Are the knobs stepped or stepless? I'm looking into getting a macro board with stepped knobs for fine LUT editting, but idk if you can program them to act as vertical or horizontal mouse movements on the monitor. I basically need to click and drag two sets of vertical and horizontal sliders over and over again for work
With steps, you certainly can, in the programming software, there is an option to program a button to act as "Control+Mouse Wheel Up or down" or any other combination, you can even program keys to act as Mouse right click or left click.
I ordered this keypad after your reply the other day. Very excited for it!!! One last question: are the stems for the rotary knobs the o-style (full circle) or d-style (half circle)?
All 3 knobs are full continuous circles, no caps, they spin endlessly. I made a video on the Loupedeck live, a more expensive device. Honestly, I use this keypad more than I use the Loupedeck. In the video, I also share why I prefer this keypad vs. the much more expensive Loupedeck.
@@RandomTeq I meant what shape are the stems that connect to the dials (which you can see when you take one of the dial caps off), and of course the hole on the bottom of the caps will match.
Circular, with a horizantal groove in the middle. Google "potentiometer". If you're looking to customize it with different knobs, they're readily available on Amazon. Let me see if I can provide you with a link. Found some nice ones. I would recommend buying from Amazon since they have an easier return process. Amazon.com: amzn.to/3PgD3Iq Aliexpress: s.click.aliexpress.com/e/_DDUx9CV
@@RandomTeq perfect, thank you so much for your help!!! So you know my end goal, I'm going to put the 12 key/4 dial variant of this keyboard model into a flight sim motion rig, and those dials will be used for things like tuning the radios in DCS.
Is it possible to configure a key to type an entire phrase? I need this keyboard for bash commands. I am struggling to configure entire commands on a single key on this keyboard.
I suppose it can be done, but it requires some work around. There's a very nice volume mixer with a screen and 4 individual knobs you can check out from a company called BEACN. amzn.to/3XaIVHt There's also a cheaper option of 69 USD with the PC Panel Mini. www.getpcpanel.com/product-page/pcpanel-mini
Use a Windows PC, a data cable, insert the usb-c all the eay in, press any key, and if it doesn't show connected, it's likely a faulty unit. The process is very easy. If it's not going well, it's mostly likely a bad unit.
I have seen the video you posted on your RUclips channel. Just to clarify, the software you used for the keypad you posted a video about is not the same as shown in my video. You will find the link to download the correct software in the video description.
@@RandomTeq ı know ı try to use your software cause its more effective. But like i said that software doesn't see mine device i will try with another cable for that software.
Is it possible to program the Macro pad on one PC and then use it for another PC without the software. I want to use it for my work laptop which does not allow third party software. So i want to program the shortcuts from personal PC and then use it for my work laptop. Is that possible?
Yes, the macropad stores the assigned characters in the macropad itself. Also, the software for the macropad doesn't require installation, meaning, once you download the folder with software files on your personal or work PC, you just click to open, no installation required.
I HAVE THE SAME JSUT ARRIVE , BUT IT THROWS ME ERROR WITH THE SOFTWARE I GOT , LETS SEE IF YOUR WORKS, THANKS A LOT BEFORE HAND. 🙏🙏🙏HOPEFULLY I TWORKS🙏🙏🙏
This is the software to use, it should say "connected" top once you connect the device to your computer. drive.google.com/file/d/1qJkhFu_B8z2hHU_PM7Jlm6ANJdkBWDYC/view?usp=sharing
You don't need to click or do anything, insert the dongle, and it should connect right away, the buttons on the back are for layers and function, if it the didn't work, try the switch in the middle, it can be moved to right, left and center, check all of them.
In theory, it's possible, but I think it's difficult. You're better off buying a cheap sound board. Here's one on offer for 40 USD and a rating of 4.5 stars: amzn.to/49671WM
Press and hold the button on the top right (the small button to switch between layers), it should show up on the list of Bluetooth devices. Did you order the Bluetooth version?
Going to use it for da Vinci Studio I have the upgraded version only issue is I'm worried that the software for it is malware so I need to figure out how to fix that first
If you have an unused laptop (windows), you can use it to program the pad. I personally use one layer for davinci and another for Audacity. During a recent trip where I needed to edit a video, i released how much more efficient this thing was, truly a game changer!
30 USD on AliExpress. s.click.aliexpress.com/e/_DdLyFiH
8 месяцев назад
Looking at the layout at 3:31 there are keys with both ; and : or both ' and " - but how do I tell the software that I only want a ; and not ;: ? Grateful for any suggestions.
The priority is for 2.4GHz, assuming you connect bluetooth to one computer and use the dongle for another. The one the dongle is the one that will work, to have it work bluetooth, you have to unplug the dongle.
There's a link to the software in the description. Download it and use it to program. It's relatively easy to use. (Program doesn't require installation)
I have tested it. Unfortunately, there's no way to reset it. How about trying to download the software in a different pc and try your to program it from there?
Yes, I use mine with Davinci Resolve and Audacity. It helps with assigning the most used key stroke combinations (copy, paste, cut, copy attributes ect...) You will need a windows PC to assign the shortcuts.
@@RandomTeq oh im on logic, which is only mac . but couldnt i do auto assign , same way i do with my text keboard? kinda map to keys, pressing the key (or button) and then allocating the command
The keys on the macropad are all assigned to the letter "S" or empty, so no, it's not possible. If you try the press and assign method, the key you press will have no value.
Thanks for the video. Can you assign different keys / dials to multiple pieces of software? Eg one set of keys for photoshop , another for premier pro etc. so when you’re in the software it switches the macros automatically
Agree. The button that switches layers allows you to do that in a simple way, the first click let you know what layer you're on, you can also have a colored light for the layer that's will stay on as long as the device is plugged to a power source.
Didn't test, but I would say it's the perfect one to try on given the price point.
8 месяцев назад
Looking at the available keys at 3:31 there are keys with both ; and : or both ' and " - but how do I tell the software to do just one of the two characters?
Hit download straight away after choose the (one) character you want.
8 месяцев назад
@@RandomTeq Thanks for the fast reply! But the button has both characters on it so I can't just enter one of them. It becomes , < Or did you mean I should mark the key I want, click on the center text box, enter a character on my keyboard so it ends up in the text box and then hit Download? I tried that and it says Download Success in green up top but the function isn't downloaded onto the keyboard.
What's the function/action you want to download? If you only want one character, you can look for it in another tab/page.
8 месяцев назад
@@RandomTeq Really appreciating the input here - thanks! I need one knob to do ; in one direction and : in the other and one knob to do < in one direction and > in the other (standard keys for brush hardness and brush size in Photoshop when using Swedish). The < and > are available on the Ctrl/Alt/Shift page but if I add those, it converts to Shift + < for some reason. I got it working by redefining the shortcuts in Photoshop to more readily available characters - but it would have been awesome to have it work with stock Photoshop instead of adapting the shortcuts on each PC I use it on.
Got you! Cheers to the Swedish audience. I had a feeling you were attempting to use it for an editing software :) I tried it, same results as yours! I believe it's a keyboard limitation as I can't get rid of the (+) but at least you're able to change the editing software shortcut to go around it. I use it on Davinci, and it's slightly worse as Davinci doesn't have shortcuts for certain keys at all.
![Yailin La Mas Viral, @kreizyk.official - Dale 2 (Remix) [Video Oficial]](http://i.ytimg.com/vi/JaYHBzgqz94/mqdefault.jpg)
Please pin📌
It looks so good. The knobs are very tempting.
Hey Guil, thanks for dropping by!
Are the knobs stepped or stepless? I'm looking into getting a macro board with stepped knobs for fine LUT editting, but idk if you can program them to act as vertical or horizontal mouse movements on the monitor. I basically need to click and drag two sets of vertical and horizontal sliders over and over again for work
With steps, you certainly can, in the programming software, there is an option to program a button to act as "Control+Mouse Wheel Up or down" or any other combination, you can even program keys to act as Mouse right click or left click.
@@RandomTeq that sounds perfect. Thanks for the quick and detailed response!
Thanks for watching!
I ordered this keypad after your reply the other day. Very excited for it!!! One last question: are the stems for the rotary knobs the o-style (full circle) or d-style (half circle)?
All 3 knobs are full continuous circles, no caps, they spin endlessly.
I made a video on the Loupedeck live, a more expensive device. Honestly, I use this keypad more than I use the Loupedeck.
In the video, I also share why I prefer this keypad vs. the much more expensive Loupedeck.
@@RandomTeq I meant what shape are the stems that connect to the dials (which you can see when you take one of the dial caps off), and of course the hole on the bottom of the caps will match.
Circular, with a horizantal groove in the middle. Google "potentiometer".
If you're looking to customize it with different knobs, they're readily available on Amazon. Let me see if I can provide you with a link.
Found some nice ones. I would recommend buying from Amazon since they have an easier return process.
Amazon.com:
amzn.to/3PgD3Iq
Aliexpress: s.click.aliexpress.com/e/_DDUx9CV
@@RandomTeq perfect, thank you so much for your help!!! So you know my end goal, I'm going to put the 12 key/4 dial variant of this keyboard model into a flight sim motion rig, and those dials will be used for things like tuning the radios in DCS.
Best of luck to you! Thanks for dropping by.
does the rgb work when its running on the battery?
No, only when connected with a usb or any other power source.
Is it possible to configure a key to type an entire phrase? I need this keyboard for bash commands. I am struggling to configure entire commands on a single key on this keyboard.
It's capped at 18 characters per key. Although the software seems to allow and record 500+, when tested, it only goes as far as 18.
can you record key strokes?
Can you give an example of what you mean?
Can you control the windows mixer with this? Say I want to increase discord / Game volume, would it work?
I suppose it can be done, but it requires some work around. There's a very nice volume mixer with a screen and 4 individual knobs you can check out from a company called BEACN.
amzn.to/3XaIVHt
There's also a cheaper option of 69 USD with the PC Panel Mini.
www.getpcpanel.com/product-page/pcpanel-mini
Hello in software it says device disconnect and i cant connect my device do u know a way to do it?
Use a known good data cable. Not every USB-C cable is a data cable.
@@RandomTeq okay i will try with another cable but if it still doesn't work?
Use a Windows PC, a data cable, insert the usb-c all the eay in, press any key, and if it doesn't show connected, it's likely a faulty unit.
The process is very easy. If it's not going well, it's mostly likely a bad unit.
I have seen the video you posted on your RUclips channel.
Just to clarify, the software you used for the keypad you posted a video about is not the same as shown in my video.
You will find the link to download the correct software in the video description.
@@RandomTeq ı know ı try to use your software cause its more effective. But like i said that software doesn't see mine device i will try with another cable for that software.
Is it possible to program the Macro pad on one PC and then use it for another PC without the software. I want to use it for my work laptop which does not allow third party software. So i want to program the shortcuts from personal PC and then use it for my work laptop. Is that possible?
Yes, the macropad stores the assigned characters in the macropad itself.
Also, the software for the macropad doesn't require installation, meaning, once you download the folder with software files on your personal or work PC, you just click to open, no installation required.
@@RandomTeq thank you for the clarification!
Could I use it as a hot keys in streamlabe or obs or just some app
Yes, I use it on OBS (start recording, stop recording & change scenes).
have to tried color grade with this thing in premiere?
I don't use Premiere, but i regularly use it with Davinci Resolve and Audacity, and it is extremely good.
I HAVE THE SAME JSUT ARRIVE , BUT IT THROWS ME ERROR WITH THE SOFTWARE I GOT , LETS SEE IF YOUR WORKS, THANKS A LOT BEFORE HAND. 🙏🙏🙏HOPEFULLY I TWORKS🙏🙏🙏
This is the software to use, it should say "connected" top once you connect the device to your computer.
drive.google.com/file/d/1qJkhFu_B8z2hHU_PM7Jlm6ANJdkBWDYC/view?usp=sharing
Hello.I have this keyboard ,but where I can download keyboard software?.Thank you.
From the product page, there's a Google drive link. Here it is:
drive.google.com/file/d/1qJkhFu_B8z2hHU_PM7Jlm6ANJdkBWDYC/view?usp=sharing
@@RandomTeq Thank you! You are my hero!
No worries 👍 ☺️
I have the same one but i dont know how to use the 2.4 usb connection. How can i put the keyboard in that mode?
You don't need to click or do anything, insert the dongle, and it should connect right away, the buttons on the back are for layers and function, if it the didn't work, try the switch in the middle, it can be moved to right, left and center, check all of them.
@@RandomTeq 👌 i will try thanks
can I also use this for voicemod? for a soundboard?
In theory, it's possible, but I think it's difficult. You're better off buying a cheap sound board.
Here's one on offer for 40 USD and a rating of 4.5 stars:
amzn.to/49671WM
it says disconnected
Help understand what happened.
@@RandomTeq it wont connect
Did you use the correct software? Did you use a data USB-C cable?
i cant use Bluetooth help..... i use win 11💔
Press and hold the button on the top right (the small button to switch between layers), it should show up on the list of Bluetooth devices.
Did you order the Bluetooth version?
Mac compatible?
Must be programmed in Windows, but will work on Mac.
@@RandomTeq I do not have a pc, what to do ?
On the sellers page, it says that it can only be programmed on Windows.
I'm using it for macros to play helldivers2....
Any update to this? Does it work for helldivers?
Yes, it works.
They didn't give me the software any idea where I can find it?
Link to download in the description.
hello sir, can i use it on adobe illustrator, tnx in advance.
Hello Easy Project! Yes, you certainly can.
Going to use it for da Vinci Studio I have the upgraded version only issue is I'm worried that the software for it is malware so I need to figure out how to fix that first
If you have an unused laptop (windows), you can use it to program the pad.
I personally use one layer for davinci and another for Audacity. During a recent trip where I needed to edit a video, i released how much more efficient this thing was, truly a game changer!
@@RandomTeq hi, will i be able to use it on macOs?
Button assignment van only be done on windows, once done, it can be used on mac.
@@RandomTeqi really wanted to get one but then i dont have a pc to set it up. Sadly. Thank you though, i appreciate it
No worries, hope you enjoyed the video.
Thanks for turning in.
on Amazon Canada, it sells for $77.44 ----- a little too much.......... 👎👎
30 USD on AliExpress.
s.click.aliexpress.com/e/_DdLyFiH
Looking at the layout at 3:31 there are keys with both ; and : or both ' and " - but how do I tell the software that I only want a ; and not ;: ? Grateful for any suggestions.
Software?
Link to download is in the description.
That looks pretty nice for video editing as well
It is indeed!
That's really impress items which is more cheaper than the tour box . .
"$27 US Dollars" man... doubled in price now 😭
Buy from AliExpress. It's much cheaper, around 32 USD. Here's the link:
s.click.aliexpress.com/e/_DdLyFiH
Do you know how I can reset this macropad? A few buttons stopped work.
Use the provided software.
How do you switch between 2.4ghz reciever mode and BT?
The priority is for 2.4GHz, assuming you connect bluetooth to one computer and use the dongle for another. The one the dongle is the one that will work, to have it work bluetooth, you have to unplug the dongle.
do i can use more then 5 letters?
Yes, upto 18 letter per key.
@@RandomTeq thanks
I have the three buttons keyboard and I can have only five letters
They're not all the same, for the one featured in the video, its 18 characters.
I bought one but no instructions and no software. What can I do?
There's a link to the software in the description. Download it and use it to program. It's relatively easy to use.
(Program doesn't require installation)
Thanks for the video
Could you please tel me how to reset it
No it's not working at all
Before it was workiong fine
Thanks in advance
Are there any signs of life?
Yes only radio buttons and colours I can customise
@@RandomTeq I can customize colors and Top knops
I'm wondering if there is a folder or file I can delete to reset the kepad!
I have tested it. Unfortunately, there's no way to reset it.
How about trying to download the software in a different pc and try your to program it from there?
Hi... Is it possible to have 2 of that connected and use in my pc? Thanks
Hello Justg6231, Yes, since they work independently, there's no problem in having two of them. What purpose you want to use it for?
thời lượng pin là bao lâu với 1 lần sạc ?
I would estimate it to be around 24 hours.
n
Does it have n key rollover? If there is, how many?
Untested at this point, I will revert back soon.
does anyone know if you can use with Music programs like Logic Pro / Albelton and assign shortcuts ?
Yes, I use mine with Davinci Resolve and Audacity. It helps with assigning the most used key stroke combinations (copy, paste, cut, copy attributes ect...)
You will need a windows PC to assign the shortcuts.
@@RandomTeq yo fast reply , legend !
@@RandomTeq oh im on logic, which is only mac .
but couldnt i do auto assign , same way i do with my text keboard?
kinda map to keys, pressing the key (or button) and then allocating the command
The keys on the macropad are all assigned to the letter "S" or empty, so no, it's not possible.
If you try the press and assign method, the key you press will have no value.
@@RandomTeq oh fuck , i dont quite understand. but take your word for it . and thats sucks !
how do i find the softare to configure the keys?
Link in the description.
Where do you get the software from as mine had none.
drive.google.com/file/d/1qJkhFu_B8z2hHU_PM7Jlm6ANJdkBWDYC/view?usp=sharing
Amazing ! Need it !
Do yo know Where is the "up, down, left, down" keys??? I can`t find them.
Find it on the main page (BaseKeys), look to the right in the middle, and they're stacked up just below the "Download" button.
@@RandomTeq Thank you very much~~. I thought they are different keys
Thanks for the video. Can you assign different keys / dials to multiple pieces of software? Eg one set of keys for photoshop , another for premier pro etc. so when you’re in the software it switches the macros automatically
You can, useing the layer function, but it doesn't switch automatically. you have to use the button located on the top left.
Thanks for the reply, would be great to have a digital interface to see which layer you’re on
Agree. The button that switches layers allows you to do that in a simple way, the first click let you know what layer you're on, you can also have a colored light for the layer that's will stay on as long as the device is plugged to a power source.
Are the small knobs and/or larger knob easily removable if I wanted to replace them with custom knobs?
Yes, they can be easily removed.
@@RandomTeq Thank you!!!!!
👍
Is it flashable?
Didn't test, but I would say it's the perfect one to try on given the price point.
Looking at the available keys at 3:31 there are keys with both ; and : or both ' and " - but how do I tell the software to do just one of the two characters?
Hit download straight away after choose the (one) character you want.
@@RandomTeq Thanks for the fast reply!
But the button has both characters on it so I can't just enter one of them. It becomes , <
Or did you mean I should mark the key I want, click on the center text box, enter a character on my keyboard so it ends up in the text box and then hit Download? I tried that and it says Download Success in green up top but the function isn't downloaded onto the keyboard.
What's the function/action you want to download?
If you only want one character, you can look for it in another tab/page.
@@RandomTeq Really appreciating the input here - thanks!
I need one knob to do ; in one direction and : in the other and one knob to do < in one direction and > in the other (standard keys for brush hardness and brush size in Photoshop when using Swedish).
The < and > are available on the Ctrl/Alt/Shift page but if I add those, it converts to Shift + < for some reason.
I got it working by redefining the shortcuts in Photoshop to more readily available characters - but it would have been awesome to have it work with stock Photoshop instead of adapting the shortcuts on each PC I use it on.
Got you! Cheers to the Swedish audience.
I had a feeling you were attempting to use it for an editing software :)
I tried it, same results as yours! I believe it's a keyboard limitation as I can't get rid of the (+) but at least you're able to change the editing software shortcut to go around it.
I use it on Davinci, and it's slightly worse as Davinci doesn't have shortcuts for certain keys at all.