Perfect, Easy Finger Joints - Table Saw Jig (no dado)
HTML-код
- Опубликовано: 26 сен 2024
- In this video I make a simple jig for creating perfect finger joints or box joints via an easy to make table saw jig.
Free plans available here: / 46648425
6mm grooving blade: geni.us/bvtVSCx (Amazon UK) please note, this fits my table saw which has a 30mm arbour bore - adapter rings and other blade sizes are available too
This video is supported by Milwaukee, check out their full range here: uk.milwaukeeto...
M18 Mitre Saw uk.milwaukeeto...
M18 18ga Nailer uk.milwaukeeto...
M18 Drill / Driver uk.milwaukeeto...
#woodworking #fingerjoints #joinery
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
HELP SUPPORT THE CHANNEL:
Support with RUclips channel membership: / @ragnbonebrown
Support with Patreon: / ragnbonebrown
Support with PayPal paypal.me/ragnb...
MY TOOLS:
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: www.amazon.co....
US affiliate store: www.amazon.com...
SHOP:
Etsy: www.etsy.com/uk...
teespring.com/...
LINKS:
Website: www.ragnbonebro...
Facebook: / ragnbonebrown
Instagram: @ragnbonebrown
Twitter: / ragnbonebrown
Email: ragnbonebrown@gmail.com
Second RUclips Channel (non woodwork videos): / keefykeef - Хобби
This is on my list of required shop jigs, I'm slowly making my way through the list.
Very clear and the grooving blade is the actual solution I was looking for after watching about twenty different videos.
I bought the same blade a month or so ago and made a similar jig. I’ve made a few jewellery boxes with it, it’s a great way to do them 🙂
Really excellent tutorial. Thanks. I built mine based on this today. First time I’ve made one and I’m well chuffed with the results.
Subscribed
So pleased someone works in millimetres....been away from imperial measurements so long it's all foreign now. Thanks ;-)
Such a nice fit! So satisfying to see a perfect joint with no voids - well done!
I've used a jig of this type for years. I put the tab on my side of the fence so I can see what is going on. Also I clamp both sides of a corner and cut both at the same time - saves some time and makes a better fit. If you cut the sides short and add a small strip of contrasting wood on each end, you get this beautiful ladder effect on the corners! Have fun!
Thanks Keith! I've looked at a looot of box joint jigs over the last few months and yours is probably the most digestable. And right in the nick of time as I have a cabinet project coming up
Very good tutorial on making a Finger Joint Jig! Very clear and patient instructions.
I always enjoy your videos. Oooh, grooing blade, I didn't know they existed! Thanks! I really must make one of these, I made one for the router table before I had a table saw. I've put on my to-do list!
Not a wood worker but like to see you demonstrate your craft.
Thanks for thismate .
Straight to the point. No bullshit.
What a relief.
Brilliant video and clear plans. Thank you so much. I’ve just upgraded my table saw and I will try and make this jig this week. Thanks again👍
That’s,the best finger joint jig so far. Nice and easy to make and use. Thanks very much for sharing the plans with everyone.
Hi Keith. Just come across this video but been subscribed for some time. The content is excellent - you are so down to earth, practical and explain in great detail. You are a credit to RUclips woodworking - thank you
Thank you so much
Great video Keith, I saw a Rob Cosman video where instead of wood glue he assembles the joint first and then applies a thin super glue. You don't have to worry about wood swelling or set up time, the super glue soaks right in.Because of the nature of the joint it's extremely strong. (No accelerant). I'v been using this method for a couple of months now and find it works really well. Love your videos, Keep up the good work.
Finger joints are so pretty! This is awesome!
Thank you very much for this information and the plans for the jig. Much appreciated.
Having the two fences is very clever
Coincidentaly, I've just bought that exact blade, hoping that it will work for finger joints. Happy to see that it DOES work. Thanks for the neat jig plans, they'll make life much easier.
Great vid as usual 👍👍👍
Such a clear explanation and very generous to supply free plans!
I’ve just ordered a 4mm kerf CMT blade and can’t wait to have a go!
Ingenius, thanks for teaching how to make this.
Very clean job. I love your tools.
Having just bought my table saw, jigs are on my list.
thank you,allways a pleasure jack.
Thanks a lot! With your permission I have downloaded the project. From Barcelona
Started looking at your channel today. Appreciating what I’m seeing, will subscribe. Thanks for the jig plan.
Thats brilliant Keith, I have seen loads more complicated jigs that don't give the results your does, and has I have the blade already this jig is going to be one of my up and coming projects... Cheers Paul
I enjoy watching your skills come to life. Thanks.🙂🙂🙂🌟
Great job! Nice that you have free plans as well!
Great video, great jig, free plans. What's not to like.
Many thanks Keith.
Very nice Keith, all I need now is a table saw.
Good looking jig, Keith. Thanks for the free plans.
Thanks for the video. I made my own and it works great.
This came just at the right time seeing as I am attempting to make my own tomorrow. This will save myself a lot of time figuring it out 👍🏻
Thanks, just what i need!!! That video was spot on!!
If you had made the jig less wide you could have put a stop block on the sled to make it easier to micro-adjust the finger fit.
A great piece of equipment. Thanks so much.
Great video, I'm looking forward to making one of these - thanks for the plans!
Simple and effective. Thanks Keith!
Thanks for the plans. Will be making one soon.
Thank as always great video stay safe ☕☕👍😷
3:10 the height of the blade does matter. You should be only cutting to the depth of the fingers of the joint in order to prevent tear out or otherwise you will be using a backer board all the time.
Nice finger joint jig Keith! Thanks for sharing the video with us!💖👌👍😎JP
The way you marked the triangles's tips to trim them down (:50-:55) reminds me of a remark made 30 years ago by a former student of James Krenov's. I made some marks similar to yours and told him to cut where I'd marked. He said, "Where? Here at the tarantula?"
Absolutely brilliant, my friend! Thank you for sharing.
Great quality video Keith. Well explained and a great simple jig. 👍🏼👍🏼👍🏼
Yes i enjoyed it.
Thanks👍👏👏👏
Great video, thanks for sharing!
Thanks Keith.
Nice one Rag!
You said that it doesn't matter how high the blade cut thru the fence at first but it really does matter. Later on when you lowered the blade to the thickness of your panels, that left a gap above your cut that caused chip out on the back side. If you had made the initial cut a little less or exactly the thickness of the final panels, then you would have a lot less chip out to clean up. Nice and easy to build jig otherwise.
Excelente projeto...congratulation!
Great video! Now I just need to convert MM to inches! No problem though...
Thank you so much!
Great Job!
I'm sure matthias wandell would have something to say about this lol.. I tried all the different jigs and I realised you actually need an accurate saw to start with. If it it works for your saw then great but mine not so
Spot on Keith👍
I really need to make one of these
Thank you 🙌
Excellent - thank you.
good job...love your videos
Good jig,thank you video
Nice video as always! A small tip: you can use the back edge of the saw table to glue the sledge square on the rails.
You can as long as your blade is set perfectly square to the table
(IMHO) Would be nice to see where you're going, when you start cutting, " this is the X piece", this the back piece etc?
Neat idea though, thanks.
That was a beautifully neat joint. I wish I had a full size table saw, I struggle on a hobbyist saw & box joints just about work but are a bit sloppy. Though I did CNC a good set (all 6 sides)
Hey how about a video showing a complete box, I got to the last side of the box and somehow made it backwards and it would not fit right. how do you keep track of the sides and order you are working on.
Thank you.
I'm not sure what's in Superglue "activator", but I just use a little spray bottle filled with tap water and it works perfectly for me
I wasn't aware of that, may try it some time
@@RagnBoneBrown You can also sprinkle baking soda on superglue to form an instant solid fill - useful on ill-fitting loose joints.
Hi. This is awesome. Well done. I have a Dewalt 7485 table saw that has 81/4 blade, is there a thick blade for this saw ? Please advise. Thaknks
Good video thanks.
gr8 video m8,nice jig.
Looks like a good one. Thanks for the free plans.
Thanks Keith, I'm having these plans and I shall be getting one of those blades - Matt at Badger Workshop has also mentioned it and as a UK [no dado saw owner] I'm keen to get into finger joints and this is my chance. Cheers.
Really helpful, cheers.
Hi, I'm just starting out into the world of woodworking, I found this a would like to explore this jointing method more. But I can't find the link to your plans, has it been omitted or am I missing something?
Hey, I just watched your 2017 video where you were making table legs without a lathe. I just wanted to tell you about Bourbon Moth Woodworking Make Your Own Lathe video. I hope you do not mind, I just thought about that. I love your work!
Love this! Anyone got any advise for a good table saw under £200?
Which of your power tools have been your favourite? Makita, Hikoki or the new Milwaukee stuff?
AMAZING!!
Do you think this blade could be used on a DeWalt 7485 table saw? The throat plate looks wide enough. Another thought - if being used with a sled could one not install the throat plate? Any help appreciated and thanks for your videos.
I can't see any reason why not 👍
A great vidio . Im having trouble finding the 6mm x 25.4 bore. Any ideas jim in uk .thanks chris.
You can get the same blade and just buy a ring reducer to adapt it to the 25.4mm bore
Alway enjoy your videos Keith. They’ve helped me in my business a lot over the years. With the box jig, do you think it requires a guard at the back to prevent injuries? Secondly, I’m really tempted by those CMT grooving blades. Are you happy with them? Ben.
Brill!
Excellent tutorial! What's with all the Red tools? I thought you were a Hikoki man. Anyway, thanks again for sharing.
Very clever mate, Just wondered what table saw you have, Thanks
Administer at254sb
@@RagnBoneBrown Thanks mate
I need to rack out my van with ply. Would one of those battery nailers be suitable?
Activator makes superglue brittle.
Thank you for this video. This is very helpful. Do you know if this blade will work for Dewalt Table Saw DWE 7485? I’ve been reading that this saw does not take Dado blades but wondering if this blade would be okay to use on it.
You said there were free plans in the description box below. There is NO description box
How can I get these I really like your finger joint jig and sled
There is a description box on every single RUclips video ever by default, and the link is in there 👍
www.patreon.com/posts/46648425
Nice.
I'm going to have a go at making this jig now I have a new table saw. However, I am confused by the figures on the blade. What is the difference between CMT 240.060.06 and CMT 240.020.06, apart from the price?
020 is 2mm kerf 060 is 6mm. It's shown on the blade
@@RagnBoneBrown What about the 240 and the 06, please?
Would you recommend always using hardwood for the pin and runners or was that just what you had on hand? If yes, I'd love to understand why as I'm very new to woodworking. I bought my first table saw recently and would love to try something like this for practice but most of my scraps are plywood, pine or old firewood the previous occupants left in the back of the garden, so I've no idea what it is!
Hi Claire, hardwood is more hard-wearing, so should last longer, but honestly softwood like pine will be absolutely fine! Cheers, Keith
The cut you made here, 6:21 is not good. The one side of the box frame is higher than the other side. The cut is off.
And about that, how is your ”dustdrawer” for the mitresaw work? I remember your dramatic video when building...Planning to build if working ok. Thanks and keep them coming!
Yeah it works well but it's bigger than it needs to be
Thanks for the plans. Where does one find your blade guard? How well does the dust extraction work with it?
It came with the saw. I explain about dust extraction performance of the saw here ruclips.net/video/gvBQCAHtEGo/видео.html and also here ruclips.net/video/nC7_fgojpy4/видео.html
I blame this video for this being out of stock. There's a more expensive 180mm version but I don't think that'd be necessary since it's for finger joints in box making material...
-Enjoyed it, that was wonderful Keith. I went and bought the flat tooth blade you have from Amazon. I've got this now but just noticed your table saw blade gap plate thing. Did you make this for using with this blade. I do apologies Keith, I'm really, really new to woodworking and love watching all you guys making it look easy. Thanks for this x
Yeah I have a vid about it on my channel posted a few months back 👍
@@RagnBoneBrown Thanks Keith, I must have missed that one... Only had my table saw few weeks.
Hows the table saw performing? Are you happy with it? Cheers! ;)
Yes very happy with it now the dust extraction set up is sorted
Great video. Thanks for sharing. You explained everything very well. So also here some thumbs up for that. I'm going to download the plans.
I want to make this jig but at the moment I hardly have time for woodworking. How long did it take you to make it? (I'll need four times more time, I guess)
Can this also be done with a regular blade (kerf 3-4 mm) and no flat teeth? Lately I saw a YT video on making a perfect piece of wood which is exactly the width of the
kerf, without any measuring. Unfortunately, I can't find it back at the moment.
Cheers Hans. Only about 3 hours to make I think. You can do it with regular blade but if no flat teeth you'll have some tiny gaps. You could potentially get a blade re ground by sharpening company to make the teeth flat - another option! 👍
@@RagnBoneBrown Thanks for your reply and explanation. That last option is something to think about. The local shops where I buy hardware and utensils offer a sharpening service. But due to the lock-down they are closed. Hopefully they'll open soon because all the non-food shops are already closed since December 17th.
I 've just found back the video on making a shim with the exact width of your saw blade without any measuring.
ruclips.net/video/nsw5qlrdx2A/видео.html