Yea! I finally got Inkscape downloaded with a little help from a stranger on Facebook. Today I'm watching your You Tube videos. Challenge 1 a success! Thanks so much!
Thank you so much!!! I was so frustrated with Design Space (glitchy and crashing) so I downloaded Inkscape. Somehow I got myself stuck on an eraser tool (that wasn’t even erasing) and was again frustrated, but knew this time it wasn’t the software’s fault- I just needed to learn how to use it and not try to figure it out myself. I’m now starting with your challenge number 1 and taking notes (with actual pen and paper) on the keyboard shortcuts! Thank you so so so much! I found your channel through a comment on Reddit where other people were complaining about design space and someone recommended Inkscape and your channel for learning it! :)
I know this video is from a long time ago but I am new to Design Space and Inkscape. I watched your lovely long and educational video on the basics of Inkscape and now have done Challenge 1. I have learned so much. Thank you!
Fabulous teaching! Last step was tricking me. I just could not move the Challenge 1 shape onto the Design Space canvas. "Rinse, repeat, rinse, repeat..." Still nothing. Finally I found that shape hiding many inches lower on my screen, and moved it up to the top left corner. Success! Thank you so much, Troy!
Finished Challenge 1 granted I am back-stepping cause I fist tried learning how to convert a photo to svg. liked your videos so much so I have decided to start from challenge one and go through them all. I think what I like best is being able to view them anytime cause it sometimes takes me more than one viewing to remember what to do. These are very clear, easy instructions. thanks again.
I had Inkscape installed on the computer this week and started watching the first videos. Today I did the first challenge. Thank you for the step by step tutorials!
Challenge 1 Completed. Newer Version in 2019 but was so clear that it was easy to follow along which I did by pausing and doing on my screen right along with you. THANK YOU! Now Challenge 2
Successfully completed challenge 1 almost 3 1/2 years after this video was posted. I'm impressed that the instructions are still relevant. On to challenge 2!
Completed the challenge 1 today, tagged you in my post to your group. It is great that a video posted back in 2015 is still helping people in March of 2017
after hours of trying to get inkscape downloaded along with the XQuartz for Mac (this caused me the most issues) I finally got inkscape to open and i completed the 1st practice! so excited. can't wait to try the next one! Thank you so much.
Thank you so much Troy. I downloaded inkscape almost a year ago and it has just been sitting on my desktop unused. I have opened it a few times but I get so overwhelmed just looking at it that I would close it up. I finally decided that it was time to figure it out. I have pretty much maxed out what I can accomplish in DS without help of another program and there is just so much more I want to do. I finished challenge 1 and I am so excited and proud of myself. Also, I am not as scared of inkscape as I was before. And I owe it all to you. Thanks again, you rock!!!
I just want to thank you for teaching us how to use Inkscape to design .svg files for design space. I didn't even know what design space was let alone how to use it but I have created an emojii and uploaded it successfully . Thank you, thank you!!
Apparently I'm a bit late to the party, but THANK YOU for this!! I've just watched this video, & plan on watching the rest soon! I have a tiny bit of experience with Inkscape, but not much, & your video was very helpful. It looks a bit different from your screen to mine, but I'm on a Mac, & considering I'm here 5 years after the fact, I guess a few things have changed. REALLY looking forward to watching your next videos & completing the challenges!!
Mr. Troy, This tutorial/challenge#1 was amazing! This was by far better than an in class training I had a few years back. I went right along with you and wrote down my notes and boom...it uploaded right into Design Space! Looking forward to the series. Thank you
Thanks for the tutorial, I use Silhouette cameo, I couldn't upload the SVG file so I decided to save a format compatible with my machine (PNG), then, I imported the file and traced it and looked good. I hope I can do the same with more complex designs. Thanks
Thank you I get tons of people who want to Learn Inkscape. I follow your videos all the time I love them. thank you for making it so easy to learn :D Now they can look forward to learning by these steps and I'll learn more as well thanks once again
I had to hit the pause, rewind buttons several times but got through challenge 1 (except I can see the stroke, it’s a shade darker then the fill) until I upload to design space, my little person had weird bits poking off the sides in the view. I redid, same thing but went on and inserted to my canvas. Looks great, but I don’t know if it will cut properly because I’m in the UK and my brand new Maker is waiting for me at home in Canada. Thank you for the challenge. Much easier for me then the ‘live’ tutorials.
I'm finally starting my journey with inkscape! I have had SOOO many people recommended you! Very thankful that you are willing to help, most places want money to teach these things. :-( I completed challenge 1 because of your video! Thank you again! July 2020
Just followed along and finished Challenge #1. I can't wait to do the rest. You make it look so easy. I had such trouble with a Air Force logo and a Denver Bronco logo. I hope to figure out how to fix those after getting the hang of Inkscape. Thanks.
Your tutorials are so very helpful ! We are lucky to have someone as knowledgeable as you to help us with Design Space. If you are not on Cricuts payroll you should be !!!
Hello, I just downloaded inkscape today. I saw your video's listed on facebook and decided to try challenge #1. I really learned some of the basics and I am looking forward to watching the other video's in this series. Thank you!
You was recommended on a Cricut group. Thank you, I don’t have Inkscape yet bu, I took lots of notes. I will be downloading today and will continuing with your tutorials.
Thanks for the super easy video! It's just what I needed as a beginner. Thanks for keeping it simple. I've learned sooo much already. I followed along in Inkscape as you suggested and now I'm ready for challenge 2.
thank you Troy for all the lessons you do for us. I'm was wondering if sometime in the future do you see if you're going to type a sheet up so we (me) can read, watch and follow along with you . yep I'm one of those kinda a gal. again thank you
Thank you so much for this first very basic video. I look forward to watching them all b/c I'm REALLY wanting to learn Inkscape and had just about given up. All of the videos I have watched so far had me more confused and frustrated. I finally feel like I understand the program better after only 2 of your videos. I'm pretty techy and just couldn't understand why I couldn't get the hang of it, but I think I'm going to do just fine now. Thanks a bunch!! P.S. I peeked at some of your other videos and saw the one of the WV logo. Born and raised in WV right outside of Morgantown so that's one I'm going to enjoy ;)
Great learning opportunity still being used in 2020. Only think I can't do is drag a box around the objects to select them all. I have to ctrl + Click on each object. I'm on a different version of Inkscape so maybe that changed.
Thanks SO much! I hate just learning "step-by-step" processes. I want to UNDERSTAND the process and your videos are helping me with this. Thank you for the clear and concise information :-)
Just found out my local library has a laser cutter (Glowforge) and all I have to do is send my files to them and they will etch/burn my designs and laser cut whatever my project happens to be for FREE! They even provide the material. The only thing I have to do at this point is learn how to do all that stuff because I'm a total newbie or maybe it's a luddite, whichever is the more clueless re:computers! I did manage to get Inkscape. I clicked around on stuff and now there is a shortcut on my desktop. (Don't ask me how to do that, 'k?) Anyway, I just finished watching two of your videos and have picked up some great info already. To quote Ahnold-"I'll be bahck" Thank you.
This was great Troy, I learned so much, of course I had to start over many times, but thank you. Your lesson and examples were very easy for me to follow. On to the next lesson.
@Troy can you direct me to the very first video I need to watch to get started in Inkscape? I just heard you say the basic video. I want to start there, but you have so many! Thanks!
Loving your videos! The only thing I couldn't do for Challenge 1 was when using the node editor. The nodes on your square were small diamonds in each corner. The nodes on mine were two small squares and one circle, with the fourth corner not having a node at all. How can I fix that?
Thank you so much! Very easy to follow! I am only having one issue, once I uploaded it in DS, and added it as my images, I'm getting a huge blank square with a red circle, white X on the top left corner. Not sure what I'm doing wrong, unless I need to clean out cookies, because I did forget to save as a plain svg when I originally saved it.
Troy, your videos are SOOO helpful!! Thank you!!! I have a question for you - I looked thru some comments & didn't see it asked... why do we save as a Plain SVG instead of the default Inkscape SVG? Is there a difference? Would DS have trouble with an Inkscape SVG?
Thank you Troy for all your videos, I'm so happy I found your channel! I'm having trouble with the first challenge :( When I try to draw the shape, I do not get the editable object. I only get a grey outline when I click off of it, I can not click back on it to move it OR edit it. I feel like I must be missing something, any advice would be so appreciated. Thanks!
Update......You are so good, I kept watching the challenge videos and learned what I needed to do! I'm really soooo happy I found your videos! Thank you!
Hi sir, Can you give a complete tutorial on how to convert and image file like png, jpeg etc to SVG file with some small resolution and colour changes?
Thank you for your videos, they are so great to learn how to use Inkscape! I would like to practice on Inkscape along with your videos but all the commands in the drop-down menus are greyed out so i can’t use the software at all. Do you happen to know why? I use Windows 10 64/bit. Any help on this issue would be wonderful. Thank you.
This tutorial is brilliant and I am looking forward to what more you have to share. BUT ... when I imported the file into Cricut Design Space, the image was huge and way off screen, had to go 'hunting for it' ... SOS.
@@TroyTube Thanks Troy ... but 'I' just figured it out where I went wrong (I had a 'grey hair' moment'). It would of helped (greatly) if I resized the image first within Inkscape! Not one of my prouder moments - *hanging head in shame* - lol.
Squeeeellll OOOOhhh thank you, thank you, thank you. (that's me jumping up and down) This is exactly what I needed.... One further question. How would you center the star with the trapezoid like you can in Design Space?
yo i just want to say thank you very much your videos are what i need . i greatly appreciate you.ps youre not boring but perfect for a pot head. lol smooth understandable knowledge delivered by a inkscape gangster
Thank you for the video Troy. I am quite new at this and tried to follow exactly what you show. However, when I try to draw the square I get a square but only in dotted lines sometimes even a rectangle even when pressing ctrl shift. If I try to draw a circle I also get the same square in dotted lines no color. What did I do wrong? I try to fill with color but nothing happens. I have a cricut machine and I'm dying to learn this. Can you please help? Thanks!
Hi, I am doing your first video..several times. I am saving the object to path. However DS is saying "Unsupported SVG items will be dropped. Text elements. I did the video several times. Saving as plain svg. What am I doing wrong. Do I need to change a setting in DS?
I need some serious help. Just downloaded inkscape, but when I try to draw a shape, (circle, square or such), it has a box, but I can not see the shape. What am I doing wrong??? Please, give me some help.
Yea! I finally got Inkscape downloaded with a little help from a stranger on Facebook. Today I'm watching your You Tube videos. Challenge 1 a success! Thanks so much!
Thank you so much!!! I was so frustrated with Design Space (glitchy and crashing) so I downloaded Inkscape. Somehow I got myself stuck on an eraser tool (that wasn’t even erasing) and was again frustrated, but knew this time it wasn’t the software’s fault- I just needed to learn how to use it and not try to figure it out myself. I’m now starting with your challenge number 1 and taking notes (with actual pen and paper) on the keyboard shortcuts! Thank you so so so much!
I found your channel through a comment on Reddit where other people were complaining about design space and someone recommended Inkscape and your channel for learning it! :)
Completed Challenge 1! Your video has very clear instruction and would highly recommend it to all new Inkscape users! Great job...onto Challenge 2!
I know this video is from a long time ago but I am new to Design Space and Inkscape. I watched your lovely long and educational video on the basics of Inkscape and now have done Challenge 1. I have learned so much. Thank you!
Fabulous teaching! Last step was tricking me. I just could not move the Challenge 1 shape onto the Design Space canvas. "Rinse, repeat, rinse, repeat..." Still nothing. Finally I found that shape hiding many inches lower on my screen, and moved it up to the top left corner. Success! Thank you so much, Troy!
Finished Challenge 1 granted I am back-stepping cause I fist tried learning how to convert a photo to svg. liked your videos so much so I have decided to start from challenge one and go through them all. I think what I like best is being able to view them anytime cause it sometimes takes me more than one viewing to remember what to do. These are very clear, easy instructions. thanks again.
I'm 4 years tardy to the party but I want to learn Inkscape and we begin at the beginning. This video worked great for me. Thanks so much Troy!!
I literally can't tell you how MUCH your video is helping me with inkscape!!!!! O gosh you are a great teacher! Thank you Mr. Troy!!!!
I had Inkscape installed on the computer this week and started watching the first videos. Today I did the first challenge. Thank you for the step by step tutorials!
Challenge 1 Completed. Newer Version in 2019 but was so clear that it was easy to follow along which I did by pausing and doing on my screen right along with you. THANK YOU! Now Challenge 2
Thank You for helping us newbies!! It is sooo much easier when you can pause the video and go back and replay...you are a great teacher!!!
Successfully completed challenge 1 almost 3 1/2 years after this video was posted. I'm impressed that the instructions are still relevant. On to challenge 2!
Completed the challenge 1 today, tagged you in my post to your group. It is great that a video posted back in 2015 is still helping people in March of 2017
Oh, Thank you for helping us!! wow, you are one great teacher. I will be following you!!
Thanks!! You make learning inkscape so easy and fun! Thanks for the challenge
after hours of trying to get inkscape downloaded along with the XQuartz for Mac (this caused me the most issues) I finally got inkscape to open and i completed the 1st practice! so excited. can't wait to try the next one! Thank you so much.
Thank you so much Troy. I downloaded inkscape almost a year ago and it has just been sitting on my desktop unused. I have opened it a few times but I get so overwhelmed just looking at it that I would close it up. I finally decided that it was time to figure it out. I have pretty much maxed out what I can accomplish in DS without help of another program and there is just so much more I want to do. I finished challenge 1 and I am so excited and proud of myself. Also, I am not as scared of inkscape as I was before. And I owe it all to you. Thanks again, you rock!!!
Awesome!
Today is my birthday and my husband bought me a Cricut. This was very helpful to get me started on the right path. Challenge 1 complete. :)
I just want to thank you for teaching us how to use Inkscape to design .svg files for design space. I didn't even know what design space was let alone how to use it but I have created an emojii and uploaded it successfully . Thank you, thank you!!
Apparently I'm a bit late to the party, but THANK YOU for this!! I've just watched this video, & plan on watching the rest soon! I have a tiny bit of experience with Inkscape, but not much, & your video was very helpful. It looks a bit different from your screen to mine, but I'm on a Mac, & considering I'm here 5 years after the fact, I guess a few things have changed. REALLY looking forward to watching your next videos & completing the challenges!!
Mr. Troy, This tutorial/challenge#1 was amazing! This was by far better than an in class training I had a few years back. I went right along with you and wrote down my notes and boom...it uploaded right into Design Space! Looking forward to the series. Thank you
Challenge 1 completed. Newer version in 2019 but managed. Had to stop video a few times. Excited to move on to next video. Thank you!
Thanks for the tutorial, I use Silhouette cameo, I couldn't upload the SVG file so I decided to save a format compatible with my machine (PNG), then, I imported the file and traced it and looked good. I hope I can do the same with more complex designs. Thanks
Thank you I get tons of people who want to Learn Inkscape. I follow your videos all the time I love them. thank you for making it so easy to learn :D Now they can look forward to learning by these steps and I'll learn more as well thanks once again
I was able to watch your first challenge and then go into inkscape and do it. Thank you.
I had to hit the pause, rewind buttons several times but got through challenge 1 (except I can see the stroke, it’s a shade darker then the fill) until I upload to design space, my little person had weird bits poking off the sides in the view. I redid, same thing but went on and inserted to my canvas. Looks great, but I don’t know if it will cut properly because I’m in the UK and my brand new Maker is waiting for me at home in Canada.
Thank you for the challenge. Much easier for me then the ‘live’ tutorials.
Challenge 1 done! Stopped and re-watched, but now I know that! onto Challenge 2 thank you Troy!
Challenge #1 done....Yeah!!! Thanks Troy
I'm finally starting my journey with inkscape! I have had SOOO many people recommended you! Very thankful that you are willing to help, most places want money to teach these things. :-( I completed challenge 1 because of your video! Thank you again! July 2020
Thanks! I really like having the chance to pause, try, play, pause, etc.
I enjoy watching you videos Troy!
Just followed along and finished Challenge #1. I can't wait to do the rest. You make it look so easy. I had such trouble with a Air Force logo and a Denver Bronco logo. I hope to figure out how to fix those after getting the hang of Inkscape. Thanks.
This was a very easy video to follow. Thank you. Just ordered my Cricut Air 2 and really want to learn Inkscape .
You are an incredible teacher, thanks
Thanks for breaking Inkspace down into manageable chunks! You're a great instructor!
Thank you Troy!!! Just finished the first challenge!
Just finished Challenge #1. Had to go back and watch video sections - very helpful
Your tutorials are so very helpful ! We are lucky to have someone as knowledgeable as you to help us with Design Space. If you are not on Cricuts payroll you should be !!!
Hello, I just downloaded inkscape today. I saw your video's listed on facebook and decided to try challenge #1. I really learned some of the basics and I am looking forward to watching the other video's in this series. Thank you!
Thank you! Just starting out and your videos are so helpful. Not feeling so overwhelmed now!
You was recommended on a Cricut group. Thank you, I don’t have Inkscape yet bu, I took lots of notes. I will be downloading today and will continuing with your tutorials.
Thanks for the super easy video! It's just what I needed as a beginner. Thanks for keeping it simple. I've learned sooo much already. I followed along in Inkscape as you suggested and now I'm ready for challenge 2.
Woohoo challenge one complete! Thank you
Challenged completed...thank you so much for your step by step tutorials!! I appreciate these very much!
thank you Troy for all the lessons you do for us. I'm was wondering if sometime in the future do you see if you're going to type a sheet up so we (me) can read, watch and follow along with you . yep I'm one of those kinda a gal. again thank you
Thank you so much for this first very basic video. I look forward to watching them all b/c I'm REALLY wanting to learn Inkscape and had just about given up. All of the videos I have watched so far had me more confused and frustrated. I finally feel like I understand the program better after only 2 of your videos. I'm pretty techy and just couldn't understand why I couldn't get the hang of it, but I think I'm going to do just fine now. Thanks a bunch!!
P.S. I peeked at some of your other videos and saw the one of the WV logo. Born and raised in WV right outside of Morgantown so that's one I'm going to enjoy ;)
+wvsrp we grew up in the Charleston area but now live in Louisville
Great learning opportunity still being used in 2020. Only think I can't do is drag a box around the objects to select them all. I have to ctrl + Click on each object. I'm on a different version of Inkscape so maybe that changed.
I am going to try these tutorials (just got DS), and WILL tag you and post. Thanks for the help!
Thanks, Troy ... you're a great teacher.
Love all your videos, so very helpful!!
Thanks SO much! I hate just learning "step-by-step" processes. I want to UNDERSTAND the process and your videos are helping me with this. Thank you for the clear and concise information :-)
Thank you so much. Your videos are super helpful to visual hands on learners like me.
Complete! Thanks so very much for being such a great teacher. Off to the next challenge...
I DID IT!! thanks to you! It may not be the prettiest YET I will remake it & upload that to the facebook group! :) Thank you Troy!
Just found out my local library has a laser cutter (Glowforge) and all I have to do is send my files to them and they will etch/burn my designs and laser cut whatever my project happens to be for FREE! They even provide the material. The only thing I have to do at this point is learn how to do all that stuff because I'm a total newbie or maybe it's a luddite, whichever is the more clueless re:computers! I did manage to get Inkscape. I clicked around on stuff and now there is a shortcut on my desktop. (Don't ask me how to do that, 'k?) Anyway, I just finished watching two of your videos and have picked up some great info already. To quote Ahnold-"I'll be bahck" Thank you.
Thank you. Challenge completed.
thanks for the help I'm on to the next challenge!
Great tutorial thank you so much for sharing
Challenge #1 completed. Thank you for this!
This was great Troy, I learned so much, of course I had to start over many times, but thank you. Your lesson and examples were very easy for me to follow. On to the next lesson.
Thanks so much for all your help!! Can't believe I did it! Love your videos.
First, thank you so much for your thorough yet easy style of teaching. Challenge #1 done! Thanks so much, now off to #2
Thank you for the clarity and simplicity in guiding beginners like me. This is so helpful, and I truly appreciate it!
+Jee Papeterie Thank you for your kind comments and for watching!
Thanks so much, I just uploaded Inkscape 9.1 and this tutorial was really good. I was able to upload my image into DS. Onto challenge 2
thank you, thank you, thank you, this is awesome, the challenge is certainly a motivator to try doing new things
@Troy can you direct me to the very first video I need to watch to get started in Inkscape? I just heard you say the basic video. I want to start there, but you have so many! Thanks!
Great video Troy, the only problem is that I have a silhouette cameo. I saved it, however, I can't find it in my files.
This was great. did my first challenge.
Thank you! now on to the next challange. I am so excited lol
I have learned a lot from these videos.
Completed challenge 1. Thanks for this tutorial
Thanks! I was able to complete challenge1 today
Thank you...I could follow along.
Challenge one completed! Thanks so much for these videos! I'm excited to keep learning about Inkscape!
Thank you for this great tutorial I want to learn how to make SVG files for my cricut and need to learn Inkscape. Very easy to follow.
So glad I found this video! It sure helped overcome my cold feet to start using Inkscape; Thank you.
This was perfect Troy!!! Thanks so much. I did it first try perfectly!
Loving your videos! The only thing I couldn't do for Challenge 1 was when using the node editor. The nodes on your square were small diamonds in each corner. The nodes on mine were two small squares and one circle, with the fourth corner not having a node at all. How can I fix that?
Thank you so much! Very easy to follow! I am only having one issue, once I uploaded it in DS, and added it as my images, I'm getting a huge blank square with a red circle, white X on the top left corner. Not sure what I'm doing wrong, unless I need to clean out cookies, because I did forget to save as a plain svg when I originally saved it.
Troy, your videos are SOOO helpful!! Thank you!!! I have a question for you - I looked thru some comments & didn't see it asked... why do we save as a Plain SVG instead of the default Inkscape SVG? Is there a difference? Would DS have trouble with an Inkscape SVG?
Challenge 1 completed! Baby steps.
Troy thank you for the tutorial. I was able to complete challenge 1
Thank you! Love your videos, they are so helpful.
Thank You!! Loving the challenge!! :)
Challenge one done. Great job! Where do we post a photo?
You can post it in any craft Facebook Group but I have a new group you should join if you haven't already. facebook.com/groups/craftingcentral
Thank you Troy for all your videos, I'm so happy I found your channel! I'm having trouble with the first challenge :( When I try to draw the shape, I do not get the editable object. I only get a grey outline when I click off of it, I can not click back on it to move it OR edit it. I feel like I must be missing something, any advice would be so appreciated. Thanks!
Update......You are so good, I kept watching the challenge videos and learned what I needed to do! I'm really soooo happy I found your videos! Thank you!
Hi sir, Can you give a complete tutorial on how to convert and image file like png, jpeg etc to SVG file with some small resolution and colour changes?
Thank you for your videos, they are so great to learn how to use Inkscape! I would
like to practice on Inkscape along with your videos but all the commands in the drop-down menus are greyed out so i can’t use the software at all. Do you happen to know why? I use Windows 10 64/bit. Any help on this issue would be wonderful. Thank you.
This tutorial is brilliant and I am looking forward to what more you have to share. BUT ... when I imported the file into Cricut Design Space, the image was huge and way off screen, had to go 'hunting for it' ... SOS.
Watch this ruclips.net/video/YBPBPTozliM/видео.html
@@TroyTube Thanks Troy ... but 'I' just figured it out where I went wrong (I had a 'grey hair' moment'). It would of helped (greatly) if I resized the image first within Inkscape! Not one of my prouder moments - *hanging head in shame* - lol.
Squeeeellll OOOOhhh thank you, thank you, thank you. (that's me jumping up and down) This is exactly what I needed.... One further question. How would you center the star with the trapezoid like you can in Design Space?
+luxurycardstore We'll get there in another video, but CTRL + SHIFT + A shows the Align panel.
Thanks!
Challenge 1 completed. whew after 4 attempts. It was my fault you said union and I grouped. On to challenge #2
wow I'm learning alot thank you so much for doing these videos :)
yo i just want to say thank you very much your videos are what i need . i greatly appreciate you.ps youre not boring but perfect for a pot head. lol smooth understandable knowledge delivered by a inkscape gangster
Thank you so much for doing this.
Thank you for the video Troy. I am quite new at this and tried to follow exactly what you show. However, when I try to draw the square I get a square but only in dotted lines sometimes even a rectangle even when pressing ctrl shift. If I try to draw a circle I also get the same square in dotted lines no color. What did I do wrong? I try to fill with color but nothing happens. I have a cricut machine and I'm dying to learn this. Can you please help? Thanks!
Hi, I am doing your first video..several times. I am saving the object to path. However DS is saying "Unsupported SVG items will be dropped. Text elements. I did the video several times. Saving as plain svg. What am I doing wrong. Do I need to change a setting in DS?
Thank you - this video really helped
Even when I hold the ctrl + Shift it does not work. Does not keep it symetrical. What am I doing wrong? I have the newer version
I need some serious help. Just downloaded inkscape, but when I try to draw a shape, (circle, square or such), it has a box, but I can not see the shape. What am I doing wrong??? Please, give me some help.
Thank you so very much!!