bro that is not grease, thats alcohol.. its easier to pull the handgrips into place with alcohol, once the alcohol dried, the grips will stay in place..
I just came across your channel in my feed. Awesome build! I can't wait to hear how it does on the trails. I like that you focus on budget minded parts and builds.
Forgive me if I'm wrong but it is possible you have play in your headset. You measured your steerer tube to be at the same level as your headset spacers. Your tube should be about 2 mm shorter so you can tighten your headset bearings.
Galing erp! Watched your vids from the time na ang set up mo e kalikot with a rear wheel bike stand lang and some tools, then now kumpleto na sa gamit. Kudos! 🍻
Would be epic if u putted fox fork and dropper with kashima coating and the shock too so it ´d be like a Trifox ya know. I ´d also put for background nice anodized colored bits like red, orange, green or blue .etc. But anyways nice build man.
took me ten minutes to find out it cost him less than $1000 and weights 28.7 lbs. would it have killed you to say/put that in the video or description? lol.
At 7:50...are those scratches on the bars , right side. And are those just slide on grips, no screws...and it was going so good..ok...you made up for the grips when you used the heat shrink...I think, I'll have to try it..over all...I like it. I think I'll purchase one and see.
If I would imagine starting a RUclips channel with bike stuff (as I do everyday), I would do it exactly like you did in your videos (except I would put the grease to the inner side of the seat tube, not to the seatpost :D ). Really proud of you dude, keep it up! Thanks for your content.
Sweet looking stealth build. I personally would have gone w a Fox fork and dropper to complete the "Trifox" name. Please post a review video with some shredding and light jumping (typical use). I wouldn't be surprised if this frame came out of the same plant that makes frames for several known brands using the same materials and layup process.
I’ve never watched a complete assembly like this, pretty cool. Really good job making the video. I apologize for my ignorance, but why grease the bars? Last question .... why was the rear shock installed inverted? Again, great job making the video!
Thanks for asking, The grease on the bars is just a troll, shocks can be installed upside down some are parallel, if you pay attention, there’s is no way to install the shock upright, attention to details that’s the key
@@MCMTB trolling people in your video....just awesome!! Thank you for such a quick response. I will go back and watch it again for the rear shock. I assumed it was a “has to be” situation, but I’ve never built a mountain bike, so I have no experience...probably why I did not pick up on the only way it would fit, but I was pretty fixated on the shock being inverted lol. Your video caught my eye due to being interested in building a Chinese CF frame MB...I was not only pleasantly surprised by the quality of the video, but also the assembly process you went through and your technique. Very very cool. Thanks again for the reply and I hope you have a outstanding week.
@@erikeng6592 I know how to install grips. I use air or alcohol, times I have used hair spray in a pinch. Hand sanitizer is a little expensive for that and I can do without fragrance. Besides, I do not have HS readily available where as I do have rubbing alcohol in my med cabinet.
Lupet ma magbuo ni erp. Pero mas malupet ang cameraman 😂
Lol thanks, napaka hirap pala netong bike build video na ganto,
gawan mo review sir ian AHAHA.
@@MCMTB Wacthing this video is just so satisfying kasi po HAHA. napaka relaxing ng background music then all was precise. thumbs up!
Naka tulog ako while editing dahil sa Music ☺️
@@MCMTB naantok na nga ako eh hahaha ganda ng bike mo, one day, magiging big time bike vlogger ka din
This is pretty epic! Can't wait to see you ride it and tell us how it is.
Man this is therapeutic to watch cuz of that binaural beats background music.
Edit: and of course cuz of Mark's mechanic skills.
Someone has been watching a bit of Gee Milner
Lol true
Ako
Love the lack of chit chat! Most of us know what parts you’re working with. Excellent video!
17 minutes and none a single word came out. Y'all know he's in serious business.
I knew he was serious when he cracked open a cold one lol
You never watch other bike canal ???? the most youtubers did it !!!!!!!!!!!!!!!
Gee Milner from aliexpress 😂😂
Its just a joke no offence hi from Bosnia
Lol I actually thought it's funny ☺️🤣
lol XD
@@hamidsuljic7389 reci mu Hamide. By the way, realy nice bike build.
Cycle Man ma nevalja brate nista ovo sto je uradio😂😂
This is the best video you've done so far. No words, right down the business....love the thunder storm in the background....
minamahal ang build na ito. hindi maghintay upang makita ang pagsusuri 👍
Your channel has came a long way! Keep it up man, builds are so much better than unboxing.
Man even the zip ties were torqued to spec 😬 sweet build!!
LoL🤣
Video quality seems to get better with each upload. Good work man
out of all the Pinoy RUclipsrs so far you are the best builder!
Thanks
Shrink tube for a cable end-brilliant, thanks!
5:15 Grease the handlebars so that they rotate better.
Grease your brain so it’ll think better. Why won’t you just APPRECIATE?
@@kenjorielenterina7657 LOL
bro that is not grease, thats alcohol.. its easier to pull the handgrips into place with alcohol, once the alcohol dried, the grips will stay in place..
@@sop953 he's talking about when he greased the handlebars
Yeah, I also don't understand why... I know they put grip paste when working with carbon but this makes no sense
Sa wakas..the long wait is over. ang angas boss mark...sunod nman n aabangan ko yung test ride. stay safe idol.
Rave day ko today, ma tetezting kung malupit nga ba :), thanks🤙
Oh my God... wow bro.... watching this was just..... a thing of beauty....
I always watch Gee Milner's dream builds on 1.5-2x speed. But this... I'm watching it on 1.0x.
Thanx for sharing!
Just a tip, but I like to use a soft thin skinny stick instead of a finger to apply grease.
Gee Milner called and he wants his video back 😂
I just came across your channel in my feed. Awesome build! I can't wait to hear how it does on the trails. I like that you focus on budget minded parts and builds.
Is this an ASMR for bike building? 😂👍
U really can use it for that😂
The bike turned out really, really nice.
The silent video was fantastic too.
Looking forward to your first riding video.
Forgive me if I'm wrong but it is possible you have play in your headset. You measured your steerer tube to be at the same level as your headset spacers. Your tube should be about 2 mm shorter so you can tighten your headset bearings.
Bumubuo ka na pala ng bike bro.. Tagal ko din inabangan vid mo..pogi ng bike,, sana all.. Ako hanggang pangarap nlamg magkaroon ng ganyan..wew
Nice.. Dream Build style video. Level up ka na talaga erp.
Great, Build. It was cool meeting you at the race Sunday as you got to put the bike in action. I'm the guy with the Tallboy
Yeeh yeeh, Your tall boy looks sick, dream bike for sure
Galing erp! Watched your vids from the time na ang set up mo e kalikot with a rear wheel bike stand lang and some tools, then now kumpleto na sa gamit. Kudos! 🍻
ang satisfying pakinggan ng BG music habang nagbi-build ng bike.
Would be epic if u putted fox fork and dropper with kashima coating and the shock too so it ´d be like a Trifox ya know. I ´d also put for background nice anodized colored bits like red, orange, green or blue .etc. But anyways nice build man.
Ang bangis at alam ko magkakaganyang build din ako. Dream build ko. Ride safe idol!
took me ten minutes to find out it cost him less than $1000 and weights 28.7 lbs. would it have killed you to say/put that in the video or description? lol.
I always dig that Natty Light touch. Great build, great vid!
Watching you build a bike, while I build IKEA furniture! Sucks, I want a bike to!
Serious Epic, Awesome MTB Build Erp....
We need a long term testing and review alá Trace Velo. That’s the only way to know if a cheap carbon MTB build is even worth it.
The frame is $1000 so not really cheap.
A list of components, source(s), and prices would have been nice to see.
Love this! I was late for work because I got stuck watching this video in bed.
Been waiting for this! Keep it up Sir!
Your BEST video to date great Job
Building bike video with pads synths background. It’s like mountain and coffee together ❤️❤️❤️ nice video erp! Keep it up!
Awesome build man! And the video editing was dope. Great job!
Thanks
Yun oh buo na! Lupet ng mga angulo cinematic datingan erp.. ride safe
Petmalu AyDuL🤘
Best video u have made 🔥 🔥 🔥
At 7:50...are those scratches on the bars , right side. And are those just slide on grips, no screws...and it was going so good..ok...you made up for the grips when you used the heat shrink...I think, I'll have to try it..over all...I like it. I think I'll purchase one and see.
If I would imagine starting a RUclips channel with bike stuff (as I do everyday), I would do it exactly like you did in your videos (except I would put the grease to the inner side of the seat tube, not to the seatpost :D ). Really proud of you dude, keep it up! Thanks for your content.
Thanks for the tip
Badass build
Thanks
Someone has been watching Old Shovel videos. 😁I love this stuff.
That’s gonna be me one day soon , gonna build my next one from the ground up. Very cool
Let me know when you finished the build
Amazing video as always.
It was fun watching this build. Good work my dude.
Good job on the video man! I can't wait until my bike is here in November! Much love from Pensacola!
Good stuff man, keep me posted,
I used to ride the games loop trail
Not sure if you've ridden the Muskogee trails over here, but they are definitely different than the UWF trails and more about MTB.
Never been there, I might go one day 🤘
Should be a good trip after getting the new Trifox broken in!
Yeeh yeeh,
The bike looks very light, love that Box Two components, very strong tough drive terrain ever👍👍👍👍👍
Box two is solid dude
@@MCMTB 💯agree, tested, im a heavy rider, no problem for 2 years now, good choice.
Absolutely amazing video.... This is perfect for people like me, who aspire to build their own bike one of these days...
The Frame is almost identical to a Scott Spark frame except for a couple small differences!
Yes it is very similar
Can you post the links to where you got the carbon mtb?
Ebay carbon fiber mountain bike frame and you will see it. Roughly $350 a pop
Nice build, great vid... you look much more confident with this build.
I thought u mounted the back suspension upside down 🙃 but I'm not sure if it's right 🤔
Yeah manitou are weird like that, it lets them use less material but keep the same structural integrity as a normal fork
@@MCMTB was does that have to do with a fox shock? what does fox say when you mount it upside down?
@@mcduffrobert its a trunion mount from the bottom. its supposed to be that way.
Carbon BIKE is real erp ❤️ na master mo na din mag build kakamiss si orange
Pra akong nanuod ng dream builds...its looks really nice too...
Thanks Homie
Why did you put the rear shock upside down?
Why did you grease the handlebars?
Watch the whole video. Now i wish i have this same assembly video. Awesomely done idol. 🤩🤩🤩
Dream build-esque vibe. Very nice erp!
Finally.. been waiting for this video for so long .. thanks 🤩
Pang pro ang bike build mo erp salute!!!
Nice and clean build!
Follow up on this bike??? Is this still good???
Trifox lo está petando, tiene muy buena pinta ese cuadro y gran montaje.
oddly satisfying to watch
Awesome vid. Don't usually comment but had to here. Great build, keep up the content.
Thanks homie
so satisfying😍😍 sarap sa mata and ears
👌💪I keep coming back to watch this video..
Yaaan gusto ko yung nagbukas ng beer. Napakuha din tuloy ako ng beer. hahaha
Awesome build. But may I ask why u use only 160mm rotos?
Good job! I would like see more videos about this bike. Its sound a good option to build a bike.
Ride test agad erp😛balagbag mo kagad sa trails..nice touch!
Niiiiice. Just so you know the KS dropper single bolt seat clamp can be a bit mean toward your saddle rails (I have one).
Napaka angas erp!
This is the ASMR of the mtb world 😂😂
is this frame based on the Scott Spark? It looks similar.
Solid idol satisfying masyado yung build mo. Busog na mga mata ko 😍
Nice video quality and nice build. Don’t listen to the ignorant haters. All carbon bikes are made in China.
Sweet looking stealth build. I personally would have gone w a Fox fork and dropper to complete the "Trifox" name. Please post a review video with some shredding and light jumping (typical use). I wouldn't be surprised if this frame came out of the same plant that makes frames for several known brands using the same materials and layup process.
Nice Vedeo men, now you need to ride the bike and reviewing how it does it feels
I mean, this is pretty cinematic!
Thanks 😊
Dude great video and the bike looks amazing bro
So clean man!
The Black Beauty is born
Bulaga! So serious nmn!.
Wow dream build. Sana all specifically the tools...
More power
Be safe.
Savage, was So l👀king forward to watching this🤘
When is the review gonna come out
Nice job and great looking rig!
Majestic my brother!
Been watching some Gee Milner lately? Lol great video, love these budget build videos!
I’ve never watched a complete assembly like this, pretty cool. Really good job making the video. I apologize for my ignorance, but why grease the bars? Last question .... why was the rear shock installed inverted?
Again, great job making the video!
Thanks for asking, The grease on the bars is just a troll, shocks can be installed upside down some are parallel, if you pay attention, there’s is no way to install the shock upright, attention to details that’s the key
@@MCMTB trolling people in your video....just awesome!! Thank you for such a quick response. I will go back and watch it again for the rear shock. I assumed it was a “has to be” situation, but I’ve never built a mountain bike, so I have no experience...probably why I did not pick up on the only way it would fit, but I was pretty fixated on the shock being inverted lol. Your video caught my eye due to being interested in building a Chinese CF frame MB...I was not only pleasantly surprised by the quality of the video, but also the assembly process you went through and your technique. Very very cool.
Thanks again for the reply and I hope you have a outstanding week.
@@Todd66 handsanitizer is a great way to get bars on. Afterwards it evaporates.
@@erikeng6592 I know how to install grips. I use air or alcohol, times I have used hair spray in a pinch. Hand sanitizer is a little expensive for that and I can do without fragrance. Besides, I do not have HS readily available where as I do have rubbing alcohol in my med cabinet.
Yan Ang Pinoy kinakamay Ang grasa. ganda idol.💪
Palaman sa monay Erp 🤘
My only question why the forms backwards?
It’s not backwards, do your research
@@MCMTB realised it's after searching a bit I liked the forks my apologies kind sir
✌️🤌🏻
Great video brother! Magaling din yung cameraman!
Wow my ears are stimulated after this video
Has it broken yet?
Ganda Erp! Gee Milner na Gee Milner ang datingan.!
eto na yung hinihintay kong video hehehe... nice one build erp...
Looks good. What is the completed weight please?