Episode 59 LEDs! Sequential tail lights & dash lights for Mustang Autorestomod
HTML-код
- Опубликовано: 28 июл 2024
- • SPECIAL! Episode 58 Pa...
Sponsor: National Parts Depot
Episode 59 Mustang Project's LED lighting for Mustangs Autorestomod
Home page: www.autorestomod.com
Rate, ask questions, we are very good about responding!
Mentions:
www.mustangproject.com
www.hipoparts.com
www.nationalpartsdepot.com
This week we install some LED dash lights as well as rear sequential and front LED turn lights in our weekend warrior '68 Mustang hardtop. Хобби
u guys make those front led's instalation so easy, but I bet behind the scenes there was some kussin!!! Small hands and some patients here no doubt
True, new bulbs are brighter, but not enough in many cases. The bulbs in the '68 panel were all functioning and when we pulled them they all looked recent (enough that we couldn't bring ourselves to throw them away). Won't say they were new but none were grayed like old bulbs can be. We are sold on LEDs in the Ford stuff especially in cars like the '71-'73 and Fairlane/Torino where the lighting was never much to write home about. For the record no JD was hurt in the filming.
@JeremyBlakeNettles We appreciate the offer Jeremy, however we have Gina's '65 that covers that base. But we are glad that you watch! Keep us up on what your are doing and if there is anything we can cover to help you out!
Thanks for posting, this video was very informative. I have those tail lights, I am happy to see that they work so well and make an incredible improvement over the stock. Get Lit!
You can buy the lights from several places. Many of the aftermarket lights are of a smaller diameter and you'll need o-rings to make them stand off the socket correctly. Also be advised that the metal on the light is pretty soft and can be bent. As for LEDs check with your local authorities on usage of the outside LED lights.
We have had situations where the bulb has two elements in it and one will burn out while the other is OK. Also, do a continuity check from the switch to the back of the car using a test light and long lead. You should be able to determine if you have a bad wire doing that.
The guys at West Coast Classic Cougar sell a replacement that I highly recommend. Part number: 5870. Good luck!
LOL We'll contact Allan at Mustang Central this week and see when we might do a cowl. Keep your eyes peeled!
Love your videos!
@turbocobra Not sure on the EZ. I've not really had any dealings with their product. But looking at Vince and Gina's '65 I have a feeling we'll be needing SOMEBODY's harness for that car. Some harnesses want you to retrain the original sockets for the lights. So that might be the case.
Pretty much. The '71-'73 will be harder to separate as it is glued.
haha thanks. you guys are awesome! you know what would be great? a tutorial on how to repair the cowl. it's rainy season in Sacramento and i found out my cowl leeks due to rust. gotta replace it :/ .
We are waiting on a car at Mustang Central to do just that. Oddly the '65 hardtop, with all its issues has great cowls...Who knew.
Thanks for the video! Looks like some real funny business going on there with the JD! Good job on the scripting and editing. Just the right amount to make the video entertaining. We just did the mustang project shelby lights in our 65, frenched them in for mounting on the inside. We also have a EZ wiring harness. Any thoughts on how to EZ harness will connect to the mustang project shelby sequentials? Thanks Gary
@AutoRestoMod thanks ! much needed
@xig08B6 Thanks! All we ask is that you guys and gals get on the car forums and talk about us.
Pop out to the internet and find a general automotive LED re-seller. If you have the bulb number they will usually have a cross reference available.
thanks for the vids guys
LOL sorry, yes. it is in the trunk on the drivers side in the well next to the gas tank.
It would be amazing if NPD or another supplier would offer a complete Lighting LED replacement kit. It is so time-consuming to research the light for every single option. I would pay good money for an entire kit for my 67 convertible!
Have you run into a situation when the actuall brake light function does not work .....but the blinkers, turn signal, reverse light and running lights are working fine? there all in one housing also. ive checked the brake switch and has power and fuse is good.
should both wires to the brake switch have power? and in the trunk i have green, brown, and yellow i believe in color wires now should all of them have power?
LOL It took a while to figure it out. The worst part was the original bulbs! Almost no room to get Jeff's fat fingers in the main opening and around the bulb. He even considered just busting the bulb.The LEDs actually went in easier than the stock stuff.
well i can't wait for that! if you can't find one. i would be happy to donate my '68 cougar! :) lol
No i mean where can find the actual part on the car. Is it the trunk also?
would it be the same way on a 72 mustang?
hey, on a 1968 cougar. where can i find SEQUENTIAL TURN SIGNAL RELAY. Basically the only thing that wasn't working is that. i want the sequential lights to work. i want to re wire the hole car but the hole kit is like 600! THANKS!
are there specific bulbs you have to use for your dash lights? i have a 1978 datsun 280Z. I want to change my interior lights to LED's but i don't know if there are specific bulbs i need.
Hey guys, My 66 mustang is almost done but i dont like the way it sits. The front end is significantly higher than the back, i was wondering if it would be wise to cut the coil springs in the front or just get a new pare that lower the front end. It is a inline 6 and i can only seem to fin V8 springs. what should i do ?
can u just buy any old LED lights from say canadian tire or something? or do they have to be special dash lights for the car?
Hey I need help. I installed leds in my instrument cluster only. No where else and I'm getting this sort of crackling noise and then a ping and it repeats. Now I don't know if this is because I need some sort of led flasher. What do you think?
We'd check and make sure you don't have any loose ground or 12 volt wires in the dash. Grounds will arc, as will loose 12 volt wires.
Hey for the front parking light LED’s where did you get those? They go from white to amber?! How cool is that... I would like a pair for my ‘65!
Mustang Project: www.mustangproject.com/
That old man is awsome
ive got a 73 f100 ive changed all the lights to l.e.d but my turn signals wont work they stay solid in the truck i changed both flasher relays to electro magnetic stiil nothin. but if i leave the originals bulbs in they work what should i do?
Is the new flasher LED compatible? Some aren't. We'd suspect that first.
yes they both are
Do you have a link for the LED dash bulbs you used?
www.hipoparts.com/
@saxophoneman0024 We'd recommend contacting Eaton Detroit Spring (313) 963-3839 The can set you up with fresh springs that are designed to work on your six. Cutting coils will result in a higher spring rate and we don't recommend doing it.
What happens when the 4 way hazards are on?
They work fine.
how much are the led sequential tail lights
+Anthony Wilcox hwww.mustangproject.com sells them for around $200 depending on the style.