You, Sir, are what I personally call a Gem 💎 of Pros. No voice-over, NO ANNOYINGLY POINTLESS AND BRAINLESS music, FANTASTIC video editing, not wasting anyone's time, straight to the point, shows how the utensils work... You are rare, Sir. Hats off to you!
I have a few tools made by Parkside. Never had a problem with them. I found them to be strong, robust, reliable, easy and comfortable to use and reasonably priced.
Best thing i have from Parkside is pneumatic spray gun. No one can tell my car wasn't painted by some expensive garage. Is kinda slow for everyday use but perfect quality in the end. For 10 euro :)
I bought a number of German manufactured Parkside power tools and products and so far, I'm not disappointed with the performance of any of them, especially my 80 amp inverter welder. In my opinion, they were all really good value for the money. Although It's sometimes difficult to obtain some of the larger items in local stores. Gotta get my hands on one of those plasma cutters! 👍
The hole in the root is most likely caused by your movement whilst welding, this changes the contact tip to work ratio and the welder adjusts the current depending on this. Try not moving so much and you may find better results with this welder. A root gap of that size and no bevel wouldnt really allow for much penetration either.
For those people that keep asking where they can normally buy them from is the supermarket chain Lidl, there are a number of sellers on both eBay and Amazon. Good luck 🤞
The plasma cutter surprised me, i might get one. Also cause there are a lot of different price plasma cutter and i don't understand the differences while this one can cut even 10 mm thick steel and is more than enough for me
The difference between this and lets say a 800plus $ unit? Pilot art easier to use and set up u can get consumables alot easier and faster And often different settings for cutting different things
I never bought tools of any kind from Lidl'. Now, when I see that even when those tools are not handled as a pro will do, I think that, those tools are more than good enough for home use. It looks like it. Usually, I’m very skeptical when it comes to 2-in-1 tools, not to mention 4-in-1. If in the long run, this 4-in-1 tool will function as shown, it could look, that it is a kind of winner too, for occasionally home use. Mai by more than that. Who knows. I don't know if Bosch is behind Parkside, but they look very much alike. On the distance, anyway.
I have some Bosch stuff the blue ones for pros, unfortunately for Bosch the Lidl is better I have a battery driven screwdriver/drill. I have several one is 11 years old and still works fine. Lidl is fine for people who work with it for a hobby few times in a week, not on a daily basis.
As a user of Parkside tools of many types I hesitated about the 4-in-1 as well. Bought it, used for cutting tree branches for about 45 minutes and the motor failed. Got money back from the store, then decided to buy only a single-use tool. Anyway, Parkside is definitely worth for a hobby user, good value for money.
I believe this kind of tools and machine thats very useful every thing. I hoping one day you will be maintaining the good production and high quality products. Germany made it is so good and very tested every where. Thanks for the video uploading.
A 8 mn c'est l'exemple d'une belle soudure collée . Au fil plein il faut pousser le cordon pas le tirer . Au fil fourré oui on le tire . Sinon , vidéo tres bien réalisée ;)
it is an apparatus for a maximum of 0.8 wire and up to 5mm material thickness in the mig / mag process anyway. therefore it has mma settings and cable. with mig / mag the thicker materials are stapled together and then welded fairly with the electrode.
Весьма дешевая ценовая категория у Parkside. Лучше чем голимый чайнатулз но не макита конечно). Шуруповёрты обычно вижу по €19.90 - € 29.90 . Чтобы вы имели понимание, инструмент этой марки продаётся к примеру в с.маркете Lidl (в Германии и Австрии) с 80% еды и 20% шмотья и бытовухи.
Вот тут кстати можете прицениться наряду с подобными и классом выше : www.idealo.at/preisvergleich/MainSearchProductCategory.html?q=parkside&gclid=CjwKCAiAwrf-BRA9EiwAUWwKXtR3gAnc02wyNm45RQUZ6JdO4ZdCga5lrrWFLCtmj5JntoslhnjxURoCzskQAvD_BwE
Вот лично к автору претензий нет, братуха, ты самый лучший блогер, просто молча все показал, кому надо поймут)))) красава!!!! Но сам инструмент для впечитлительных домоседов, или для диванные войск... Но объекте таким минут пять работать и выбрасывать.... Но сама подача инфы просто огонь!!!!!
На объекте работают професиионалы и зарабатывают деньги, а инструмент "Parkside" продается в разделе DIY. По этому, если кто сравнивает с проф. инструментот, то не совсем честно. А если срввнить, с моделями для дома....
Это типо как зелёный БОЩ. Инструмент доступный а запчасти дороже инструмента. И ролики на такой инструмент надо снимать хотя бы после 2-3 месяцев использования. А так из упаковки оно всё красиво.
You are probably right. A professional user like yourself wouldn't want to have it. But for an amateur like me, that holds a power drill just a couple of times a year this would work just fine. Or, if you turn it around, why would I spend a fortune for a Bosch ?
I've had a Parkside belt sander for years with occasional heavy use (and misuse) and it has served me very well indeed. You can pick up packs of sanding belts cheap in the Lidl bargain bins too if you're lucky. Dust collection isn't great but I'm not too bothered. The kiss of death on the thing right there.
@@a.a.2822 You need to adjust the little thumbscrew thing on the side, it changes the pitch of one of the rollers and should stop it sliding off. It's quite sensitive so you don't need to turn it much. I can't remember offhand though what way to turn it to get the desired effect.
I did subs....at least that i can do for you since you show me how it\s working some of the tools that i iveen hade no ideea....nice job......keep it like that .....i learn new stuffs :)
Bought the Plasma cutter and wrecked the consumables that came in the box pretty quickly which I thought at the time was my fault. After alot a research discovered you can buy a multi box from China with selection of parts that are 100% better than the originals !! I've cut coil springs and bearing races out with it "I'm a Mechanic" and it's still working perfectly. £79 for the cutter and £12 all the way from China for the tips I can't fault it :)
Ну хочешь я тебе объясню...ParkSide -это очень известная в Германии и Европе фирма по производству различного электроинструмента. В прошлом 2019 году я себе купил в Дюссельдорфе в магазине Lidl...типа нашего "Ашана" аккумуляторную дрель-шуруповёрт с Блоком питания-зарядкой + набор сверел по дереву/металлу/бетону-16 шт...за 35 €. Курс тогда правда был ~72₽.. Отличный инструмент-если будет возможность обязательно прикуплю себе ещё что-нибудь ...
Лоцман Севастопольский Вы "глупость" пишите ...причём тут вообще китайчатина.Китай в Германии проходит проверку по стандарту TUV...А электроинструменты "ParkSide" производятся именно в Германии...Если не в теме лучше "жевать",чем говорить...
@@BasylPolidouris не скажу за весь ассортимент но сварочник со 100% вероятностью произведен в Китае. Вы можете верить в сказки только других грузить не надо.
Thank you. I have very old tools from brands like Makita, Festool, Milwaukee... those are really robust and professional tools and work for 15 or more years. Only time will tell if Parkside can handle the same stress. But I think they are not designed to work all day long as the expensive brands. For the time being these Parkside tools work great. Especially the welder and plasma. I paid 200€ for the welder and it does the job done. The only thing that it lacks is wire feed speed.
@@MakeAndTest Thanks for the great reply. I think you are correct in that Parkside tools are good for basic tasks but extended use or pushing the tools to their limit for too long is not a great idea. I really liked and was surprised by the efficiency and results from the plasma and multi-welder. I got an parkside arc welder for €30 from lidl and it is not great...
@@wuddadid only this model of welder is good. Because you can weld with co2 and that is what you need. Flux core in my opinion is wasted time and money. The arc welding on this one is very good also. It can compare to my Fronous arc welder.
@@MakeAndTest That's good to hear, (decent) quality doesn't have to be very expensive. For the big brand tools you're probably paying for the brand name as well.
I run my business using these tools .Ok not Makita or De Walt but not far behind .They can last longer because no one nicks em lAnd you get a two year guarantee.
@@stefandr5252 I have a couple of their rechargeable drills, they are doing very well after at least a couple of years alongside and complimenting my Dewalt drill, I'm a carpenter/builder.
As @V Star 1300 Adventures points out below: (VS1300A appear to be from the USA, and I'm in the UK) These are found in LIDL supermarkets. They are also available via UK Amazon & UK eBay. I presume they are also available europe wide in LIDLs too - if any mainland europeans can confirm this?. Some research leads me to believe that they are rebadged tools from other manufacturers (EinHell being one of them). I have a few of their bits and bobs and they seem fine, Santa will also be bringing me a Parkside Bench Grinder and Belt Sander for Christmas 2020 - They only cost £20 each, so for an impulse buy it was a no-brainer. They may be entry-level and home diy only, but I can't say that fpr certain. They look alright and I've not seen anyone saying they are out and out bad.
Simply the absolute best brand of cheap tools, and also one of the cheapest. I use their 30$ self darkening welding helmet every day, yet the next cheapest option in the shops is.... 80$ ! Their 10$ li-ion battery garage led lamp is amazing too, glue gun, impact gun, all just miles above all the other similarly priced tools quality wise and cheaper too !
@@MakeAndTest sorry for the follow up question, but is there a minimum compressor specification required in terms of Bar or airflow that needs to be produced?
Everyone thinks they are crap tools but I have the plasma and the impact and new grinder and drill the multi battery series have come along way from where they started great vid
Nice tool for home and lite professional work, Excellent money/quality product line. I don't now haw is durability in time. I use the company's products but not long enough to give an assessment
I have a power drill it’s a little heavier than my old DeWalt but not that you’d notice. However I dropped it off the bench and the handle snapped off above the battery. It’s superglued together but weaker than it should be.
The 18V grinder is very handy not as powerful as a corded tool but really useful. However it needs the 4Ah battery. 2Ah can’t deliver the current. When cutting make sure the disc can’t get trapped. Mine now needs new power circuits because the disc trapped and overloaded it. I’m sure it’s repairable but frustrating.
Question, on MIG mode, when joining the adjacent pieces, they are rather thick and in terms of weld penetration seems to get to roughly 2/3 of the way on the 5mm metal. So presumably it would work spot on for small-ish car body patching where the metal thickness is less?
@@HoniSoitQuiMalPense If metal is over 4mm it is necessary to make little space between peaces of metal so that penetration would be full, above 5mm it is good to made V shape for weld.
They are very good. See parkside more and more on constructionsites. Went from green to black parkside, hope it will last another 3+years . Just as the green one did.
Можно больше обзоров техники PARKSIDE. Уверен, будет очень востребованный контент! Мне очень нравится: сочетание цены и качества, но профессионалы"" пафосно "топят" за бренды, хотя я уже много раз замечал, что у многих из них появились инструменты этой марки.
I wonder if except the video maker anyone on Earth would have a Fronius machine in the shop while testing Parkside welders. hahahahah 😂 2 things are worlds apart..
When you’re welding, particularly with the MIG with gas, why do you move the torch then pause (a bit like the technique for TIG), rather than moving in one continuous action?
Penetration heat, followed by filling. Avoids excessive heat build up - i have a feeling its a technique and habit from arc that creates a certain style that just looks nice lol
Just to tell you guys 90% of the tools are the same as raider exactly the same with minor differences i use a raider battery on my parkside impact wrench. For me lidl has raider making them tools.
Raider doesn't make this tools either, but yes, they are the same. Depending on the country, Maxmat has them to, slightly different looking but you can clearly see they are the same. Batteries are compatible too
I just wish Lidl made the parkside stuff available more often than they do - you have to constantly check whats going to be on sale etc, id go and buy that welder right now but it could be 11 months before they make it available etc.
Bought a Parkside impact gun battery failed after 4 months of light use, whilst tool was working i would rate it 6/10. These products dont stand test of time
@@DanielBulyovcsity i have to withdraw my comment im to blame fault with my battery was that it could not charge because to cold in garage. Now when charging battery in the house its working great so only comment i can add is that machine is slightly underpowered
Que excelente herramienta pero mejor sería que también nos dijeran también donde conseguirlas y cuál es el costo en pesos colombianos Josué peña de Ibagué Colombia.gracias
If you want to make a donation or sponsor a video, you can contact me here: sponsored.unboxing@gmail.com
8Iu90
H6
R
Fìķm
Haw much this ?
Yes I have need
Welding machine mujhe chahie
You, Sir, are what I personally call a Gem 💎 of Pros. No voice-over, NO ANNOYINGLY POINTLESS AND BRAINLESS music, FANTASTIC video editing, not wasting anyone's time, straight to the point, shows how the utensils work... You are rare, Sir. Hats off to you!
I have a few tools made by Parkside. Never had a problem with them. I found them to be strong, robust, reliable, easy and comfortable to use and reasonably priced.
Best thing i have from Parkside is pneumatic spray gun. No one can tell my car wasn't painted by some expensive garage. Is kinda slow for everyday use but perfect quality in the end. For 10 euro :)
Spray everything with that gun, second to none
Lol in sweden they took 35 euro for it
I bought a number of German manufactured Parkside power tools and products and so far, I'm not disappointed with the performance of any of them, especially my 80 amp inverter welder. In my opinion, they were all really good value for the money. Although It's sometimes difficult to obtain some of the larger items in local stores. Gotta get my hands on one of those plasma cutters! 👍
The hole in the root is most likely caused by your movement whilst welding, this changes the contact tip to work ratio and the welder adjusts the current depending on this. Try not moving so much and you may find better results with this welder. A root gap of that size and no bevel wouldnt really allow for much penetration either.
BRAVO OTTIMO lavoro 👍👍👍
What an excellent channel, direct, to the point video!
That Plasma Cutter was really good. Subscribed.
บอกโทร ราคาด้วย
@@ชัยรัตน์บุญปก about 150EUR
@@ชัยรัตน์บุญปก 99piikkkiii8oo
What is price
@@sa.roj46 about 150 eur
Desde venezuela , que herramientas tan buenas y fuertes . lastima que no llegan a venezuela .............. gracias por la demostracion .........
I love the fact that you stress tested the weld penetration. That was a nice touch.
Soooooo good, great 👍👍
Excelente video gracias amigos por compartir esas maravillosas maquinas saludos desde Colombia
Parkside has unbelievably good tools
For those people that keep asking where they can normally buy them from is the supermarket chain Lidl, there are a number of sellers on both eBay and Amazon. Good luck 🤞
Emsmwksoskekke
@@suchy19871 ..
Mmm. Mmm. ..
,
How much top 5 parkside tools?
I had a temporary replacement Parkside angle grinder after my Bosch gave up ..it worked well for nearly a year in everyday use
All my Parkside tools I bought on Lidl, are cheap and really good quality.
Totally agree.
Only the pliers are junk
@@janee7995 their paint brushes are the worse I've ever used lol. But their rechargeable drills are fantastic for the money.
@@mickk8519 yep the 20v performance is semi pro quality on a budget price.
The green ones aren't bad either, used it for 3years on constructionsites
Pas de blabla pendant une heure, que des images, qui expliquent tout : super démonstrations !
Самое главное что рассказал понятливо , всё ясно.
I got a Parkside Hammer Drill around 10 years ago and while it hasn't been used daily, it's still going strong
Love parkside tools
I'm slowly getting all the parkside tools
Nice. Good for you.
It. Is. Good. Tules
@@patelramanbhai1428 No, this is piece of junk.
So do I I've got a few good price fairly accurate and you can abuse the life out of them 18v circular saw is a cracking piece of kit
Who sells them,I've never heard of them
Bonjour.
Merci pour cette super vidéo qui n'est pas parasitée par une musique saoulante ou des commentaires inutiles.
The plasma cutter surprised me, i might get one. Also cause there are a lot of different price plasma cutter and i don't understand the differences while this one can cut even 10 mm thick steel and is more than enough for me
The difference between this and lets say a 800plus $ unit? Pilot art easier to use and set up u can get consumables alot easier and faster
And often different settings for cutting different things
@@STOkitten but depends on the use you need it, i keep it on just for 5 minutes a day, i don't need to cut a lot of steel
@@Gabrulo_knifemaking u were asking about price and difference between plasma cutters
Sooo i let u know
Lidl je prostě SUPER.
I never bought tools of any kind from Lidl'. Now, when I see that even when those tools are not handled as a pro will do, I think that, those tools are more than good enough for home use. It looks like it. Usually, I’m very skeptical when it comes to 2-in-1 tools, not to mention 4-in-1. If in the long run, this 4-in-1 tool will function as shown, it could look, that it is a kind of winner too, for occasionally home use. Mai by more than that. Who knows. I don't know if Bosch is behind Parkside, but they look very much alike. On the distance, anyway.
D
I have some Bosch stuff the blue ones for pros, unfortunately for Bosch the Lidl is better I have a battery driven screwdriver/drill. I have several one is 11 years old and still works fine. Lidl is fine for people who work with it for a hobby few times in a week, not on a daily basis.
As a user of Parkside tools of many types I hesitated about the 4-in-1 as well. Bought it, used for cutting tree branches for about 45 minutes and the motor failed. Got money back from the store, then decided to buy only a single-use tool. Anyway, Parkside is definitely worth for a hobby user, good value for money.
I believe this kind of tools and machine thats very useful every thing.
I hoping one day you will be maintaining the good production and high quality products.
Germany made it is so good and very tested every where.
Thanks for the video uploading.
A 8 mn c'est l'exemple d'une belle soudure collée . Au fil plein il faut pousser le cordon pas le tirer . Au fil fourré oui on le tire .
Sinon , vidéo tres bien réalisée ;)
I bought the multi welder. Great bang for the buck.
@7:57 Absolutely perfect chinese weld
it is an apparatus for a maximum of 0.8 wire and up to 5mm material thickness in the mig / mag process anyway. therefore it has mma settings and cable. with mig / mag the thicker materials are stapled together and then welded fairly with the electrode.
Wow… how much plasma cutter & welding machine as well as cordless combination tool…. I love these tools…
Are you willing to buy the machine if yes where do you want it to be delivered to we sell it
stephen triple zero six three one
At gmail
Сварка и резка понятно, не знаю зачем но мне нужен этот инструмент 👍😃🤷♂️ Сколько же он стоит интересно?
Весьма дешевая ценовая категория у Parkside. Лучше чем голимый чайнатулз но не макита конечно). Шуруповёрты обычно вижу по €19.90 - € 29.90 . Чтобы вы имели понимание, инструмент этой марки продаётся к примеру в с.маркете Lidl (в Германии и Австрии) с 80% еды и 20% шмотья и бытовухи.
Вот тут кстати можете прицениться наряду с подобными и классом выше : www.idealo.at/preisvergleich/MainSearchProductCategory.html?q=parkside&gclid=CjwKCAiAwrf-BRA9EiwAUWwKXtR3gAnc02wyNm45RQUZ6JdO4ZdCga5lrrWFLCtmj5JntoslhnjxURoCzskQAvD_BwE
Вот лично к автору претензий нет, братуха, ты самый лучший блогер, просто молча все показал, кому надо поймут)))) красава!!!!
Но сам инструмент для впечитлительных домоседов, или для диванные войск...
Но объекте таким минут пять работать и выбрасывать....
Но сама подача инфы просто огонь!!!!!
На объекте работают професиионалы и зарабатывают деньги, а инструмент "Parkside" продается в разделе DIY. По этому, если кто сравнивает с проф. инструментот, то не совсем честно. А если срввнить, с моделями для дома....
Это типо как зелёный БОЩ. Инструмент доступный а запчасти дороже инструмента. И ролики на такой инструмент надо снимать хотя бы после 2-3 месяцев использования. А так из упаковки оно всё красиво.
ПРАВИЛЬНО ЗАМЕТИЛИ..
You are probably right. A professional user like yourself wouldn't want to have it. But for an amateur like me, that holds a power drill just a couple of times a year this would work just fine. Or, if you turn it around, why would I spend a fortune for a Bosch ?
Ета хрень даже и из упаковки не красива глянув би ти на етот мусор в рели
I've had a Parkside belt sander for years with occasional heavy use (and misuse) and it has served me very well indeed. You can pick up packs of sanding belts cheap in the Lidl bargain bins too if you're lucky. Dust collection isn't great but I'm not too bothered. The kiss of death on the thing right there.
I have a parkside belt sander aswell but the belt keeps coming off after 1 press of the trigger
@@a.a.2822 You need to adjust the little thumbscrew thing on the side, it changes the pitch of one of the rollers and should stop it sliding off. It's quite sensitive so you don't need to turn it much. I can't remember offhand though what way to turn it to get the desired effect.
Переведи на казақски язык
Magnífico 👏👏👏👏
Parabéns!
*_Всех, с наступающим Новым Годом!!! Привет из Донецка!!!_* 😊😊😊😊😊😊😊😊
I did subs....at least that i can do for you since you show me how it\s working some of the tools that i iveen hade no ideea....nice job......keep it like that .....i learn new stuffs :)
I find these a Lidl's grocery store. I haven't been disappointed yet in picking one up when I found it.
thank you for the video, always success
0
The welder did well I’m surprised may workout just fine for my hobby welding jobs thanks man
Sieht ganz gut aus !!👍👍
Ich meine die Schweißtechnik..
Akkubohrer hatte ich nicht gekauft..
น
Show !!!!!🔥🔥🔥🔥🚀🚀🚀
참으로 탐나내요
요즘 용접기 고민중인데
플라즈마절단기랑
꼭 준비하고싶내요
💯💯💯💯
Bought the Plasma cutter and wrecked the consumables that came in the box pretty quickly which I thought at the time was my fault. After alot a research discovered you can buy a multi box from China with selection of parts that are 100% better than the originals !! I've cut coil springs and bearing races out with it "I'm a Mechanic" and it's still working perfectly. £79 for the cutter and £12 all the way from China for the tips I can't fault it :)
Понравилось как он словами всё объяснял.
Красноречивый Герасим
Ну хочешь я тебе объясню...ParkSide -это очень известная в Германии и Европе фирма по производству различного электроинструмента. В прошлом 2019 году я себе купил в Дюссельдорфе в магазине Lidl...типа нашего "Ашана" аккумуляторную дрель-шуруповёрт с Блоком питания-зарядкой + набор сверел по дереву/металлу/бетону-16 шт...за 35 €. Курс тогда правда был ~72₽.. Отличный инструмент-если будет возможность обязательно прикуплю себе ещё что-нибудь ...
@@BasylPolidouris Это как «российский » Зубр или «польский» TOMPEX абсолютно очевидно что это китайские изделия в чистом виде.
Лоцман Севастопольский Вы "глупость" пишите ...причём тут вообще китайчатина.Китай в Германии проходит проверку по стандарту TUV...А электроинструменты "ParkSide" производятся именно в Германии...Если не в теме лучше "жевать",чем говорить...
@@BasylPolidouris не скажу за весь ассортимент но сварочник со 100% вероятностью произведен в Китае. Вы можете верить в сказки только других грузить не надо.
عالی وبی نظیر بودن همه این ابزار OK
Absolutely excellently filmed and edited video. How do these tools compare to other more expensive brands?
I've got loads of lidl brand power tools, absolutely no problem with them at all
Thank you. I have very old tools from brands like Makita, Festool, Milwaukee... those are really robust and professional tools and work for 15 or more years. Only time will tell if Parkside can handle the same stress. But I think they are not designed to work all day long as the expensive brands. For the time being these Parkside tools work great. Especially the welder and plasma. I paid 200€ for the welder and it does the job done. The only thing that it lacks is wire feed speed.
@@MakeAndTest Thanks for the great reply. I think you are correct in that Parkside tools are good for basic tasks but extended use or pushing the tools to their limit for too long is not a great idea. I really liked and was surprised by the efficiency and results from the plasma and multi-welder. I got an parkside arc welder for €30 from lidl and it is not great...
@@wuddadid only this model of welder is good. Because you can weld with co2 and that is what you need. Flux core in my opinion is wasted time and money. The arc welding on this one is very good also. It can compare to my Fronous arc welder.
@@MakeAndTest You want to say "FRONIUS"!
Good stuff!
Glad you enjoyed it
Хорошие тесты, спасибо!
Гавно полное
@@СЕРГЕЙГ-щ4ъ А какое хорошее, чью фирму посоветуете.
@@СергейФедосеев-л6ф за эти деньги стоит брать.
I am so shocked how good that welder is! Great video!
I have it it's en nice geap welder flux elektro tig mig end aluminium work fine
Now do these tests again after a year... there's a reason behind low prices. Maybe good enough for in the household, not too bad at first glance
I have them for almost half a year and they all work to this day.
@@MakeAndTest That's good to hear, (decent) quality doesn't have to be very expensive. For the big brand tools you're probably paying for the brand name as well.
I run my business using these tools .Ok not Makita or De Walt but not far behind .They can last longer because no one nicks em lAnd you get a two year guarantee.
@@stefandr5252 I have a couple of their rechargeable drills, they are doing very well after at least a couple of years alongside and complimenting my Dewalt drill, I'm a carpenter/builder.
Very nice tools
Como eu posso comprar esses equipamentos?
Try bending to the back side of the weld
As metal is hard we need strength on both sides but still like all Parkside products
Muy buenas herramienta
@@irraelsantana5185 sasa
Esta disponibles aqui en mexico
Не думал что есть полуавтоматическая сварка без кислодного баллона. Круто!
Thanks...wow for the hacksaw 😲👍🏻
Very nice
have a nice day and god bless your prayer.good luck friend 👍👍👍👍 Well done for you no. . .
Brapaan harganya??
اجمل ماكينة لحام وعملية جدا
Удачи вам спасибо я из Узбекистан как можно купит апарт такои.унас ест ихтни делигати спасибо и о,👍👍👍👍👍шорас ответ ?????
As @V Star 1300 Adventures points out below: (VS1300A appear to be from the USA, and I'm in the UK) These are found in LIDL supermarkets. They are also available via UK Amazon & UK eBay. I presume they are also available europe wide in LIDLs too - if any mainland europeans can confirm this?.
Some research leads me to believe that they are rebadged tools from other manufacturers (EinHell being one of them). I have a few of their bits and bobs and they seem fine, Santa will also be bringing me a Parkside Bench Grinder and Belt Sander for Christmas 2020 - They only cost £20 each, so for an impulse buy it was a no-brainer. They may be entry-level and home diy only, but I can't say that fpr certain. They look alright and I've not seen anyone saying they are out and out bad.
i have few tools of parkside and i like hit very match nice and easy in yues
Simply the absolute best brand of cheap tools, and also one of the cheapest. I use their 30$ self darkening welding helmet every day, yet the next cheapest option in the shops is.... 80$ !
Their 10$ li-ion battery garage led lamp is amazing too, glue gun, impact gun, all just miles above all the other similarly priced tools quality wise and cheaper too !
Excellente vidéo parfaitement filmée sans branlette inutile ni blabla 👏 je m'abonnes !
Я работаю с полуавтоматом, уже 7 лет. И такой фигни я еще не видел.
))))
А в чём фигня?
@@kostyuha фигня то что у него подача прогулку больше а ток меньше сначала надо нормально настроить а потом варить он явно не сварщик
@@МаксимПономарев-ж6ч мой совет НЕХУЙ брать
пАтАму шта ты ТАНЯ !!!
good job LIDL
I am new to this : do you need an air compressor for the plasma cutter , the video didn't show what you connected the two cables to . Thanks
Yes. Just an air compressor.
Xin giá
@@MakeAndTest sorry for the follow up question, but is there a minimum compressor specification required in terms of Bar or airflow that needs to be produced?
@@GenisSan72 Can't say about minimum, but the maximum is 3 Bar
Everyone thinks they are crap tools but I have the plasma and the impact and new grinder and drill the multi battery series have come along way from where they started great vid
Nice tool for home and lite professional work, Excellent money/quality product line. I don't now haw is durability in time. I use the company's products but not long enough to give an assessment
I have a power drill it’s a little heavier than my old DeWalt but not that you’d notice. However I dropped it off the bench and the handle snapped off above the battery. It’s superglued together but weaker than it should be.
The 18V grinder is very handy not as powerful as a corded tool but really useful. However it needs the 4Ah battery. 2Ah can’t deliver the current. When cutting make sure the disc can’t get trapped. Mine now needs new power circuits because the disc trapped and overloaded it. I’m sure it’s repairable but frustrating.
Question, on MIG mode, when joining the adjacent pieces, they are rather thick and in terms of weld penetration seems to get to roughly 2/3 of the way on the 5mm metal. So presumably it would work spot on for small-ish car body patching where the metal thickness is less?
@@HoniSoitQuiMalPense If metal is over 4mm it is necessary to make little space between peaces of metal so that penetration would be full, above 5mm it is good to made V shape for weld.
I had never trust parkside but now i think their start making good quality products. Thanks for the sharing.
They aren't good quality at all but decent and suitable for DIY
They are very good.
See parkside more and more on constructionsites.
Went from green to black parkside, hope it will last another 3+years .
Just as the green one did.
@@janee7995 price vs. durability, Makita Is still the best. Haven't seen anybody using Parkside on site
@@ondrejkluc8760 don't like makita.
Hilti, Bosch, Milwaukee
And for semi pro : parkside
Будто цигани у порога показывают свой новый тренд " Смотри че могу"
Что это он накапал с пипетки для определения повара? Никак масло? Или ед
Кислота
வெல்டிங்மிசின்என்னாவெலை
Very nice video
Am I right in thinking those welds are very good?
Not actually. I'm an amateur welder.
The welds would cause me no concern at all in my workshop 👍👍
They would pass my tests friend, and I am fussy.
@@evelghostrider Thanks, I would not know if the welder could make good welds by looking.
I'm gonna pick one up the next time they are in lidl.
Wow good..
Отличный набор цена сколько стоит.
Con esas herramientas. Se tiene un taller de primera..saludos buenísimas todas...hay q tenerlas....se hace bastante..y trabajos finos ..saludos
Я в восторге. Где заказать и цена!!!?
ГДЕ ЗАКАЗАТ И ЦЕНА СКОЛКО
Тобі немає куди грошей викинуть?
Можно больше обзоров техники PARKSIDE.
Уверен, будет очень востребованный контент!
Мне очень нравится: сочетание цены и качества, но профессионалы"" пафосно "топят" за бренды, хотя я уже много раз замечал, что у многих из них появились инструменты этой марки.
Amazing Tool's
Which country are these from?
‼️ TOP ‼️ 👍👍👍
Can this open safes safely and quietly?
I wonder if except the video maker anyone on Earth would have a Fronius machine in the shop while testing Parkside welders. hahahahah 😂 2 things are worlds apart..
Wow nice review.
Eskimo price kyanite hay
Eskimo price kyanite hay
I've started buying this stuff from lidl's in the UK when it comes up.. fantastic kit, nice to see some kit I haven't got being unboxed
باسلام
به چه طریق می شود خریداری کرد..سپاس
When you’re welding, particularly with the MIG with gas, why do you move the torch then pause (a bit like the technique for TIG), rather than moving in one continuous action?
that's tha way if you want to penetrate the material and have a great welding, with any kind of welding, voltaic, tig or mig.
Penetration heat, followed by filling. Avoids excessive heat build up - i have a feeling its a technique and habit from arc that creates a certain style that just looks nice lol
I like your tools please send me the price.
Good welder machines
Just to tell you guys 90% of the tools are the same as raider exactly the same with minor differences i use a raider battery on my parkside impact wrench. For me lidl has raider making them tools.
Good info. Thank you for sharing :)
Raider doesn't make this tools either, but yes, they are the same.
Depending on the country, Maxmat has them to, slightly different looking but you can clearly see they are the same. Batteries are compatible too
هل ليدي هذا شركه ام محل
I just wish Lidl made the parkside stuff available more often than they do - you have to constantly check whats going to be on sale etc, id go and buy that welder right now but it could be 11 months before they make it available etc.
We got this welder only once in 2 years in Slovenia. You can somehow buy it online if you are from Germany.
@@MakeAndTest exactly its not often enough
Отлйчно👍 а Сколка стоеть ?
Отличник инструменты сколько стоит скажите пажалуста
Amazing tools 👍👍👍👍👍👍
They are being sold in South Africa under the name AC/DC tools...
Bought a Parkside impact gun battery failed after 4 months of light use, whilst tool was working i would rate it 6/10. These products dont stand test of time
You have 3 years warranty on all tools if you buy it without invoice
Ohh really gott look into that
@@DanielBulyovcsity i have to withdraw my comment im to blame fault with my battery was that it could not charge because to cold in garage. Now when charging battery in the house its working great so only comment i can add is that machine is slightly underpowered
Que excelente herramienta pero mejor sería que también nos dijeran también donde conseguirlas y cuál es el costo en pesos colombianos Josué peña de Ibagué Colombia.gracias
LIDL Alemania.
Ahí las venden, en Lidl
👏🏻👏🏻 algo más que sabemos 👍🏻
Надо было написать ценники, тогда обзор был бы полнее!!!
kitani prise hai es machin ki
125,75 евро в Lidl стоит
@@19828443 А где можно купить эти инструменты?
только это нашел в интернете для России,я сам в Германии живу
Это если повезёт вед не всегда они там в Lidl. Но инструменти в Lidl долговечные
Meilleurs chaine de présentation parkside 👍👍👍
Сколько стоит такие аппараты?.
Los equipos y las herramientas de la marca Parkside por las presentaciones y los vídeos se ven de excelente calidad
Vc teria um valor para essa máquina de solda
👌👍👍👍 nice & usefull tools.
Parkside tools are good but if they can invent craft tools like a miniature sawbench
Genial saludos cordiales desde Patagonia Chile