Hello Csongor, could you pls navigate on which tuya gateway is compatible with this SONOFF SNZB-02D Zigbee sensors? (I bought SONOFF Zigbee Bridge Pro ZBBridge-P, but I sm not able to add to Tuya app unfortunately). Many thanks in advance, Frantisek
@@csongorvarga hello Csondor, I connected these thermometers, they were online for circa 5mins and now all of 5 are offline… please, do you know how to set it up, so I can see online temperature for each sensor?
@@frantisekstanek3409 I am sorry, they are working for me since I got them. What gateway did you use? The gateway is still online in ewelink? Are those themperator sensor within range of the gateway?
Hello Csongor. I did learn a lot from your videos. You can preset so well all this gudgets. I did buy myself the same themperature sensor a few days ago on Amazon to try to make it work whit the NS Panel Pro. I have an issue with sensors. I make it show up on the NS Panel and shows the measurements on the homescreen but I'm not able to make it work on the Thermostat side. I can't integrate him when I set up a new thermostat and I also not able to see the measurements on the thermostat screen. It's the only reason that I buy it and I'm running out of the ideas and paciens. Can you please help me figure out how should I make them work together? Thank you in advance.
OK, since the making of this video, I moved this sensor to my other zigbee network, but I checked the documentation an it is supported by the NSPanel Pro. So it should work. I assume you added this device to the NSPanel Pro under Gateway (in the app), or Add device (on the NSPanel Pro), so you can see the device and the readings. When you create a new thermostat in the "Temp. & HUMI. Display" menu you should be able to select it as a source. Does it show up there?
Wow. Big difference in reported temp and humidity between sonoff and shelly. Which is correct? Is it really ~25 deg C in your room? And ~60% hum in winter?
I forgot to mention it, but I had the Shelly and this side-by-side for days, and the temperature was within a few 0.1 degrees and the humidity within 5%. I record these videos in my small office, and it gets hot with the lights and closed doors. Also I noticed that this sensor responds quickly to changes, and just holding it in my hand is enough for the temperature and the humidity to rise quickly.
Vettem kettőt.. mind a kettőt parkosítottam. Viszont az egyik folyamatosan azt mondja "device offline". (Tuya appon) Nem tudom miért.. esetleg valakinek van valami ötlete?
Interesting vid, I have been considering these. I noticed that the values shown in the NS Panel did not match the device... delay in reporting? I have a few devices that use the 2450s. so got a box of them from Duracell Direct at a reasonable price.
@@csongorvarga At the moment I use a lot of ESP Trig boards to report temp/hum from various positions around the room ( every 20 mins per board) which then get averaged - overkill! But it might be good to have a local display rather than having to look at the dashboard.
@Gary Henderson yes, these are certainly small, easy to just place them anywhere. I hope they better reconnect than the average 433mhz sensorts. Sometimes I replace the battery and it takes ages for the station to pick up the signal.
Hello Csongor, could you pls navigate on which tuya gateway is compatible with this SONOFF SNZB-02D Zigbee sensors? (I bought SONOFF Zigbee Bridge Pro ZBBridge-P, but I sm not able to add to Tuya app unfortunately). Many thanks in advance,
Frantisek
To be honest, and Tuya Zigbee hub should work. I have a Blitzwolf IS-x which is discountined now, but BW-IS10 is still available.
@@csongorvarga hello Csondor, I connected these thermometers, they were online for circa 5mins and now all of 5 are offline… please, do you know how to set it up, so I can see online temperature for each sensor?
@@frantisekstanek3409 I am sorry, they are working for me since I got them. What gateway did you use? The gateway is still online in ewelink? Are those themperator sensor within range of the gateway?
Hello Csongor. I did learn a lot from your videos. You can preset so well all this gudgets. I did buy myself the same themperature sensor a few days ago on Amazon to try to make it work whit the NS Panel Pro. I have an issue with sensors. I make it show up on the NS Panel and shows the measurements on the homescreen but I'm not able to make it work on the Thermostat side. I can't integrate him when I set up a new thermostat and I also not able to see the measurements on the thermostat screen. It's the only reason that I buy it and I'm running out of the ideas and paciens. Can you please help me figure out how should I make them work together? Thank you in advance.
OK, since the making of this video, I moved this sensor to my other zigbee network, but I checked the documentation an it is supported by the NSPanel Pro. So it should work. I assume you added this device to the NSPanel Pro under Gateway (in the app), or Add device (on the NSPanel Pro), so you can see the device and the readings. When you create a new thermostat in the "Temp. & HUMI. Display" menu you should be able to select it as a source. Does it show up there?
Wow. Big difference in reported temp and humidity between sonoff and shelly. Which is correct? Is it really ~25 deg C in your room? And ~60% hum in winter?
I forgot to mention it, but I had the Shelly and this side-by-side for days, and the temperature was within a few 0.1 degrees and the humidity within 5%. I record these videos in my small office, and it gets hot with the lights and closed doors. Also I noticed that this sensor responds quickly to changes, and just holding it in my hand is enough for the temperature and the humidity to rise quickly.
Thank you
Vettem kettőt.. mind a kettőt parkosítottam. Viszont az egyik folyamatosan azt mondja "device offline". (Tuya appon)
Nem tudom miért.. esetleg valakinek van valami ötlete?
@@norbertprell3368 sajnos nem, foleg ha csak az egyik csinalja. Meglehet hogy hibas. De azert elotte egy friss elemmel kiprobalnam ujra.
Interesting vid, I have been considering these. I noticed that the values shown in the NS Panel did not match the device... delay in reporting? I have a few devices that use the 2450s. so got a box of them from Duracell Direct at a reasonable price.
Yes, there is a delay for sure. It is not about exact reporting on that small screen anyway.
@@csongorvarga At the moment I use a lot of ESP Trig boards to report temp/hum from various positions around the room ( every 20 mins per board) which then get averaged - overkill! But it might be good to have a local display rather than having to look at the dashboard.
@Gary Henderson yes, these are certainly small, easy to just place them anywhere. I hope they better reconnect than the average 433mhz sensorts. Sometimes I replace the battery and it takes ages for the station to pick up the signal.
Hi, does anyone know how can I change from fahrenheit to celsius?
2 clicks
Where did you ordered from!?
Sonoff sent this for me for the review. I did not check if it is available in Hungary.