I used a spare door hook, flat metal bent over, to gently prise at one side. Then silicone grease, from plumbing supply shop. Do this every couple of years. Otherwise the action slows and the nylon cogs strip.
0:10 this is the easiest way to remove the cap, but also to break its mechanism, because it has two channels, two slides. The correct way, which is far more difficult, is to slide it towards the engine. 0:30 I doubt this cap will come out that way if it's strong. If it is strong, you will have to dismantle the entire mechanism and unscrew a few bolts from the bottom part. 0:47 It's also easier to put new grease on top of the old one, but I don't know if that's correct.
0:16 I think we are talking about the same thing. Removing this small cover is a two step process. First one - lift the bottom and then pull (slide) downwards. See the arrow. 0:38 If you lift the larger cover as shown it will not break. Once it is loose push it up gently until it cannot move further. 0:47 I simply smeared the old grease, remains on the rods from before. Don't know what grease to use if I would put a new one. Read somewhere that it should be sort of weather resistant. No idea if two different types can be mixed.
@@antoniogarcia3039 0:38 If you lift the larger cover as shown it will not break. I did it with fingers, no tools. Once it is loose lift the bottom end up gently until it cannot move further. Don't force it. This method without disassembling allows just enough space to access the grease with fingers.
@@adimal9576 чет я не понял, мне чтоб добраться до механизма на 124, пришлось открутить тягу трапеции вытащить механизм, а под ним три болта, и только тогда получилось снять крышку и смазать напрвляйки, и они у меня роликовые. А чтоб дворник бегал верх вниз, надо разобрать и убедится что шестерни живы и тяги не слетели. Принцип работы, как кривошипный механизм.
I simply smeared the old one, found on the rods from before. Don't know what to use if I would put new one. Read somewhere that it should be sort of weather resistant....
Thanks a lot Tom, this video saved me a lot of time trying to figure out what to do. Stay safe..
Great video, no messing around
I used a spare door hook, flat metal bent over, to gently prise at one side. Then silicone grease, from plumbing supply shop. Do this every couple of years. Otherwise the action slows and the nylon cogs strip.
Cox sag ol sizin sayenizde arabamdaki wuwe temizliyeni duzeltdim
very helpfull thank you for great video
Не хватает только немного силикона брызнуть ,чтоб не прилагать усилия и не вредить пластиковым элементам при монтаже!
Perfect tuto thank you very much
thanks a lot from japan.
Thanks a lot!
Great video. What type of grease did you use?
Merci beaucoup
🌷🌷🌷🌷🌷🌷thank you
0:10 this is the easiest way to remove the cap, but also to break its mechanism, because it has two channels, two slides. The correct way, which is far more difficult, is to slide it towards the engine.
0:30 I doubt this cap will come out that way if it's strong. If it is strong, you will have to dismantle the entire mechanism and unscrew a few bolts from the bottom part.
0:47 It's also easier to put new grease on top of the old one, but I don't know if that's correct.
Aye man for 0:30 how do you take it off this guy made it seem easy
0:16 I think we are talking about the same thing. Removing this small cover is a two step process. First one - lift the bottom and then pull (slide) downwards. See the arrow.
0:38 If you lift the larger cover as shown it will not break. Once it is loose push it up gently until it cannot move further.
0:47 I simply smeared the old grease, remains on the rods from before. Don't know what grease to use if I would put a new one. Read somewhere that it should be sort of weather resistant. No idea if two different types can be mixed.
@@antoniogarcia3039 0:38 If you lift the larger cover as shown it will not break. I did it with fingers, no tools. Once it is loose lift the bottom end up gently until it cannot move further. Don't force it. This method without disassembling allows just enough space to access the grease with fingers.
👍
Bunu vaxtında bilməmişəm, aynasilənin matoru yandı
Спасибо брат помог
а что после этого? начинает вверх-вниз ещё дворник ходить?
@@adimal9576 чет я не понял, мне чтоб добраться до механизма на 124, пришлось открутить тягу трапеции вытащить механизм, а под ним три болта, и только тогда получилось снять крышку и смазать напрвляйки, и они у меня роликовые.
А чтоб дворник бегал верх вниз, надо разобрать и убедится что шестерни живы и тяги не слетели. Принцип работы, как кривошипный механизм.
what type of lubrication did you use ?
I simply smeared the old one, found on the rods from before. Don't know what to use if I would put new one. Read somewhere that it should be sort of weather resistant....
I wish it was this easy in the w124😔
😀
Смазка поможет не надолго ...
wie kann Mann scheinen wischer wechseln
TU mussen wischer runters nehma dann neiche scheinen rauf geba
why jadi ketar tangan tu boh.
Это не суть, лишь бы они делали все как надо - вопрос некорректен, в любой момент с любым человеком может произойти все что угодно по воле ☝️, Малик!
Может много курит.
I hope it is not disappointing when I say it is not from Marlboro nor Merlot. I am almost 80. 😂😇
Это моторчику капец пришёл , нужно менять...
Халява. Крышка вообще руками отщёлкивается. Не то что у 201 и. 124
excellent vid....thanks