, but maybe that is not the case. Maybe the scope is telling me what the problem is after all. I guess next step is to take out the injectors and see if they actually squirting fuel. Thanks for your help and if you ever need content for your channel, and want to talk to the classic car market, you know where to come. Mike
You unplugged injectors 1 and 2?The signal is 'active low' from the ecu. If the injectors are not connected the signal will appear stuck high as there is no earth path.
Great video thanks for your work excellent 👌,i need to get one that is easy to use when checking pulse on crank no,, and injectors
The 2204a is great to start with. It has limits, this is where the automotive Oscilloscope 4425a is best
Thanks excellent keep up with your great work 👌,,do ju have a price on it
2206B를 사용중인데 FFT기능이 정말 마음에 듭니다.
Great video. Just don't understand how you only have 13k subs... mind buggling!!! Pico 7 is the future, and it is good, so just adopt it and ignore 6.
We will all come round to Pico 7 eventually.
Thanks, we are steadily growing, thanks for your support! 👍
Just found out they have stopped early access 7 for 2204a??
Hi, not sure if I responded already, are you using normal Pico 7 downloaded from picotech.com?
Hello,
Where is alarm settings in picoscope 7(for ubuntu )software?
Sorry, I haven’t used the Ubuntu version. Alarms were recently released a month or so back on Windows. They’re in menu on the left side
Hi darren what about the setup probes for the hantek cc-650. Thanks
I get the hang of it pico 7 is more easy to use specially the dark mode its more easy on my eyes. And darren you cannot add probes uet i thi k its said its still under development. Im talking about the 2204A version. Thanks
Hi, yes you can add customs probes. You can also carry them over from saved waveforms from Pico 6. You can’t import/export yet, but using saved waveforms is just as easy
Thanks for sharing Darren
How do you handle sealing up the pierced wires on the car ? I'm in a high corrosion area, and you cant just leave sensor wiring with a hole in it from a test lead. The copper will corrode to death.
I don’t really pierce wires but if I have to use clear nail polish or lacquer
Google liquid tape
@@tylerboutit I have seen this; any good?
@@MechanicMindset absolutely. If you’re ever forced to pierce a wire for whatever reason that is my go to.
You DESERVE more followers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hello friend I have questions that I can use automobile software 2204A I have download other
No, go to Picotech.com and use T&M version 👍
I've got 7 downloaded and looking at cam position sensor but it seems like there are things in 6 I've seen from various youtubers that I don't see in 7. Even basic things like in 6 if you record something couldn't you easily drag back and forth through the timeline with a 'drag bar'?? But I can't find anything like that in 7...looks like I have to waste screen space pulling up the zoom function to move around through everything.
In my opinion the zoom feature is much better in PS7, you can collapse the window to hide the zoom tool. Switch to the hand tool to drag around the buffer, you can also drag and expand the zoom area on the zoom tool itsel. There are a couple of things not available yet like masks, but they arent used very often. It takes some getting used to but I havent used Pico 6 for a long time now!
I’m going to sign up tomorrow thanks
Awesome, let me know if you have any questions 👍
Hey there, I still have yet to transfer over to pico 7. Although I'm fairly new at scoping. I was hoping you can lead me in the right direction to find out what low amp clamp is compatible with 2204a please. 😊🙏
Great to have you on the channel! A Hantek CC-65 for low amp, CC-650 for higher current; good place to start. I think they’re about £50 each. I have links in the description 👍
@@MechanicMindset thank you so much, I appreciate it.
I want to use picoauto 7 with my 2204A.but i don know How can i do that... Can You help me please... I'm from Colombia 🤙
Sorry not possible
Hello. Please I need a software link pico 2204a serie 2000. Please
picotech.com
Then go to downloads
Do your updates regularly. It can get glitchy and highly annoying. Sometimes shuts right down. Do the software update, heart rate goes down.
Ah man, tell me. It did get sooo much better. I’m struggling with math channels at the minute. It just locks up 😖
Other than that. It’s way better than 6 imo
Thanks for sharing!!
I thing dark screen benefit it will save you computer battery runing time that what I think i could be wrong but that what I think
Some people really like the dark mode. But I think you are right; it’s less power. But not sure how much it will save
Hello guys can somebody help me out to clarify . Does the pico 2205a works with the pico 7 automotive software?
No it doesn’t, but you don’t need it to perform tests in cars. The scope softwares are pretty much identical 👍
It's a deal breaker that Pico haven't allowed their cheap scopes to use automotive. Hi Hantek.
I have a pico 6.can I use that one with pico 7 software?
Yes. The only thing is any files saved as in pico 7 will not be able to be opened in pico 6. Although any pico 6 saved files will open in pico7 software
@@TrevAutoTech Ypu can convert them by saving them in the latest version of Pico 6. I cover this in the training 👍
Thanks 👍
Looks good
What oscilloscope is best to buy and where from? Iv have a awkward fault on a crank sensor and can do nothing without one, I don't know what I should be buying. Thanks Don't know if to buy a cheap one just to help me with this fault or buy a pico scope could also buy one for my Autel diagnostic tester, also do pico do a kit with leads and what I need to get started? Thanks for your help
2204A great place to start! ruclips.net/video/1LBKtlpCj_4/видео.html
@@MechanicMindset hi mate iv bought the 2204a and some leads will this work with the automotive software. As just been told it wouldn't. Thanks
@@chubbychequer1512 Hi, great scope to start with. It doesn’t but don’t worry. Watch this. ruclips.net/video/QfWS05bJMWU/видео.html
@@MechanicMindset thanks I have used a scope before for basic sensor tests so should be fine but there's so much you can now do that I didn't realise I have my own garage and I'm struggling to diagnose certain faults so need a scope but I'd like to learn more is your training site still available
@@chubbychequer1512 Ah ok sorry, cool. Yeah you can check out what we’re doing at mechanicmindset.com or find us on Google 👍
The little red "4" on the top right of your screen shows you are 4 updates behind so missing some new features!
You’re right! To be honest I have been using Pico 7 Automotive which I updated over Christmas - this is what I used to make the training 👍. It will be hard to keep up to date at this stage, still quite a few features and bug fixes coming. Cheers!
Anyone knows when PicoScope 7 will be available for PC?
It’s available now mate. picotech.com if you don’t have an automotive scope 👍
@@MechanicMindset Only early access version it seems. Downloaded that version a week ago and I loved it :) I see now that Picoscope 7 is available on Picoauto though
@@MechanicMindset No I can't use Picoauto unfortunately (2204A) but as you said in a video, it's better to learn to setup timebase/voltage etc manually (one gets a deeper understanding) but what I miss is a library with reference waveforms for automotive work (that is one of the functions of Picoauto, right?)
@@HerrDagerman Yes, many do like that feature. You can install both, then use the PicoAuto for your reference/research
Hi do you know how to copy TA204 Coil on Plug setting from Pico 7 to Pico 6?
For now, you can open a saved waveform with that probe being used 👍
So Picoscope 6 software is no longer supported in 2022. But the Picoscope 7 software will work with the 2204? I'm thinking investing in a 2204 shortly (is this still a good idea given the support has ended), and what software is this likely to come with, 6 or 7? And if it comes with 6, where can I download the 7 software from? The Picoscope website? Thanks
Yes, 2204A works with Pico 7 T&M. You can get it from PicoTech.com
Pico 6 is still there also, it just means they are no longer updating it. And it won’t work on Windows 11
Hi can you send me how test coils for scope that prob like frequency
Hi, sorry, can you explain the test. Using frequency to test coils?
So I should be using pico scope 7 not pico scope automotive
They make Pico7 Automotive 👍
How much this ousloscop in 💵... please l need know.
What’s an ousloscop
The 2204A is about £100 GBP
Tem como adicionar legenda brasileira
On mechanicmindset.com we provide Spanish and Portuguese. But I am aware this isn’t Brazilian Portuguese 😬
I don't like the look and feel of 7, it reminds me of something from Microsoft Office. I'm not a fan.
I suppose inspiration has been drawn from other apps when they developed it. I didn’t like it at first but after using it, I quite like it 👍