Across DVS and needleless scratching, full rekordbox and Serato integration, and nearly endless MIDI, mechanical, and digital performance flexibility, the PLX-CRSS12 is an unrelenting force of turntablism that’s equally powerful in hands of new- and old-school DJs. Which features are you most looking forward to taking for a spin? Sound off in the comments, and head over to Sweetwater for an in-depth look at Pioneer DJ’s PLX-CRSS12 hybrid direct drive turntable 👉 sweetwater.sjv.io/Pioneer-DJ-PLX-CRSS12
These are fuggin awesome, they might have to be my studio turntables and my rev7 be the dedicated on the go controller. It's either these or CDJ3000s right now anyways.
Hi, thanks for your interest! If you’re using the PLX-CRSS12’s as part of a setup with a mixer and Serato or Rekordbox, the sync feature in the software will be available just like with any other controller. Of course, if you are working with “real” vinyl, everything would be manual just like the old days. 😉 Hope this helps a bit - feel free to contact me directly with any further questions, and thanks again! Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
Hey there! Thanks so much for reaching out. The main cartridge that we recommend running with the new CRSS12s is the Ortofon OM Q.Bert cartridges. I’ve copied a link to those below: www.sweetwater.com/store/detail/OrtQBertOM--ortofon-qbert-turntable-cartridge-and-stylus Feel free to reach out with any further questions! Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
Thanks for this. But I'm having an issue with my pair. I have them connected to my S11 via RCA and USB but when I have a song rolling on deck 1 and then change the deck from 1 to 3, it's still controlling what's on deck 1 on the platter, and not allowing me access to deck 3 (despite that it says it's set to deck 3)... What am I doing wrong? Or is this a known issue? Because I can't figure out where I'm going wrong. I just tried this on my Rev5 and it works fine. Is it something to do with the S11? I'm also wondering if stem level control via the EQs is an option on the S11 like it is on the Rev5? Any help on this stuff is greatly appreciated.
I need a question answered, please. I am an analog rotary mixer dj. I can care less about battle style. Can I hook them up through my my reloop flux and have them work in digital mode with out a needle!!!!
Yeah of course the drawbacks aren't shown in such a video: 1st there is no rotary knob for the stopping speed. 2nd the motor is quite unsteady (+/- 0.3 BPM), which makes beatmatching difficult 3rd no engagement at 0% speed adjustment 4th the pads can be bigger, no clue why it's that small. So overall, not what you expect from that high price class.
I need to refurb my old Tech Mk II's - so much $$ for service and shipping back n forth for repairs.. Then I see these... I'm drooling. Now I don't know what to do... I think I gotta have these...
Across DVS and needleless scratching, full rekordbox and Serato integration, and nearly endless MIDI, mechanical, and digital performance flexibility, the PLX-CRSS12 is an unrelenting force of turntablism that’s equally powerful in hands of new- and old-school DJs. Which features are you most looking forward to taking for a spin? Sound off in the comments, and head over to Sweetwater for an in-depth look at Pioneer DJ’s PLX-CRSS12 hybrid direct drive turntable 👉 sweetwater.sjv.io/Pioneer-DJ-PLX-CRSS12
The fact you can isolate the stems is insane. Love it!!
We just saw history being made, folks. I believe this may be the first scratch DJ demo of a napkin.
went Klangfarbe to try it on for size .I am head over heels in love with this deck
oh god i so need these
These napkins are special Pioneer DJ napkins.
Imagine cutting up with a napkin 😂
This is super rad!
These are fuggin awesome, they might have to be my studio turntables and my rev7 be the dedicated on the go controller. It's either these or CDJ3000s right now anyways.
Can you pitch sync with the same song on both decks or do you have to manually move the pitch for them to both be the same speed?
Hi, thanks for your interest! If you’re using the PLX-CRSS12’s as part of a setup with a mixer and Serato or Rekordbox, the sync feature in the software will be available just like with any other controller. Of course, if you are working with “real” vinyl, everything would be manual just like the old days. 😉
Hope this helps a bit - feel free to contact me directly with any further questions, and thanks again!
Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
What kind of needles/ cartridges do you guys recommend for these beauties of turntables!?
Hey there! Thanks so much for reaching out. The main cartridge that we recommend running with the new CRSS12s is the Ortofon OM Q.Bert cartridges. I’ve copied a link to those below:
www.sweetwater.com/store/detail/OrtQBertOM--ortofon-qbert-turntable-cartridge-and-stylus
Feel free to reach out with any further questions!
Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
Thanks for this. But I'm having an issue with my pair. I have them connected to my S11 via RCA
and USB but when I have a song rolling on deck 1 and then change the deck from 1 to 3, it's still controlling what's on deck 1 on the platter, and not allowing me access to deck 3 (despite that it says it's set to deck 3)...
What am I doing wrong? Or is this a known issue? Because I can't figure out where I'm going wrong. I just tried this on my Rev5 and it works fine. Is it something to do with the S11?
I'm also wondering if stem level control via the EQs is an option on the S11 like it is on the Rev5?
Any help on this stuff is greatly appreciated.
If you are not playing real wax get the Rane 12s to solve this issue!
The assignment of the deck only applies to the MIDI functions. It does not switch your timecode control to another deck.
I need a question answered, please. I am an analog rotary mixer dj. I can care less about battle style. Can I hook them up through my my reloop flux and have them work in digital mode with out a needle!!!!
If you guys see how powerful stems are you need to use Serato technology stems to make better quality stems for your standalone units💪🏽💪🏽
Watch me cut with a pancake. Call me DJ Morning Jam
kaya po ba one laptop, split screen, DDJ-flx4at DJ-FLXCRSS12, MIXER ,DJ-FLXCRSS12
Super awesome 🔥🔥🔥🔥🔥
WOW!!!
Lo voy a cambiar por mi rev 7 👌
Yeah of course the drawbacks aren't shown in such a video:
1st there is no rotary knob for the stopping speed.
2nd the motor is quite unsteady (+/- 0.3 BPM), which makes beatmatching difficult
3rd no engagement at 0% speed adjustment
4th the pads can be bigger, no clue why it's that small.
So overall, not what you expect from that high price class.
So the clamps are like Phase😮
no the time code comes from the deck the clamp attaches to the spindle which gives you the control over the timecode
Nice
Is the clamp included, or is Pioneer charging an additional $2000 for that?
The Magvel clamp is included. It its necessary when using the digital vinyl needle mode.
I want one. :)
I need to refurb my old Tech Mk II's - so much $$ for service and shipping back n forth for repairs.. Then I see these... I'm drooling. Now I don't know what to do... I think I gotta have these...
Niiiiiiice!
Josie Extension
Schinner Lock
Margaret Burgs
Owen Roads
Muller Coves
Agustin Streets
Abbott Flats
Napkin you say…🤔🤣
Rafael Glen
So, I guess they assume that no one uses turntables in the normal position anymore. Except for me.