Using G71 and G70 On A Fanuc CNC Lathe
HTML-код
- Опубликовано: 17 окт 2024
- This video explains the use of G71 and G70, roughing and finishing cycles on a Fanuc or Haas control. It demontrates the one line G71 as used on the Haas CNC Lathes and the two line G71 used on Fanuc controls.
www.cnctraining...
How to use Haas, Fanuc, Mazak G71/G70 rough and finish cycle. Used in Fanuc Programming and Haas Programming this video explains how to use the G71 canned cycle. The G71 canned cycle is for roughing and the G70 canned cycle is for finishing. If you are learning cnc programming or you need more detailed help with G71/G70 then this CNC Training Tutorial video is for you.
On a CNC Lathe the G70/G71 is a quick way to rough out a shape that would otherwise be quite difficult to break down into small cuts. This is all part of understanding G codes.
RUclips channel: / @cnctrainingcentre603
Visit my website www.cnctrainin... if you want to learn CNC Programming. The CNC Training Centre teaches Fanuc Programming and Haas Programming.
We have CNC Classroom Training for Mazak programming.
Come to us to learn G code programming. On the website there is loads of G code programming help and support. Learn CNC Programming from tutorial videos with free CNC tips and tricks.
Specialists in CNC Training.
Watch these free CNC tutorial videos:
Basic Position display Fanuc (Using the Fanuc Control)
• Do You Understand your...
Copy and Paste Fanuc 18i (Help with Fanuc Control CNC Programming Tips and tricks)
• Video
How to use G98 and G99 (G code programming Tutorial Video)
• (1) CNC Program Basics...
Using sub programmes (Haas Sub programmes, Fanuc sub programmes)
• Video
G96 and G97 (Turning G Codes)
• Video
Tool nose radius compensation (Learn CNC Turning)
• Video
Using G71 and G70 (Help with CNC Turning)
• (5) CNC Program Basics...
Cutter compensation (Help with CNC Milling)
• Do You Know How to Use...
CNC Tips n Tricks Video
• CNC Tip (1) Never Cloc...
Is G70, G71 and/or G72 on Mazak lathe controls too?
Yes when you use the ISO option it all works the same on a Mazak
@@cnctrainingcentre603 cool thanks!
Where would you put in your G42?
On most fanuc controls you can't put it in the G71 you have to add it before you go back in and use G70
Great upload!
Thanks great to hear