I always do tuning myself on all my vehicles, I teach and explain people . But I could never explain aux screw influence in tuning to other guys. You did it so well !!. I see many mechs just keep the aux closed as they are not sure what to do with it .
Thanks for the information 😊👍👍..... I've just tuned my CI 350 as you taught.... and noticed that, the blasting effect which used to come earlier while throttling up the engine ...has gone! Thank you 👍👍
Very very very good video brother. Nicely explained everything thing, it's a full training videos, Thanks a million for sharing. Best video I watched on RUclips ever till now.🙏
Sir, Thanks for this video.... I am working as a mechanic in Kerala... I don't know the use off emission screw.... Ur video so much helped for me..... Plz make engine resetting video and 5 speed gearbox working resetting video too
@&%#####& Mani ashan 🤔 oo bullet mani Ayal thallu mesri aanu Keralathil paniyariyunbavar kuravanu ngan Chinmay bro yude yella vedio yum kanarundu he is A perfect mechanic also brilliant, he is having excellent idea's Thanks a lot to chinmayji
Sir,I don't have the auxiliary screw for air,I just have two settings in my old ci engine 500cc bullet carburettor can I also go with the same settings as you have shown, superbly explained.♥🙏
Sir while opening auxiliary screw rpm is not much increasing as your bike , firstly it increases and while more opening it lower down . Pls tell the problem in bike model 2010 only 5500 kms driven . No other problem in motorcycle but i want to tune my motorcycle as yours having water droplets in silencer . Your tuning is perfect 👍🏻👍🏻
You did wonderful job with bike its buffing and nickle work is very much appreciative, my senior's royal Enfield mechanismo is in workshop for whole work and modification of engine with old model bullet & heavy Crank but i am not satisfied with buffing, nickle and paint job, i hope he will do nice work on engine, i daily visit workshop for updates , hope i could get chance to visit your workshop, i live in uttar pradesh..
Thank you really your explanation was usefull for the settings,And I have a doubt we just rebored my old model Bullet 1984 Which is G2 Engine but It was having Starting problem so i just showed to a new mechanic he says that the Top Bore doesn't have good Compression and he is asking to change it.What to do because I didn't even drive 2000 km after reboring.so if you have a good idea kindly suggest me
Air scrow bike start krke hi set kiya jata h or wo bhi gadi ki engine ki setting ke mutabik yani new engine bna h uska alag hota h or jo chal chuka hota h uska alag hota h..gadi ke sound ke hisab se hi air set ki jati naki bnd krke
It is not 1.5 to 2. It is different for older models. I know this because I faced this problem with my 1977, while same settings worked with my 1999. I adjusted the same way for the 77 but it had no pickup and problem continued until I adjusted it again till the RPM stayed constant, and the turns were around 3 or more
Hlooo Chinmay bro how are you love you miss you those days nice informative video dear bro and where is your mustache gone nice look dear bro when will I reach u bro miss u bro take care 🥰🥰🥰
Sir Jab maine apne 2007 electra with turbo jo mere mechanic ne band liya hua hai k corburater observer ko two time pe khola to rpm kam ho gya throttle bdaya ik dam rece bada aur phir kam huya aur band ho gya jab maine clock wise ghuma k band kiya to rpm aur engine ka slow theek ho gya sir ye ulta ho gya apki video se iske solution btaye
Hello Sir. I didn't quite understood the auxiliary screw setting. Is it like that the screw needs to be adjusted at a point where RPM of the engine starts increasing?
yes but depends on. it should come to such point that counter clock or clockwise RPM should drop. if the point is perfect then RPM will be high. thanks
Brother! My bike has no auxiliary screw, it has starting chowke,,, ideal screw and air screw.... ! I set it as you mentioned in video,,, 1.5 (3 time) but one problem I'm facing while starting my bullet 350,,,, that I it is must that I pull the chowke! This is 1986 mfd bike,,, but carburetor is new one.
Timing gear tappet must be free to move . Check them when piston on top . Also adjust carburettor piston needle on second from top. 1.5 or 2 turn not recommended for all bike ot totally depends on the condition of your bike health like intake valves / head compression.
Sir, I have Bullet 350 2006 model. I was doing carborator tuning as did you. But was not going like you, rpm getting high and stoping during rpm goes down. What i did as below. 1. Increase rpm without meter 2. Closed auxiliary bolt (tight clock wise mean left to right) 3. Closed air mixture bolt as clockwise. 4. Open air mixture bolt 1.5 to 2 times, rotate right to left side. 5. After that open auxiliary bolt around 3 times. But rpm not getting down slow as CI bullets have and either no water coming from silencer 🤔😥. Please advise🤗 2
just open the aux screw slowly the RPM will increase at one point the RPM will reduce. The maximum RPM is correct set. simply said remember a mountain....slop mountain peak again slop
After seeing ur video sir i tune my carburator after that i get water droplets in silencer but i can't get slow ideling like u my idel screw get out fully .what mistake i made sir? Plz reply
@@MechAutoClinic sir my bike electra ci 5speed is without auxiliary been removed by previous owner I've tuned it by one half turn 1.5 of the air screw starting the bike is also difficult,and when it eventually starts it sometime develops hiccups and stops.what could be the problem
Thanks for waiting so long...and sorry tk keep u waiting..its all depends on which vehicle we get...since i have stopped working on these bikes from 2015...so its rakes some time...i hope u like it... thanks for connected.
Sir i’ve a suzuki samurai. And what problem im facing is bike only runs on half turn out from fully seated on afr screw. Even on half turn bike misfures at lower rpms. Factory recommended is 1.40 turns out but when set the screw to 1.40 it is getting lean. Even it is on 1 turn it is running lean. I’ve not found any solution for this kind of problem. Recently it got rebored. Previously bike runs on 2 turns doesnt faced any kind of problem. After rebore im facing this. Intake manifold flange was new, carburetor o rings are new. Spark plug, cdi, ignition coil are new. Please help sir.
yes, it is chromed. you can do except main engine case. Gear box cover, clutch cover, timing cover you can chrome. Main engine case chrome will five you heating issue, aluminum only exchage the heat well n good
@@MechAutoClinic yes sir, I have vm-24 carb and also the air filter box has that air flow nozzle in it. Have got it fitted last Sunday and it's running fine 🙏
Sir I am getting maximum rpm in 4half turn but pick up is average if I come 2.3 half turn pick up is good mileage will get less so which is the correct position sir
I have 1997 model standard. Recently my bullet is not exceeding 80km/h If i try and accelerate the firing starts missing and goes irratic. I need to keep it under 80km /h. In lower gears also when i try to rev at high RPM same issue is there .. otherwise starting No issues Firing is smooth.
Hello Chinmay Sir.. How are you? the video was really full of useful knowledge. Sir..I have an old bullet with CI engine. the problem I'm facing is that when I need to stop at traffic signal or somewhere else I have to keep brake paddle pressed if I release brakes the bike starts moving without releasing clucth lever and if I tighten the cluctch to fix the problem the kick lever starts slipping. sometimes the engine switches off itself when I stop. What should be the remedy in this situation.
you will find one sweet spot where engine RPM will again increase...or possibly you are opening the screw very fast...do it very very slow to understand RPM...it should work. thanks
Sir in my bullet 350 1989 model there is black sticky material forms in the carburetor. Even after cleaning it comes back within 3 to 4 days. do you know what might be the reason?
OLD FUEL ...BASICALLY FUEL BY PRODUCT IS VARNISH. SO IT IS A STICKY SUBSTANCE. MAKE SURE YOU USE NEW FUEL ALWAYS AND DON'T KEEP FUEL IN THE TANK FOR LONG TIME. ALSO MAKE SURE CARB PACKING IS NOT LEAKY...THANKS
Do you have a video for older CI engines, 1971, which has VM carb but only 2 set points, the idle screw and the AF screw? No resonator/auxillary screw.
Hi Sir Is this settings okay for Mikuni Japan make carb for Bullet. Is this carb have air screw with a spring in between. No other air screw look alike found
@@MechAutoClinic my bike model in 1978, and carb is vm 24, in your video you shown, 3 settings in the carb. But in my carb, i dont find any auxiliary setting in it. So its basically only 2 settings found in it, (the bigger screw for idling and another smaller one), how do i tune this carb? Can you help me with it sir.
My re is 1985 model it has a problem of battery charging. In all time bike have low battery.icant start the bike in first kick .. .It is so harder to kick ..So plz help me
It's very low dear. My same model bike get 44-45 km/ltr. You should maintain that bike well to get more mileage. Better engine oil-gear oil- clutch oil, clean air filter, lubricated chain, properly inflated tyres... Then the last one 'tune the carburator'..
Sir, I have Suzuki Heat 125 Four Stroke, 2006. It houses a Mikuni VM 18 carburettor. Will the setting go same for my bike so far as AFR screw is concerned i.e, 1.5-2 turns? I am eagerly waiting for your response. Thank you! By the way I have set it at two turns and motorcycle even starts without choke and good crisp acceleration. The spark plug colour is like chocolate brown. At electrode it is brown and the thread circumference is black in colour. Please clarify.
Hi Sir i liked your video but my ci engine bullet has micarb carburator and as per video i have open fuel to 1.5 round and slow down the rpm. Then i have slowly open the auxiliary screw but it doesn't affect the rpm. Please suggest something to set accurate petrol mixture
Hi sir, I own 2009 electra 5 speed. While tuning using Aux air screw, rmp drops very slowly but idle rmp is stable. When aux air screw is fuly closed and carb is tuned, engine rmp drops immediately when accelerator is released. Any inputs.
warm the bike followed by open the carb slide for 1/4 portion by adjusting the idle screw. Now adjust the air screw for max rpm. Finally set idle screw for your desired RpM. tuning is done now.
I have the same engine and my mechanic has kept the aux screw to fully closed position.... He always adjusts the air/fuel screw and the idle screw.... I have always had starting problem in cold weather... Summer is still Ok... Please help
Sir, I have Suzuki Heat 125 which has a Mikuni VM18 carburator, may I keep AFR at same 1.2-2 turns? For your info, the AFR screw is at the intake side of the head.
@@MechAutoClinic however the air - fuel ration remains the same at intake manifold, even if same quantity of air passes through carburetor. Then how better mileage?
How to know what is my Bikes Carburettor? As you have mentioned so many variants of carburettor and different ways to tune them. Mine is 2008 Electra 5Speed ES. I haven't changed the carburettor.
majhe clients baherche pan ahet. not only in india. making three different language means three times actual practical process which is not possible. thanks for watching and comment.
Hello Sir , I have a 1966 g2 engine enfield 350cc. The carburetor in my bike doesn't have auxiliary . will the settings remains the same as you have explained in this video? One more query I have what is the milage that we can take out of the bike on decent riding? Please do reply when ever you have spare time to reply.
It's ok if you don't have aux. Don't expect great performance from 1966 model. Just ride the bike and enjoy ... according to age performance is good. Thanks.
भाई साहब प्रणाम आपका जितेंद्र रघुवंशी निवेदन करता हूं इस पोस्ट को हिंदी में डालें भाई साहब पॉइंट सेटिंग का वीडियो आपने नहीं डाला बहुत दिनों से आपसे निवेदन कर रहा हूं आपका जितेंद्र रघुवंशी एमपी डिस्टिक रायसेन हूं
I always do tuning myself on all my vehicles, I teach and explain people . But I could never explain aux screw influence in tuning to other guys. You did it so well !!. I see many mechs just keep the aux closed as they are not sure what to do with it .
Thanks for the information 😊👍👍..... I've just tuned my CI 350 as you taught.... and noticed that, the blasting effect which used to come earlier while throttling up the engine ...has gone!
Thank you 👍👍
Glad it helped
Have taken this bike on your ? Your code engine bullet ?? How was your experience so far ? Can you also use this as your daily driver ?
Simply the most amazing video on youtube for any cast iron lover. God bless you
Sir, you explained in depth.Thanks
Very very very good video brother. Nicely explained everything thing, it's a full training videos,
Thanks a million for sharing. Best video I watched on RUclips ever till now.🙏
Nice video sir i did my setting on my 99 and66 bullet very well explained thanks
Sir,
Thanks for this video.... I am working as a mechanic in Kerala... I don't know the use off emission screw.... Ur video so much helped for me..... Plz make engine resetting video and 5 speed gearbox working resetting video too
My Enfield model 1993.... Is it same for this?
Ok
@@MechAutoClinic sir this tuning same for my model
@&%#####&
Mani ashan 🤔 oo bullet mani
Ayal thallu mesri aanu Keralathil paniyariyunbavar kuravanu ngan Chinmay bro yude yella vedio yum kanarundu he is A perfect mechanic also brilliant, he is having excellent idea's
Thanks a lot to chinmayji
Awesome bhai.,,still remember when we did this on my vehicle
Thanks for sharing this amazing knowledge.
My pleasure!
What a stroke after tuning, it is the bullet's firing I love much more!
पुरानी ३५० झिंदाबाद!
enjoy
thanks for the update on carborator setting, it was helpful, keep updating maintanace for bullet 350 cast iron ingine.
How about the starting in morning .chock needed ??
सर आपका विडियो बहुत अच्छा है पर कृपया कर इसे हिन्दी में बनाए क्योंकि पुरानी बुलटो में माइलेज की बहुत परेशानी होती है
Definitely sir i too mean that
Sir,I don't have the auxiliary screw for air,I just have two settings in my old ci engine 500cc bullet carburettor can I also go with the same settings as you have shown, superbly explained.♥🙏
That's ok. If not having then just tune with two points
Sir while opening auxiliary screw rpm is not much increasing as your bike , firstly it increases and while more opening it lower down . Pls tell the problem in bike model 2010 only 5500 kms driven . No other problem in motorcycle but i want to tune my motorcycle as yours having water droplets in silencer . Your tuning is perfect 👍🏻👍🏻
change in RPM due to AUX is defer. it is bike to bike. not all will have same setting. so I dont think it is wrong in your bike.
You did wonderful job with bike its buffing and nickle work is very much appreciative, my senior's royal Enfield mechanismo is in workshop for whole work and modification of engine with old model bullet & heavy Crank but i am not satisfied with buffing, nickle and paint job, i hope he will do nice work on engine, i daily visit workshop for updates , hope i could get chance to visit your workshop, i live in uttar pradesh..
Always welcome to my shop.
@@MechAutoClinic : sir its more then shop for me i am crazy about this motorcycle , how can i contact your workshop for a visit or for motorcycle...
@@MechAutoClinic : sir want to ask from you can you please make video on timing and point settings on old royal Enfield.?
@@crazynmad89 ok
@@crazynmad89 macasp@gmail.com send me u r details there
I will share mine over there only
Is it necessary to open the primary air screw..can we lock outer air permanently???
Hlo broo nice and awesome video 👍
Hello boss.. Finally I got you.. Have been reading about you for a very long time.. Wanted to talk to you.. Thanks boss
Its Really informative and good work man...
Thank you for appreciating
@@MechAutoClinic Hai brother can you please mention which grade oil is best in old ci engine(royal Enfield std 350 petrol) waiting for the reply
Thank you very much for sharing this video
Crome quality to bahut top quality ki hai👌👌👌👌❤
Thank you really your explanation was usefull for the settings,And I have a doubt we just rebored my old model Bullet 1984 Which is G2 Engine but It was having Starting problem so i just showed to a new mechanic he says that the Top Bore doesn't have good Compression and he is asking to change it.What to do because I didn't even drive 2000 km after reboring.so if you have a good idea kindly suggest me
what is the compression on the gauge?
@@MechAutoClinic I don't have any seperate gauge for the compression
That's so nice a video... The best part was you told how to validate the settings... Thank you very much Chinmay ji💐💐💐
thanks for appreciation
Air scrow bike start krke hi set kiya jata h or wo bhi gadi ki engine ki setting ke mutabik yani new engine bna h uska alag hota h or jo chal chuka hota h uska alag hota h..gadi ke sound ke hisab se hi air set ki jati naki bnd krke
Hi Chinmay, I have Bullet CI 1980 model CB point /12 volt with three phase coil output….can I use 55/60 w bulb in place of 35/35 wt. ?
Many thanks Chinmoy Sir...👍👍
you are welcome
It is not 1.5 to 2. It is different for older models. I know this because I faced this problem with my 1977, while same settings worked with my 1999. I adjusted the same way for the 77 but it had no pickup and problem continued until I adjusted it again till the RPM stayed constant, and the turns were around 3 or more
Crank weight is different na
For VM carbs the AirScrew beyond 3 turns means your pilot jet need ro 1 size up
Bast video sir
Jai bharat
thank you very much for appreciation
If bike don't have auxiliary unit then what is air mixture turns setting,my bike is 1962 model how I set it I replace my carburettor but it don't work
Very well informed
This tuning is suitable for 350 fitted with miccarbs also, right sir
Yes. All VM series.
Superb sir jii❤️❤️
Hlooo Chinmay bro how are you love you miss you those days nice informative video dear bro and where is your mustache gone nice look dear bro when will I reach u bro miss u bro take care 🥰🥰🥰
Sir Jab maine apne 2007 electra with turbo jo mere mechanic ne band liya hua hai k corburater observer ko two time pe khola to rpm kam ho gya throttle bdaya ik dam rece bada aur phir kam huya aur band ho gya jab maine clock wise ghuma k band kiya to rpm aur engine ka slow theek ho gya sir ye ulta ho gya apki video se iske solution btaye
What should be the float height in VM 24 carburettor
i will let u know via video if it is ok with u...so every one will get to know about it. thanks
28 to 30 mm
Fantastic video!
Hello Sir. I didn't quite understood the auxiliary screw setting. Is it like that the screw needs to be adjusted at a point where RPM of the engine starts increasing?
yes but depends on. it should come to such point that counter clock or clockwise RPM should drop. if the point is perfect then RPM will be high. thanks
sir hats off to you
Brother! My bike has no auxiliary screw, it has starting chowke,,, ideal screw and air screw.... ! I set it as you mentioned in video,,, 1.5 (3 time) but one problem I'm facing while starting my bullet 350,,,, that I it is must that I pull the chowke! This is 1986 mfd bike,,, but carburetor is new one.
Yes,
My 350 is the same as yours!
Set it 1.10 to 1.15
Timing gear tappet must be free to move . Check them when piston on top . Also adjust carburettor piston needle on second from top. 1.5 or 2 turn not recommended for all bike ot totally depends on the condition of your bike health like intake valves / head compression.
Looking at your video....it appears like the choke was ON.....but tuning is always done with choke in off condition.
Sir can u please tell me about putting mikuni carburetor for my old bullet 500 cc
Hi, My bullet 500cc got vm28 carbe. Can I do the same settings for that
Thanks
yes
Sir, I have Bullet 350 2006 model. I was doing carborator tuning as did you.
But was not going like you, rpm getting high and stoping during rpm goes down.
What i did as below.
1. Increase rpm without meter
2. Closed auxiliary bolt (tight clock wise mean left to right)
3. Closed air mixture bolt as clockwise.
4. Open air mixture bolt 1.5 to 2 times, rotate right to left side.
5. After that open auxiliary bolt around 3 times.
But rpm not getting down slow as CI bullets have and either no water coming from silencer 🤔😥.
Please advise🤗
2
Sir my bullet does not goes beyond 40kmph is that due to carborator
All engine work is done about 6 months before
This bullet sound was so good....😍
thanks for comment
Hello sir at 12.30 how did you set the auxillary.You had mentioned rpm should be max and will be low if we rotate either side. Kindly clarify
Ya he done it so fastly
just open the aux screw slowly the RPM will increase at one point the RPM will reduce. The maximum RPM is correct set. simply said remember a mountain....slop mountain peak again slop
After seeing ur video sir i tune my carburator after that i get water droplets in silencer but i can't get slow ideling like u my idel screw get out fully .what mistake i made sir? Plz reply
you made a mistake...just re fix the screw and set the idle. it will be ok
@@MechAutoClinic thanks a lot sir for reply you r great person too...
@@MechAutoClinic sir my bike electra ci 5speed is without auxiliary been removed by previous owner I've tuned it by one half turn 1.5 of the air screw starting the bike is also difficult,and when it eventually starts it sometime develops hiccups and stops.what could be the problem
Thanku so much sir,,,
That ws much much importnt 4 me..
Thanks for waiting so long...and sorry tk keep u waiting..its all depends on which vehicle we get...since i have stopped working on these bikes from 2015...so its rakes some time...i hope u like it... thanks for connected.
इस वीडियो का हिंदी अनुवाद करें आदरणीय आपका नंबर नहीं मिल रहा हमको गाड़ी भी स्टेशन कराना है आपसे मैं बहुत प्रभावित हूं
Sir i’ve a suzuki samurai. And what problem im facing is bike only runs on half turn out from fully seated on afr screw. Even on half turn bike misfures at lower rpms. Factory recommended is 1.40 turns out but when set the screw to 1.40 it is getting lean. Even it is on 1 turn it is running lean. I’ve not found any solution for this kind of problem. Recently it got rebored. Previously bike runs on 2 turns doesnt faced any kind of problem. After rebore im facing this. Intake manifold flange was new, carburetor o rings are new. Spark plug, cdi, ignition coil are new. Please help sir.
Check the carb and clean it thoroughly. And AFR setting for any two stroke is 1.5 to 2 turns.
Sir what will be the spark plug gap ?
Sir mere 2001 model bullet ka main engine oil drain nut sleep ho gya haa kyaa kru....
repairing ka video upload kiya hain please check the video list. thanks
@@MechAutoClinic sir i am already see your all videos sir...that video on uce engine not for CI...
Is that engine chrome plated or buffed, please reply. Can you suggest a way to get my bullet engine mirror like shine permanently.
yes, it is chromed. you can do except main engine case. Gear box cover, clutch cover, timing cover you can chrome. Main engine case chrome will five you heating issue, aluminum only exchage the heat well n good
The rpm is not constant , in my 83 model 350 its slightly raised after 8,10 km ride
Axjaly skru kitna churi kholna hai please bataye
Hello sir, can we install carburettor flange as in this bike on my 1966 350cc enfield for better mileage
you can ...but then you must have carb which is compatible with flange
@@MechAutoClinic yes sir, I have vm-24 carb and also the air filter box has that air flow nozzle in it. Have got it fitted last Sunday and it's running fine 🙏
What If There Is No Auxiliary Nut ?
Sir I am getting maximum rpm in 4half turn but pick up is average if I come 2.3 half turn pick up is good mileage will get less so which is the correct position sir
as per the video I go. thanks.
I have 1997 model standard. Recently my bullet is not exceeding 80km/h
If i try and accelerate the firing starts missing and goes irratic. I need to keep it under 80km /h.
In lower gears also when i try to rev at high RPM same issue is there ..
otherwise starting No issues
Firing is smooth.
You, should check the ignition advancing system inside the CB point.
Hello sir,
Please tell us how to tune the carburetor on Bullet standard 500 uce.
will post up video soon. thanks
@@MechAutoClinic Thanks 🙏🏻
Hello Chinmay Sir..
How are you? the video was really full of useful knowledge.
Sir..I have an old bullet with CI engine. the problem I'm facing is that when I need to stop at traffic signal or somewhere else I have to keep brake paddle pressed if I release brakes the bike starts moving without releasing clucth lever and if I tighten the cluctch to fix the problem the kick lever starts slipping. sometimes the engine switches off itself when I stop. What should be the remedy in this situation.
clutch center nut loose or clutch setting is not good or clutch plates and frictions plates are gone. thanks
@@MechAutoClinic thanks a lot Sir.
Hey brother….when I start opening auxiliary screw then my bullet RPM goes down and the engine stop………
you will find one sweet spot where engine RPM will again increase...or possibly you are opening the screw very fast...do it very very slow to understand RPM...it should work. thanks
@@MechAutoClinic ok brother……I’ll try
❤
Sir in my bullet 350 1989 model there is black sticky material forms in the carburetor. Even after cleaning it comes back within 3 to 4 days. do you know what might be the reason?
OLD FUEL ...BASICALLY FUEL BY PRODUCT IS VARNISH. SO IT IS A STICKY SUBSTANCE. MAKE SURE YOU USE NEW FUEL ALWAYS AND DON'T KEEP FUEL IN THE TANK FOR LONG TIME. ALSO MAKE SURE CARB PACKING IS NOT LEAKY...THANKS
Do you have a video for older CI engines, 1971, which has VM carb but only 2 set points, the idle screw and the AF screw? No resonator/auxillary screw.
There is a miss fire in air filter side old bullet . Some times it's miss fire while starting the bike. Can u help ?
thanks sir and nice video
Hi Sir
Is this settings okay for Mikuni Japan make carb for Bullet. Is this carb have air screw with a spring in between.
No other air screw look alike found
yes common for VM24/28.thank you very much for appreciation
My old bike has two settings, can guide me abt that. Thank you
please explain 2 matlab kaunsi setting
@@MechAutoClinic my bike model in 1978, and carb is vm 24, in your video you shown, 3 settings in the carb.
But in my carb, i dont find any auxiliary setting in it.
So its basically only 2 settings found in it, (the bigger screw for idling and another smaller one), how do i tune this carb? Can you help me with it sir.
@@vinanthsp815 just turn AFR screw to 1.5 from full close position thats all...
My re is 1985 model it has a problem of battery charging. In all time bike have low battery.icant start the bike in first kick ..
.It is so harder to kick ..So plz help me
Your location please.
@@MechAutoClinic kerala .kollam
i can solve the problem but need the bike in Pune
Easy reference all time
mine is 2008 model, which carburettor it has, and mine is giving 20-22 kmpl is it ok or any measure to improve this?
It's very low dear. My same model bike get 44-45 km/ltr.
You should maintain that bike well to get more mileage.
Better engine oil-gear oil- clutch oil, clean air filter, lubricated chain, properly inflated tyres... Then the last one 'tune the carburator'..
thank you.this video is so much educative
you are welcome. thanks for appreciating.
Sir, I have Suzuki Heat 125 Four Stroke, 2006. It houses a Mikuni VM 18 carburettor. Will the setting go same for my bike so far as AFR screw is concerned i.e, 1.5-2 turns? I am eagerly waiting for your response. Thank you! By the way I have set it at two turns and motorcycle even starts without choke and good crisp acceleration. The spark plug colour is like chocolate brown. At electrode it is brown and the thread circumference is black in colour. Please clarify.
bike starting without choke means mixture is wrong...its rich,. make it lean.
Hi, is there any way I can come to your garage regarding my bullet electra? I stay in Thane, Maharashtra.
Hi Sir i liked your video but my ci engine bullet has micarb carburator and as per video i have open fuel to 1.5 round and slow down the rpm. Then i have slowly open the auxiliary screw but it doesn't affect the rpm. Please suggest something to set accurate petrol mixture
Make sure aux vent is clean
@@MechAutoClinichow to set mixture without aux vent .in micarb carburator . Is best mixture is when the rpm is high
Thank u
Boss in my ci 350 bullet .mechanic has tunned the mixture and speed knob.he completely tighten the outer air supply .
Is it fine to go with that???
I dont think..its not the proper way to tune
Same mere mechanic ne b liya hai 2007 electra model me
Hii I like to know about silencers that are suitable for G2 engine
sir at the time of tunning the carburetor we use new sparkplug or go with old one plz tell
Go with new plug so that later we can understand tuning is perfect or not .
Hi sir, I own 2009 electra 5 speed. While tuning using Aux air screw, rmp drops very slowly but idle rmp is stable. When aux air screw is fuly closed and carb is tuned, engine rmp drops immediately when accelerator is released. Any inputs.
Any updates? I too have the same issue
Hi can I tune my carb without touching auxiliary air screw (tuning with pilot and idling screw?)
warm the bike followed by open the carb slide for 1/4 portion by adjusting the idle screw. Now adjust the air screw for max rpm. Finally set idle screw for your desired RpM. tuning is done now.
I have the same engine and my mechanic has kept the aux screw to fully closed position.... He always adjusts the air/fuel screw and the idle screw.... I have always had starting problem in cold weather... Summer is still Ok... Please help
you can try as i have shown in the video. may help you. thanks
you can try as i have shown in the video. may help you. thanks
@@MechAutoClinic I dont have that special tool to help in the tuning
Sir, I have Suzuki Heat 125 which has a Mikuni VM18 carburator, may I keep AFR at same 1.2-2 turns? For your info, the AFR screw is at the intake side of the head.
VM Yes.
Hi bro nice sound pls tell me exhaust name I want to buy same one
My bullet jerk after changing 3rd to 4gear what is cause of it ?
sir i am having electra cast iron bullet 2007 model
plz help me tune carburetor with auxilary screw
Why is the auxiliary air vent used ? Why can't the same air pass through carburetor?
it gives better performance in terms for mileage
@@MechAutoClinic however the air - fuel ration remains the same at intake manifold, even if same quantity of air passes through carburetor. Then how better mileage?
How to know what is my Bikes Carburettor? As you have mentioned so many variants of carburettor and different ways to tune them. Mine is 2008 Electra 5Speed ES. I haven't changed the carburettor.
VM24
@@MechAutoClinic thanks so much for the quick reply.
Thanks sir. Well explained
Sir jii aapki shop kha hai..
Hi sir,
I own a 85 DELUXE model enfield. Mine doesnot have auxiliary air intake... So could you show how to TUNE the carburator in such bikes..
Same way ...just forget aux if u dont have...
Just fix the airscrew in 1.75 position.
That means 3half turn and a quarter.
Hi bro! I've 1996 ELECTRA and I need VM24 carburetor and air filter for my ride. Can I get it from you?
Sorry for late reply. Yes you can get it but unfortunately we all are in lockdown so I can't help you in shipping.
@@MechAutoClinic bai ji need ur contact number
what is the part called taht is between the engin and carbarator( with the yellowish pipe). my bike does not have that
But I have 1967 ci
Sir ashi video Marathit banava na. Tumche sagle video me pahato. Khup mast astat. Pan jara English........😔😁
majhe clients baherche pan ahet. not only in india. making three different language means three times actual practical process which is not possible. thanks for watching and comment.
Sir,,,,is it same with electra c.i.2009 model?????
Hello Sir , I have a 1966 g2 engine enfield 350cc. The carburetor in my bike doesn't have auxiliary . will the settings remains the same as you have explained in this video? One more query I have what is the milage that we can take out of the bike on decent riding? Please do reply when ever you have spare time to reply.
It's ok if you don't have aux. Don't expect great performance from 1966 model. Just ride the bike and enjoy ... according to age performance is good. Thanks.
@@MechAutoClinic thank you sir for the reply.
Off the petrol then do a ride.and check how many km ur bike runs on floatbowl petrol.
@@sreejus2872 hello, i have tried it sir. It goes 1.6 km in floatbowl
@@tarunnagarkoti1160 thn u will get the avg about 30 to 35
where is your shop???
maharashtra
Old model ci engine HOW TO ADJUST TAPPED PLEASE EXPLAIN
timing setting ka video nanalo(timing wheel position and piston position ,point opening point,)
भाई साहब प्रणाम आपका जितेंद्र रघुवंशी निवेदन करता हूं इस पोस्ट को हिंदी में डालें भाई साहब पॉइंट सेटिंग का वीडियो आपने नहीं डाला बहुत दिनों से आपसे निवेदन कर रहा हूं आपका जितेंद्र रघुवंशी एमपी डिस्टिक रायसेन हूं
ji jarur. gadi ayi agar workshop pe woh kam ke liye toh video upload kar dunga.thank you.
सर आपका नंबर मोबाइल मैं से गायब हो गया अपना नंबर देने का कष्ट करें आपका फैन जितेंद्र रघुवंशी